Change the Message class (OB28) for validations

Hi Experts,
I was trying to change the Message class (OB28) for validations which are created last 1 year ago, as we have two Validations where each validation has 15 to 16 steps in it. One validation starts with Y & another with Z. Both are using the same message class as of now.
But we want to use different message class for validation which starts from Z. We tried changing from program RGUGBR28 but it will change the message class for the both validation which starts from Y & Z, we need to change to only one validation.
Please let me know any way out for this.
Thanks & regards,
Shilpa

Hi Shilpa,
The message class during the maintenance of a validation, it is not changeable because the message class is not attached at the individual validation but at the entire validation class, that is a combination of application and call time.
During the first creation of a validation at the moment of "document line item" in application "cost accounting" the message class is asked for and these then for the entire validation class, stored in this case "001" in the table GB02C and from now is no more changeable.
The reason for that is, that a change affects all validation of a grade just globally and that even cross-client, since the GB02C is not client-specific.
I hope this helps.
Regards
Ravinagh Boni

Similar Messages

How to change message class selected for validation ?

Dear all,
For testing, I have created a new validation (applic. area : FI, Callup point:2) with a existing message class (/EACA/BTA_GL).
But now, I would like to create a new validation for the same application area and callup point, but with another message class (that I have created with Z_...).
But unfortunately, I cannot choose another message class when I create a new validation.
Could you help me ?
Thank you and best regards

To change the message class of a callup point please use program
RGUGBR28 (description in SAP note 6975). After making the change,
generate the coding with program RGUGBR00 for the application (without
marking the last two checkboxes).
kind regards,
Diogo Peretti.

How do we change the message retention period for XI ??

HI Frnds,
The current set up is to retain the message for 24 hours. Where do we need to change this?
Regards,
Raja Sekhar

Check this guide:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50
Also check
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0068bc1-6f8c-2a10-52bb-c6ee3562feb2
Regards,
Ravi

Translation of message class used in validation

Hi all,
we are having troubles with the translation of the message class(es) used in validation. In our system environment, we have 2 development clients. One has logon language german, the other italian. Both clients are allowed to maintain their own customizing and with this add new messages to the message class used for validation, if necessary. Now, what happens is this: Whenever a message is added, the original language of the message class is switched to the logon language of the current user. This is nasty because after changing the original language we have to confirm the translation of every message in the message class. How do you organize translation of the message class used in validation?
Thanks for your ideas, kind regards, Kathrin.

Hello Kathrin,
Don't change the Original Langague. Maintain the new messages in the Original Langauge of the Message class and translate to the desired langague.
Vasanth

How to change the message in a cell of a ssrs report to a hyperlink dynamically

Hi,
I am developing a ssrs report.
I want to change the message to hyperlink for a particular message and not all messages of a column.
and link it to another report.
for e.g-if a cell of the column has values A,B,C then I want to change only cell with values C as hyperlinks and not A and B

Hi fanu987,
According to your description that you want to conditional add the hyperlink according to different values in the fields, the link is to another report, right?
I have tested on my local environment and we have two method to do this: one method is to choose ”Go to report” and add expression to conditional add the link which will link to the subreport for the special values, another method is to create
an placeholder and add the HTML tag to conditional hyperlink to the URL of the Subreport in the Report Server.
Details information for your reference:
Method one: "Go to Report":
Right click the fields which will add the hyperlink and select the “Textbox Properties”, click the “Font” to add expression conditional add an underline for ”Text1” which have the hyperlink function and change its color to blue. (expression add to
"Effect" and "color"):
Effect:
=IIF(Fields!YourHyperlinkFields.Value="Text1","Underline","default")
Color:
=IIF(Fields!YourHyperlinkFields.Value="Text1","Blue","Black")
Click "Action" to select the "Go to Report" and using this expression in the "Select a report from the list" (If the value is "Text1" then link to Subreport or it will just refresh on the main report):
=IIF(Fields!YourHyperlinkFields.Value="Text1","SubreportName","mainReportName")
If have parameter delivery between main report and the subreport, add expression to omit this parameter for the fields which value is not "Text1":
=IIF(Fields!YourHyperlinkFields.Value="Text1",false,true)
Method two: Create Placeholder and using the HTML tags to conditional add the hyperlink which will link to the subreport URL in the Report Manager.
Double click the fields which will add the hyperlink and select the "Create Placeholder".
In the Placeholder properties window, add this expression in the Value to add hyperlink only to the "Text1" and check the "HTML- interpret HTML tags as style under the "Markup type" section:
=IIF(Fields!YourHyperlinkFields.Value="Text1", "<a href=""Subreport Link in the Report Manager"">" & Fields!YourHyperlinkFields & "</a>" ,Fields!YourHyperlinkFields.Value)
You can also add parameter in the URL if you have parameter delivery between main report and the subreport. Finally preview will have the report like below:
If you still have any problem, please provide us more details information.
Any problem, please feel free to ask!
Regards
Vicky Liu

[svn:bz-4.0.0_fixes] 20651: Some MBean tests needed flex.management. jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS 4 .0.0_fixes.

Revision: 20651
Revision: 20651
Author:   [email protected]
Date:     2011-03-07 12:21:11 -0800 (Mon, 07 Mar 2011)
Log Message:
Some MBean tests needed flex.management.jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS 4.0.0_fixes.
Modified Paths:
    blazeds/branches/4.0.0_fixes/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.validat ors.xml

Thank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM

[svn:bz-trunk] 20650: Some MBean tests needed flex.management. jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS trunk .

