Change the ordering unit for a group

Gurus,
I need to change the ordering unit for a particular group of materials using the mass changes in material master . The problem here is it is not showing the ord UoM in the selection field. ?

hi
pls follow this:
1.Go to MM17
2. Click on fields
3. Search for MARA-BSTME
You will get ordering unit.
GANESH....

Similar Messages

Change the order type for a sales document already created

Hi gurus,
please let me know if there is any possibility for changing the order type for sales document (sales order) already created,
thank you

Hi,
Rambabu is correct. Check the alternate sales document types which your current sales document type is having in VOV8 transaction. You can have the current sales document type replaced with the assigned alternate sales document type 1 or alternate sales document type 2 during run time in the during creation or change mode subject to the current sales order is not having any subsequent document. Re-pricing will happen accordingly and all the things of order will get redetermined.
Hope this explains.

Can we change the organisational unit for a particular position?

Hi Friends,
Can we change the org.unit for a particular position?What is the procedure?
Thank you very much..
Sai

Hi sai,
I m not getting your question, Can u pls elaborate this one.
This thread has been marked as answered, u can start a new thread for the same.
Regards,
Tomesh
Message was edited by:
Tomesh Sahu

How do I change the order of input tables in joiner?

I have 3 input tables in a JOINER, how can I change the order? for instance, the order now is: t1, t2, t3, for some reason, I want to change to t3, t2,t1.
I use outer join among tables, different table order cause OWB generated different sql statement.
Please help! Thanks.

Unfortunately you cannot... The only way is to remove one group, then create a new one instead and re-connect the group...
JP

Change of order unit on inforecord

Hi,
We have changed the order unit on the inforecord for a certain material from BOX into EA. When we press the assign source button on the requistion or ME57, two lines are appearing for this inforecord. One with the old UOM and one with the new UOM. We do not want the old UOM appearing, but we can not get rid of it. Does anyone know how to ensure that we only see one occurrence of the inforecord as possible source?
Regards,
Ed

Hi Kunal,
That's what I tried, but that does not work.
Ed

How to change the primary node for a resource group. Solaris cluster. 3.2

I have searched for hours to try to find this answer.
I want to change the primary node of a resource group.
example.
log-rg runs on node1.this.com it will list node1.this.com first when you do clrg status.
But we run it on node2.this.com
A reboot will have log-rg run on node1 after a reboot. We have to switch it by hand to run
on node2 .
I want it to know that it should always try to first run on node1, but still failover to node2 if the situation arises.
scswitch -z -g log-rg -h node2 (and all the fully qualified versions of this command)
would not work.
How tow can I change the primary node for log-rg (logZ) from node1 to node2???
thanks!

Hi.
Show current configuration for RG:
clrg show -v log-rg
For change order Nodelist you can:
clrg remove-node -n node1 log-rg
clrg add-node -n node1 log-rg
But tis command more destructive. It may be problem add-node back to this RG.
I don't know why Validation of resource log-tiv in res group log-rg on node1 failed.
Need more know about configuration, resourse type, etc.
May be it's better create for test small RG and try move and change resource.
Nodelist - say candidates for run this resources. But at this moment RG can run on any from this list.
Docs about Sun Cluster.
http://download.oracle.com/docs/cd/E19787-01/820-7360/fxjbo/index.html
Typical tasks:
http://download.oracle.com/docs/cd/E19787-01/820-7359/z40002701009474/index.html
Adding or Removing a Node to or From a Resource Group
http://download.oracle.com/docs/cd/E19787-01/820-7359/z400043a1055200/index.html

Changing the order for printing portfolio files in adobe acrobat 9 pro

Does anyone know how to change the order for printing pdf files that are part of a portfolio in adobe acrobat 9 pro? The documentation seems to say that it prints files alphabetically by filename rather than by the internal sort order. This won't work for me. Any ideas? Thanks.

Question1: No.
Question2: No.

You changed the order of the menu for "Open in a new window" or "Open in new Tab", How can I change it back? Or how can I omit any reference to tabs? I do not use them at all.

You changed the order of the menu for "Open in a new window" or "Open in new Tab", How can I change it back? Or how can I omit any reference to tabs? I do not use them at all.

You can use the Menu Editor add-on to rearrange or remove menu items - https://addons.mozilla.org/firefox/addon/menu-editor

Is there a way to change the order of the listing on Hub for Z 10?

Is there a way to move the order the listing is set for the Hub on Z 10?

