Change the Payment Method at header level in Sales order document.

Hi Experts,
I have a doubt and a problem; I want to change the Payment Method at the header level however that is not possible never at header level is the same even either I chose other when I was creating the sales order document or I tried to change after that. The system allows changing the Payment Method but when I display the document after that the change is not done always is the same payment method. Maybe it is defined at customer or sales organization level.
At item level it is possible change the payment method with any problem.
Thank you and best regards.

Dear Alberto
Payment Terms can be changed both at header level and at item level in sale order.
thanks
G. Lakshmipathi

Similar Messages

  • How to change the payment method of a subscription...

    Hello!
    I have just purchased a subscription in skype via credit card. Now I seek for a way to change the payment method from credit card to bank transfer.
    My problem here is, that when I go to the subscriptions page, I get the option to ''change payment method'', after which I get redirected to the payments page where I just can ''add a payment method''. This gives me the option to add a new credit card, which kind of fails the sense of changing the payment method at least for me.
    Am I overlooking something or can it really be possible that I am stuck with paying by credit card until I cancel my subscription?
    As a side info, I'm located in Finland, therefore I do only have access to Finnish banks (in case that makes any difference).
    I hope someone can help me solve this problem.
    Thanks in advance,
    Fahlyn
    Solved!
    Go to Solution.

    martinimartini wrote:
    I have the same problem. I used Pay Pal payment before but Pay Pal limited my account so I can only use Pay Pal until after 180 days according to their specific regulations. I also do not have any credit card. How am I supposed to pay for my Skype that I have been using since start of Skype. I really need outgoing calls.  Martin
    Hi,
    As I understand you have a restriction on your PayPal account, unfortunately this is something Skype can't help you with.
    But you can try alternative payment methods: www.skype.com/intl/en-us/prices/ways-to-pay/
    Another option is to let your friend set up Skype Manager account, purchase credit there and allocate it to you: https://support.skype.com/en-us/faq/FA10519/What-is-Skype-Manager-and-how-does-it-work
    Andre
    If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

  • F110 Configaration - Manually change the payment method.

    Hi Experts ,
    Below is my requirement
    In Txn FBZP.
    1. Use 'Payment method in country' to create a new payment method 'P' as copy of
        payment method 'C'.
    2. Use 'Payment method in company code' to add method 'P' to 3010 ( Company
         code). The only difference between 'C' and 'P'  should  be the SAPScript check
         form.
    3. Create a proposal with payment method 'C'.  in Txn F110, Manually change the
        payment method to 'P'.
    Here my question is how to change the payment method from "C" to "P" manually.
    Thnx & Regds ,
    Rajasekhar.P

    Hi
    Run the Proposal...after that go to the Edit proposal and using the reallocate button and change payment method manually..
    VVR

  • How can I change the payment method to None with gift card balance.

    How can I change the payment method to None with gift card balance?
    I already have an Apple ID account with no credit card but when I try to log in download free app it says Apple ID has not been used in iTunes store please review your account and it appears the billing info and there's no none in the option..how can I solve this so that I can used my Apple ID and can download free apps?

    Hi ..
    Help here >  Why can’t I select None when I edit my payment information?HHi

  • HT3702 How can i Change the payment method?

    Hpw can i change the payment method?

    Hi ..
    Help here >  Why can’t I select None when I edit my payment information?HHi

  • Rounding at Header Level in Sales order

    Hi all SD Expert,
    Question:
    Can rounding mechanism be applied at Header level in Sales Order?
    Summary:
    The government of Malaysia have implemented the rounding mechanism to the nearest multiple of 5 cents over the counter transaction. This mechanism shall apply to the total amount of a bill.
    Example:
    - $1.01 or $1.02 will be rounded down to $1.00
    - $1.03 or $1.04 will be rounded up to $1.05
    - $1.06 or $1.07 will be rounded down to $1.05
    - $1.08 or $1.09 will be rounded up to $1.10
    refer http://www.bnm.gov.my/index.php?ch=209&pg=657&ac=567 for more info
    My Problem:
    SAP Note 1165950 suits well enough for 1 item per sales order.
    Example:
    Total Bill =  $1.38 (posted to a dedicated G/L account)
    Rounding Adjustment = +0.02 (posted to a dedicated G/L account)
    Total customer to pay = $1.40
    But, if I have 2 or more item per sales order, my rounding mechanism does not meet the requirement. Example:
    Item 1:
    Total Bill =  $1.38 (posted to a dedicated G/L account)
    Rounding Adjustment = +0.02 (posted to a dedicated G/L account)
    Total customer to pay = $1.40
    Item 2:
    Total Bill =  $1.38 (posted to a dedicated G/L account)
    Rounding Adjustment = +0.02 (posted to a dedicated G/L account)
    Total customer to pay = $1.40
    Total Item 1 + Item 2 shown in header level  = $2.80
    In Header Level, the rounding figure shows +0.04 (rounding adjustment item 1 + item 2). I dont want my sales order to round the value at item level.
    The correct calculation to suit the regulation is:
    Item 1 + Item 2: $1.38 + $1.38 = $2.76
    Rounding Adjustment at Header: -0.01
    Total customer to pay = $2.75
    can someone help me?
    TQ
    Ezwardi

    Dear Tengku
    Please try with this.
    Go to V/08, for the net value field, maintain Routine 16 in the Alt. Cal. Type. Also add Routine 17 to Netvalue.
    As you know Condition types are assigned at each item level. So rounding off is calculated at each item level. But by assigning a tick in the Group Condition while defining Rounding off Condition, you can do rounding off at invoice level. The difference is automatically adjusted at each item.
    thanks
    G. Lakshmipathi

  • How to change the characteristic value in a item of sales order by FM?

