Change the person to pick a order in stor

Hi, i have an order orden waiting in a store to ne picked up, the person who i expect to pick is out of the city.
Can i change the person to pick my order?
How can i procede to do that? My order is abou to be cancelled....

Hi SMRM,
As long as you provided a Friends & Family pickup option at the time of checkout, then it should be possible to update the person listed -- this option cannot be added anytime after the order has been placed. I'd be glad to see what can be done to assist you, so please make sure to check your private messages when you can.
To check your PMs, simply sign into the forum and then click on the letter icon in the upper right-hand corner of the page.
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Similar Messages

All default routing value has to be changed, while changed the work center in production order

Dear friends,
our client they want to change the work center in production order.according to production version work center also they are changed.so while change the WC,all the default value has be changed as per routing what we maintained in routing.At present we have to enter the manually change the W.C as well as set up time and operation time enter manually.Any other option to do the automatically capture value from routing while change in Work center in production order.pl help me on this.
Thanks&Regards
Sabhapathy R

Hi Rahul,
Thanks for reply. I am maintained in diff value maintained routing , Ex :First routing i have work center 'X' value maintained as a setup time in 15 Min's and operation time 10 Min's
second work center 'Y' I have maintained as set up time 10 Min's and operation time 30 Min's,
Now I want to change the work center in production order as a 'Y' so whatever value maintained in routing , it has to be changed automatically (10 min's and 30 Min's), but system will not change only old value only picked (15Min's AND 10 Min's).
Now I think you get to know what the client requirement, kindly do the need full.
Regards,
Sabhapathy R

WM-production order-need change the open quantity in Transfer order

Hi,
   I created the production order (order quantity 1000). i did material staging and generated TR. .
   But i need to change the open quantity in transfer order . i need to create the partial Transfer order
    against TR..
   KINDLY SUGGEST ME
   WITH REGARDS
   Dinesh

Hi Dinesh,
TO for partial qty is possible.
When you are doing material staging with 319 mov.type, you create a transfer order for partial quantity as follows:
You first create a manual transfer order using transaction LT04.
You specify the TR number in the intial screen and navigate to the detail screen, system shows the Open TR quantity and the proposed TO quantity. By default, both these quantities are equal to the TR quantity.
However, when you create by clicing the "Create TO button" (the icon with a plus sign in the tool bar of LT04 screen), system takes you to another screen where it asks for the "Requested Qty" on the top of the screen. Here you can modify the qty as per your requirement; then you can check and confirm the storage type and storage bin for source and destination stocks & save.
It is important that you give the correct source storage type & storage bin that is having stock or otherwise system might give error message.
System will create a TO line item with the entered qty and propose the balance TR qty as the 2nd TO line item. You can skip this 2nd TO item or delete it from the TO.
Once again, if you click the Save button, system will save the TO with the partial quantity.
The balance quantity will be available in the TR as open quantity and this can be seen in the header data of transaction LB03.
Regards
Prabhu

How to change the Profit Center in Sales Order

Hi Gurus,
Previously they setted the profit center (YB999) in sales order, now i want to change the profit center and need to give the amount into this profit center 100500.
So, could you guide me how to change the profit center in sales order.
Thank you for your replies.....
Thanks & Regards,
Chandrababu.B
Edited by: Chandrababu Naidu on May 25, 2011 12:44 PM

Hi
If this SO is processed partially - i.e. transactions happened - You cant change it
You can use ABAP and change it in Debug mode, but not advisable... Better to short close the SO and open a new SO for Balance qty
br, Ajay M
Edited by: Ajay Maheshwari on May 25, 2011 5:10 PM

Change the Profit Center in Sales Order line item's Account assignment tab

Hi Gurus,
I need to change the Profit Center at Sales order Line item in Account Assignment Tab. Currently The Profit center is coming from Material Master for the Line Item's Material as default but I have to change / overwrite that.
Can any body provide me how can i achive that means
Any User exits, substitution or any thing ?
I tried MV45AFZZ but i am not able to find out the right place where I can change COBL-PRCTR.
Sony

Hi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR

How to change the status of a production order

Dear All,
May i know how to change the status of a production order.I want to de-active the status like OPGN (Operation generated).This status is updated as there was no routing assigned to that particular production order during its creation
Thanks and Regards,
Varun Siddharth

Dear,
When you create a production order, an operation created by the system is generated automatically if no routing is used for the creation. As a result the order header receives the status HOGAN; the operation created automatically also has this status.
If you delete the operation created automatically and then do not have the status HOGAN.
To avoid this maintain the Routing for the material or delete the setting of default operation from OPJG.
Regards,
R.Brahmankar

How to change the responsible in a service order

Hi.
Does anyone know how to change the responsible in a service order?
I am working on CRM7
Thanks
Rob

Hi Radek
It falls in to an endless loop, cause the 'CRM_ORDER_MAINTAIN' calls the BAdI 'ORDER_SAVE', because of that I have to find the right place to call the function 'CRM_ORDER_MAINTAIN'.
I have done an example calling the 'CRM_ORDER_MAINTAIN' out of 'ORDER_SAVE' using hard coded values and it works.
Thanks
RoB
Edited by: Roberto Quezada Olmos on May 26, 2009 3:23 PM

I cannot change the persona on my laptop! I've tried, but the new persona only stays on while I'm online. It's not being saved or something. What's going on?

About a month or so ago, I did get a nasty piece of malware called SystemCheck on this laptop, but I believe I've gotten rid of it. God knows I've scanned the laptop a million times over and it's come up clean (using both Spybot and Malwarebytes).
Prior to this malware, I had no problem changing the persona and being able to keep the new one. Now I can't. Is this SystemCheck still haunting me?
Here are the specs for my Laptop:
XP-SP3; Compaq Evo N610c; 1.00 GB of RAM
I can't find any troubleshooting guide for this issue.

