Change the selection while I'm typing
Hi everyone,
It is possible with some webdynpro control, like DropDownbyIndex, to select from a list of text the word that I'm typping. something like while I'm typping a word, the control change the selection in the current list automatic.
Thanks in advance,
Hi,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/2833ce90-0201-0010-f1af-d3cfe1155b16
Regards,
Sudhir
Similar Messages
-
How to change the selections in selection screen
Hello all,
while executing web report we are getting a selection screen initially.
1.problem is when we want to change the selections how to procedure after .
when i went to variable screen it is filtering the exciting report. but i want to change the selection.
2.when i run the query in Excel i can see the report as below
Cust1 Mat1 100
Cust1 mat2 20
but when i run in web it is showing as below
Cust1 Mat1 100
Mat2 20
how can i get Cust1 for both Mat1&Mat2 in Web
Thanks in Advance
SandyHi Sharan,
This is Ram, i have been watching this Thread, and tried to solve this problem in the Web to one of my query which i have created for testing purpose.
See dont have much knowledge on WAD, but as the main owner was doing in his case , i am also doint the same way :
Ex: i created the query in the query designer and there i know each and very property how to supress the repeated key etc etc, and i know it even in the Web browzer.
However what i do is i open the query and click on change query and my query is displayed in the query designer and from there you click on the check mark in the top left for executing the query, but insteard of that click on the icon which takes you to the BROWZER.
I usually do like that, but what you told in WAD i did not understand it at all, so can you give me more steps on how to open that in WAD and make the settings please...
Regards,
Ram Pawan -
How can I change the 'selected' color of one JToggleButton only.
Hi,
This seems like a simple / trivial question, but I just can't figure it out. Is there a way that I can create a JToggleButton and change the selected color of only that JToggleButton.
I'm trying to create a simple sidebar like component for navigation within my app. A group of JToggleButton[s] added to a ButtonGroup (with the proper layout / sizing) works great, but the default JToggleButton colors don't suit my needs. I know that I can change the colors using the UIManager / UIDefaults, but I don't want to change the defaults for every JToggleButton in my app. I only want to change the defaults for a few select JToggleButton[s].
For example, I can do this:
UIManager.put("ToggleButton.select", UIManager.getColor("Table.selectionBackground"));
UIManager.put("ToggleButton.background", UIManager.getColor("Table.background"));but I'd rather do something like this:
JToggleButton jtb = new JToggleButton("Toggle Button Text");
jtb.setSelectedColor(UIManager.getColor("Table.selectionBackground"));
jtb.setBackground(UIManager.getColor("Table.background"));The only thing is, I can't find any method that is the equivilant of 'setSelectedColor(Color)' for JToggleButton.
I know I could do it by adding some listeners to the JToggleButton[s], but that seems a little complicated for something like changing a color.
I'd also seen a solution in the forums where someone had extended the ButtonUI of the pluggable look and feel they were using. I'm not interested in modifying the look and feel I'm using. As far as I'm concerned, that would defeat the purpose of having a pluggable look and feel as I would have to duplicate my efforts for every look and feel I want to use.
Any help would be appreciated,
Ryantry this
import javax.swing.*;
import java.awt.*;
class Testing extends JFrame
public Testing()
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setSize(250,75);
setLocation(400,300);
JPanel jp = new JPanel();
JToggleButton jtb = new JToggleButton("Toggle me");
jtb.setUI(new MyUI());
jp.add(jtb);
getContentPane().add(jp);
public static void main(String args[]){new Testing().setVisible(true);}
class MyUI extends javax.swing.plaf.metal.MetalToggleButtonUI
public Color getSelectColor(){return Color.BLACK;}
} -
CRM - change the selection fields in standard extractor
Hello everyone!
I would like to change the selection parameters for the DataSources 0CRM_SRV_PROCESS_H and 0CRM_SRV_CONTRACT_H in order to include the field CHANGED_AT. However, in the DataSource definition this field appears grayed out (even in process mode).
Is there any way I could change this?
