Change the speed of keyframed animations over time???

First and foremost, allow me to present the caviat that I've spent the past couple hours searching the Forum as well as help documents and Apple's site trying to crack this nut.
I have an image of a heart that I've animated to beat like a real heart by applying keyframes to the fisheye filter on the image. I want the heart rate to progressively increase as the video plays out, but to change the increments between every single keyframe seems pretty ridiculous to me. Scrub-mapping (or whatever you call it) won't work in this case, already tried it. Doesn't seem to apply to animations like that, unless I'm not doing it right. Is there any way I can make this work without having to render the heart out as a video and then re-import it into Motion and apply scrub-mapping, or should I just grit my teeth and render it out by itself and speed it up from there? I'm afraid I'll lose the smoothness of the animation if I do that... help!

Please press the or buttons over the posts as appropriate...
Patrick

Similar Messages

How do I change the speed of my animation?

I have animated a sphere and the speed is too fast. Having trouble manipulating the speed.
Thanks.

Since you mention playback, I assume you are referring to a Symbol animation - CORRECT.
Double-click on that particular symbol instance to enter Symbol Edit Mode. Then on the timeline, you should see some 'transition' markers - like I have captured.
Simply select the end of the transition marker and drag it to a new timeline position.
Darrell

I'm on FCPX 10.1.1. Is there a way to change the speed of a keyframe effect? I have still images zooming onto the storyline, but I can't find any way to speed up or slow down the zoom time. Any help would be greatly appreciated.

Is there a way to change the speed of a keyframe zoom effect on still photos? Clip duration doesn't seem to change the zoom speed at all. Any help would be greatly appreciated

Open the video animation (Control-v). In transform>All click and drag the X and Y keyframes (which should be together) – left to speed up the scale change and right to slow it down . It may take a little practice to get this to work (I seldom get it right the first try).
You could do this individually for each clip, or you wanted to adjust multiple clips you can copy and paste attributes to your other other clips.
Russ

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

savannahp
What version of Premiere Elements and on what computer operating system?
Please review the following that I excerpted from an older post here regarding Adobe's PRE_help comments about Hollywood Effect and mention of
Red Noir. Does any of the following apply to any of what is happening to you.
- Whenever I try to add an effect from the Hollywood Looks menu, it brings up a warning that all my previous effects on that clip will be deleted. However it will let me add those same effects *after* applying Hollywood Looks.
This is because of how the Hollywood Looks are designed to be used. Since these are effect presets (multiple effects in combination) that result in a specific "look"; they are best applied in isolation. If any previous effect is applied and we still allow a Hollywood effect to be applied, we will not be able to see what the effect does clearly. For e.g. if you already have a Gaussian Blur effect applied to your clip, and then we allow you to apply the "Red Noir" Hollywood effect, the fact that the "Reds" in the scenes will be highlighted and the others converted to B/W will not be clearly seen since the content is already blurred out. So any previously applied effects was designed to be removed. This holds good even if you apply a Hollywood look "on top of" another one. The previous one will be replaced. Having said that, you can customize the look further by either tweaking an already applied filter or by adding a newer effect on top. That is the reason you can apply an effect on top of the Hollywood Effects and not vice versa.
Please review and consider and then we can proceed from there if necessary.
ATR

I have changed the name and password for my Time Capsule and now the Time Machine will not connect

Mac Book Pro
1TB Time Capsule.
Yesterday I changed the name and password on my time capsule and also the name and password of the wifi network as I was having problems with the speed of the internet when using Safari on any of my devices (1 Macbook pro, 1 macbook air, 27" iMac, iPhone and iPad) all other internet services were working fine (email etc.) This seems to have solved the problem.
However, since then, my time machine back ups will not reconnect and there is no option for me to reconnect to the existing back up for my macbook pro.
When I enter the time machine preferences it shows as below that there are no back ups.
Then, when I go to select a drive to use which should be the MacBook under the Backup disks the only option is for me to Remove Disk...
So, my question is, how do I reconnect to an existing Time Machine back up for my MacBook pro as I really do not want to erase and start all over again.
Warning - In my naiveté, I did click on the MacBook in 'Available Disks' but I got the impression that it was about to start a whole new back up and not work with the existing one.
(And does anybody have an inkling as to why there was a problem with Safari on all my devices? I downloaded Google Chrome and that worked fine).

