Change the number of history entries on the Back Button
Firefox allows 15 history entries when holding the Back (or Previous) button. If I want to go to the #31 entry in the history, I have to press and hold Back many times to reach it.
I want to change that number for more entries like 50. Is it possible?
You cannot change how many are displayed in the back/forward drop down at a time.
You can change the number but not how many are displayed at a time in the dialog window.
Select the earliest entry you can on the back button (the lowest entry), and then invoke the Back button again, and go to the earliest entry.
I have test data you can try:
I have '''browser.sessionhistory.max_entries''' set to 70 the default is 50
To test bring up
* http://dmcritchie.mvps.org/firefox/tab_capacity/001.htm
What you see on the page are a lot of numbered links '''001 - 060'''
# start with the 001 entry in a new tab make sure you started it in a new tab
# then go successively through 002-060 in the same tab then go up into bogus numbers '''to 70'''
# Right click on the Back button, you will see that you can see 15 entries at a time
# Click on the earliest visible at the bottom of the heap
# Click again on the Back button to select the earliest again
# Repeat previous step until to see 001, all entries were accessible through the Back button, but 15 is the maximum that you will see at a time..
Similar Messages
-
How to adjust the number of blog entries on the archive page?
Does anyone know how to adjust the number of blog entries on the archive page?
As it stands now the blog archive page lists the archives past the 4000px page length in what appears to be a long endless list.
Thanks in advance for any help!Thanks Wyodor but that just adjusts the entries on the blog page....not the blog archive page.
On the blog archive page it's just a long endless list of entries. It appears that you simply cannot adjust this on the archive page. Additionally if the blog entries exceed 50 I have to start deleting older entries.
Overall iWeb has served my needs well but this issue *****. They could probably fix it with a software update if they wanted to. -
How to get the number of page which exists the change bar ?
In FDK development, I want to find the number of page which exists the change bar.
zhaopeng,
You can get the page number by querying the FP_PageNum property of the FO_Page object:
pageNum = F_ApiGetInt(docId, pageId, FP_PageNum);
...or you can use FP_PageNumString if you are using string page numbers.
If you do not have the ID of the FO_Page object, you can get it from the paragraph ID using the following function, courtesy of Rick Quatro, posted to the Yahoo Framedev list. Send the paragraph (FO_Pgf) ID as oObj and it will return the page ID:
F_ObjHandleT GetPage(F_ObjHandleT oDoc, F_ObjHandleT oObj)
F_ObjHandleT oFrame = 0;
IntT iObjType;
F_ObjHandleT oRow, oCell;
while(oObj)
oFrame = oObj;
iObjType = F_ApiGetObjectType(oDoc, oObj);
switch(iObjType){
case FO_SubCol:
oObj = F_ApiGetId(oDoc, oObj, FP_ParentTextFrame);
break;
case FO_Tbl:
oRow = F_ApiGetId(oDoc, oObj, FP_FirstRowInTbl);
oCell = F_ApiGetId(oDoc, oRow, FP_FirstCellInRow);
oObj = oCell;
break;
case FO_Row:
oCell = F_ApiGetId(oDoc, oObj, FP_FirstCellInRow);
oObj = oCell;
break;
case FO_Cell:
// handle FO_Pgf case
case FO_Pgf:
// handle FO_AFrame case
case FO_AFrame:
oObj = F_ApiGetId(oDoc, oObj, FP_InTextFrame);
break;
// handle graphic object cases
case FO_TextLine:
case FO_TextFrame:
case FO_UnanchoredFrame:
case FO_Arc:
case FO_Ellipse:
case FO_Group:
case FO_Inset:
case FO_Line:
case FO_Math:
case FO_Polygon:
case FO_Polyline:
case FO_Rectangle:
case FO_RoundRect:
oObj = F_ApiGetId(oDoc, oObj, FP_FrameParent);
break;
default:
// prevents loop if unknown object type is found.
oObj = 0;
break;
if(oFrame){
// Use FP_PageFramePage to get the page identifier of the object.
return (F_ApiGetId(oDoc, oFrame, FP_PageFramePage));
else
return(0);
Russ -
Why is the number "1" when setting up the dial fat thickness did not change the font? Is it possible to adjust the font in the thick klavioture typing?
paulcb wrote:
Using the Bold Text Accessibility option does make the keypad numbers a little bolder.
