Change the port of SBO Mailer

Hello,
I would like to put another port (other than 25) in the SBO Mailer.
Apparently it is not possible to do so. Can a future version provides for this option?
Thanks.

As you know, current SBO Mailer only support port 25. I don't think this will be changed in foreseeable future. B1 is an ERP application. It is not an email solution, after all.
Thanks,
Gordon

Similar Messages

My ISP tells me I need to I need to change the port to send/receive e-mails, but I can't remember my Mail password to add an account. How can I proceed without the password?

My ISP tells me I need to change the port to send/receive mail, as the current port is going to be disabled for security reasons. But I can't remember my Mail password to add an account. How can I add an account when I don't remember my password? It's been several years.

your email password is with your ISP so they can help. but if it is saved in the email app you can just change the ports in the preferneces without a password.

My provider changed to pop3 port 995 incoming and port 465 outgoing. Now it no longer works. I went into the Thunderbird 28 beta and changed the ports

I have Thunderbird 28 beta. After changing the ports, I no longer receive mail and this is the error message going out:
Sending of message failed.
The message could not be sent because the connection to SMTP server mail.3dcartstores.com timed out. Try again or contact your network administrator.
Passwords have not been changed and I have to login on the web

What are the exact instructions from your email provider?
Please post your Troubleshooting Information.
AppMenu button - Help - Troubleshooting Information

I am trying to set up my outlook 2007 account on i pad and the process sticks on verifying. It would appear to be a problem with outgoing server and I have changed the port number but with no success.

I have just purchased an i pad 2 and am having trouble with the e-mail set up. Set up with wi-fi, i-cloud etc has worked fine but the i pad is recognising my outlook 2007 account details but is not verifying it. The trouble appears to be with the outgoing server and I have tried changing the port number, but to no avail! Also reset the account settings for holding messages on the server...help! As you can tell I'm not very techy and I'm desperate to get the bloody thing working as I'm going away on Tuesday! Any suggestions?

I had a similar issue and it was password case sensitive issue

Why does the port settings on my iPad change every time I sync with my computer. After syncing I have to go in and change the port settings so I can send and receive emails on my iPad.

Every time iSync my iPad 2 with my computer it changes the port settings. Has anyone else had this issue?

When you sync the iPad, do you have mail settings configured to sync to the iPad? You could have different settings on your computer that might be affecting the email set up on the iPad when you sync.

Change IMAP Port in Blackberry mail config

I hope someone can help me. I'm configuring the email account from my University in my Blackberry Torch 9800. The common port for the IMAP protocol is always 995, unfortunatelly the port used un my university is 993. How can i Change the IMAP port configuration to access in my blackberry? The configuration assistant from the mail, does not give the option to configure de port and it gives an unnexcpected error, sinces it tries to get acces by 995 port.
Best regards

Hey jduguet,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
If the email is integrating under 995, that means it is integrating as POP3 SSL. You are unable to change the port numbers in the BlackBerry Internet Service.
Also IMAP SSL is port 993.
Are you not receiving email when it is added via port 995?
I look forward to your reply.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

How do I change the iTunes receipt e-mail address?

How do I change the iTunes receipt e-mail address? I keep getting receipts at my old e-mail address but want to change it to a new e-mail address. I changed the login name to my new e-mail address but I guess that only changes the login name, not the actual e-mail address in Apple's database.

I got some help from iTunes support, and it seems to work.
If you have a .Mac iTunes account, and you want to change the email address:
First, change your primary email address at myinfo.apple.com.
Then:
"Due to an issue with the store, you must follow the instructions below to change your email address of record:
1. Verify that you have an active network connection and open iTunes.
2. Click Music Store from the Source list.
3. Click on the Account button in the upper right corner. The Account field will either display your iTunes Music Store Account ID or Sign In.
4. Enter the account name and password of the iTunes Music Store account.
5. Click View Account
6. On the Account Information page click Edit Credit Card
7. Re-enter your billing address information, adding a space at the end of your address. This will force the account to refresh and apply your new email address.
Please rest assured that we are aware of the issue and are working to resolve it as soon as possible."