    Hi experts,
    I guess the FM BAPI_SALESORDER_CHANGE can implement my requirement. But I have made many testing program, that's all failed. I don't know which part is not correct. So could you give a very simple sample to me? Just change the characteristic value in a item of sales order, not do any change for other parts. Thanks in advanced.
    Regrads

    Hi Birendra,
    Thanks for you explain. I follow your guide to wirte abap program. But related characteristic value still not changed in SO main screen. could you give me some suggestion? Thanks a lot!
    type-pools: IBCO2,
                IBXX.
    data: l_CUOBJ type CUOBJ_VA,
          l_ibase type IBCO2_IBASE_REC,
          l_CONFIGURATION type IBCO2_INSTANCE_TAB2,
          w_CONFIGURATION type IBCO2_INSTANCE_REC2,
          l_ROOT_OBJECT type IBXX_BUSINESS_OBJECT.
    data: t_IBCO2_VALUE_TAB type IBCO2_VALUE_TAB,
          w_IBCO2_VALUE_REC type IBCO2_VALUE_REC.
    select single CUOBJ
      into l_CUOBJ
      from VBAP
      where VBELN = '0020030609'
        and POSNR = '000020'.
      CALL FUNCTION 'CUCB_GET_CONFIGURATION'
        EXPORTING
          INSTANCE                           = l_CUOBJ
        IS_BUSINESS_OBJECT                 =
        IV_MOMENT                          =
        IV_WITH_DB_INSTANCE                =
       IMPORTING
         IBASE                              = l_ibase
         CONFIGURATION                      = l_CONFIGURATION
        EO_CBASE_REF                       =
      EXCEPTIONS
        INVALID_INPUT                      = 1
        INVALID_INSTANCE                   = 2
        INSTANCE_IS_A_CLASSIFICATION       = 3
        OTHERS                             = 4
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    loop at l_CONFIGURATION into w_CONFIGURATION.
      l_ROOT_OBJECT = w_CONFIGURATION-OWNER.
    t_IBCO2_VALUE_TAB[] = w_CONFIGURATION-values[].
      read table w_CONFIGURATION-values into w_IBCO2_VALUE_REC with key ATINN = '0000000222'.
      w_IBCO2_VALUE_REC-ATWRT = 'TMP'.
      modify w_CONFIGURATION-values from w_IBCO2_VALUE_REC index sy-tabix.
      modify l_CONFIGURATION from w_CONFIGURATION index 1.
      clear: w_CONFIGURATION.
    endloop.
    CALL FUNCTION 'CUCB_SET_CONFIGURATION'
      EXPORTING
        ROOT_INSTANCE                      = l_CUOBJ
      IS_CBASE_HEADER                    =
      CHANGING
        CONFIGURATION                      = l_CONFIGURATION
    EXCEPTIONS
      INVALID_INPUT                      = 1
      INVALID_INSTANCE                   = 2
      INSTANCE_IS_A_CLASSIFICATION       = 3
      OTHERS                             = 4
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
      EXPORTING
        ROOT_INSTANCE                       = l_CUOBJ
        ROOT_OBJECT                         = l_ROOT_OBJECT
      FORCE_NEW_INSTANCE                  =
      IV_WITHOUT_COMMIT_UPDATE            = ' '
      IV_MATERIAL                         =
      IV_LOCATION                         =
      IV_TECHS                            =
    IMPORTING
      NEW_INSTANCE                        =
    TABLES
      EXP_NEW_NESTED_CUOBJS               =
    EXCEPTIONS
      INVALID_INSTANCE                    = 1
      INVALID_ROOT_INSTANCE               = 2
      NO_CHANGES                          = 3
      ALREADY_REGISTERED_FOR_UPDATE       = 4
      INSTANCE_IS_A_CLASSIFICATION        = 5
      OTHERS                              = 6
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

  • HT204053 how to change the payment method

    how to change the payment method

    Go to http://www.apple.com/emea/support/itunes/contact.html to get the store support staff to help.