I've messed around with my Hub settings for a while and I don't see any way of changing the order so I'm pretty sure it can't be done. That's just a guess but I make pretty good guesses.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Importing data for tuple changes the order from source file - please help

Hi all:
I am using MDM 7.1 with the new tuple functionality. I have to import some product texts in a specific order. Tuples is working fine, the only issue is that it changes the order of the rows when importing from Excel. Let's say I have product number
A123, Text 1
A123, Text 2
A123, Text 3
When importing in MDM I get:
A123, Text 2
A123, text 3
A123, Text 1
It is changing the order in which records are from source Excel file. Any ideas on how to force it to import in the same order as source file?
Thanks,
-Arturo Blasi.

import java.util.*;
import java.io.*;
Student Name: Qiang Wu
Student Number: 205722913
public class Check05C
     public static void main(String[] args) throws IOException
          Scanner input = new Scanner(System.in);
          PrintStream output = System.out;
          output.print("Please enter filename...");
          File MarkFile = new File(input.nextLine());
          Scanner fileinput = new Scanner(MarkFile);
          double average;
          int maxmark = 0;
          int minmark = 100;
          int sum = 0;
          for (int score = fileinput.nextInt(); fileinput.hasNextInt(); score = fileinput.nextInt())
               sum = sum + score;
               if (score >= maxmark)
                    maxmark = score;
               else if (score <= minmark)
                    minmark = score;
          average = (maxmark + minmark) / 2;
          output.println("Class Average is: " + average);
          output.println("Maximum mark is: " + maxmark);
          output.println("Minimum mark is: " + minmark);
          fileinput.close();
}: ) I still cant figure out how to modify.

I am trying to change the order of one of my audiobooks (media kind: audiobook), but the ID tags are greyed out. I can't change tags for almost all my audiobooks. Music files OK. Files are all read/write. Repaired disc perms. OS 10.9.4. ITunes11.4

I am trying to change the order of one of my audiobooks (media kind: audiobook), but the ID tags are greyed out. I can't change tags for almost all my audiobooks. Music files OK. Files are all read/write. Repaired disc perms. OS 10.9.4. ITunes 11.4 I don't have iTunes Match.

Select all the songs and then Advanced -> Convert ID3 tags.
http://docs.info.apple.com/article.html?path=iTunesWin/6.0/en/655win.html

How to change the order of groups in AdvancedDataGrid

Hello,
I have a dataset similar to the following:
Region   Sales
======   ======
North     10
North     15
South     5
East      20
West      5
West      4
West      3
I'd like to group by Region and sort the groups by the Sales subtotal for each group. I already have the data grouped correctly using GroupingCollection2. How can I sort the groups by the sales subtotal (it sorts by region name by default)? I've seen some posts that talk about creating a custom groupingObjectFunction and applying a group sort. But I'm still confused. Can someone give me some pointers on how to achieve this?
So ideally, the AdvancedDataGrid would end up looking like this with the regions sorted by sales subtotal;
Region    Sales
======    ======
North
          10
          15
subtotal 45
East
          20
subtotal 20
West
          5
          4
          3
subtotal 12
South
          5
subtotal 5

Thanks, I looked at that earlier but it doesn't contain the solution I was hoping to find.
I ended up not using GroupingCollection. I think GroupingCollection is cool, but it isn't really customizable to the extent I need.
I just ended up transforming my data into a hierarchical form that could be used directly by AdvancedDataGrid. At the top level of my hierarchy, I have the detail txn groups, subtotal groups, and grand total groups. To sort the groups, I use custom SortFields. So, for example, if I want to sort by group name, I add a SortField for the groupName attribute. Both the Detail Group and the Subtotal Group share the same group name. Then I add a SortField for a summaryRow attribute. Only the subtotal group has that attribute. This ensures that the Detail Group is always followed by the associated Subtotal Group after sorting. I store my groups in an XMLListCollection and then set the sort attribute, then call refresh().
Not ideal, but it works. If my requirements were more complex, perhaps my approach wouldn't have worked as well. But as it stands it works well and has good performance.
I was hoping that ADG could handle this kind of sorting for me, but after looking at the source code, it seems like this is not possible without implementing my own custom GroupingCollection class and possibly other supporting classes.
One key thing to note is that clicking the column header to sort within groups works fine. However, if you then attempt to sort at the group level, ADG hangs while trying to refresh itself. The trick is to assign the dataProvider.sort attribute to a temporary variable, then set it to null (this sort variable contains the ADG column sorts that the user clicked). Apply your group level sort and then reapply the dataProvider.sort attribute.

