Change the Payroll area in mid of the month.

Hi Experts,
Why is it not advisable to change the Payroll area in mid of the month.
Regards,
Tomesh

Hi Dilek,
If splits will be there definitely there will be two wagetypes but the amounts they'll have will be based on the rates of those periods.
Suppose an employee got payscale increase on 11th of  the month, then employee will be paid at the rate of first payscale for first ten days then @ of second payscale on second 20 days.
So there won't be any inconsistency.
Regards,
Tomesh

Similar Messages

  • Date and Time Will not change the Month

    In my System Preferences I can not highlight or change the month from "1" in any manner. This is consistent throughout the system for iTunes (last played), iCal, Finder, etc. a file saved today would be saved as 2008.1.18 as consistent with my layout preferences, but not the actual date. However, in the expanded view, it still will read as May 18th, 2008. Any ideas? Currently I'm in Israel and there aren't any Genius Bars around here, but if not, I'll try in August, in NY

    I can't say if Lion has the ability to fix itself, however, I've been useing it since the day it was released and a few bugs it had at first went away after a few days on their own.  As far as setting the Date & Time on AppleTV and the other WiFi issues I was having after updating to 10.7.1 (which I felt were huge, persistent, and unacceptable), everything is functioning properly now.  The only change I made was this: I made sure that I had a connected WiFi connection using the Airport Utility and Network Preferences via System Preferences and then I locked the Network Preferences to prevent further changes.  I can't say for sure if that was all that was needed, but AppleTV, WiFi, and Home Sharing are once again operating correctly and usable.

  • Calander not showing the navigator button to change the month

    Hi All
    I have used a Input field and have binded it with a value Attribute of Date type.
    At run time I am able to see the Calander picker but in that I am not able to Butten to change the Month.Also I am not able to see all the dates of the month.
    Give me your suggestion to overcome the problem
    Warm regards
    Nitin

    Hi
    it might have something to do with the browser ...try another browser...whats the one ur using now??

  • Can't change the month in the Date & Time preference pane

    I can't change the month in the Date & Time preferences pane. I deselected "Set Date and Time Automatically" but that didn's solve the problem. I would like to trash the preference (plist) for Date and Time but I can't seem to find it. What is it called?

    In the International Formats, the date format is as I have it set, (YYYY.MM.DD) But the MM is neither blue, nor accessible for change. The year can be changed (YYYY or YY), along with several options for the day, but I can't change the month to a different format unless I change the calendar from Gregorian, or if I change from the short date to med, long or full. Although, even then, iCal and Date and Time only show the month as 1, regardless of what it should be, and without any capacity for changing it.
    Thanks

  • I can't change the month!?

    I am a heavy user, I work full time and am a more than full time grad student and it's how I keep my life organized. I know that when I have a lot of to-dos, even when I display only current month, I get a few hiccups when clicking around.
    But since I updated to 10.5.2, I am having trouble changing the month. It used to be I'd skip ahead at the mini-calendar on the bottom left, and when I clicked on a date, the big calendar would change to the right month. Now, consistently, that DOES NOT happen. BUT worse- I can't use the arrow next to the "month" button at the top to go ahead. I cannot get to the month of June to put anything on it sometimes unless I reboot the computer.
    This all started immediately after 10.5.2. Anyone have this problem and found a fix? I am hesitant to mess with iCal stuff because in the past I've had to do things like restore and all the completed to-dos showed up undone again, etc. But this is annoying enough to try.

    Posted to the wrong forum- ical server not ical app.

  • Issue on Changing the Payroll Area in Mid of the Month from Biweekly to Mon

    Dear Experts,
    I have an issue on payroll area which is changing from biweekly to monthly in Mid of the Month.
    One employee was retired on 29th of March, so his payroll area was changed from biweekly to monthly on 29th. For retire we are running the payroll on 8th of every month. When we are running payroll for April he has received only 29th and 30th retire salary, by the time he is not yet retired also.
    In this case the main problem is monthly payroll time is early then biweekly. so the employee is getting retire salary then his regular pay.
    Can you guide me where we can control that monthly payroll area should not be triggered at this movement.
    Thanks
    Chandra

    Hi Dilek,
    If splits will be there definitely there will be two wagetypes but the amounts they'll have will be based on the rates of those periods.
    Suppose an employee got payscale increase on 11th of  the month, then employee will be paid at the rate of first payscale for first ten days then @ of second payscale on second 20 days.
    So there won't be any inconsistency.
    Regards,
    Tomesh

  • [JHS 10.1.2] Changing the month displayed in the calendar

    If I open the calendar popup of an already entered date field, the position in the calendar is that of the date which was entered in the field.
    In most circumstances this is desired, but is it possible to change the behaviour so the the current date is displayed (even when there was a date already filled in)?

