Change the screen of my ipad 2

I want to know how to change the screen of my iPad 2 and the price of it?

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
The warranty will apply to the country of purchase. And if there is a problem needing repair you have to return it to the country of purchase.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th, Air
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iCracked - Broken iPhone, iPod or iPad
http://www.icracked.com/
iReVamp Electronics Screen Repair ($99)
http://www.irevampelectronics.com/ipad-2-broken-glass-screen-repair.html
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Do It Yourself iPad Repair
http://www.ifixit.com/Device/iPad
 Cheers, Tom

Similar Messages

Hay. i change the screen LCD in IPAD 2 3G but i don't know what happen. She was working and every thing it's ok. One time i turn off the ipad and turn on more time, i don't see good in LCD the brightness is to low and i can see any thing

Hay. i change the screen LCD in IPAD 2 3G but i don't know what happen. She was working and every thing it's ok. One time i turn off the ipad and turn on more time, i don't see good in LCD the brightness is to low and i can see any thing!! and i want to know why is happen

Assuming you mean that you performed the repair yourself, it would seem that you either obtained a defective screen or you did some sort of damage when you replaced the screen. You can try asking for assistance on ifixit.com, a site dedicate to those attempting their own repairs, or you can take the iPad to a shop and pay them to try to correct the problem for you. Apple will no longer touch your iPad now that you've attempted your own repairs.
Regards.

How do I change the iTunes library my iPad is synced to?

How do I change the iTunes library my iPad is synced to?

My recommendation would be to set this up as a brand new iPhone, just as if it came out of the box.
Do that in Settings > General > Reset > Erase all content and settings
You will then be directed to the welcome to iPhone screen, just as you would with a brand new device.

Can I change the screen saver on my apple tv? or change the display to the awesome equalizer while i stream my music?

I am trying to find a way to change the screen saver for my apple tv while I stream my music. Anyone have a solution? Besides my photos, can i show the awesome equilizer? Or can I show the album artwork screensaver that the macs have? I feel like this feature is much needed on the Apple TV while I stream my music to the Apple TV 2nd generation!

Hi byee322!
If you are using devices that meets these criteria:
iPhone 4S (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)1
Apple TV (2nd or 3rd generation)2
Wi-Fi (802.11a/g/n) network
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
you may want to try using a feature called Airplay Mirroring to show whatever you'd like on the screen while your music is playing. We have a couple of articles about that online that can tell you more information about Airplay Mirroring. The first one here is about using Mountain Lion to mirror the display from your Mac onto the TV to which the Apple TV is connected, and can be found here:
About AirPlay Mirroring in OS X Mountain Lion
http://support.apple.com/kb/ht5404
The second is an article with more information about Airplay Mirroring in iOS, and can be found here:
iOS: How to use AirPlay Mirroring
http://support.apple.com/kb/ht5209
Thanks for using the Apple Support Communities!
Cheers,
Braden

How much does it cost to change the screen of a cracked iphone 5 or how much it cost to change the phone

I have an iphone 5 and the screen is cracked how much does it cost to change the screen or how much does it cost to change the phone in canada quebec?

If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5s. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit

The screen on my Ipad stopped, what do I do?

The screen on my Ipad is black, but the ipad still works. now called, hung up, restored but does not change, what do I do? PLEASE HELP ME ;A;

Press the home button and lock button for a few seconds then your iPad will restart then your done

How do I change the apple ID my iPad is associated with

I'm trying to figure out how to change the Apple ID our iPad is associated with. My husband bought the iPad and set up a new Apple ID instead of using mine. Now we cannot use iCloud to sync all of our devices. Any help out there?

Hi there
Try this...
1. Settings
2. Store
3. Click on 'Apple ID'
4. Click on 'Sign Out
5. Click on 'Sign In'
6. Click on 'Use Existing Apple ID'
7. Type in your Apple ID
Hope that helps.
Cheers

Why does the screen on my iPad mini jump around? Apps open and close, I can't get back to the home screen. Is my mini possessed?

Why does the screen on my iPad mini start jumping--larger, smaller--can't close apps. I reboot and still it happens. Any suggestions?

If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.

How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.

Settings>General>AutoLock>Never. Now it will not sleep at all so change it back when you are done reading.

How to change the screen element of a single field in a table control

Hi Gurus,
I want to change the screen element of a single field (or the whole row) in a table control according to a condition.
I have 2 columns in the table control. One is an input column and one output only. When user enters values into the input column, they need to be compared against the values in the other column, and if there is a discrepancy, the row where the discrepancy is needs to be highlighted.
I have tried the following code which highlights the whole column ...
CONTROLS: TC_ZVOYG_BINS TYPE TABLEVIEW USING SCREEN 0500.
DATA: wa_tc_zvoyg_col LIKE LINE OF TC_ZVOYG_BINS-cols.
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          wa_tc_zvoyg_col-screen-intensified = 1.
          MODIFY tc_zvoyg_bins-cols FROM wa_tc_zvoyg_col TRANSPORTING
          screen-intensified WHERE screen-name = screen-name.
        endif.
      endloop.
    endif.
endloop.
And also the following code which makes no change ...
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          screen-intensified = '1'.
          modify screen.
        endif.
      endloop.
    endif.
endloop.
Thanks in advance.

