Change the sql 2005 database  C drive to E drive

hi,
it is possible to change the sql 2005 database  C drive to E drive
if ,yes then step:-?
Regards
Amit

Hello Amit,
>it is possible to change the sql 2005 database C drive to E drive
>if ,yes then step:-?
You can also check note [363018|http://service.sap.com/sap/support/notes/363018].
Regards,
Eduardo

Similar Messages

  • SAP IDES ECC5.0 (SQL 2005 Database) installation Error at  Database instan.

    At the time IDES ECC 5.0 installation (SQL 2005 database), I was copy all DVD on Hard drive and start setup then at installation of database instance, following Errors are occured. so I cant continue with the installation, if anyone have installation guide/or solve the following error please mail me at [email protected]
    from Log file SAPCLUST
    Interface access functions from dynamic library dbmssslib.dll loaded.myCluster
    (3.5.Imp): 613: error when retrieving table description for physical table AABLG.
    myCluster (3.5.Imp): 614: return code received from nametab is 32
    myCluster (3.5.Imp): 296: error when retrieving physical nametab for table AABLG.
    (CNV) ERROR: code page conversion failed
                 rc = 2
    from sappool.log
    Interface access functions from dynamic library dbmssslib.dll loaded.failed to read short nametab of table ARCH_NUM     (rc=32)conversion failed for row 0 of table  VARKEY = ⁘††††††††††††††††††††††††
    (CNV) ERROR: code page conversion failed
    So please send me solution/ or any configuration need for SQL 2005 / installation guide thanks

    This may be hard disk problem, some file not able to write on HDD.
    Regards
    Rajnish

  • Does changing the SQL Server Service Account impact FILESTREAM data?

    I have a stand-alone SQL Server 2008 instance that I need to change the SQL Server service account from LocalSystem to a domain account.  However, I was wondering if there was any impact on FILESTREAM enabled databases that are hosted on the SQL Server? 
    Specifically, has anyone ever changed the SQL Server service account when using FILESTREAM ...
    Sincerely,
    Sean Fitzgerald

    I have a stand-alone SQL Server 2008 instance that I need to change the SQL Server service account from LocalSystem to a domain account.  However, I was wondering if there was any impact on FILESTREAM enabled databases that are hosted on the SQL Server? 
    Specifically, has anyone ever changed the SQL Server service account when using FILESTREAM ...
    Sincerely,
    Sean Fitzgerald
    BOL says : Only the account under which the SQL Server service account runs is granted NTFS permissions to the FILESTREAM container.So,  if you start SQL Server under different account , that account wil have access to use fliestream data (read / write)
    At the database level ,If a user has permission to the FILESTREAM column in a table, the user can open the associated files..
    Abhay Chaudhary OCP 9i, MCTS/MCITP (SQL Server 2005, 2008, 2005 BI) ms-abhay.blogspot.com/

  • Configure Synchronization Connections An error has occurred while accessing the SQL Server database

    Hi,
    i am getting following error message
    Central Administration --> Synchronization Connections
    An error has occurred while accessing the SQL Server database or the SharePoint Server Search service.
    If this is the first time you have seen this message, try again later. If this problem persists, contact your administrator.
    Central Administration -->  Manage Profile Service: User Profile Service Application --> Manage User Properties
    Error
    An unexpected error has occurred.
    Troubleshoot issues with Microsoft SharePoint Foundation.
    Correlation ID: 3bce5a11-f2dc-4788
    Please tell how to fix it.
    iffi

    Event ID 5555 -> i have change the Timer jobs recycling time AM to PM
    for  User profile page not display  number of count in the page first check services , connection , 
    IISRESET /NOFORCE   /  timer services restart 
    Deepesh Yevle MCTS

  • Clustering the SQL 2005..

    HI Expert!!
    I am in preparation phase to install the MSCS there are some pre-requisites which should be met first,
    Q1
    You have created domain user groups for each clustered service like SQL Server, SQL Agent, Full Text.
    A1
    Yes. I have created in my domain controller,
    Q2
    Ask the domain administrator to create the domain groups with the Group Type Security and Group Scope Domain Local.
    A2
    Yes, I have assigned assigned as mentioned.
    Q3
    l The group names must already exist in the domain before you start the SQL Server 2005 installation.
    A3.
    Yes..Its exist.
    Q4
    l Ask your domain administrator to add the startup account for each service to the respective domain groups.
    A4..my domain controller already running SQL server which being service to in-house dev application, not to sap.
    How will assign the startup account to those service ?...explain me ..please.
    Q5
    l Microsoft recommends that you use for each service a different domain group.
    A5..
    How and explain me.
    Q6
    l Microsoft recommends that you do not share the SQL server domain groups with other applications.
    A6
    how and explain me.
    Q6-b
    You have created the SQL Server database cluster group and added the shared disks for the SQL Sever databases to the group.
    A6-b
    Expert opinion requried
    Q7
    What is the recommend size for the Production Database. ? Is 500Gb is enough ?
    A7..
    waiting your expert answer
    Regards
    Anwer Wseem