    Marcel,
    For UIX, the calendar functionality is provided totally by UIX. So it is a JDeveloper/ADF issue that is not related to JHeadstart. Can you please log a TAR at MetaLink ( http://metalink.oracle.com/ ), or ask this question at the JDeveloper forum at http://otn.oracle.com/discussionforums/jdev.html ?
    Thanks,
    Sandra Muller
    JHeadstart Team

  • Why can't I change the month in systemclock?

    Hi,
    I recognized this bug at least four years ago, right after i bought the macbook. I was to lazy to report it and hoped it would be fixed by an update to Lion/ Mountain Lion. I have never been so wrong...
    My macbooks systemclock shows every month the same month... January.. 12 months a year
    Switching from automatically to manual settings doenst have effects...
    thanks
    Sinn

    Although it doesn't match your problem, try the steps suggested in this support article:
    Incorrect date or time displayed in various applications
    If there's no change, try this:
    Incorrect time after migrating time zone from another Mac
    Also this:
    About NVRAM and PRAM

  • How to change the Month's arrangement.

    Hello experts,
    One of the columns Im supposed to have is the calendar months. I wants these months to appear as calendar months not fiscal, however it seems the company was running on fiscal calendar so instead of beginning from January it starts from August. I have tried sort-ascending, so far it is still the same..
    I believe this might be a an easy fix, just not sure how to..
    Any idea, thanks
    Edited by: 994621 on May 22, 2013 10:36 AM

    You know what, I believe I found answer to my own question.
    thank you

  • Change of payroll accounting area in middle of Period

    Hi ,
    SAP has recommended that we should not change payroll accounting area in middle of the period .
    Now we cannot change the payroll area for the period for which it has run , assuming we have Monthly payroll area from 1 March 2011 to 31 March 2011  and payroll has not run for this period , I tried changing the payroll area on 5 March 2011 to an another weekly payroll area for which the period start date was 5 march 2011 but I am getting an error in PA30 when i try to do that saying org assignment for this employee does not exist for 1 Feb 2011 and some error saying start date after initial entry  . What does that mean ?
    And is it possible to do what I am trying .
    Rishabh

    Hello Rishabh,
    The SAP software has a restriction regarding the transfer of employees between payroll areas - this process can only be performed at the end of each payroll period, in your case on 31 March 2011. Another restriction is that a change in payroll
    area cannot be made retroactively.
    The payroll area is simply used to group the employees whose payroll is to be processed at the same time. It may therefore be possible to re-hire your employees into the old payroll area, then transfer them to your required payroll area at the end of the period (start of the new period).
    There are two restrictions regarding the payroll area:
    - A change cannot be made retroactively.
    - A change can only be made at the end of a period.
    However, you can do an organizational change in the middle of the period and the payroll area change at the end of  the period, which means you end up with two splits in infotype 0001. The payroll area is only an organizational entity, where all employees who are to be accounted in the same payroll run are assigned to.
    Again: The payroll area is only an organizational entity, where all employees who are to be accounted in the same payroll run are assigned to. I also attach the note 338256 which may be of interest to you.
    Note 1291073 was done for the countries you have mention above for legal reasons and will not be extended to other countries unless there is a legal document that shows it has to be allowed for them.
    Hope it helps,
    Kind Regards
    Christine

  • Change in existing Payroll Area and its impact on existing PA records.

    Hello,
    Can anyone let me know please how easy / difficult it would be to change the description of the existing payroll area lets say "AB" to be the one as per requirment lets say "AC" so that it will show employees as AC rather than AB in the future? Also, if this can be done, would there be any impact on existing PA records (eg, how would they get updated to show the new code & description)?
    Many Thanks,
    Rachana.