If not, I was thinking about appending a custom field with the the same information and include this in the selection criteria. Would this work?
If not, could I create a generic DataSource whose function module would internally call the standard DataSources own FM with the standard selection criteria and then filter it out further with my own criterion?
Performance is not really an issue here.
Thanks in advance for any input on this!
Best Regards,
Luís Andrade.Hi,
>
scoy123 wrote:
> I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction
Refer:-
CONSTANTS : c_comment(20) TYPE c VALUE 'write your comment'.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) c_comment.
PARAMETERS : p_matnr TYPE matnr.
SELECTION-SCREEN END OF LINE.
Hope this helps you.
Regards,
Tarun -
Can I change the select option text for pnp ldb ?
hi Akll,
I am using a pnp logical database in my report and I have created my own hr category because i wanted to use field ename from the ldb in the selection screen. Now the problem with ename is I cant do a case sensitive search.
So I have replaced it with sname, so now my screen has sname instead of ename, however I want to change the selection text for select option ( at present it is 'EE name can be sorted' )
Kindly advise,
thanks,
GVI guess the text cannot be changed.. anyways you can add the field as an additional field by normal coding in your report
-
How to change the select options selection text dynamically in webdynpro abap ?
I am using standard interface WDR_SELECT_OPTIONS.... i want to change the Selection text dynamically in my select options.I.E. if the select option is for VBELN field than i want to change its description SALES ORDER Number through Code to some other text.
If anyone can please help me in this.Hi,
You can achieve your requirement as below
Get the range table of your selection field as below
data lt_range_table type ref to data.
wd_this->m_handler->GET_RANGE_TABLE_OF_SEL_FIELD(
exporting
i_id = 'VBELN'
receiving
rt_range_table = lt_range_table ).
Update the selection field with new description - 'Your New Text'
wd_this->m_handler->UPD_SELECTION_FIELD(
exporting
I_ID = 'VBELN'
I_DESCRIPTION = 'Your New text'
I_IS_AUTO_DESCRIPTION = abap_false
IT_RESULT = lt_range_table ).
You can also pass the other parameters as per your requirement
Hope this helps you.
Regards,
Rama -
How can i change the font while im coding?
How can i change the font while im coding? I am not talking about the final product and inserting fonts in my documet i am talking about when i am in the progress of coding I want to change the font so it is way more pleaseing to the eye when I am staring at it while coding? please do help and thanks!
Editing the source is a bit of a pain because you'll have to redo it after every update. It's better to write yourself a mini-extension that adds a new stylesheet -- that is also very simple to do. Just follow these instructions: https://github.com/adobe/brackets/wiki/Customize-Your-Code-Font.
- Peter -
Change the permission while placing the file
Hi Experts,
I have a production issue :
I am placing the .txt file into a SFTP server location from a SFTP Location[NO Transformation in the file]. (Sender and receiver channels are SFTP)
I am using user- user1(for example) which have the read write access to the particular folder, hence when it places the file it places with 664 permission .(This permission gives only user1 as read/write access , but other user have read only access).
The requirement :
The user2 want to deletes the file from the particular folder location , they want to know by any means can PI change the permission while placing the file into that location so that user2 can also have read/write access.
Can you provide the opinion whether it can be done using SFTP receiver channel or any other option to change the permission of the file.As far as i know the permissions are related to the folder and the User not for files
While creating the access, a particular user authorizations related particular folder, not related to files.
So this should be done some thing like by giving the read/write access to user2 as well
Regards -
How can i used pai in screen 1000 to change the select-options field?
hi,all.
I want used pai to change the select-options field,but it can't works.
the mainly code is:
REPORT ZTEST99.
TABLES :MARA,MAKT,MARC.
SELECTION-SCREEN BEGIN OF BLOCK B0 WITH FRAME TITLE TITLE0 .
select-options:s_matnr for mara-matnr,
s_werks for marc-werks MODIF ID ID1.
SELECTION-SCREEN END OF BLOCK B0.
parameters:p_flag as checkbox.
at selection-screen OUTPUT.
