Change the recording level for recording with Thunderbolt-Firewire-Mixer

Hey,
I just bought a PHONIC Helix Board 24 Universal for recording some music via Firewire.
Because my IMac has no Firewire-slot, I am using a Thunderbolt-Firewire-Adapter and a Firewire 400-800 cable.
If I try to record some music it sounds really horrible.
It seems that the reason is the recording level which can be changed while using the internal micro but not with firewire-Thunderbolt.
The recording level is set on max, resulting in overmodulation and noise.
Is there any way to adujust the recording level?
Thank you in advance!
Kay

Hello Jshen6,
Have you tried looking at the examples in LabVIEW under Hardware Input and Output>>Synchronization? The Analog Input-Synchronization.vi example shows you how to synchronize AI across multiple devices in various configurations and for various types of hardware. Would you mind listing what hardware you are using? Are all three devices taking the same data (voltage, strain, acceleration, etc)?
Jonathan L.
Applications Engineer
National Instruments

Similar Messages

TS1485 change the permission level for iTunes and iTunesHelper to allow full access. how do i do this

How do i change the permission level for Itunes

I have actually been using Amazon cloud for a while now and never had this problem. Actually, I think I did get locked out once and was able to get back in by contacting support and answering some questions. This option isn't available with Apple.. They lock you out for 90 days regardless of whether you can verify your ID. I know this because I contacted them recently and they verified my identity exhaustively and then said 'sorry-there's nothing we can do and you are not getting a refund for time lost.' I think I understand why the policy is there, but I think it's ridiculous that they make no exceptions even when the mistake is on their side, which I'm pretty sure it is in my case.

Can i change the volume level for just a part of a track?

i am trying to raise the volume level for just a little section of a track without raising the volume for the whole track, just a one little section. can i do that on garage band? how would it do that?

Yes you can
On the track instrument selector, there is a row of small buttons, one being an upside down triangle. Click the triangle to display Automation. The default controller is Track Volume. You will see a bright green line which is the volume level throughout the track..
Simply, go to the location where you want to reduce the volume, click on the green line to insert a control point. The first click is used the maintain the current volume. Go to the point where you want the volume to be reduce to, and click-and-hold the line and drag the new control point to the target volume.
NOTE: Use the Shift key to adjust incremental amounts.
Have fun!!

How do I change the print orientation for PDFs with mixed orientation pages?

I'm sure this is a fairly basic and easily solvable issue, but I've been searching for a solution and can't find one for the life of me.
The issue: I'm printing a PDF that will be bound book-style, and the file contains pages with mixed orientations (both portrait and landscape). When I print the file, the landscape pages point the wrong way, to the left of the spine, when they should be pointing down to the right of the spine. I've adjusted the print settings for multiple test rounds, and nothing seems to work. Here's a visualization of the problem (apologies for the bad Paint art):
What the book is doing now when it prints:
What I need it to do:
Here's the caveat: I cannot just rotate all the landscape pages counter-clockwise in Acrobat for ease of printing, because it would remove the ability to scroll through the file quickly in Reader or a Web browser, and the same file needs to be both easily readable digitally AND print correctly.
Is this adjustment a print setting? Is this a tool I'm overlooking within Acrobat? Is this outside the scope of what is adjustable? All advice is welcome, and please feel free to ask any follow-up questions if I explained my problem unclearly.

If you are trying booklet printing, try to rotate the pages as needed before you print to the booklet. If you are print booklets without using professional imposition software, then Quite Imposing or Quite Imposing Plus should be considered. I believe they offer a demo version.

Changing the Dunning level and reports for Dunning

How can I change the 'Dunning level' for line items in the 'Dunning History/Dunning overview'? I have read in help.sap that I can change it, but am not able to find where I could do that.
link: http://help.sap.com/erp2005_ehp_03/helpdata/EN/bc/2127c4265911d286d6006008bbc8e8/frameset.htm (In 3rd para).
Can anyone tell me if there are any reports available to view the 'Dunning list'(other than Dunning History in F150).
Also, Our client needs a report which shows a list of all 'customers' and 'line items' Blocked for Dunning.
Please give me your suggestions ASAP.
Thanks
Edited by: sapfan 20062007 on May 3, 2008 10:39 PM