Yep - I was only looking at Text Size.
But still, not sure what the deal is. The "1" is just as readable as any other number on the keyboard regardless. -
This problem started February 2015. I have noticed it mostly while searching ebay. When I hit the back button it did not work. I right clicked the back button and found at least 2 and sometimes up to a dozen duplicate history entries for the current page I am on, meaning I would have to click the back button a dozen times to get to the previous page. I am using Firefox 35.0.1 on a Vista computer. I have not found any fix for the problem after searching the internet for hours. I have seen similar issues with people using IE and some say the duplicate entries are caused by banner ads but still no one has provided a good answer or fix for the problem. Please help.
I will leave further answers to users of ebay. Script or adblockers may ease the problem.
* Try this add-on search [https://addons.mozilla.org/en-US/firefox/search/?q=blocker&platform=windows&appver=35.0&sort=users blocker] (Windows) -
Maximum Number of Blog Entries on the Main Blog Page
I would like to increase the number of Blog entries on my Main Blog page beyond the limit of 50 allowed through the Inspector Panel in iWeb 09. Does anyone know a work-around to this limitation?
Thanks, -JASTry creating a new blog page that looks identical to the current blog you have. Then once you start a new blog on the new blog template you just created, simply make a button or text link to your other blog. If I'm not mistaken you can create as many blog templates as you wish.
Please let me know if I'm wrong. -
How do I count the number of records returned in the CMIS query
How do I count the number of records returned in the query CMIS?
SELECT COUNT(*) FROM ora:t:IDC:GlobalProfile WHERE ora:p:xRegionDefinition = \'RD_PROJETOS_EXCLUSIVOS\''}
Euler HomeroHi Euler,
interestingly enough, the reference guide for CMIS ( http://wiki.alfresco.com/wiki/CMIS_Query_Language ) that I found does not mention the COUNT function at all. On the other hand it states that: "The SELECT clause identifies which virtual columns to return in the result set. It can be either a comma-separated list of one or more queryNames of properties that are defined by queryable object types or * for all virtual columns."
There are, however, some other posts like e.g. http://alfrescoshare.wordpress.com/2010/01/20/count-the-total-number-of-documents-in-alfresco-using-sql/ which state that they could make it working.
Having asked in the WebCenter Portal forum, I assume that your content repository is WebCenter Content. The CMIS doc for the Content is available here: http://docs.oracle.com/cd/E23943_01/doc.1111/e15813.pdf (no COUNT there either). It does, however, mention explicitly that "CMIS queries return a Result Set where each Entry object will contain only the properties that were specified in the query.". This means your could rather investigate the Result Set. Note that there are also other means than CMIS how to get the requested result set (e.g. calling a search service directly via so-called RIDC).
In the given context I am also interested what your use case is. OOTB CMIS in WebCenter Portal is used, for instance, in Content Presenter, where it is content rather than "parameters" what's displayed. -
How can I reduce the number of event cases in the main VI?
I would like to reduce the number of event case of the event structure in my main VI. E.g. I would like to have pop up window with a table when the user double click a table row. Nothing more simple than this: add a case to the event structure trigger by double clicking the table, read the table row ... But in my main VI I would have lots of them and the event structure gets crowded with minor tasks. One solution is using XControls. But is there any other recomended way to handle selected events separatly from the event structure in the main VI?
to clarify: I don't want to distribute the whole event structure. (In this case the code would not be maintainable) But I would like to handle certain context specific events in a differnt place. If I have them all in the main VI the drop down list of the events in the event structure exceeds the windows size and the program becomes difficult to maintain because one looses the overview."Strictly forbidden" is not true. But highly not recommended. The reason is simple:
1. Code can react unpredictable. Dennis already stated some things about that in your linked thread.
2. Code is not readable and therefore not maintainable. Each event source should have only one event structure for its events. Since the UI is a single source, events from there should be captured in a single event structure. It is recommended to use this event structure as producer in a producer/consumer design pattern in order not to block the events.