Simply reset the Time Machine.
See A4 here http://pondini.org/TM/Troubleshooting.html
You can then mount the TC disk in finder after you reboot the computer.
You should be able to reselect the TC disk and then it will say it is going to start a new backup.
Ignore this.. when the TM actually loads the TC disk it will discover the existing backup and continue the backup.. but it will give no hint until it actually starts that it won't start a new backup. you just have to believe it won't.. and mostly it works..
Please also install the widget A1 so you have some idea what TM is doing.

How do I change the speed of the Final Cut Pro X "Ticker" Title option?

I am moving from iMovie to Final Cut Pro X. I used to use the "ticker" title option all the time in iMovie, but when I utilize it in Final Cut Pro X, it scrawls really slow and only shows the first line of text before the video ends. How do I adjust the speed of this option?

This Motion template effect isn't very useful at the moment.
Sadly, the only way of changing the speed is to modify the effect in Motion.
The speed is designed to get the word 'Information' at the default size and default typeface across the screen over the duration of the clip. If you add more text, or change its size, the text will not move off the edge of the screen by the end of the duration of the generator.
Alex4D

IWeb: changing the slideshow image scale and viewing time

I moved my iWeb sites over to another server (iPage) and went through the sites to observe for inconsistencies and problems. While doing this, I noted that my image galleries, when placed into the slides show mode, were very small on my iPad 2 and that they cycled through at a very high speed. I thought this was odd and I wondered if anyone else has observed the same thing? It sounds to me that an HTML under-the-hood modification may be required or a bug fix to the iWeb code is in order, to change the sideshow image scale and viewing time/slide value. Comments? [I suspect that Apple does not hold iWeb bug fixes at or near to the top of its software development to-does priority list. Sounds like I need to change web authoring software.]

Why do you think it's a bug?
Anyway :
Is there any reason photos in an album page display small on the iPad, but normally on an iMac? And videos on a movies page don't play on the iPad, but are OK on the iMac?
I use my own show :
http://home.wyodor.net/photo/

Change the speed of the Directions.HD Template

I want to use this template (Direction.HD) but it goes way too fast for my project. I can't find where to change the speed of any of the elements - particularly the arrows. The only items that I can find a speed on are in the Video Group - the clone layer and the drop zone - but nothing on the arrows. Is there some timing I can do to make the arrows move slower?

you will have to get dirty and dig into all the layers and change their timings. Having not seen this template I don't know if it uses behaviours. If you're not that familiar with Motion this is a great way to learn. You may have to move keyframes to later in the timeline, therefore slowing down the animation, or you might have to fiddle with values in a Behaviour.
hth
adam

How do I change the speed of a video clip after making it a Smart Object?

In order to apply the same Camera Raw filter to every segment of a clip I was going to split multiple times, I converted the whole clip to a Smart Object, applied my Camera Raw filter settings, and then split the clip and deleted some portions. Now I want to make certain portions of those clips slow-motion, but even if I right-click on the right side of the layer and select "Clear Smart Filters", all I see when I right-click on the clip in the timeline are the motion options; I can no longer change the speed or the audio. Is there a way to do this without having to make all the cuts in the beginning, changing the speed and the audio, and then having to go back and convert each individual segment into a smart object and then apply the same ACR filter to each one?

Brett,
Thanks for addressing this question. I tried it and see that the embedded file is the entire clip that I started with, not the trimmed version that I turned into a SO, but at least I could go back and make a change that way in a pinch.
If you wouldn't mind looking at this video between :50 and 1:40, and tell me if you think that AE or PP would give me significantly better results in the jumping segments where I slowed it down to 25%: 2014-06-26 And the last thing I expected to see jump out of the box was Albert Einstein! on Vimeo. I am trying to keep my expenses down by only using PS CC for video editing, and love the Camera Raw filter capabilities. By using PS CC it also lets me lay down my audio and edit to the audio w/o, as Mylenium suggested, outputting my file from PS CC into either AE or PP to do the slow-mo part.
Thanks again for your help!
Tara

How do you change the speed of a detached audio clip?

I have a piece of detached audio. Video Frame rate is 23.98. The piece of Video above it is Video Frame Rate 24.
How do I change the speed of this detached audio clip?