Thanks .
I'm looking at running the ALFS editor . I'm in WebAS 7.00 . The Themes/templates and brand colours on the left frame does appear but the bsp page does not appear . used the standard bsp page which appears as a default ( bsp add it05 ) . The error message is as follows
The following error text was processed in the system:
BSP Exception: Das Objekt entrypoint.htm_sap-themeRoot=/sap/public/bc/ur/design2002/themes/alfs1000101F5FFFA2F4F4F2929296F8FAF3F5F7F in der URL /sap/bc/bsp/sap/it05/entrypoint.htm&sap-themeRoot=%2fsap%2fpublic%2fbc%2fur%2fdesign2002%2fthemes%2falfs1000101F5FFFA2F4F4F2929296F8FAF3F5F7F ist nicht gültig.
But if I run the bsp application manually then the right theme does get picked up . I made the entry in the bspthemeroot table and put in the alfs parameter in the above url ( 1000101F5FFFA2F4F4F2929296F8FAF3F5F7F ) . The bsp application works fine but not the alfs editor . Any ideas ?

Unable to Determine the Change Date and Time for records in infotype 2011

Hi Everyone,
We need to know on when the clock-in and clock-out records were interfaced to SAP in infotype 2011.
The change date/time field in infotype 2011 is blank/not populated. Hence, we're unable to determine on when the clock-in records were updated in infotype 2011.
It is not possible to get the audit logs for infotype 2011 as it is switched off.
We found this table TEVEN and just the same thing, the field "change on" is blank.
Kindly help us on how we can determine the change date and time for records in infotype 2011.

Hi Prasad,
Here's the scenario.
On June 3, it was reported that staff's clock-in record on june 1, 7:00AM is missing in infotype 2011.
However, when I checked infotype 2011, the record is there.
So, they are now asking me on when this record was updated in infotype 2011 as they are thinking that there might be some delays in sending of the data to SAP.
The created on and created at in table TEVEN shows the same, june 1, 7:00AM which seems to be not true as on june 3, it was reported to be missing.
Can you help further on this?

Why can't I adjust the recording level for a Blue mic???

Why can't I adjust the recording level for a Blue mic???

Most Blue usb mics have a gain control somewhere on them.

How to change the status of updated record?

Hi All,
how to change the status of updated record?
new record should be active version(X) and old version will be deleted.
Plz suggest..
Thanks in advance...

Steve,
In the actual question, you mentioned that the old record needs to be deleted and hence the solution provided.
Now, you are talking about field. May I know which field are you talking about??
Jst get in to ABAP Editor and try debugging the code with the solution provided and let us know if that is working fine or not.
Also, I recommend you to take a look at the transaction ABAPDOCU. There you wil find hell lot of examples explaining all the scenarios. You will get a good idea .
Please check that and try to implement it yourself. You will be able to make it after doing mistakes.
If you stuck up again after many attempts, paste your code here. We will help you out
Hope you got my concern.
Thanks,
Babu Kilari

Change the info. in control record?

hi...
how 2 change the information in control record?Not in ALE?
bye.

you can use the various options in the IDoc adapter and change the info in the control record.
http://help.sap.com/saphelp_nw04/helpdata/en/96/791c42375d5033e10000000a155106/content.htm
The options like;
1. Apply Control Record Values from Payload
If you set the indicator, the conversion of communication parties to the IDoc partner is only possible for systems that are not logical systems.
If you do not set the indicator, all combinations of communication parties and services are handled as services without party.
If the IDoc XML structure contains a control record during outbound processing on the Integration Server, it is rejected and created again by the IDoc adapter. If you want to include additional values in the control record, set the indicator and provide an appropriate mapping for the values.
Take Sender from Payload
If you want to take the sender of the message from the payload and not from the configuration information in the Integration Directory, set this indicator.
If you do not set the indicator, the information is taken from the configuration in the Integration Directory.
Take Receiver from Payload
If you want to take the receiver of the message from the payload and not from the configuration information in the Integration Directory, set this indicator.
If you do not set the indicator, the information is taken from the configuration in the Integration Directory.
To know more abt the control records, ref: http://help.sap.com/saphelp_nw04/helpdata/en/13/95244269625633e10000000a155106/content.htm

For FaceTime, can you add an additional e-mail that is not your Apple ID e-mail? Everytime I try to do this on my iPad it sends me a verification e-mail saying I am trying to change the e-mail address associated with my apple ID and wants me to verify.

