Change the sequence settings from NTSC 30 fps to PAL 25 fps, is possible?

Hello,
I have a finished project that was make in a sequence with the format NTSC 30 fps. Now I need to change that sequence and the project to PAL 25 fps. I have changed the settings of the source secuence to PAL 25, but in the resulting sequence the audio and the videos are different in time and speed.
With the videos I have make a match frame to find the source, but with the audios I have problems. ¿There is a automatic proccess in final cut pro 7.0 that could make a translation of a finished sequence that was developed in NTSC 30 ftp to a PAL 25 fps?
Can you give me a tip or something to make the trasnlation ?
Thanks in advance

Sorry...but it isn't as simple as changing a project frame rate. FCP is NOT good at mixing frame rates. And when you put NTSC footage (29.97fps), into a PAL timeline (25fps), that is exactly what you are doing. No, this won't work. No magic solution for this (although Avid MC5 does this nicely).
You are going to have to export a QT file, and let Compressor tackle this job (and it will take a WHILE, and you will have to run a few tests to see if your settings work to your satisfaction), or take that QT file to a post house with a Terranex or Snell/Wilcox to do the conversion ($$$$)...or output to tape AND THEN do the Terranex thing.
No easy button here.
Shane

Similar Messages

Changing the Videocamera Framerate from NTSC (30fps) to PAL (25fps)

When I am using the IPhone4 videocamera (with ios4.2.1) ... the framerate is something between 23.999 til 30 frames. That is very horrible for european and australian users because there is the PAL standard of 25fps valid. If you transform movies with a framerat of 30 to 25 frames, the movie looks very ugly. The picture jumps because of lost pictures through the transformation.
A videocamera without a option button for NTSC (30fps) or PAL (25fps) is for people out of NTSC Country very useless. Why doesn't fix Apple this? Evere simple Videocamera in a Handy has this option. HD 720 helps in that case nothing.

glad I could help... you're welcome...
Apple is letting the side down with it's intuitive software on that front!
... hmm, I'm pretty sure, they spend hours in a sweaty conference room, discussing "but widescreen isn't NTSC, HiDef isn't NTSC - so it HAS to be called by its fps!" - "but NO ordinairy user knows the framerate of its homevideo!" - "yeah, but the new formats are not standard, so it's not NTSC!" - "yeah, but a US video is called NTSC, that is standard" - "but what about Japan?" - "..."
finally, the "enigneers" won.. technical correct, but for you and me.. cryptical.
thanks for The Big Green One

I need help changing the sequence settings to my video

I shot on a JVC Everio in 720x480 29.97fps. I normally shoot in 1080x420 so I know the picture quality isn't going to be AS good. Normally, when I drag my clips into the timeline Premiere changes the sequence settings for me and everything looks fine. However when I drag this footage (the 720p) in, it becomes elongated and fuzzy.
I've messed around with the sequence settings by using DV-NTSC widescreen 48kHz and DVCPRO50 480i NTCS widescreen. When I drag my clips in they're cropped really close and they still look a bit off when I change the image to fit the screen (DVCPRO 50 looks a little bit better).
When I shot the video it looked crisp and clear on the monitor. I'm wondering if it looks strange because of the sequence settings and if so, what would be the best settings for this video.
The final video is going on youtube and I would like to make it look as good as possible!
Please let me know if you can help me out!

However when I drag this footage (the 720p) in, it becomes elongated and fuzzy.
What 720p? You gave us two frame sizes. Neither of them are 720p.
1080X420 is a very strange frame size. And you say it is normal? A 720p video is 1280X720 non-interlaced.
Chances are very good that it is 480i video you shot with a frame size of 720X480 and it is interlaced.
That video should be interpreted with a Pixel Aspect Ratio (PAR) of 0.9091 (rectangular pixels that are taller than they are wide) - and what that means is that it isn't 16:9 it is 4:3 and should be edited in a 4:3 sequence. If, however, Premiere Pro is seeing the footage as having a PAR of 1.0 (square pixels) then you may have to right click on the clip in the Project Panel and select Modify|Interpret Footage and set it to D1/DV NTSC (0.9091)

My grand daughter has changed the app settings from uk to USA now all the apps are priced in dollars any idea how I can change this back.

Can anyone help.
My grand daughter was playing on my iPad. She has some how changed the app for buying apps from uk to the USA. Now all the apps are in dollars and I cannot purchase any because of this.
Any idea how I can change it back. She can't remember what she did.

