Change the position of fields

Hi Experts,
May any body tell me how can we change the position of the field in the application .e.g.In activity calendar we have priority and objective fields and we want that objective come first then priority.
Can any body please tell me the process.
Regards,
Khurram Siddique

Hi siddique,
            Let's consider
Position      Filed Name              Field Type
10       FUNCTION     INPF Inputfield
20       DEPARTMENT     INPF Inputfield
now if you want to re-align these function and department fields, then first delete those two entires in the field group, then make entires of these two fields by changing the positions
Position    Filed Name              Field Type
10     DEPARTMENT     INPF Inputfield
20     FUNCTION     INPF Inputfield
and generate the layout..
Thanks,
Anil

Similar Messages

I want to change the infotype 0002 field position(first name & lasname)

Dear Freinds,
I have requirement where i have to change the positions of the first name and last name , as pe standard we will see is
the lastname under that field we will se the first name . As per the user he wanted first name and then last name . I have read in sap help that it says the table T522N is the place. But before using i wanted to can i change or is there any method where i can do.
i have changed the name2 as middle name by going to cmod and changing the text label. Here it dint asked me any access key.
similary for chaning the position of the two fields can i do so please let me know if any body has done this.
regards
divya.

Hi Divya,
You can't change the position of the fields in standard SAP screens - PA30/20.
This would be repair and you need to get access key to change the 2000 screen of module pool MP000200.
T522N is used to change the name format in reports, etc. (Firstname Lastname or Lastname Firstname) It has nothing to do with the field positions in the screen of PA20/30.
Regards,
Dilek

Change the position of the text field in the report region

Hi,
I am having a report region in whch there are 2 buttons which are in the Region Template position #Create# and a
text field. I added a text field in the same region. I tried to change the position of the text field near the buttons. I
tried to change "label-Horizontal/vertical alignment" and "Element horizontal vertical alignment". But the postion of the
text field is not changing. Plz help,
Thanks,
TJ

Hi Andy,
Sorry to ask this questions.
1.Where exactly i need to change the HTML code(By uisng the view source?)
2.My taskname part html code when viewing the source is given below
tabindex="999"><img src="/i/e.gif" alt="Edit" class="eLink" />
</a><tr></td><td nowrap align="left">
<label for="P1_TASK_NAME" tabindex="999">
<a class="t16OptionalLabelwithHelp" href="javascript:popupFieldHelp('5853137628393530415','676839962625525')"
tabindex="999">Task Name</a></label></td>
<td colspan="1" rowspan="1" align="left" valign="top"><input type="hidden" name="p_arg_names"
value="5853137628393530415" /><input type="text" name="p_t06" size="10" maxlength="20" value=""
id="P1_TASK_NAME" /><a class="eLink" title="Edit" href="javascript:popupURL('f?
p=4000:371:676839962625525::::P371_ID,FB_FLOW_ID,FB_FLOW_PAGE_ID:5853137628393530415,107,1');"
tabindex="999"><img src="/i/e.gif" alt="Edit" class="eLink" /></a></td></table>
<table summary="" cellspacing="0" cellpadding="0" border="0" width="100%"><tr><td align="right"><table
cellpadding="0" cellspacing="0" border="0" summary="" class="t16Button">please suggest what changes i need in this code to change the alignment of the task_name text field,
Thanks,
TJ

OVS - how to change the position of the fields in the OVS search criteria

Hi,
I have an OVS search screen where 4 search criterias are there.Based on the search criteria , the values will be papulated in the OVS screen.
Now I have to change the position of the fields in the search criteria.Means if the Maximum field (one of the search criteria) is in the first position,I need to put it in the last position.I have ro change the position of the search criteria field and not the result fields.
Please suggest me how to do that.
Regards
-Sandip

Hi Sandeep,
please go through this article for customizing Value Help:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c6132f-4ea3-2b10-4d8f-e68d2e96113d]
Thanks and Regards

