Change the Proficiencies in Appraisal Model, PD???

Dear All,
I am trying to change the Proficiencies in Appraisal Model from the following, as per standard;
1 = 100%
2 = 90%+
3 = 80%+
4 = 70%+
5 = 60%+
6 = 50%+
To the following, as per the requirements of the client;
1 = 50%+
2 = 60%+
3 = 70%+
4 = 80%+
5 = 90%+
6 = 100%
Is it possible to be done? If so, how do I do it?

One more thing, Is it possible to edit the weighting in the appraisal forms? like the weighting i comming up as 1, i i want to change it to 2 how can i do that?
Regards.

Similar Messages

  • Changing the status of appraisal document

    dear experts,
    I am working in ECC 6.0
    I have created an appraisal category and template and want to maintain it for evaluations and released the document
    After saving and completing the document, i want to revoke the status from "released " to "non released". I have also deleted all the appraisals thro " transaction -"appchange "
    i am not able to revoke the status from released to non released . what is the solution for this issue ?
    early reply solicited
    nataraj s

    Hi
    You will not be able to change the templates that have been released. This is a part of the standard functionality.
    To unrelease and make the changes execute the following steps
    1. Go to transaction phap_admin
    2. Delete all the open documents (in process, assigned, etc) corresponding to the appraisal template
    3. Right click the appraisal template in phap_catalog and change the status to not release
    Judith

  • How to change the JCO reference of an existing model  in CE 7.1

    Hi All
    I have read an article which explains the method to change the JCO reference of model but when I tried to follow the same steps in CE 7.1 i am not able to find the category "Model Settings" (on clicking model edit option) containing the property "modelInstance_defaultLogicalSystem" which needs to be changed.
    So is there any other method that needs to be followed in CE 7.1 to change the JCO reference? or should i delete and recreate the models with new JCO reference.
    Any suggestions would be highly helpful.
    Regards,
    Ashwin Kulkarni.

    Hi Ashwin,
    I guess you are not opening the models node. Open the models node shown in the web dynpro explorer.
    ---local Development [project1]
    ----Web Dynpro
    ----Application
    ----Model
    --Model1                                <<<<----Click Here and select properties tab
    ----Model Classes
    ----Component Interfaces
    ----Components
    ----Dictionary
    ----Resources
    Then select the model for which you want to change the JCo references and then in teh properties tab you will find the desired propoerty and then just change the modelInstance_defaultLogicalSystem Property.
    I guess this will solve your problem.
    Thanks
    Sarbjeet Singh,

  • Difference Between Appraisal Model and Appraisal Doc

    Hi Experts,
    Please do let me know the difference between Appraisal Model and Appraisal Documents (Appraisal Template).
    I mean in terms of functionality.
    when are where to use them.
    Through Appraisal model i m unable to create Appraisals for n number of employees in one shot. i.e, appraisals to be created for each individual of a department in one go.
    i know this transaction PHAP_PREPARE_PA which will create mass Appraisal Doc's but i want to create Appraisal which can be stored in Infotype 0025.
    Plz suggest.
    Thanks in Advance
    ...Sadhu
    Edited by: sadhar on Sep 8, 2008 11:09 AM
    Edited by: sadhar on Sep 8, 2008 11:09 AM

    hi
    the basic difference you are looking at is the old appraisal model
    and the new MBO
    the old appraisal model very much supports infotype 25 and you can view the data in there,
    but once you activate the MBO you cannot have the old module active practically.
    In the PHAP_prepare_pa transaction can be used for mass dipatch of appraisal documents,
    select the second option for the same in the list .
    The second option will allow you to select org unit which will  allow to assign to all employees in the selected org. Unit.
    Regards
    Sameer

  • OSA .. Assign Appraisal Models to Personnel (Sub)Areas/Employee (Sub)Groups

    Hi all,
    I am using OSA and I am trying to assign appraisal templates to certain employees. The old "Assign Appraisal Models to Personnel (Sub)Areas/Employee (Sub)Groups" does not seem to work.. could I be doing something wrong? How does this functionality work in the new module of OSA . can anyone help me out?
    Thank you

    Hi Bisu ,
    Could you so nice as to tell me how exactly can I do this?
    Thank you so much for your quick reply!

