Change the starting timecode

Hi,
I don't understand why and when I need to change the starting timecode? what is the reason for this?
can someone explain to me?
thx

Because some broadcasters may require additional information before program start such as color bars, a slate, a countdown or a certain amount of black. You'd set the timecode start earlier to account for these elements. That's why program start is 01:00:00;00 instead of 00:00:00;00. Broadcasters often have specifications dictating exactly what should be shown at certain timecodes before the program starts.
Also, in Europe program start is often 10:00:00:00 so it allows you to change it to meet European broadcast specs.

Similar Messages

  • Is there a way to change the project timecode in FCPX?

    Is there a way to change the project timecode in FCPX?  So that my sequence can start at 01:00:00:00 or am I stuck
    with it starting at 0?

    I guess you could, but that would be an hour long gap clip before your sequence which would make for a very
    unweildy sequence.  Especially since this cut will be only about a minute.

  • How do i change the start up page i have changed in tools but returns to the unwanted page at startup

    i changed the start up page in tools / options and when i restart Firefox it returns to the unwanted page
    i installed bit comet and winxdvd programs i was browsing some other sites at the time so i am not sure if those programs were the problem or not

    See http://kb.mozillazine.org/Preferences_not_saved

  • Need a script to change the start time of meetings set by someone else...

    Hello,
    I have a series of events that someone else created and the start time is off by 1 hour in my timezone. Is there a script available to run and change these times or do I have to delete them and manually create them myself?

    What I ended up doing John is just simply deleting the original events from iCal then I went in to Outlook and manually changed the start/stop times of each event then went into the IMAP Calendar folder, clicked on that event and added it to my iCal. Thats sort of the process I use for getting my events to from Exchange to iCal anyway (can't wait for Snow Leopard) but that did the trick for me for these few items that were off. Fortunately I don't expect any changes from the author.
    Thanks for responding!
    JimN

  • How do you change the start-up screen

    Hi, as my nick states, I'm new here. I'm new to Nokia too and I got an 2760 (I know not the latest model) as gift. Since the battery from my old phone is almost ruined, I'm using it. What baffles me - in the manual I can't find how to change the start-up screen (Nokia) or better, how to block it. This was possible with my old one, but with this one?
    To make matters even more complex - it used to be a T-Mobile model (I'm no T-Mobile subscriber) and the menu differs even from the (very short) manual...
    I'm lost - can anybody help?
    Thanks!!
    Solved!
    Go to Solution.

    this cant be disabled ,check out the web for latest user guide
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • How do I change the start date for the week from Monday to Sunday on my iPhone 5?

    How do I change the start date for the week on iCal from Monday to Sunday on my iPhone5?

    Yes. On my new iPhone 5 the iCal week begins on a Monday not a Sunday and does not give me the option to edit in settings on the phone

  • How do I change the start up language from French to English??

    How do I change the start up language on a new Apple TV2?

    My problem was everything was in French and I don't speak/read French so I couldn't even get the country setting or internet password to work.  A very helpful technician called me and walked me thru it and now it seems to be working.  Thank you.

  • Org Management - How can I change the start date of all the org units

    How can I change the start date of all the org unit objects and its relationships at one shot ?  I have created some 100 Org units with the wrong start date. Please suggest.
    Thanks in advance..
    Cheers
    Vijay

    Hello Archana,
    Thanks a lot... This has solved my issue...
    Cheers
    Vijay

  • In Work flow Iam enable to change the start event which I gave .

    In Workflow Iam enable to change the start event .The message is 'not modifiable'.

    Hi,
    1. If you are in QA or PRD system or rather in test client of development system, you will not be able to chage the event linkage as for these systems, client status is maintained as non-modifiable.
    2. second reason may be you are trying to change the event linkage when you are in diaply mode of transaction rather than chage mode !
    Hope this helps.
    Regds,
    Akshay

  • Change the start time of track 1

    Hi, fairly new with waveburner but spent about 2 hours going through all the windows so i've got a good idea about the layout and where everything is.
    Goal - to remove the 4 second silence at the beginning of the cd. There is a 2 second pause, and 2 seconds before the audio kicks in.
    I recorded a dj mix and imported from logic into waveform. I made my track edits, titled all my tracks, added my efx and automation adjustments and just burned my master cd. After further review there is a 5 second delay before the first track.
    I zoom into the timeline and it appears the audio sample is located and starts at 4 seconds. There is by default a 2 second pause for the first track. I have tried to change the start time on track 1, move the entire sample, and create a new track on the 5 second marker and delete the first track but i can't move get the first track to start at the 4 second point.
    Here is a screenshot - http://kennygrant.ca/wp-content/uploads/2010/01/kenny-screenshot.gif
    totally frustrated as the file i bounced did not have a 4 seconds of silence, so i'm totally confused.

    What I ended up doing John is just simply deleting the original events from iCal then I went in to Outlook and manually changed the start/stop times of each event then went into the IMAP Calendar folder, clicked on that event and added it to my iCal. Thats sort of the process I use for getting my events to from Exchange to iCal anyway (can't wait for Snow Leopard) but that did the trick for me for these few items that were off. Fortunately I don't expect any changes from the author.
    Thanks for responding!
    JimN

  • When starting my mac air a lot os utilities opens, I would like to change the start up, how?

    when starting my mac air a lot os utilities opens, I would like to change the start up, how?

    System Preferences - Users and Groups - Login Items - remove any that you don't want on startup.
    Don't forget also that Lion will automatically restart any apps you had open when you shut down, unless you untick the "Reopen windows when logging back in" tickbox that appears.
    Matt

  • I am trying to create a ringtone, when I right click and and go to get info I can't open anything under options. Itunes is not allowing me to do anything under options including changing the start and stop times. ??

    I am trying to create a ringtone, when I right click and and go to get info I can't open anything under options. Itunes is not allowing me to do anything under options including changing the start and stop times. ??

    GarageBand '11 - Create an iPhone ringtone - Apple Support

  • Can we change the start conditions of SAP standard workflows

    Can we change the start conditions of SAP standard WF10400002
    Where i want to assign my own Gross amount in the start conditions.

    Check out the link below.
    [http://help.sap.com/saphelp_nw2004s/helpdata/en/90/83ed38f5f41a28e10000000a114084/content.htm]
    [http://help.sap.com/saphelp_nw2004s/helpdata/EN/4c/86bf43feca11d2a64f0060087a79ea/content.htm]
    Regards,
    Raj

  • How can I change the start day of the week for weekly view?

    How can I change the start day of the week for weekly view?
    <P>
    This function is configured in the code in file <loadpoint>/CalendarServer/cal/uicust/en/main.html:
    <P>
    i18n['def first day'] = '1';
    <P>
    Note: 0 is Sunday, 1 is Monday, etc.

    Click system perferences below ur screen then click language&text and you just select ur peference langauge

  • Why does my LG Cosmos 2 calendar change the start time to the same as the end time?

    This does not happen all the time but often enough to be a pain.  When I enter a new appointment in the calendar sometimes the phone changes the start time to what I entered as the end time.  I thought maybe it was me but it happened twice today and I watched carefully to make sure I was entering it correctly.  I was and it is the phone making the change.  How do I fix this?

    Hi AyaniB
    It's been doing it for some time. It seems to be random in occurrence. The day I made the post it happened three times. Since then I have been watching carefully and it does not seem to have happened again. Am I missing any phone updates or anything? How do I check that?
    Thanks for your help.
    Dave Zamzow

Maybe you are looking for