Facing data type error when changing the order of fields in a query

Hello Experts
I am working on E sourcing 5.1.
I have a query with some filters . I want to change the position of a particular filter.
Basically I want to move a filter of type date to the top , so that it is the 1st parameter.
I was able to do this by reorder option.
However at runtime it gives me an error saying that "error u201CORA-00932: inconsistent datatypes: expected NUMBER got date."
Later I reverted back my changes so that the date filed is at its original position and faced no issues.
Query worked fine.
Is the order of filters important when executing a query.
Please suggest how can I move the date filter to the top of the query's filter list.
Regards
Vikas

Hello Vikas,
Its not the SELECT statements that you need to change. You have to change the WHERE caluse.
In the WHERE clause, some of the conditions will have some table column equated to a '?' symbol. This symbol is a place-holder for a filter prompt. There is a one-to-one correspondence between the '?' symbols and the filter prompts created in the query(under the Filter Prompt tab). This means that the first '?' corresponds to the first filter prompt, second '?' to the second filter prompt and so on.
Keeping the above information in mind, you can attempt to make changes to your query. You can duplicate your existing query and try your hands at it.
One more point worth mentioning : It is evident that if you need to use the same filter prompt at more than once place in the query definition, you have to create more than one instance of that query prompt.(Here by another instance I mean that the two filter prompts should have same values in their fields when you define them.) But even when you create more than one instance of a filter prompt, on the UI it will appear just as a single instance.
If things have become more confusing than before (of which there is a high probability ) then please go through the online help for Queries. It has got an extensive documenation and will be surely be of some help to you.
Good luck!!
Devesh

How to change the position of label of an item to be in the rigth side?

Hi ,
I want to change the position of the label of an item (displayed as text field) to be in the rigth side of the text field of the item instead on the left side of the text field of the item?
Thanks in advance
Yoel

Hello Yoel,
>> I want to change the position of the label of an item (displayed as text field) to be in the rigth side of the text field of the item instead on the left
Are you talking about a single item among others, which will be left at the left side, or are you talking about the entire page (Right-To-Left page orientation)?
I’m afraid Leo suggestion will not help you either way. The “Horizontal / Vertical Alignment” field, in the label section of the item, pertains to the alignment within the ‘TD’ cell of the item’s label, which by default is located to the left of the item. Within this cell, you can choose several alignment options, including right and left.
Regards,
Arie.

How can we change the position of an employe in 0001

Dear Friends,
I would like to change a record (either by copy/change) for infotype 0001 in order to change the position of any employee. Through PA30 when iam trying to do a copy
i found that the position field is only non-editable mode . Could any one let me know what is the procedure if you want to change the position of the employee.
regards
syamla

Hi syamla,
To cahnge position proceed in the following way:
Go to Pa30, select personnel number for whom u want to change position, select infotype 1 and click on "overview" icon.
In the "List actions" screen u will find one or many actions. Now select one action (where u want to change position) and click on "Copy" icon. Now u will reach "copy actions screen", and postion is field is editable. Change position. U might get this entry deletes a record, press enter. Save ur entries and continue to org. assignment infotype. save org. assignment infotype also.
Hope this will help u.
Reward points if helpful
Rajesh Panda

How to Change the position of Column in ALV report

Hi Follks,
    Is is possible to change the position of column in ALV report?.If yes then how?
    Basically my requirement is, that user want afacility where , he should be able to change the position
    of column aftre he runs the report.
    Eg: After running the report , user felt that column 5 should be at position 2 , in that case he should
           be able to drag column 5 at position 2 and vice versa.
    Please help me, how to solve this issue.
    Note : I am using NW 7.0 SP 9
    Regards
    PG
Edited by: PG on Apr 13, 2009 11:10 AM

HI PG,
do below whie filling the filed catlog
wa_fieldcat-fieldname        = 'Field1".
wa_fieldcat-COL_POS = '1',
append wa_fieldcat to it_fieldcat.
wa_fieldcat-fieldname         = 'Field2".
wa_fieldcat-COL_POS = '2',
wa_fieldcat-fieldname         = 'Field3".
wa_fieldcat-COL_POS = '3',
Thanks!