How do i change the font color in mail message

I am trying to change the Font colour in Mail message to Blue as a permanent preference in Mail - Preferences. The system does not accept the settings and goes back to black. Is there a way to change the same.

The color of the font is determined by the recipient's email client. So you could change it, but it would depend on the recipient's settings.
And besides, blue is harder to read.

How to change the port in the URL of a BSP Iview

Hello,
we have several appraisal templates released in our R/3 system and we can access them by the portal.
We are changing our systems and we are implementing a load balanced in order to improve the connections with the portal. So we need to know how can we change the port of the server that appears in the URL when we go to MSS ->teamviewer and select one appraisal to see the information of the template.
We need to change it and indicate the port of the load balanced http://emsapl404pre.endesa.es:8000/sap/bc/bsp/sap/hap_document...) not the port of one of the WAS server as we have now http://emsapl404pre.endesa.es:8302/sap/bc/bsp/sap/hap_document...)
Thanks in advanced.
Best regards.
Seshen

Hi,
Just view any BSP Application in SE80 and the click on Utilities(M)->Settings.
This will fgive you option to change URL and port number of the URL..
It will be under the Business server Pages tab in the settings window.
Hope this helps.
<b><i>Do reward each useful answer..!</i></b>
Thanks,
Tatvagna.

Can't change the port

A while ago, while in a library and trying to iChat/text with my wife and getting errors I attempted changing the port to 443 to solve the issue. It helped and I was able to chat.
Now I'm having problems Vchatting and thought I'd change the port back to 5190. But I can't. When I open preferences and go to server settings and click on the port settings it's like clicking on a frozen window, nothing happens.
I realize changing the ports may or may not solve my problem, but why on earth can I no longer change the port settings?
Thanks

Hi Daniel,
You first have to log out of your AIM account.
(you can log out by selecting iChat's pull down menu and select "log out of AIM)
Then you will be able to change the port.
JP

Is it possible to change the port number of an already installed ITS?

Hello,
I've done an install of the latest ITS stand-alone application (win2k server , IIS). It was installed on port 81.
Is there an easy way to change the port number of this ITS installation without doing a new install? I know there are port references in the itsregistrywgate.xml file but was not sure if these were maintained during install or by reading the global.srvc file entries.
I've taken the simplistic steps of changing the port number in IIS and the global.srvc file but that does not work. I get a 403.2 read access forbidden error.
Any advice would be much appreciated.
Thanks,
Graham

Hello Graham,
yes, it is possible but depends on what you want.
For IIS, WGate is depending on the following items:
ISAPI wgate (the filter API that triggers on /scripts/wgate) which is normally a general isapi for all webserver instances.
the virtual directory "SAP-WGate-Scripts" which exists for the according "virtual" webserver instance.
the (web)servername in wgate registry, which points to your virtual webserver
the "Port" in the URL section in wgate registry.
So, if you want to change the port (e.g. from 81 to 82) for both your virtual webserver and the wgate then go ahead.
But if you want an extra virtual host (e.g. on 82) then:
create the virtual host on 82
create a "SAP-WGate-Scripts" directory on this 82 host exactly as the one on the 81 host.
change the "Port" in the wgate URL section.
if you also have an own docroot directory you have to copy the SAP mimes from the 81 docroot to the new one.
The only thing that will be wrong afterwards is the webservername, this will have no effect on the runtime behavior but at the next patch install you will get an extra dialog to identify your webserver again.
If you wanted to go for the latter scenario then it might be less work to add a new instance by install e.g. a dual host wgate on the new virtual host or a single host install (with a dummy agate).
Afterwards you can play around with the WGate configuration to change it to your needs.
Regards,
Fekke

Changing the port number in 10g Discoverer- Middle Tier & Infrasctructural

Earlier I had insalled 10g discoverer which incudes both Middle Tier & Infrastructural Tier with default port numbers.
Now i would like to change the default port numbers to other port numbers. This is because , i am got to do another discoverer installation with default port numers.
In this case i have one question. Is it required to change all the port numbers that exist in the file "portlist.ini" of both Middle Tier & Infrastructural Tier.
What change still i need to do in Oracle 11i application front.
Thanks
Naveen

I did troubleshooting to verify the group, but this just changed the port number back to the default in the listener.ora & tnsnames.ora.
So I did all the steps again to change the port number from the default to another - via lsnrctl status, i see that the new port number is being used, I can also log in to the database via Toad using the new port number, in v$parameter i see that the local_listener is registered on the new port number....only under the Fail Safe manager, the port number (under listener parameter) has not changed....it still shows the default port number. Anyone know how to change this???