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the country/region where you are located.
9. Tap "Done".
Note: If the change doesn't take effect, sign out of account and sign in again.

E51 Calendar: Change the default settings from pri...

Hi,
By default on my E51, a new meeting in the calendar created on the phone is Private.
So the details are hidden when it is published on my Outlook Calendar.
Does somebody know how to change the settings in order to have all new meetings in the Calendar with the option Public by default?
Thanks in advance

Does somebody know?

Please Help! I created a PP file on a Mac and need to finish it on a PC? How do I change the sequence settings? Cross-platform usage??

I need to know this as soon as possible. How do I allow this file to work on a PC. Thanks

Yes I opened it and it said "This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
So what I did is open a new file, clicked Import, clicked on the project I've been trying to open and imported the selected sequences, since it wouldn't let me import the whole project. Now all the clips are in a bin, but how do I put it on my timeline as if it were the whole project I was working on? If I select the imported file, the clips appear on the timeline all scrambled and just as that, clips. Essentially I have clips but need the sequence (project) I had created.

FCP 7 crashes when choosing "yes" to changing of sequence settings for Flip

I've been doing quite a bit of work with the Flip HD video camera recently. I grew tired of rendering everything, so decided it was time to finally upgrade from FCP 5 to FCP 7.
However, FCP 7 crashes every time I try to lay down video files from the Flip camera onto a timeline.
Upon laying the files down onto the timeline, I am prompted with the message asking if I want to change the sequence settings to match the video. I click yes and immediately get "General Error" and FCP crashes.
I tried trashing the preferences. same result.
I tried updating FCP 7 to FCP 7.0.1. same result.
I even tried updating fixes for iMovie as if that would have anything to do with it. same result.
I'm currently rendering it out the same way I had been in FCP 5.
Any advice or ideas?

AVC is h.264, which is not a work-able editing format, it's a delivery format (and a consumer video camera acquisition format suitable for holiday videos going straight to YouTube), that's why you've been having to render all the time in FCP 5.
Now you're in FCP 7 and it's asking if you want to change the sequence settings to match the video, but there is no sequence setting to match AVC/h.264 so it's freaking your computer out. Still, it shouldn't crash, but that's the problem i believe.
You need to correct your work-flow by transcoding your media into something usable like ProRes, or you can choose not to change your sequence settings, and render the timeline as you have been doing in the past.

How Do I Change My Sequence Settings to Match My Clip

Hello -
I shot some footage in SD with a frame size of 16:9. When I dragged a clip into my first sequence, FCP asked 'if I wanted the Sequence to assume the properties of the clip?' I hit 'yes' which changed the sequence to match my clip. However, when I created a new sequence(in the same project) and dragged a clip into it, FCP did not prompt me with the option to change the sequence settings. Now, I have a 4:3 sequence with a letterbox 16:9 clip. Any suggestions on how to fix this? Thanks for your help!
Isaiah Smith

menu: Sequence Settings (or Commnd 0).
Then check (√) the Anamorphic checkbox.
OK
Then select everything in the timeline. (Command A)
Command Option V (Remove attributes). Make sure Distort is checked (√)
OK.
Done

When I choose to open a new tab from a website, such as facebook, it always opens it in a new window. How do I change this to just opening a new tab. I tried changing the tab settings but it did not work

When I choose to open a new tab from a website, such as facebook, it always opens it in a new window. How do I change this to just opening a new tab. I tried changing the tab settings but it did not work. I did not have the problem until I started using firefox 4.

It is probably a JavaScript link.
You can probably force it where you want it with a keyboard shortcut
either "Ctrl+click" or "Ctrl+Shift+click". see
* Firefox and other Browser Keyboard Shortcuts (Comparison Table) http://dmcritchie.mvps.org/firefox/keyboard.htm
''Did that work?''
Some styles that provide a warning as to the type of link:
* No Follow links, mouseover id of other links - userstyles.org http://userstyles.org/styles/10987
* Change cursor on some links with JS. - userstyles.org http://userstyles.org/styles/233
* Link Warning - Themes and Skins for Mozilla - userstyles.org http://userstyles.org/styles/1301
* Link warning (cursor hover) - various filetypes - userstyles.org http://userstyles.org/styles/2538
* Red hand cursor for .pdf links - userstyles.org http://userstyles.org/styles/553