Nope, the Automatic Speed did not work. I exported the XML, and then ran it through X2Pro to try and get my AAF, and it still spits out conform warnings/errors on those same spots. Automatic Speed apparently did nothing helpful to my situation. (Can Anyone explain Automatic Speed?)
Will have to try going through Cinema Tools per the similar issues noted in this conversation: http://forums.creativecow.net/thread/344/28007
Curious to see what FCPX would do with this media, importing the 24p file to a 25 Project cause a noticeable shift in both time and pitch.
I imported the time coded audio separately, and played it against the obviously speed and pitched changed video with embedded audio. The files did not sync.
The audio remained in time and pitch, while the video didn't. So the audio tc doesn't seem to effect playback in FCPX, but video definitely does, and it seems rather buggy.
So, if your video is 24.0 and your audio is 23.98 and you are in a 23.98 timeline, FCPX might be changing the speed of the video without really reporting it. Resetting speed doesn't do anything, hitting "automatic speed" screws it up a bit more (it goes the wrong way). Changing the speed to something like 96% (FCPX reports 96% but I know it's really ((24000/1001)/25) which is just short of 96%. Turning off the "preserve pitch" checkbox actually pitched the audio back to normal.
I didn't create the 24.0 vs 23.9 media that you have, but perhaps you are having similar issues, or a different combination/permutation therein.
But to answer your question, the time coded audio was not changed, only embedded audio.
and
But here some notes which makes things hopefully clearer.
Resampling and changing playback speed are two totally different things.
Samplerate for audio is the same as fps for video (not dpi for video) so let's call it sps.
You can record audio at any sampling rate. But let's take 48 kHz and 32 kHz here.
Record 60 seconds. Once recorded both files as stand alone files will play 60 seconds.
But forced to play back in a NLE timeline with a fixed sps of 48 the first file will playback correctly. The second one will play at 2/3 of the time (32/48). The other way round the 48 sps file will play longer in a 32 sps timeline.
Now for those poor guys who have to work with NTSC:
A real world second is not a second in NTSC video world. Its 1001/1000 seconds.
So selecting a 48k sps audio preset in a timeline preset means that a real world audio of 60 seconds is only 1000/1001x60. That means that those 60 seconds are only 59.94 seconds long. Its too short.
One way - if you stay strictly in NTSC - is to record audio with 48048 Hz. This way a real world 1 second audio will match a 1 second NTSC video.
Next option with BWAVE files is to change the playback settings in the BEXT header of the file. This won't resample the file!!!
Now about the TC. BWAVE doesn't have a TC in a way you're used when handling video. It has a timestamp in the header. This timestamp contains the Samples after Midnight. Based on that the NLE will convert this to TC which can be displayed. So in NTSC world this might give a wrong interpretation.
For example if you have a "Start TC" of 00:10:00:00 (thats what you see on your audio recorder) it means that using 48kHz the timestamp is at 600x48,000 = 28,800,000 samples. Since the real sampling rate in the timeline though is 48048 Hz you have to divide the source stamp by this number. This results in 9.99000999000999 minutes. So for a 23.976 fps project this is a TC of 00:09:59:10.
So setting the Bext header and/or iXML chunk to the correct playback speed will keep everything intact. Again this is without resampling!
Using an AIFF there aren't these options.
So you can edit all the stuff without resampling when using BWAVE. But resampling will happen when you export a final movie.

Is it possible to change the read/write permissions on a time machine back-up of iTunes? I need to restore it, but old version is locked....

Is it possible to change the read/write permissions on a time machine back-up of iTunes? I'm needing to restore it as my phone deleted half our playlists during sync & am not seeing a way to unlock the permissions. I have the current version unlocked, but can't seem to get the backed-up version. When I click on restore I get a pop-up that says iTunes can't be deleted as it is part of the OS. I'm not even trying to delete, just restore the old version. Any suggestions?

Hmmm, ok I'll give it a shot. I've always had the iTunes sync w/ my phone set up to only load selected playlists to the phone b/c there's a lot more in iTunes than I have room or desire for on my phone. A few months back I started having trouble w/ trying to sync everything & subsequently adding more to the phone than it could hold. The quickest thing at the time was to unclick the sync music option in iTunes so I could still backup the phone to the computer & not have a problem.
When I asked about it during one-to-one session shortly after, they advised me to delete the music off my phone & then re-sync it to the computer, run a backup of the phone & redownload the music to the phone. When I tried this it ended up deleting all my playlists (but not my husband's) from iTunes. Irritating, but I've been rebuilding the playlists since. I had also unclicked sync music again & an Apple person told me the most likely best fix was to delete & reload iTunes completely.
A few days ago I realized I hadn't backed up the phone to the computer in over a month so after deleting & reinstalling iTunes, & w/o changing anything (sync music was STILL unchecked) I ran a backup & my phone went from having 4 GB free space to being 2 GB over capacity due to iTunes trying to download the entire music library to the phone. I made a one-to-one appt again & it was suggested AGAIN that I delete all the music off my phone & then resync it to the computer & redownload the music. We did this (though a few random songs that had previously been purchased somehow remained on the phone), I got home, connected the phone & instead of the music that shows as 'on my device' disappearing from iTunes it just sat there, so, as the guy had told me I MIGHT have to do, I threw all those songs showing in iTunes as being on my phone, in the trash so that it was completely clear.
At this point I checked sync music, made sure the options were 'selected playlists only', checked the ones from my own list that I wanted (I usually have one playlist of comedians from my husband's folder that I also have on the phone, but didn't check it at this point). It uploaded all my stuff just fine, but for whatever reason when it saw that I wasn't uploading that comedy playlist any longer, it not only didn't upload it but proceeded to delete my husband's entire folder of playlists from iTunes. -_- I got on the phone w/ an Apple support person right away but he wasn't able to tell me anything .. basically said we'll have to rebuild everything. I asked about the possibility of using time machine, he said he's not qualified to answer that, so that's when I started looking around online & found, among others, the link I referenced a couple replies ago.
I hope this all makes sense. It's been a long-term issue so I'm trying to go from memory as I figured to begin w/ that I had just made a mistake somewhere, so didn't try to document anything. Now w/ it having happened a 2nd time, I'm not sure if it was 'user error' or something else.......