    Hi,
    For the manual create the CNO usually cause may issue, you'd better don't use that method.
    The related article:
    Windows 2008/ Windows 2008 R2 CNO Recovery
    http://blogs.technet.com/b/hugofe/archive/2010/03/11/windows-2008-windows-2008-r2-cno-recovery.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • CLEANUP_USESSAUD is locked in MS SQL 2005 database

    Hi team,
    CLEANUP_USESSAUD stored procedure is encrypted bydefault in MS SQL 2005 database.
    May i know, how to unlock and modify this procedure?

    Hi,
    We have used a utility called Optillect to look into the encrypted stored procedures.
    Regards
    Alex

  • JAVA, sqlserver - Need to load an image from the sql server database

    hi,
    I need to load an image from the sql server database using java. I have connected to the database and getting all other records except the records for a photo (datatype = LONGVARBINARY) and Remarks (datatype = LONGVARCHAR).
    I am using java and sql server db. The photo and remarks are stored in the db. and i need to show the image and the remarks fetching them from there.
    I get the error :
    Thread-9 org.hibernate.MappingException: No Dialect mapping for JDBC type: -1
    How can I achieve this?
    Thanks,
    Gargi

    Exactly. And are you using MySQL?
    No. You are using Microsoft SQL server if I have to believe your initial post. A quick google tells me that the dialect class to use is:
    org.hibernate.dialect.SQLServerDialect

  • Fetch the data from the tables in the SQL 2005 server to sap R/3.

    Hi Experts,
    We need to fetch the data from the tables in the SQL 2005 server to sap R/3.
    Please explain which will be the best approach to fetch the same and how to do it. Sample program can greatly help.
    << Please do not offer points >>
    Regards,
    Shobana K
    Edited by: Rob Burbank on Sep 21, 2010 2:36 PM

    Hi,
    Try NATIVE SQL statements in your abap code otherwise you can try to establish jdbc connection from ABAP program.
    search in SDN for samples!
    Suresh

  • Why i cannot create the sql azure database from my own country 'Nepal' ?. why it is not include in the list of country when we sign up for azure database. :( !!!

    why i cannot create the sql azure database from my own country 'Nepal' ?. why it is not include in the list of country when we sign up for azure database. :(  !!!
    canot we try this new feature ,dosnot we need to try this too..why such discermination for our country nepal. :(

    Hi Anil,
    I am Mahesh from Microsoft Innovation Center. From August 2014 we have made Azure Available to Nepal. You can now directly sign in to azure with your Nepal Based Mobile Number as Verification.
    Thanks for showing your Interest in our Product.
    Mahesh Dahal

  • Manual the installation the SQL 2005

    Hi,
    I need a Manual the installation the SQL 2005.
    Regards Víctor.

    Hi Victor,
    Installing NW2004s? Look at this:
    https://websmp106.sap-ag.de/~sapidb/011000358700004073122006E/InstallationGuides_AllDBs.htm#q2
    Best Regards,
    JC Llanes.

  • HT4946 how to change the back up location on windows 7,c drive is almost full

    how to change the back up location on windows 7,c drive is almost full

    This is not a feature of iTunes.
    See this thread for way to "trick" iTunes into backing up to a different location:
    https://discussions.apple.com/message/20590667#20590667

  • OCS 2007 R2 with SQL 2005 database mirroring failover?

    We have OCS 2007 Enterprise Edition installed fine and with the databases mirrored to a backup server/location.  I'm testing our environment for a potential disaster, including losing our primary SQL server (SQL 2005).  I fail the databases over and update the backend pool to the backup SQL server name, but we cannot connect via Office Communicator and I see this error on the OCS server:
    OCS User Services, error category 1006, event id 30962:
    Connection to back-end database succeeded, but failed to execute registration stored procedure on the back-end. This error should not occur under normal operating conditions. Contact product support.
    Back-end Server: databkp Database: rtc Sql native error: 515 Connection string of:
    driver={SQL Native Client};Trusted_Connection=yes;AutoTranslate=no;server=databkp;database=rtc;
    Cause: Possible issues with back-end database.
    Resolution:
    Ensure the back-end is functioning correctly.
    Can anyone shed some light on this SQL 515 error?  Thanks in advance!
    -Erik