Revision: 20650
Revision: 20650
Author:   [email protected]
Date:     2011-03-07 12:20:03 -0800 (Mon, 07 Mar 2011)
Log Message:
Some MBean tests needed flex.management.jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS trunk.
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.validators.xml

Thank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM

Changing the development class for 0CALMONTH

Hi we upgraded from BW3.5 to 7.0 and we are getting the same error from the thread : Unable to change development class because field is greyed out
Does anyone know how this problem was resolved.
Regards,
Brian
I am changing the development class for 0CALMONTH and for some reason I am not able to change the $TMP to ZBW because it is greyed out. I also noticed the Orginal system field is SAP and not our BWD name and the Orginal language is DE and not EN.
How would I change the development class for this IO? I am perplexed how this got to this status. When I collected the 0CALMONTH afterwards and listed the IOs belong to 0CALMONTH, I was able to change the development class. Why is this being greyed out?

Changing while signed on in DE did not work. - I also tried changing the person reponsible and get the following
Local private objects cannot be repaired
Message no. TR229
Diagnosis
Every user of the SAP System can access and change local private
objects using the ABAP/4 Development Workbench.
System Response
Setting the repair flag is rejected.

When logging in to Icloud I get the message 'Apple ID' is valid but is not an Icloud Account. I have changed passord but still get the same message.

I have just set up Icloud and backed up files to it. I have not been able to log in. I get the message 'Apple ID is valid but is not an Icloud account. I have the same User ID for Icloud and Apple but different passwords. Neither combinations work. I have reset passwords twice but get the same result.

You cannot set up an iCloud account on Windows - is that where you tried to do it? The error message you quote is what happens when, having an Apple ID, you attempt to use it on Windows to create an iCloud account. You can create an iCloud account on a Mac or an iOS device, then you can sign into it in the Windows Control Panel. None of this should have any effect in the iTunes Store (the forum for which is where you have posted).

HT1386 I HAVE A PROBLEM WHEN SYNC CONTACTS IN MY COMPUTER TO IPHONE 4S after update to iOS6. The message are " waiting for change to be applied".

I HAVE A PROBLEM WHEN SYNC CONTACTS IN MY COMPUTER TO IPHONE 4S after update to iOS6. The message are " waiting for change to be applied".
PLAESE advise how to solve this problem.

Hi applerinneedforhelp,
Thanks for visiting Apple Support Communities.
If iTunes is asking you to authorize the computer, and you've already done so, the troubleshooting steps in this article can help:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Regards,
Jeremy

How can I change the MESSAGE STYLE for messages?

My customer complains about the big "X", as well as he thinks it's an error instead of a just message or note.
so my question is how do i change the message style then?

You only get that when you have two or more consecutive messages. Try to avoid that is one option.
You can change the icon if you want. Create another icon, call it stop.ico and put it in the icons directory (as indicated by UI_ICON). However, if you have a STOP alert, the icon changes for that alert too.
Note: this is for Developer 6i. In 9i you cannot use ico files. Use gif files instead and put the image in the image jar file (found in OH/forms90/java directory). Since you see a big X, I believe you are using 6i.

How to change the development class for a Layoutset

Hi Experts,
I have to Change the Development Class For a Layout which is under Local object now ($tmp) ,how to do it.
after Changing to Development Class new ,while transportation any issues will come ?
Thanks in Advance,
Regards,
Hitu.

goto SE03 and change the development class, no transport issues will come...
or
execute report RSWBO052.
Add FORM in blank field under R3TR DTEL, mark field and put your sapscript name, then execute. In Tree double click over sapscript name, and change development class $TMP.
Regards,
SaiRam

How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

As soon as I posted, Ifigured this one out on my own by going into user settings and changing the default there. Then I was able to delete the default @mac account. Thanks!

In the message class M7 i NEED TO CHANGE THE MESSAGE 301 FROM E to w.

In the program LMBGBFES I want to change the mesage e301 to w301 in the enhancement point but sap is not allowing to do so.
CAN YOU GIVE A SOLUTION TO HOW TO DO IT.
with regards ,
Mahasweta Mitra

hai mahasweta,
u cant change the message from E301 to W301 as the code where the message is placed does not come under any enhancement point so that cannot be enhanced , u can do even with implicit enhancements but that does nto fall under it i mean uisng implicit enhancement options u can add some new code at start and end of the programs, u can use enahcnement poitns to enhance the code which comes under that point and it is obvious sap do not allow everythign to be modifed , so if u want to really chnage ti then u cna use access key and change it but it has implications on other programs from where this is called
regards
m.a

How to find the Message Class and ID for messages in WebIC

Dear Experts,
I get some error messages in the WebIC
I went to SAAB to activate and see details on the error messages
But, what i am missing is the the message class and the ID information
Can any one tell me if there is a work around to check and find out which message class and ID the message belongs to
Regards,
Raj

Hi Raj,
Put a break-point in method get_instance or ADD_MESSAGE of class cl_bsp_wd_message_service.
Best regards,
Caíque Escaler

Change the Message class (OB28) for validations

Similar Messages

Maybe you are looking for