    Could you please tell the name of that custom report?
    One more question is that do the change in payroll area could create the problem while running the retro for the previous payroll area for those employees?
    Many thanks
    Rachana.
    Edited by: Rachana L on Jul 21, 2010 1:06 PM

  • How to get the monthly interest rate

    Hello!
    I have been using AppleWorks for 10 years.
    Since that time, I use a financial template named Mortgage Analyser.
    In this file, one can get the pmt if one provided the +pv, monthly interest rate and the number of periods.+
    What I get is the reverse, that is, how to get the +monthly interest rate+, if I provide the +pv, the number of periods and the pmt+?
    I think I had this in the past, but I can not find it.
    Thanks,
    Jorge Lucas (the guy from Rio Grande do Sul)

    Peter,
    I already saw that, but it does not give me what I want.
    That works only if you put a money at a savings account and DO NOT TOUCH IT for a given period.
    My need right now is to help a girl to buy a car in 36 or 48 monthly payments and calculate the real interest.
    I want to have this for any other similar buying.
    I can do it using the Mortgage Analyser template changing the MONTHLY RATE by *+try and error+* but — +since I am a High School Math Teacher+ — I would like to have the function directly.
    Another day I was looking on the Internet and it seems that there is no direct response for what I want, using AppleWorks.
    So, if I continue to use AW, I must calculate it by try and error.
    Thanks anyway!
    Jorge Lucas (the guy from Rio Grande do Sul)

  • Change payroll area in middle of the month

    Currently I had face a problem where this staff whose is reentering the company in the middle of the month. Before this he use payroll area XX, after he reenter the company in the middle of the month, the payroll area need to be change to AA. But the system did not allow this with this error: "Payroll area change possible only at the end of the payroll period". So i was force to change the payroll area only when the date was at the end of the payroll period.
    Is there any way to rectify this issue? I also being informed that there was a standard report to do this, but i could not find it,weather is it exist or not.

    Is there any way to do by force, as i had been told that it could be done by using a standard program, but he could not remember it.
    Is it payroll could not be running if half month payroll are is XX and other half is AA if possible to change the payroll area? Why?

  • Issue on payroll area which is changing from biweekly to monthly in Mid of

    Dear Experts,
    I have an issue on payroll area which is changing from biweekly to monthly in Mid of the Month.
    One employee was retired on 29th of March, so his payroll area was changed from biweekly to monthly on 29th. For retire we are running the payroll on 8th of every month. When we are running payroll for April he has received only 29th and 30th retire salary, by the time he is not yet retired also.
    In this case the main problem is monthly payroll time is early then biweekly. so the employee is getting retire salary then his regular pay.
    Can you guide me where we can control that monthly payroll area should not be triggered at this movement.
    Thanks
    Chandra

    You can do that but it is not that easy as it sounds if you have to do that over a period of say 10-20 years...lot of operational work!!
    Also say if you load the retiree action one month ahead say on 03/01/2011. And the employee is retiring on  03/29.
    Retire payroll is on 04/08
    Biweekly is on 04/15
    Now you decide to lock the employees after the 1st biweekly check of March...say which was process 14 days before 04/15 would be 04/01. The employee number is locked between 04/01 to 04/15. For 14 days you have locked these employees!!
    What happens if there is adjustment pay...you have to manually go and unlock the employee and lock him after the adjustment check.
    I will let you decide based on the comfort, SAP effort, Operational effort and system maintenance.

  • Mid month payroll area change

    Hi,
    i am at the client site and I have been asked to change the payroll area of few employees in the system but system is not allowing me to do that.
    What is the best possible solution so that i can change the payroll area so that the changes are reflected in the payroll cycle of the same month?
    Regards
    Aryan

    For this ,
    You need to log in SAP system
    Once you log in the system then give the TCODE PA30  ( Maintain HR DATA )
    Once that screen has appier then you need to give the PERNR No for whome you need to change the Payroll Area.
    Give the PERNR No.
    Give the infotype 001 ( Organizational Assignment ) and click up on the change ......
    Once you get Screen "Change Orgnazation Assigment"   you can see the field "Payr.area" give the appropriate Payr.area and save .............
    Like this you can change the Payr.area for the Personal NO

Maybe you are looking for