LOOP AT SCREEN.
IF P_FLAG = 'X' .
IF screen-group1 = 'ID1'.
screen-input = '0'.
ELSE.
screen-input = '1'.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
START-OF-SELECTION.
CALL SCREEN 1000.
when i click p_flag,then i want to change s_werks from OBLIGATORY to no OBLIGATORY.
how can i realized?
Thanks for all.
SunHi ,
change your code like this.
Change in your code:
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECT-OPTIONS : s_matnr for mara-matnr,
s_werks for marc-werks MODIF ID ID1.
SELECTION-SCREEN END OF SCREEN 100 .
At selection-screen.
if sy-dynnr = '100'.
IF P_FLAG = 'X' .
LOOP AT SCREEN.
IF screen-group1 = 'ID1'.
screen-required = '0'.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
else.
LOOP AT SCREEN.
IF screen-group1 = 'ID1'.
screen-required = 1.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
my code :
REPORT Z50871_SELECTOPS_DYNAMIC.
PARAMETERS : CH_EBELN AS CHECKBOX,
CH_VBELN AS CHECKBOX.
DATA: V_EBELN TYPE EKKO-EBELN,
V_VBELN TYPE VBAK-VBELN.
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECT-OPTIONS : EBELN FOR V_EBELN MODIF ID G1,
VBELN FOR V_VBELN MODIF ID G2.
SELECTION-SCREEN END OF SCREEN 100 .
AT SELECTION-SCREEN OUTPUT.
IF SY-DYNNR = 100.
IF CH_EBELN = 'X' AND
CH_VBELN = ''.
LOOP AT SCREEN.
IF SCREEN-GROUP1 EQ 'G1'.
SCREEN-ACTIVE = '1'.
ELSE.
SCREEN-ACTIVE = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF CH_VBELN = 'X' AND
CH_EBELN = '' .
LOOP AT SCREEN.
IF SCREEN-GROUP1 EQ 'G2'.
SCREEN-ACTIVE = '1'.
ELSE.
SCREEN-ACTIVE = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF CH_EBELN = 'X' AND CH_VBELN = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 EQ 'G1'
OR SCREEN-GROUP1 EQ 'G2' .
SCREEN-ACTIVE = '1'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
ENDIF.
AT SELECTION-SCREEN.
IF SY-DYNNR = 1000.
IF CH_EBELN = 'X' OR CH_VBELN = 'X'.
CALL SELECTION-SCREEN 100.
ELSE.
MESSAGE I000(Z50871MSG) WITH 'Please select atleast one checkbox'.
ENDIF.
ENDIF.
regards
Sandeep Reddy -
Is there any event listener for changing the selection of layer?
Hi all,
I am looking into an event listener which fires on changing the selection of layer. I found 'Select' event listener which fires on selecting the different object.
Actually the problem with Select event listener is that when we select an object and move it and deselect it by clicking on the document, event fires on the selection of that object. But if we again select the same object and move it, no event is fired at that time.
Is there any workaround of this? So that the event is fired every time when we select the same object.
Please help me on this..
Regards,
VG.Thanks for the reply..
Actually I want the same behaviour as in illustrator i.e
- Select a layer. (Notifier calls the listener)
- Move it.
- Click on the document.
- Again select the same layer. (Notifier calls the listener again)
- Move it.
But in photoshop,
- Select a layer. (Notifier calls the listener)
- Move it.
- Click on the document.
- Again select the same layer. (Notifier doesnot calls the listener again as the layer is already selected in panel as you explained.)
- Move it.
Is there any way to get the same behaviour of illustrator in photoshop? -
I want to change the selection text in the standard report/transaction .
I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction
Hi,
>
scoy123 wrote:
> I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction
Refer:-
CONSTANTS : c_comment(20) TYPE c VALUE 'write your comment'.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) c_comment.
PARAMETERS : p_matnr TYPE matnr.
SELECTION-SCREEN END OF LINE.
Hope this helps you.