  • I want to change the end date in SAP HCM Appraisal model

    Hi all,
    The short dump gives out this message:
    Object type SUBTY cannot be read for message type HRMD_A from segment type E1PLOGI
    i want to change end date of the appraisal model multiplier, where i have to go and change the same.

    declare variable:
    DATA : gv_date(10) TYPE c.
    and assign value to it:
    CONCATENATE sy-datum+4(2) sy-datum+6(2) sy-datum(4) INTO gv_date SEPARATED BY '/'

  • How to change the JCO reference to an existing model

    Hi
    We had created a few models with the 2 - default (WD_model..) JCO references, now is it possible to change the references to a different custom /name without re-importing the models again ?
    The issue for us is very critical because, we need to maintain unique reference for all the models under each application for the same server.
    please let us know asap.
    thanks
    sathyanarayanan

    Hi Sathya & Ravi,
    If you want to change only the JCO Destinations  that your model refers to, then its very much possible to change their names.
    But if the model stucture has got changed , then you should reimport that.
    I guess, trying out the following steps for changing the names will work out for you.
    1) For Medata Dest--
    a) Click on the local disctionary stucture that has been generated by importing the model.
    b) Click on the properties tab on the bottom right corner.There you shoulb be able to change the Metadata dest name.
    2) For Application data Dest-
    a) Right Click on model classes (model_Input & model_output) &  then click EDIT.
    b) Same Way, on the bottom right corner , Change whichever proerty you want to alter inlcuding the Dest Name.
    In this way, you can mainten unique JCO references for all the models you are using in your project.
    ReBudild & Redploy the entire project . Create the New JCOs Destinations in the content Admin & happily run your application.
    Regards,
    sandip

  • Change the Appraisal Template in Mid of Year.

    Hi All,
    We want to edit the appraisal template which is being used in Production.
    System is allowing to edit the template in development as there are no documents created. Once we transport the change to production what will be the implication.
    Q1. Is it recommended to change the template after it is being used.
    Q2. If really need to edit the template in mid of appraisal process how do we go forward.
    Thanking you in advance.
    Kamal R.
    Edited by: Nalin Jain on Aug 5, 2009 7:41 AM

    Hi Suresh,
    We are on ECC 6.0 and SP 43.
    We need to put some extra fields / Notes to the targets and extra sub statuses to correctly identify the condition.
    But already appraisal process started and documents are created. Now we cannot either create the same documents in new template or postpone the appraisal template change to next year.
    In this situation we decided to change the existing template. We want to know what will be the implications if we change the template in development and transport it to production???
    Download and upload will create a new template which will not be useful for our case.
    Thanking you in advance.
    regards,
    Kamal.

  • How to find the appraisal form for an appraisal model

    Hi group,
    We want to implement the BAdI that defaults dates for an appraisal.  However, it should only kick in for certain appraisal models.  When entering the BAdI, I have APP_MODEL_ID available to me.  Based on this ID, I need to find which appraisal form the passed appraisal model belongs to - and only carry out code in BAdI if appraisal form = 5.
    I find AFORM_ID in table T77BF, but I cannot find how to determine this based on the APPL_MODEL_ID passed to the method.
    Any hints greatly appreciated.
    /Kirsten

    You can do a look up of the Table HRP1043 for the Appraisal Model & retrieve the Appraisal Form ID.
    data: w_form_id type AFORM_ID.
    select AFORM_ID into w_form_id up to 1 rows
                               from HRP1043
                               where plvar = '01'
                                   and otype = 'BS'
                                   and objid =  "Appr Model ID
                                   and istat =1
                                   and begda le sy-datum
                                   and endda ge sy-datum.
    endselect.
    if sy-subrc eq 0.
    * w_FORM_ID will ahve the form no
    else.
    * error.
    endif.
    ~Suresh

  • How to change the  short text in  a model service specification??

    Hi,
                I've tried changing a model service specification using the transaction code ML11 but couldnt change the  short text language from German to English.