OEM Can't get to database after changing the port on the database

Hello OEM Gurus!
I had to change the port on a database(11g) from 1521 to 1526. I adjusted the listeners to include the SID (finapp1t) in the listener listening on port 1526. I removed the SID from OEM (10g btw) and rediscovered it. It successfully rediscovered.
Now I receive the following when I attempt to go into "tablespaces" or "tables" on the FINAPP1T database page:
Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: (description=(address=(host=urora2t.unioncentral.com)(protocol=tcp)(port=1521))(connect_data=(sid=finapp1t)(server=dedicated)))
I then clean started the Agent on the server but I get the same results.
OEM seems to think that that database FINAPP1T is still using port 1521. I can connect to the database on port 1526 from my Desktop so I know the listener sees this database.
How do I tell OEM to update the port ?
Thanks for you help!
Edited by: sawright on Mar 29, 2012 10:33 AM

Success
The connection test was successful.
=============
Information from Review Screen:
Name Value
Oracle home path /u01/app/oracle/product/11.2.0/dbhome_1
Monitor Username dbsnmp
Monitor Password ******
Role NORMAL
Listener Machine Name urora2t.unioncentral.com
Port 1526
Database SID finapp1t
Preferred Connect String
Edited by: sawright on Mar 29, 2012 11:24 AM

Changing the port in iChat

Long ago I captured the following from this discussion board:
Open iChat.
Go to Preferences > Accounts.
After selecting the AIM Login account in the left hand list go to Server Settings tab.
With iChat logged out of AIm change the port from 5190 to 443
Log in to AIM<<
I'm curious if this is still a problem solver? I don't believe I've had trouble camming but I've only done mac to mac. I did have two 3-way chats that never materialized because I never got the screen showing the people.
But back to the quote, What is that change for? Should we make it?

Hi Eddie,
It was first found that Zyxel modems benefitted from this change. For some reason Zyxles do not like logging on to port 5190 and Video chatting.
More recent modems and routers have added protocols to the Port Forwarding set ups. This can have porblems when Port 5190 has to log in to AIM on TCP and have the UDP protocol for File Sending and Groupd chats and Buddy List updates.
In these cases it is worth changing the port to 443 to free up 5190 for UDP only.
6:51 PM Thursday; June 8, 2006

How Can I Change the Ports for WebDAV file shares.

Title says it all. I have another piece of software using port 80 and 443, I'd like to create iOS shares using WebDAV but I can't find anywhere in the GUI to change the port numbers and I can't work out whether I need to do something involving Apache virtual hosts and if so which config files are relevant to the WebDAV server.
Someone must have done this by now, anyone know how its done???!!!!
Thanks in advance.

OK, so I worked out which files to edit and I actually managed to change the Apache/WebDAV ports on a clean 10.8 Server.
By clean I mean I installed 10.8.0, updated to 10.8.3 via the combo updater, then installed the latest version of Server app and configured the services.
Having done that I was able to make the required changes and all is working well. I then replicated the process on my live server but it throws up an error when I try to start up the WebDAV sharing.
This thread outlines the same issue:
https://discussions.apple.com/thread/4199421?start=0&tstart=0
I am getting this exact problem, in that any manual change at all to the 0000_any_443_.conf file will cause WebDAV to fail to start. This is annoying because I need to change that file. Its also annoying because the problem isnt there on my 'clean' server.
I deleted the entire /Library/Server/ folder and the Server.app and reinstalled Server.app from the App Store, recreating the /Library/Server folder from scratch. This cleared out the apache config files which I tried to re-modify, but all the file sharing settings were retained. Does anyone think it would be worth deleting all the sharepoints? Any other ideas?

Change the port of SBO Mailer

Similar Messages

Maybe you are looking for