  • How to change condition type data on header of a sales order

    Hi Guys,
        I have a requirement, where i want to change the value of particular condition type at header lever of sales order.
    How to do it.If i am not wrong , this can be achived by CRM ORDER MAINATAIN .But how to do it i dont know.
    So please help me for this requirement
    Regards
    PG

    Hi PG,
    Can you please let me know if you were able to do this. I have a similar requirement where in I need to change the value of a condition type.
    I am new to CRM , so it will be great if you can please explain me the steps.
    Thanks in advance.
    Regards,
    Vivek

  • Profit Center at header level in sales order

    Hi Friends,
    Is it possible to have profit center entered at header level in a sales order. If yes then where.
    Regards,
    Wasim.

    No, profit center is always assigned at item level.
    One of the reason could be, items in a sales order can have different profit centers, hence assigning at header level will impact all the items.
    Regards

  • HT5552 how i can change the payment methods of my account from visa to non ?

    i have problem with my visa, so i want to change the method of pay to non until i fix that problem. I can't change it because the potion non does not appear ? !

    clean way is to reset your ipad in the option menue.
    other way is, start itunes app on ipad. scroll down. down left is the actual login. tap it. logout, login other account.
    sync with your itunes. iam not sure if you get problems when syncing mixed 2 itunes accounts, so clean way is reset ipad

  • Payment methods do not appear in Sales order

    Dear all,
    I've a problem with payment methods on my sales order (billing tab): the value list is not activated (is empty) in my sales order type whereas with a standard sales order it works. It seems it is because the field Tax destination country is not determined automatically. The BP used is the same in both cases, so it is not a problem of master data.
    I don't know what to change in my customizing as I've compared 2 sales order types and it is the same; For information we don't use neither tax determination nor billing, only pricing.
    Many thanks for your help
    Marjolaine

    I've found the solution: It is necessary to manage ship-to party in partner procedure, this is the role that determines the tax determination country.

  • Business Area in header level of sales order

    hi Gurus
    i have one query that the szystem dont take the business area automaically(default) on header level
    whts the setting oftha
    i have already assigned the business are4 to Sales Are & Plant & division too
    and taken the rul 3 for that.................
    plz give me the solution for thi
    Suitable answers will be rewarded
    Regard
    Amol Gawai

    Hi,
    I think since plant and division both are derived from material master into the sales order, and your business area is assigned to your plant and division, then in that case it wont default from the header.
    Also if you assign it to your sales area, it will still take at item level.
    Hope this helps.
    Reward if helpful.
    Regards
    Ravi

  • Deactivation of Pricing Conditions at header level of Sales Order

    Hello there,
    We have used a routine in pricing procedure (BaseType Routine) to deactivate condition MWST in the MWST condition line in pricing procedure, transaction V/08.
    In the routine, We played with the KINAK (set to K )and KOBLI (set to space) flags of structure KOMT1 and XKOMV and delete the MWST entry in the TOBLI table and succeeded to deactivate the MWST at item level of the sales order. (MWST condition appear in the conditions tab at item level as inactive)
    We have created a sales order with only one item that has the MWST condition deactivated at item level.
    But in the conditions at header level the MWST condition does not appear. Shouldn't the MWST condition appear at header level but deactivated (with a yellow triangle next to MWST)?
    If yes is there a flag that we forgot to set?

    Hi,
    what is the table name you had mentioned
    TOBLI is it correct?
    Thanks
    mano

  • Pricing Conditions deactivation at header level of Sales Order

    Hello there,
    We have used a routine in pricing procedure (BaseType Routine) to deactivate condition MWST in the MWST condition line in pricing procedure, transaction V/08.
    In the routine, We played with the KINAK (set to K )and KOBLI (set to space) flags of structure KOMT1 and XKOMV and delete the MWST entry in the TOBLI table and succeeded to deactivate the MWST at item level of the sales order. (MWST condition appear in the conditions tab at item level as inactive)
    We have created a sales order with only one item that has the MWST condition deactivated at item level.
    But in the conditions at header level the MWST condition does not appear. Shouldn't the MWST condition appear at header level but deactivated (with a yellow triangle next to MWST)?
    If yes is there a flag that we forgot to set?

    Hi experts,
    Has anyone done the above mentioned before, please reply...

Maybe you are looking for

  • How to delete photos from iPod after making screen shot?

    Hello! I just figured-out how to take screen shots with the ipod... And was playing with it for a while! heh heh Now I have a bunch of screen shots saved to my ipod, is there a way to delete them with out connecting to iTunes? Any tips are appreciate

  • Report generation toolkit jumping between workbooks

    Hi, I am having an issue with my VI which I am wondering if anyone has a fix too or workaround. Basically during my tests I write multiple sets of data to different sheets in Excel using the Report Generation Toolkit. At the start of my code I open a

  • Create Service entry sheet based on % work completion

    Dear Experts Is it possible to enter the percentage for planned services, while creating service entry sheet.?? For example: My client requirement is like that, while creation service PO, there a planned service like 1 lot - 10,000RS. while creatiog

  • Link to an external CSS style sheet

    This question was posted in response to the following article: http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7e1ca.h tml

  • Verify Checkbox before Submitting Form

    I have a form that has a script in the submit button to verify certain fields before submitting the form. If a field is blank an error message is generated stopping them from submitting it. I have one checkbox that also needs to be verified but can't