I am trying to add another e-mail address to FaceTime, but do not want to change the e-mail address associated with my Apple ID. Everytime I try to add the e-mail address in my FaceTime settings, it send me a verification e-mail asking me to verify that I want to change to this new e-mail address for my apple ID. I do not. I just want to have an additional e-mail address for people to contact me via FaceTime. Does anyone know how to do this?

You can have multiple addresses associated with your apple id. You will have to verify any changes before they can be added and this is done by sending you an email. This is to protect you from someone else makeing changes to your account.
You can make any changes and view all your info here:
My Apple ID
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

Exporting a project with multiple audio tracks changes the loudness level regardless of export format

I recently had to submit a TVC and discovered that premiere was changing the loudness level after export, when the TVC failed the quality check.
I checked the audio loudness of other formats that I had exported and the same thing had happened the audio loudness, it had changed.
After a bit of troubleshooting I found a workaround. I mixdown all of the tracks in adobe audtion to one track and then imported it into premeire.
Once I did this the audio loudness was not changed after exporting.
Workflow for when it didn't work.
I used edit in adobe audtion for the audio tracks from premiere.
Matched the audio to the loudness level I wanted, and then saved each track.
Export from premiere.
To Check Audio Loudness
Bring in exported file into new premiere project
Edit the audio in adobe audtion.
Drag the audio file into match audio to check loudness level.
I am using
Adobe Premiere Pro CC v8.1
Windows 7 on PC
Please fix this adobe.

I recently had to submit a TVC and discovered that premiere was changing the loudness level after export, when the TVC failed the quality check.
I checked the audio loudness of other formats that I had exported and the same thing had happened the audio loudness, it had changed.
I have never experienced that or had any need for a work around.
What did your Broadcast Quality Control pick up on?
Audio Levels and Loudness are two different things in this regard.

I-tunes not kompatibel with Windows 8. Every time I want to load my Ipod or Iphone I have to change the compability to, for instance windows vista. Otherwise Itunes refuse to recognize my Ipad/phone. Can I expect that Itunes will "fix" this problem? Carin

I have problems with I-tunes and the compability with windows 8. Every time I whant to load my Ipod/Iphone Itunes doesn´t recognize the pod/phone. If I change the compability to for instance windows vista it works ok.
I guess that I need some update of Itunes?
carin

Hey carin205,
I would run through the troubleshooting steps in the following article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Welcome to Apple Support Communities!
Regards,
Delgadoh

I activated this week my Photoshop and Lightroom CC and noticed it is a dutch version but in the past I always worked with an english version. Can I change the dutch version for an english ? Thanks. Peter

I activated this week my Photoshop and Lightroom CC and noticed it is a dutch version but in the past I always worked with an english version. Can I change the dutch version for an english ? Thanks. Peter

Hi t Forograafken,
You can check your Creative Cloud Application Preferences to see if 'Deutsch' is chosen.
You can change the App language from here :
Regards,
Rave

When I create a rectangle, I can not to change the shape of a rectangle with the cursor in illustrator CC 2014 For what?

When I create a rectangle, I can not to change the shape of a rectangle with the cursor in illustrator CC 2014 For what?

Xavigarcia,
I am afraid you have come across the Live Rectangle bug which is limited to the MAC versions starting with 10.7 and 10.8, but not 10.9 (Mavericks) or 10.10 (Yosemite). Hopefully, the bug will be fixed soon.
So a switch to Mavericks or Yosemite with a reinstallation might be the way to solve it here and now.
To get round it in each case, it is possible to Expand the Live Rectangles to get normal old fashioned rectangles, or to Pathfinder>Unite, or to use the Scale Tool or the Free Transform Tool.
A more permanent way round that is to create normal old fashioned rectangles, after running the free script created by Pawel, see this thread with download link:
https://forums.adobe.com/thread/1587587

I need to change the input level and I can not open the track info pane in the new garageband. Can you help me?

I have tried the help menu. It only shows how to open the track info pane in the old garageband. It shows the info button, which is not in garageband anymore. I need to open the track info pane to change the input level. If there is another way to do this please tell me.

Open the "Smart Controls" for your track, and then press the Info button .
The "record level" slider is at the top of the Info panel below the track heads.

Change the recording level for recording with Thunderbolt-Firewire-Mixer

Similar Messages

Maybe you are looking for