Changing the speed of the ethernet card

Referring to this topic I posted earlier: http://discussions.apple.com/thread.jspa?threadID=568098&tstart=0
I called my ISP, and they could only think of one thing: that there is a conflict between my MacBook's fast ethernet card and my old DSL box (that is capable of only 10 Mb/s).
So, they suggested I try to change the speed of my ethernet card to 10 Mb/s.
The problem is, how do I do it?

I think your ethernet builtin is downgrade compatible, which mean it will run on 10 mbps too without you have to changed the speed.
It is the first time I hear that we should adjust the transfer rate to lower setting.
If your ethernet card max is 10 mbps and you want to use 100 mbps, than you must change the ethernet card or use other external ethernet card, not the other way around.
Good Luck

How can I change the speed of a stepper motor?

HSI bipolar Linear Actuator Size14, HSI Chopper Driver 40105, NI PCI-6052E, NI SC-2345, 2 SCC-DO01 modules, and SCC-FT01
The motor works at one speed with a boolean array input, using the SCC-DO01. But I need to be able to change the speed of the motor. Specifically it needs to operate on several frequencies of functions of as displacement vs. time, such as sine wave, triangle wave, and square wave. I tried to find information about using a digital pulse train but had no luck. Is it even possible to accomplish with this hardware?
Message Edited by Draben on 01-22-2006 09:43 PM

In general E-Series DAQ-boards like the PCI-6052E are not very good for motion control tasks. The 6052E doesn't provide hardware timed digital I/Os so you can control the digital lines only by software. This is both slow and inaccurate as long as you are running the board under a non-deterministic OS like Windows.
On a real-time OS the jitter would be better but still the frequency would be low and it would still be hard to program accurate acceleration and deceleration ramps.
If you use the counter/timer instead of the digital I/Os you could reach higher velocities and a much better timing accuracy but it would be even harder to program acceleration/deceleration ramps which you will need if you want to reach higher velocities with your stepper motor. Additionally for motion control applications you may want features like limit switch monitoring and following error tracking which require again real-time capabilities.
With this said I don't recommend the usage of a multifunction DAQ board as a motion control board. Please have a look at the NI motion control boards like the PCI-7332 which does all the motion I/O and trajectory control onboard.
Best regards,
Jochen Klier
National Instruments Germany

Changing the speed of video playback

Hi Gang,
Just wondering if there is a way to change the speed of video & audio on itunes?
I know this can be done on iPod with the audio book function, just wondering if there's one for videos?
Cheers
Yong-Long

Do you mean by a strobe effect that the brightness of the footage is changing randomly?
Or are you saying that the motion of your footage is not smooth and moves with a sort of rhythm that feels jumpy?
These are 2 different possiblities.
The odds are you are experiencing field reversal caused by changing the frame rate of your footage and thereby switching the field order in the clips. I've posted many explainations of what field reversal is in past topics so search for the term.
You could minimize the effect by using the flicker filter in the footage that is being changed. You could also send the footage to Motion and enable Optical Flow in the Time Mapping properties of the clip. But that's a fairly advanced technique. Try the Flicker Filer first.
Without more info, I can't help you further.

How to change the speed of a slideshow

How to change the speed of a slideshow

In my test, all I need do was right click the clip and make sure Frame Blend was not checked.

Change the speed of keyframed animations over time???

Similar Messages

Maybe you are looking for