    We're having a similar issue but with error number 601. I've tried a million different things aside from restoring the database, which may be next. I tried editing the procedure and I *think* I edited the right lines 77 and 105 for me. Changed:
        delete dbo.DbConfigDateTime
          from @DbTime as t
         where dbo.DbConfigDateTime.Name = t.ValueName
           and t.StoredDbName = N'rtc'
           and t.Value is null
    to:
        delete dbo.DbConfigDateTime
          from @DbTime as t
         where dbo.DbConfigDateTime.Name = t.ValueName
           and t.StoredDbName = N'rtc'
           and t.Value is not null
    and 
        delete rtcdyn.dbo.DbConfigDateTime
        from @DbTime as t
        where rtcdyn.dbo.DbConfigDateTime.Name = t.ValueName
        and t.StoredDbName = N'rtcdyn'
        and t.Value is null
    to:
        delete rtcdyn.dbo.DbConfigDateTime
        from @DbTime as t
        where rtcdyn.dbo.DbConfigDateTime.Name = t.ValueName
        and t.StoredDbName = N'rtcdyn'
        and t.Value is not null
    Not sure if that's where the modification is supposed to go. Any clarity here? Anyone else get a 601 error?

  • Issues connecting to sql 2005 database using Oracle sql developer 1.2

    I just installed the sql developer and was trying to use the quick migrate to try a migration from a sql server to oracle..
    I am getting the following error message when i click on the retrieve database after entering the database credentials
    Status : Failure net.sourceforge.jtds.jdbc.driver
    I am getting another error message when i click on the 'test' button
    Status: Failure - Unable to find driver: net.sourceforge.jtds.jdbc.driver
    I downloaded the jtds driver from source forge and i am wondering what I should do to get the sql developer to make successful connections to sql server.
    Any help is appreciated.
    Thanks

    I have the same issue with both version 1.1.3 of the SQL developer and the latest version(1.2.1). I have added the jar file path in tools->preferences->Database->Third Party etc...
    I got the jar file from this download: jtds-1.2.2-src.zip
    I get this error when trying to connect to an sql server:
    oracle.jdeveloper.cm.CMException: Unable to find driver: net.sourceforge.jtds.jdbc.Driver
         at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.createConnection(RaptorConnectionWrapper.java:175)
         at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.getJdbcConnection(RaptorConnectionWrapper.java:202)
         at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.getPresentation(RaptorConnectionWrapper.java:68)
         at oracle.dbtools.raptor.utils.Connections$ConnectionInfo.createConnection(Connections.java:1004)
         at oracle.dbtools.raptor.utils.Connections$ConnectionInfo$ConnectRunnable.doWork(Connections.java:876)
         at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:159)
         at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:553)
         at java.lang.Thread.run(Thread.java:595)
    Any help would be appreciated. I like the tool would hate to have to abandon it, it works like a charm on our oracle databases.

  • B1 create User Defined Field as nvarchar(max) in SQL 2005 database

    Hi everyone,
    I just created a UDF in B1 as alphanumeric(12), and noticed that B1 created a field in SQL 2005 as nvarchar(max) instead of nvarchar(12). I tested with both 2005A SP01 patch 14 and patch 20. It always creates UDF as nvarchar(max). Is this a bug? It will cause db file use more disk space and also reduce the query performance. Also, B1 won't create the index on the UDF even if you select the option.
    Thanks for help,
    David

    Hi David,
    I was running on patch 19 when I wrote my earlier posts. I'm now running patch 20 without any issues. I also have a range of clients who are running SBO 2005A SP1 on various patch levels above 10 (though not all are on SQL 2005) and I've yet to come across this issue.
    Did you log this with SAP Support? Have they come up with any suggestions?
    Maybe this will work:
    1) Start SBO. When you get to the login screen, click on Choose Company.
    2) Change the Current Server field from SQL 2005 to SQL 2000. Reenter your server settings if prompted
    3) Login as normal and try and create your field.
    4) Log out and go back in to change back to SQL 2005
    Kind Regards,
    Owen

  • SQL 2005 Databases not Discovered

    We have a SQL 2005 server, where the DB instance itself has been discovered but the SQL DBs themselves have not. Any way to understand / troubleshoot why not. Other instances work just fine.

    The account is just fine, and it is a sysadmin on the server. It discovered the instance even, unlike by my other post:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/7da4b442-c9e4-4aac-9cb9-d2af0b1ffbaa/clustered-database-engine-not-discovered?forum=operationsmanagermgmtpacks&prof=required
    That said, it doesn't discover DBs. I haven't seen any errors in the event log pertaining to the discovery. The bug fix posted above also hasn't helped me.
    When trying to run this MP script manually it also returns XML:
    http://blogs.technet.com/b/jimmyharper/archive/2009/06/11/sql-database-properties-not-discovered.aspx
    So, I'm not really sure that is going on here. What is the expected return I am supposed to get.

Maybe you are looking for