Where can I change the font settings for the name of the month in iPhoto's calendar project?

where can I change the font settings for the name of the month in iPhoto's calendar project? I just ordered two copies of a calendar I designed in iPhoto and was surprised to find that the calendar's months were printing in something like an Arial 10 pt font. On previous calendars I've printer via iPhoto and Apple, the font was much larger. I've tried every menu option in iPhoto and the Calendar Project program and can't find where this is modifyable. Which leads me to ask, what the heck happened here in the first place? I did not consciously change the default.
I do remember that I got some notice when I first tried to print the calendar about the default font having been changed, but I don't know how this could have happened, and I didn't know what impact that had on the calendar until it was delivered. I typically print about a dozen annual calendars but won't buy another until I've got a handle on this problem. For the most part, the rest of the calendar is okay.
As a P.S. is there anywhere where one can get a power user's manual, or instruction on iPhoto?
Message was edited by: KPAausFrankfort

"Maximum" and "12" usually refer to compression (influencing image quality and jpeg file size in bytes); and as Curt wrote, dpi is meaningless for display by and viewing in web browsers. (It could be a different matter if you are uploading the jpeg files for someone to download from the web to print.)
What are the sequence of steps that you and your batch processing take from Bridge?
You can use call Photoshop's Image Processor from Bridge to create the jpeg files (Tools > Photoshop > Image Processor). In the Image Processor you can set jpeg compression, pixel dimensions if desired, also convert to sRGB (good idea for web display). In my experience the image processor leaves unchanged whatever dpi is set in the source file; or, if none there as might be for a pdf, it will set the dpi value in your New Document Preset Print Resolution (from your Photoshop Units & Rulers preferences).

How do I change the order of context menu items in Private Windows?

In the context menu that appears when I right-click on a link, I prefer to have "Open Link in New Window" at the top of the menu instead of "Open Link in New Tab". I have added code to userChrome.css to make that switch:
#context-openlink {
-moz-box-ordinal-group: 1 !important;
#contentAreaContextMenu > * {
-moz-box-ordinal-group: 2;
Firefox version 20 added Private Browsing Windows. The above code still works for the non-Private windows, but doesn't affect the Private Windows, so in those I still have "Open Link in New Tab" at the top of the context menu, and "Open Link in New Private Window" as the second item. Is there a way to change the order of these menu items in Private Windows?

Clarification: In the code snippets above, the "1."s are supposed to be pound-signs; they got auto-reformatted incorrectly.

How to change the order of albums iOS 8?

I recently upgraded from an iPhone 5 to a 6 Plus. Everything is fine except for the fact that some of my music is in the wrong order. There are some groups that released multiple albums in the same year, and I would like them to be in the order of when they were released. On my 5 I was able to put them in the right order by going on a computer, changing the sorting, then update iTunes Match to have it change on my phone as well. (example; group came out with album "1" and "2" same year and it defaults to "2" first, then "1." I was able to change it on the iPhone 5 to be in the right order by changing how they are sorted from my computer but that doesn't work on the 6 Plus.) I would like to order it where it goes top to bottom, with the newest on top going down. How would I do this?
Thanks

Hi Jason,
How to change the order of tables within sheets
Make a table active by clicking in it once to select that table, then drag it by the 'bullseye' (top left, I have placed a red circle to show the bullseye):
After dragging the table down:
Table 1 is now below Table 2.
The blue line is an Alignment Guide
Two types of Guide:
1. Menu > View >Show Rulers. Drag Alignment Guides from a ruler to where you want them.
2. Menu > Numbers > Preferences > Rulers > Alignment Guides. Turn on (tick) both guides. That allows you to align objects with *each other* (as well as with the ruler guides). These guides help to align objects left, middle, right, top, bottom.
Alignment Guides do not show unless you are moving an object.
to drag/move table to another sheet in the one file
Not possible in Numbers 3. The Sheets Pane has gone. Instead, select the entire table (click once in the table to make it active, then click on the bullseye). Copy (or Cut if you are brave). Go to another Sheet and Paste.
Also can you change the size of sheet tab width on tab toolbar, so I can see more sheets at once??
No. Let's hope this will be added in future updates. However, you can drag a Sheet tab left or right to reorder them.
Another tip: each Sheet tab shows the contents of that Sheet, with some options such as Duplicate and Delete:
Regards,
Ian.

Change the ordering unit for a group

Similar Messages

Maybe you are looking for