Is it possible to change the position of beining of text in a standard report

Hi,
I am wondering wether it is possible to change the position of the test (the starting point) in a standard report. I would like to print a label with different texts at different positions. If its not possible in a standard report is there any other way to do it.
Thank you,
Mudda.

Hi Mudda, I don't see any way myself to set any particular starting position for your text. It looks like the best way to emulate this behavior would be to add a new line with lots of tab characters or spaces to place your new text at a specific offset from the left. You can also use Append Table to Report and wire in a 2D string array with only a few positions filled in with your various text labels as shown below. This will space text labels pretty well across the page. Try it out and see if it works for you. You could be more clever and build the 2D array programmatically if you wanted more control over position.
Message Edited by Jarrod S. on 06-02-2006 05:37 PM
Jarrod S.
National Instruments
Attachments:
Set_Report_Position.JPG ‏69 KB

How to change the position of a window created in the script?

Hello to all
A window called from another window are the same size. How can change the position of the window relative to the caller call window?

That is worked, but for abs.coord. How make releative coord.?
When I include that in my script, window show without elements ! See attachments №2

How to change the position of a rectangle dynamically

Hi,
I am designing a form, where the position of a rectangle has to be changed dynamically. I'm trying with Set_Item_Property(Position property). But I'm unable to change the position. I need some information regarding this graphics object. Normally, we attach block name with the items. Then for these graphics object, what will be attached. I'm using Forms 6i version.
Regards,
Alok Dubey

you can use a stacked canvas with the rectangle in it. Then you can change the position of the canvas at runtime. Problem is, that the canvas overlaps objects...

Why can't I change the position of the 'Top Collections' feature box?

In Public Site Manager I can select or de-select and change the position (ordering) of all the feature boxes on my provider page except for 'Top Collections'. As a result of this 'Top Collections' remains fixed at the bottom of the page. I'd like to move it to the top of the page so it's the first feature box that users see. What gives?
Options in Public Site Manager (notice there is no option to select or move 'Top Collections')
iTunes U Provider Page (notice that 'Top Collections' is at the bottom of the page)

Hi Julie
Thanks for the reply.
I can move the 'Top Downloads' box but not the 'Top Collections' box.
I don't use the What's New feature box so unfortunately I can't comment on that. In regards to the ordering in custom feature boxes I think it's no longer possible order the items. Or rather you can order the icons in Public Site Manager but in iTunes it orders them automatically by 'Most Popular', 'Name' or 'Release Date', with Most Popular being the default option. I do have my doubts, however, about the reliability of the 'Most Popular' ordering. I know for a fact that there are many collections / downloads on my iTunes U site which are way more popular than those that iTunes deems to be the most popular.
Regards
Tom

How can i used pai in screen 1000 to change the select-options field?

hi,all.
I want used pai to change the select-options field,but it can't works.
the mainly code is:
REPORT ZTEST99.
TABLES :MARA,MAKT,MARC.
SELECTION-SCREEN BEGIN OF BLOCK B0 WITH FRAME TITLE TITLE0 .
select-options:s_matnr for mara-matnr,
               s_werks for marc-werks MODIF ID ID1.
SELECTION-SCREEN END OF BLOCK B0.
parameters:p_flag as checkbox.
at selection-screen OUTPUT.
   LOOP AT SCREEN.
   IF P_FLAG = 'X' .
   IF screen-group1 = 'ID1'.
         screen-input = '0'.
    ELSE.
      screen-input = '1'.
    ENDIF.
    MODIFY SCREEN.
ENDIF.
    ENDLOOP.
START-OF-SELECTION.
CALL SCREEN 1000.
when i click p_flag,then i want to change s_werks from OBLIGATORY to no OBLIGATORY.
how can i realized?
Thanks for all.
Sun