Hi DawnStorm,
You should look at the article [[Preferences are not saved]]. It could be the Firefox is just unable to write to the prefs file.
Hopefully this helps!

Modify/Change the center cost in purcharse order

Hi Gurus,
For this year I have changed the cost center for G/L Account number 600000 (Old cost center: CMERC / new cost center: 1017). Now I have a purchases order that created the year before and these have the cost center old assign.
When I try doing the goods receipt for purchase order, the system produces the following error: u201CCost Center FDB/CMERC does no exist on 08.01.2010u201D
Anybody know if you can change the cost center for purchasing order last year, with cost center old, to account pending the goods receipt?
Thanks for your help.
Xevi Gràcia.

Hi,
Two options:
Change the PO before to do the PGI.
If you use MIGO to de the goods inbound, try with the BADI MB_MIGO_BADI (I suggest method LINE_MODIFY, you have GOITEM-KOSTL that you can change). So, set the hardcode (period, relation between old cost center and new cost center, and so on) with ABAP.
If you use other tcodes (eg: MB01, MB1B and so on), check these notes:
Note 1284654 - Caution with implementations of the BAdI: MB_DOCUMENT_BADI
Note 92550 - Stock inconsistency due to customer enhancement (exit, BAdI)
I hope this helps you
Regards,
Eduardo

CRM 4.0 ABAP Changing the Delivery priority of an Order

I tried changing the Delivery priority of an Order forcefully through the program which I was able to do successfully using both the function modules CRM_SHIPPING_PUT_OB and CRM_SHIPPING_MAINTAIN but when I tried changing the Delivery priority forcefully through the ORDER SAVE badi method-change before update using all the three function modules CRM_SHIPPING_PUT_OB, CRM_SHIPPING_MAINTAIN and CRM_ORDER_MAINTAIN it didn't work. I also tried to change it using the shipping BADI but it didn't work.
Please Advise !!!!

Hello Gerwin,
Maybe you have to change the start event of your action to another one that occurs outside the CRM_ORDER_SAVE.
There is another thread in the forum called "CRM BADI" where Aidan create an action that save a document.
He is facing some problems too, but it seems that it is not a recursive call problem.
Take a look at it...
Regards,
Mauricio

Changing the Event View Field Display Order on a Calendar

We'd like to change the display of a calendar event to show the Title on top and the time below. This is how it currently looks below. Is there a way to change it?
Orange County District Attorney

Hi,
According to your post, my understanding is that you wanted to change the Event View Field display order on a Calendar.
You need to insert the code below into a Content Editor Web Part.
<script type="text/javascript" src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
<script type="text/javascript">
function changeCalendarOrder() {
$(".ms-acal-sdiv").each(function () {
var arr = $(this).find('div').toArray();
var temp;
temp = arr[0];
arr[0] = arr[2];
arr[2] = temp;
$(this).html(arr);
//alert($(this).html());
_spBodyOnLoadFunctionNames.push('calendarEventLinkIntercept');
// hook into the existing SharePoint calendar load function
function calendarEventLinkIntercept() {
var OldCalendarNotify4a = SP.UI.ApplicationPages.CalendarNotify.$4b;
SP.UI.ApplicationPages.CalendarNotify.$4b = function () {
OldCalendarNotify4a();
changeCalendarOrder();
</script>
The result is as below:
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

I am trying to buy my album. I have an English ID but am operating in Switzerland in the German part. When I go to buy book the instructions are in French and price in CHF. Can anyone let me know if I can change the language to English and order in £

I am trying to buy my album. I have an English ID but am operating in Switzerland in the German part. When I go to buy book the instructions are in French and price in CHF. Can anyone let me know if I can change the language to English and order in £ and use english Id from switzerland.
All other systems set to English and i tunes

see instructions here - since they are in Frencha and german I have no idea if they will solve your ptoblem
LN

Missing the Person/Group Picker control

I am using SharePoint 2013 with InfoPath 2010. I have a SharePoint list that is set as a Data Connection in an InfoPath form (it is being used as a Document Information Panel for a Word document but that really shouldn't matter). That SharePoint list
includes three different People Picker custom Site Columns.
BUT when I try to add those People Picker columns to my InfoPath form the "Person/Group Picker" option is nowhere to be found. Instead, I only get the options to add the field as a Section or Section with Controls. It doesn't appear
in the Ribbon either.
If I open InfoPath directly and create a new form using the same SharePoint List, the three People Picker fields appear as Person/Group fields in my form.
Can someone please tell me what is going on and how I can fix this? Thanks. Carol.

Hi Carol,
By my test, the created document information panel has no "Person/Group Picker" control, no matter I create it on document information panel settings of library content type or on infopath new document information panel template.
It is by design that we can not add Person/Group Control on Document Information Panel manually. And as far as I know, there is no workaround to get over it.
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Jez lost my i5S. Used Find my Iphone app but device is offline. It is TouchID n password protected. Wl the person who picked it up be able to find a way to unlock it?

Jez lost my i5S which is TouchID and password protected. Tried using Find My Iphone app but device is offline. Can the person who picked it up find a way to unlock it?

thx for replyg Chris. Do u mean even if the "thief" tries to send it in to an Apple store to "restore as new", it cant be done and the device is rendered useless to the "thief"?

TS1424 My app store shows different apple Id. I changed the ID in general settings under app store. Still no changes. Can't update apps now

Apps store on my iPad shows different apple ID. I changed the ID under general settings for apps store, but it didn't help. Still see different ID when entering the store. Now I can't update apps and resetting iPad doesn't help. What to do?

Use the correct login/password that the app was purchased with.

Change the person to pick a order in stor

Similar Messages

Maybe you are looking for