Regards,
Tarun -
User exists for changing the selection screen of the transaction CS11
Hi,
I want to change the selection screen of the transaction cs11 and modify the ALV output.
I searched the old forums but not got satisfactry results.
I want to change the plant and material from the parameter to the select option.
i dont want to copy the transaction for the zcs11.
any suggestion on this ?
Regards,
udupione more requirement i have is that, i need to remove all the header fields such as material , plant etc and place that field in the item level. i can use the user exists PCSD0002 for the adding the customer field in the item. but how can i removed the header level field such as plant and material. whether we have any user exits for that?
-
How to change the selected tabPane title color in JTabbedPane
how to change the selected tabPane title color(or set bold) in JTabbedPane.
Any advice will be appreciate.Hi,
try
// Set text color for the selected tab
tab.setForegroundAt(tab.getSelectedIndex(), Color.red);Hope that helps -
How to change the selection background color of the selected item in the popup menu of the choice box ?
By defaut, the selection background color likes "blue", but if I want it to be "yellow" for example, how should I do ?
ThanksThe id is applied by (I think) the skin class of the ChoiceBox. You don't need to define it.
You have to apply the css in an external style sheet. You can apply the external style sheet to any parent of your choice box, or to the scene (the most usual way to do it).
Example:
import java.util.ArrayList;
import java.util.List;
import javafx.application.Application;
import javafx.scene.Scene;
import javafx.scene.control.ChoiceBox;
import javafx.scene.layout.VBox;
import javafx.stage.Stage;
public class ChoiceBoxTest extends Application {
@Override
public void start(Stage primaryStage) throws Exception {
primaryStage.setTitle("Example 2");
final ChoiceBox<String> choiceBox = new ChoiceBox<>();
List<String> tempResult = new ArrayList<String>();
for (int i = 0; i < 10; i++) {
tempResult.add("Item " + i);
choiceBox.getItems().setAll(tempResult);
VBox root = new VBox();
root.getChildren().add(choiceBox);
final Scene scene = new Scene(root, 300, 250);
scene.getStylesheets().add("choiceBox.css");
primaryStage.setScene(scene);
primaryStage.show();
public static void main(String[] args) {
launch(args);
choiceBox.css:
@CHARSET "UTF-8";
#choice-box-menu-item:focused {
-fx-background-color: yellow ;
#choice-box-menu-item .label {
-fx-text-fill: black ;
Message was edited by: James_D -
Marking an in or out point in the event browser changes the selected clip
I'm getting quite infuriated with this issue at the moment. I'm not sure if it's a bug, or I'm doing something wrong.
I've created collections of subclips by tagging ranges with keywords in the event browser. I'm now trying to edit these onto the timeline. I find the clip I want in the browser and use JKL and IO to mark the in and out point of the actual part of the clip I'm going to use. The problem I'm having is that sometimes - not all the time - pressing I or O changes the selected clip in the event browser.
Any ideas what's going on?
Many thanks in advance for any help you're able to offer.Changes how? Post screen shots of what you're seeing and what you expect to see.
Maybe you are looking for
-
Hi there when Im trying to install os x mavericks it goes to download
Hi there when Im trying to install os x mavericks it goes to download
-
How to resolve "Internal error: ABAP Report cannot be loaded" error
Hi All, I am new to SAP.Please help me out from this problem. When I am trying to debug BSP page, in debugging mode it shows "Internal error: ABAP Report cannot be loaded" error and then dumps. In transaction ST22 it shows this dump something like t
-
How to convert a word document to pdf
How do I convert a word document to pdf
-
Lost phone, trying to iMessage from phone number on Mac
So I lost my phone the other day and its off (I'm assuming it got ran over I think I dropped it out of my car) and I want to imessage from my verizon number from my computer until I can get a new phone... But my icloud email won't connect my phone nu
-
Install Oracle Database 10.0.1.4.2
Hi All, I am wondering how can I install this version of the Oracle database? In particular I have installed the Oracle Database 10.1.0.2.0 database, and am currently applying a patch set to get the database to version 10.1.0.4.0. How can I get this