Hi ,
change your code like this.
Change in your code:
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECT-OPTIONS : s_matnr for mara-matnr,
s_werks for marc-werks MODIF ID ID1.
SELECTION-SCREEN END OF SCREEN 100 .
At selection-screen.
if sy-dynnr = '100'.
IF P_FLAG = 'X' .
LOOP AT SCREEN.
IF screen-group1 = 'ID1'.
screen-required = '0'.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
else.
LOOP AT SCREEN.
IF screen-group1 = 'ID1'.
screen-required = 1.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
my code :
REPORT Z50871_SELECTOPS_DYNAMIC.
PARAMETERS : CH_EBELN AS CHECKBOX,
             CH_VBELN AS CHECKBOX.
DATA: V_EBELN TYPE EKKO-EBELN,
      V_VBELN TYPE VBAK-VBELN.
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECT-OPTIONS : EBELN FOR V_EBELN MODIF ID G1,
                 VBELN FOR V_VBELN MODIF ID G2.
SELECTION-SCREEN END OF SCREEN 100 .
AT SELECTION-SCREEN OUTPUT.
IF SY-DYNNR = 100.
    IF CH_EBELN = 'X' AND
       CH_VBELN = ''.
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 EQ 'G1'.
          SCREEN-ACTIVE = '1'.
        ELSE.
          SCREEN-ACTIVE = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ELSEIF CH_VBELN = 'X' AND
       CH_EBELN = '' .
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 EQ 'G2'.
          SCREEN-ACTIVE = '1'.
        ELSE.
          SCREEN-ACTIVE = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ELSEIF CH_EBELN = 'X' AND CH_VBELN = 'X'.
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 EQ 'G1'
           OR SCREEN-GROUP1 EQ 'G2' .
          SCREEN-ACTIVE = '1'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ENDIF.
ENDIF.
AT SELECTION-SCREEN.
IF SY-DYNNR = 1000.
IF CH_EBELN = 'X' OR CH_VBELN = 'X'.
    CALL SELECTION-SCREEN 100.
ELSE.
    MESSAGE I000(Z50871MSG) WITH 'Please select atleast one checkbox'.
ENDIF.
ENDIF.
regards
Sandeep Reddy

Can I change the position of the 'x' to close tabs?

I know it's not in preferences, but hoping there might be some sort of default I can set via command line?
I'm using Safari 6 on Mountain Lion. All the other browsers have the close control on the right.

At present there is no way to change the position of "X" in the tabs.
To the best of my knowledge there is no "defaults write" command to enter in terminal.
Best.

Can I change the position of the Get Info window?

Can I change the position of the Get Info window?

If you want to open the "Get Info" panel in the center of your screen, define the following Automator service and install it in the "Services" Folder of your User Library. This service will be available when you ctrl-click a file or folder in the pop-up menu and it will open the "Get Info" in the center of the screen.
Open Automator and select New -> Service.
Select: Service receives "files or Folders" in "Finder.app"
Drag a "Run Apple script" action from the Actions pane -> Utilities onto the Workflow
Paste the following script into the action, after (* Your script goes here *) and before "return input"
          tell application "Finder"
activate
                    set {d1, d2, d3, d4} to (get bounds of window of desktop)
open information window of item input
                    set {i1, i2, i3, i4} to (get bounds of information window 1)
                    set position of information window 1 to {d1 + (d3 - i3 + i1) / 2, d2 + (d4 - i4 + i2) / 2}
          end tell
Save the service and name it e.g. "centeredGetInfo". It will be installed in your library -> Services.
Now you can ctrl-click any File or Folder, and in the Services Section of the pop-up menu you will see your new service "centeredGetInfo", also in File ->Services in the Finder, when you select a Finder item.
You can bind this service to a keyboard shortcut in the keyboard preferences and use it like the standard "Get Info"

Change the position of fields

Similar Messages

Maybe you are looking for