Cannot change compound clip settings from 1080P 60fps to 1080i 25fps

Hi. I created a compound clip, which for some reason ended up with settings of 1080P 60fps (probably because I added a music track first before any video and just used the automatic settings). After editing a whole sequence and exporting a master file, I realized the settings had been wrong. All my footage is 1080i 25fps.
Only thing is when I tried to change the compound clip settings, I only had other progressive options available. I could not change it to 1080i.
I had to create a brand new Compound Clip with 1080i 25 and paste the clips from the original CC into the new CC. Only thing was a music track was now out of sync with the video (presumably because the fps value in the original CC did not match the footage). I had to retime the audio track to around 99% speed to fit to the video clips again!
Why could I not change the CC settings directly?
Thanks

The compound clip is acting like a project. You can never change the timebase of project once there's media in it. You should copy and paste into a new compound clip if you can.

Where can I change the font settings for the name of the month in iPhoto's calendar project?

where can I change the font settings for the name of the month in iPhoto's calendar project? I just ordered two copies of a calendar I designed in iPhoto and was surprised to find that the calendar's months were printing in something like an Arial 10 pt font. On previous calendars I've printer via iPhoto and Apple, the font was much larger. I've tried every menu option in iPhoto and the Calendar Project program and can't find where this is modifyable. Which leads me to ask, what the heck happened here in the first place? I did not consciously change the default.
I do remember that I got some notice when I first tried to print the calendar about the default font having been changed, but I don't know how this could have happened, and I didn't know what impact that had on the calendar until it was delivered. I typically print about a dozen annual calendars but won't buy another until I've got a handle on this problem. For the most part, the rest of the calendar is okay.
As a P.S. is there anywhere where one can get a power user's manual, or instruction on iPhoto?
Message was edited by: KPAausFrankfort

"Maximum" and "12" usually refer to compression (influencing image quality and jpeg file size in bytes); and as Curt wrote, dpi is meaningless for display by and viewing in web browsers. (It could be a different matter if you are uploading the jpeg files for someone to download from the web to print.)
What are the sequence of steps that you and your batch processing take from Bridge?
You can use call Photoshop's Image Processor from Bridge to create the jpeg files (Tools > Photoshop > Image Processor). In the Image Processor you can set jpeg compression, pixel dimensions if desired, also convert to sRGB (good idea for web display). In my experience the image processor leaves unchanged whatever dpi is set in the source file; or, if none there as might be for a pdf, it will set the dpi value in your New Document Preset Print Resolution (from your Photoshop Units & Rulers preferences).

Hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a

hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a default settings upon installation in previous editions of adobe reader .i use a windows 8 pc now.thank

For sideloaded content the nook pulls the metadata from ePub file itself. I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so no you can't them to behave exactly alike without converting the files.

How do I change the default settings for opening documents on my macbook?

Hi I would like to know how to change the default settings for opening documents on my macbook. Everytime I try to open a doc. it automatically opens with Textedit, instead of Pages or another program.

Select any particular document you wish to fix. Press COMMAND-I to open the Get Info window. In the Open With section select the desired Default Application from the dropdown menu. Click on the Change All button to extend the change to all similar documents.
You can only assign one default application to one type of document.

How do i change my itunes settings from Australian to NZ ?

How do i change my itunes settings from Australian to NZ ?

If you are getting an 'account not in this country' message then try going to the bottom of the Featured tab in the App Store app on your iPhone and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select New Zealand.
If you have moved to New Zealand and want to update your details then you might be able to update your billing address by tapping on your id in Settings > iTunes & App Store on your phone and logging into it, or you can do it via the Store > View Account menu option on your computer's iTunes. If you have a credit card on your account then it will need to have been issued by a New Zealand bank and be registered to your address there.

I changed ISPs and had to change the server settings. Now one of my two email addresses crashes every time I try to read the emails.

At first Thunderbird downloaded every email from the problem account going back to 2011. I changed the server settings to only download emails from the last 15 days and to delete any messages older than 15 days.
I can send emails from this account and my other email account works fine for sending and reading mail. However, this problem account crashes Thunderbird every time I try to read the messages. There are now only 300 messages in the inbox and I've been able to have them marked as read. But I still can't read any of them.
What's the fix on this?

Try to start *Windows* in safe mode with networking enabled.
- Win8 http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including-safe-mode
- Win7 http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode
- XP http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx
Still in Windows safe mode, start Thunderbird in safe mode.
- https://support.mozilla.org/en-US/kb/safe-mode
Does the problem go away?

Change the sequence settings from NTSC 30 fps to PAL 25 fps, is possible?

Similar Messages

Maybe you are looking for