3. You will most propably need timeouts in your event structure which completly negates the advantage of event driven programming. Either use event driven programming or stay at polling. Do not mix (most of all because of maintenance).
Regarding your "advantages" you listed:
- Clustering reduces readability in therefore should never be done. Additionally, it requires timeout cases in most places which is not recommended.
- If you have such many events and interactions in your "sequence", it is a clear indication that you chose the wrong architecture for your application.
Please see attached example. Since i am not used to program with more than one event structure (except if i have different dedicated event sources), the example is "constructed" and therefore may lack of "realism". Nevertheless, it shows some issues which might occur:
- Blocking calls within the events lead to the fact that the UI is not responsive for the event time (FuncA). Nevertheless, interaction is still enqueued and if the blocking call is over, all those interaction are executed. In the example, please press FuncA and then press FuncC immediatly. You will see that nothing happens and after the 5s blocking call, the FuncC dialog appears. You also can switch tabs, but the visual display will update only after the 5s blocking call.
- In order to keep the UI responsive, FuncB is configured not to block the UI. But this is no solution: Press FuncB (on page 2) and the change to page 1 and press FuncA. Additionally, press FuncC. What happens? Just to mess things up, press Stop as well......do this combination several times. It is possible that only the lower loop is finished and the VI is still running even if Stop has been pressed.
Please note everyone that the attached example shoudl strictly be seen as "NEVER DO IT LIKE THIS". This is a negative example and shows the approach which is not recommended by any means!
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.
Attachments:
Never EVER86.vi 10 KB -
The number of display columns in the report reached the limit. Help!!!
Hello Everyone,
This might be dumb question. But why do get this error with a IR report? and what is the solution for this. Please help me with this.
Error
The number of display columns in the report reached the limit. Please click Select Columns under Actions menu to minimize the report display column list.
Oh.. And also i have a blob column.. if the format is not given, then the table is fine.. but happen to get this error only when the blob download format is given.
Thanks and regards
John
Edited by: JB on Mar 30, 2012 11:08 AMHi,
i have set up a small test case on apex.oracle.com and I receive the same error if I use download format.
I have a table
test_blob (id number, name varchar2(10), blobcont blob)
If I create IR like
select
id,
name,
blobcont
from test_bloband then I define download format I hit the error.
If you want this to work you have to change your query to
select
id,
name,
dbms_lob.getlength(blobcont) blobcont
from test_blobAnd then again define download format for blob on blobcont column.
Regards,
Aljaz -
The number of display columns in the report reached the limit" Interactive Report
I get the error message of "The number of display columns in the report reached the limit" when trying to display less than 100 (100 is limit) columns when an aggregate has been created. This does not happen when an aggregate has not been added to the IR report. It seems to happen because I have a control break on as well. When I turn off the control break it works but is not the result that we want. Interesting enough, if I filter the results down to 500 rows it works just fine. Does oracle treat aggregates as columns!? This is a really odd issue that I really need to clear up.
Oracle 11g
apex 4.1.0.33
Thanks in advance,
Shawn.Hi,
i have set up a small test case on apex.oracle.com and I receive the same error if I use download format.
I have a table
test_blob (id number, name varchar2(10), blobcont blob)
If I create IR like
select
id,
name,
blobcont
from test_bloband then I define download format I hit the error.
If you want this to work you have to change your query to
select
id,
name,
dbms_lob.getlength(blobcont) blobcont
from test_blobAnd then again define download format for blob on blobcont column.
Regards,
Aljaz -
Unable to determine the number of SMSs generated by the message
In JES5, I tested the SMS logging with two options; standard and xml.