Hi,
The modification of a screen element attribute (LOOP AT SCREEN...MODIFY SCREEN) must always be done in the PBO (for a dynpro, it will be in a PBO module, i.e. declared by MODULE ... OUTPUT)
About the loop at the internal table, it is done automatically by the system, also during the PBO, you'll find something like LOOP [AT itab] ... WITH CONTROL ... in the PBO part of the screen flow logic (note: you may have to complete with a supplementary READ TABLE if you don't use AT itab). So you don't need an additional loop.
Best regards
Sandra

Do I have to back up the data of my macbook white unibody if I am changing the screen because of the crack problem at the the back of the screen?

Do I have to back up the data of my macbook white unibody if I am changing the screen because of the crack problem at the the back of the screen?
They told me to bring it to the genius at the apple store. They will change it for free but I don't have any physical place to back up my computer, they said it will take a coupe of days. I am not really sure if I have to back it up.
Thank you.

gmedina172 wrote:
Should I use time machine? ...
Mac 101 Time Machine > http://support.apple.com/kb/HT1427
Time Machine Tutorial > Time Machine Tutorial
Video on Restore From Time Machine
http://support.apple.com/kb/VI29

How do I change the screen size to standard in iMovie 10?

I can't seem to find where to change the screen to standard size - in previous imovies it gave the option when creating the new project but this version doesn't seem to.

Star with:
Menu > File > New from Template Chooser > Sidebar > Page Layout > Blank > Blank Canvas
If you need to have two cards on one page then just set up one using text boxes and images to the 4 x 6 (inches?), group them and option shift drag a second copy down the page so you then have 2 and alter the copy as you need.
Change the text and images to placeholders, capture those as a Layout and then save that as a template.
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&highlight=labels &mforum=iworktipsntrick
1. To make the individual card follow the instructions for Labels & Business cards but use your size:
2. To make the placeholders see Double folded Greeting Card.
3. To make the template follow Letterhead and follower sets ignoring the irrelevant bits, and only capturing one page, before saving as a template.
Peter

Is there any way to change the screen resolution in Front Row?

Hi all,
I've got a Mac Mini plugged in to my TV, and I want to be able to change the screen resolution depending on the content I'm watching (as some content is in 4:3 aspect ratio, some is in 16:9, and I'd prefer to have the picture filling the screen completely). Unfortunately, the TV doesn't have a "stretch" mode for making an 4:3 picture fit a 16:9 aspect ratio. If I know what I want to watch in advance, I can set the resolution accordingly using system prefs on the mac, but if I'm just sitting back choosing what to watch with the Apple Remote, it's annoying to have to leave front row, walk over to the computer and change resolution once I've decided what to watch, open system prefs, change resolution, re-launch Front Row and find what I wanted to watch again.
So I was wondering if anyone had figured a way to allow the screen resolution to be switched from within the FrontRow UI. I've seen that people have written python based plug-ins such as PyeTV and Understudy that allow different types of content to be added to FrontRow, but I've not found any utility plug-ins such as what I'm looking for on the net (nor could I find SDK documentation on this API in the stuff that comes with XCode).
I guess the other approach might be quick keys: has anyone had any success hooking up quick keys macros alongside front row in response to apple remote events? (seems too few events to be able to choose from, but I've never tried it, so I won't assume!) Or how about is there a way to trigger an AppleScript from within Front Row? And, of course, I'm very open to any other ideas you might have!
Thanks very much in advance for any ideas on this.
Andy
Message was edited by: Andy__D

Safe Boot from the HD, (holding Shift key down at bootup), set a good rez there.

HT1766 I have made the C drive on my computer very small, with the intention that all data would be stored on the D partition. Can I change the destination for my iPad backup to the D drive?

I have made the C drive on my computer very small and try to put all the data on the D partition. Can I change the destination for my iPad backup to the D drive?

See if this post from turingtest2 helps : https://discussions.apple.com/message/24351688
If not then you might be better off asking in the iTunes For Windows forum, you may be more likely to get better help there.

How to change the screen resolution

Dear All,
Could someone please help and tell me how I can change the screen resolution (i.e. the dimensions of the monitor) in Solaris 10 using CDE?
Regards and thanks a lot for your reply

This site has some instructions on how to do this: http://solaris-x86.org/documents/tutorials/cde.mhtml

Change the screen of my ipad 2

Similar Messages

Maybe you are looking for