    Hi
    One possibility is to Maintain the  languages in the Additional data tab  under description in the material master record for your Services . Please check wether both the languages are maintained or not . Please correct me if i am wrong .
    regards
    kp

  • How to change the model of JSpinner

    Hello, just want to ask how to change the model of a JSpinner during run time...
    I have an existing JSpinner
    example:
    SpinnerNumberModel model = new SpinnerNumberModel( 2, 2, 4094, 1);
    jSpinner = new JSpinner(model);
    if (changeLimitTo255 == true) {
    model = new SpinnerNumberModel( 2, 2, 255, 1);
    jSpinner.setModel(model);
    The problem is, the limit is always 4094, limit doesn't change to 255.
    Thanks...

    If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
    Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.

  • Changing the Final rating after the appraisal process is completed

    Hi Experts,
    Is there any way to change the final appraisal rating when the appraisal document is in the completed state?
    I tried to change the rating only VA rating using standard FM HRHAP_DOC_FINAL_WRITE, but it deletes all the other records(VC, VB).
    Can someone guide me on the same?
    Thanks & Regards,
    Vibha

    Hi
    Changes to Appraisal Template can only done when it is NOT Released, to Cancel Release there should not be any documents created by using this Appraisal Template and deleting completed appraisal documents is not Recommended in PRD enviornment.
    You cannot make changes to appraisal template when it is in Released Status and it is not recommended to make changes to appraisal template which has appraisal documents.
    You need to copy the appraisal template, create new appraisal template and make the changes to new template.
    Hope this helps
    Best Regards
    Reddy
    I think I misunderstood your question, if you want to change the attributes of final rating column, above is the answer.
    If you want to make changes to the value in Final Rating Column, you can do that by using T code PHAP_ADMIN
    Edited by: ILLITAM Papi Reddy on Mar 31, 2010 1:07 PM

  • How to change the Client n user details for a model in Production

    Hello Friends,
                         I have an application which is calling RFC function module from SAP R/3.
    In development system while creating Model I have entered the Back end details like Client, User Name and Password.
    If I transport the application into Production, The Client and user name will be different. In this case How would I change the client n user name details.
    Do I have import again in Production. But does sounds a good idea.
    ThanQ for Ur time.
    Cheers.. Sam

    When you create Model first time, to import Interface of RFC you would need to logon into R/3. But once you are done with the Interface, your connection to R/3 will be determined by the client and UID details in JCo connection.
    Now when you transport your code from DEV to QA system, the JCo connection with the same name should be there. or else, you would need to create the same in the new server. I dont see a need to reimport the model. If that is the case, then developers would have to spend huge amount of time doing this job alone.
    Hope this solves ur problem.
    Regards
    Murali.

  • Changing the default logical system names for adaptive RFC models

    Hello,
    When I create an Adaptive RFC model the dialog that asks me to specify the model name, package, source folder, etc. has default values in the "Default logical system name for model instances" and "... RFC metadata".
    I know I can type in another name there but I'd like to change the default name to something that fits our naming conventions. Can I change that? If so, can someone tell me where?
    Thanks in advance!
    David.

    Suresh,
    Thank you for your response. However, that is not what I was looking for. Sorry if my post was not clear.
    I knew that I could change it AFTER the import. I also know that I can type in something else besides the default DURING the import.
    What I am asking is if there is a way to change some configuration setting so that the 'default' that comes up in the drop down DURING the import is something different than what comes 'out-of-the-box' with NWDS.
    Hope that clears up what I'm looking for.
    David.
    Message was edited by:
            David Z. Pantich

  • Is it possible to change the title of a webpart using client object model/c#/sharepoint online

    Hi folks!
    I have been busted my butt trying to Write a program changing the title of an existing webpart on on of our subsites on SharePoint online. But I keep getting an error in the very last context.executequery. Tried a bunch of different approaches, but I can't
    make it work. Before I start posting code; I Wonder if anyone have ever done this?
    Its a plain Windows form application, using Visual studio Express and the Client Object model. (Listsing the titles of the webparts Works but changing titles seem impossible. Thought it might be a checkin/out problem but it doesn't make a difference).
    Any help would be highle appreciated.
    Lars

    It depends: are you using the default style for Text Captions? In that case you can change the default style in the Object Style Manager and have it applied to all Captions.
    Or you can change one text caption, and in its Properties panel choose the option 'Save Changes to existing style' from the menu top right (see screenshot). Both methods will work if you didn't override the default Caption Style for those captions. Beware: Quizzing objects can use another style.

Maybe you are looking for