In both cases, I was unable to determine the number of SMSs generated by the message.
However, such information can be found in the debug log;
If i enable the debug logging, the desired information is available:
10:15:41.59: 2-fragment(2250): The message will be sent as 4 SMS messages
Nevertheless, Debug logging cannot be enabled all the time since it is pretty verbose.
It was said that XML based logging released in JES5 will include the number of messages in the mail.log_current.
But i dont find such information in it.
Would anyone please tell me if this is applicable?
what parameters should be changed or modified in order to make such
information appear in the mail.log file?
Thanks!I've not examined the doc, but I suspect that at least one of the option logging settings will do that for you. Please do have a look at the "channel option files" and the logging levels.
-
Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?
Thanks Kelly,
The answers would be the following:
1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
The cells will be numeric, free text, drop downs, and some calculated numeric.
Are we reaching the limits for UI performance?
Thanks -
F110- not able to clear the debit and credit entry with the same reference
Hi,
I am not able to clear the debit and credit entry with the same reference in F110 even after having the payment terms as immediate payment, payment method is maintained in document no and vendor master data. Both debit and credit entry is appearing in FBL1N as an open item but it is not appearing in F110.
In Log message appear as 8 days grace period is existing whereas as payment term is just 0001- immediate payment.
Kindly advice me what could be wrong.
Thanks,
Manya.Hi,
Credit and debit balance in vendor account are not cleared automatically when only vendor line item has payment method and credit memo has not payment method. Also when there is not payment method maintained in vendor master data.
In such case to avoid payment to vendor when vendor has debit balance we perform debit balance check.
In second scenario when u2018individual paymentu2019 is selected in vendor master data vendor invoice and credit memo are not cleared automatically in F110.
To setoff vendor credit and debit balance in F110 you to uncheck u2018individual paymentu2019 check in vendor master data > company code data > payment data.
Thanks!
Raju -
Report showing the number of active users in the system
All,
There is a standard SAP report which shows the number of active users in the system (output same as AL08).
Does anyone remember this?
Cheers,
BidwanHello Bidwan,
Are you talking about the report RSUSR000?
Regards.
Ruchit. -
How do I reduce the number of audio channels in the source or export settings?
I'. trying to export my finished edit through the "movie" setting but keep getting the message that the number of audio channels to create in the exported file must be equal to, or less than the number of channels in the source. Reduce the number of audio channels in the source. Reduce the number of audio channels in the export settings. I am at a loss as to what this means and how I proceed with it prior to putting it to DVD. Please advise.
JWooleyWhat is your source, sequence settings and export setting. Which version of PP?
Prefebly a screendump of the export settings box.
(e.g. trying to export a mono track to 5.1)
Maybe you are looking for
-
MS Office 2013 crashes no matter what I've tried. Been going on for a year HELP!!!
I have been having an issue with Excel 2013 crashing for over a year now, I place post after post after post, I have spoken to numerous times, escalated 6 times and finally spoke to a person who wants money to fix THEIR ISSUE!!!!! What a way to tre
-
Just upgraded to 7.7 and now itunes won't run at all. ( it all worked perfectly until I upgraded!) I don't get any error messages just the spinning beach ball. Force quit tells me its not responding and my whole system starts playing up. ( mouse runs
-
Plugging in an external hard drive to the time capsule
Hi, I am a little confused by the discussion I have found on this topic. I am a recent PC to Mac person. I have a new MacBook Pro, a Time Capsule I recently bought and an iOmega external hard drive (houses ALL of my music). Is it possible to plug my
-
JPA Enumerated annotation and EnumType.STRING
Hi, There have been a few posts about @Enumeration within JPA. It seems that if you need to persist values other than the ordinal value of the enumeration that there is no use in @Enumeration as a JPA annotation. Say I have a Enumeration called Fruit
-
PanelBoxes with the same height
Hello, Anyone knows how to layout two panelBoxes horizontally and make them the same height (the height of the higher of them)? regards, kp