Change the status of inspection Lot from 'Created' to 'Released'.

Hi,
I am having the below scenario.
We have QM active in our plant. In the material master records we assign two inspection types '01' - Goods receipt insp. for purchase order &  '08'- Stock transfer inspection. I didn't make any inspection plan (QP01).
We make a Purchase order ( say Qty=10)with excisable tax code. While doing GR (MIGO) for the purchase order, we capture and post Excise Invoice. Later, Usage Decision is done using QA11(7 qty to unrestricted stock type & 3 Qty to Blocked Stock). Later, i want to send the blocked stock to the vendor, I am transferrring the material from Blocked stock to QI stock type using MT349. But, system is showing the below warning message : 'Preparation for the quality inspection could not be comleted. -Message no. QA187'.
Please let me know how we can change the status of the inspection lot from 'Created' to 'Released' so that I can proceed further making the Return delivery to vendor using T.Code: MIGO.
Thanx in advance.
Regards,
Phani

Hi
Check the Usage of the Task list.
Check the date of creation of task list must be prior to creation of lot.
  Go to QA02
Inspection specification > Assign task list by click on Task/ specification
Go to Sample, do the SAmple calculation
Save
Check whether lot status is Rel
Regards
Sujit

Similar Messages

  • Change the status of Excise invoice from deleted

    Hi,
    In the transaction J1IEX, we have canceled one excise invoice by mistake.
    This Excise invoice was actually meant to be posted.
    What can be done now to post the excise invoice now in the system?
    Please help.......
    Regards,

    Thanks Kunal.
    Now what can be done?
    Should we cancel the material document (Goods receipt document)?
    Regards,

  • Change the status of WBS from REL to CLSD.

    How do I change the status of WBS element from REL to CLSD manually in the transaction CJ02.
    The top level WBS element is in REL state so whenever I create a new WBS it is automatically set to REL state.
    Please tell me how do I change the status to CLSD manually as this field is disabled for editing.

    Hi Abhishek,
    I presume that this may be the information massage. It is because you may be having your project end date (Actual finish) later in the year 2008 and you are trying to close the project before specified date of finish.
    Thanks
    Hemant

  • Bapi / Function module to change the status of transaction crmd_order

    Hello team,
    I am developing the utility in CHARM for which i need to change the
    Status of transaction CRMD_ORDER from "New to "In process" through
    report/BAPI / FM etc... I tried to use report
    CRM_socm_service_report.But it never puts status " In process" rather i
    updates only " "work in progress ".
    Also tried FM "CRM_STATUS_CHANGE_EXTERN" , but doen't work.
    After the process is put "In process" , i want to create change request
    and assign resource". Is there any report / FM /Bapi or anything in the
    system to do this.
    I tried to write BDC but dropdown list is not recorded in the recording.
    Please advice.
    Thanks and regards,
    Swapnil

    Not sure I understand your requirement but maybe FM CRM_ORDER_MAINTAIN will be of help to you.

  • Unable to change the status of Internal order.......

    Hi,
        I am trying to change the status of Internal order from Technically completed to Release. But i am getting an error that ---Status REL is not allowed (order 4564564).
    We have created this order and till now zero value is used of actual budget means we not used even single amount till now for this order and we want to change the status of order from Tech to REL again.
    Is it possible.
    Please suggest.
    Regards,
    R.

    Hello,
    You can release the Order by the following method:
    Go to KO02
    Enter the Internal Order name
    Go to Control Data Tab
    There we have one screen area as Status: there we have one push button(like); click it and from there you can set the staus of the internal order to Released(or you can also change the current status of the internal order)
    Please let me know if you I am missing something in my reply.
    Thanks,
    Anurag Singh Rathore

  • How to change the Status CRTD of the Inspection Lot?

    Dear all.
    I want to Complete an Inspection Lot 10000000005 In the T-CODE qvm2.When I select the Inspection Lot 10000000005 and press F8 to Complete the Inspection,the SAP show an error message "Status check error".
    And the detail info show that the error was cause by the Status CRTD of the Inspection Lot.I check the Status of the Inspection Lot 10000000005 and found that it's Status was CRTD CHCR SPRQ.My question was how to change the Status CRTD of the Inspection Lot?
    Regard
    Yoda

    Hi
    CRTD means ...
    In material master QM vew-inspection setup->Inspect with task list tick is there.
    Now to change status,
    Go to Qp01>create a task list for material(If not exists)>remember date of creation of task list must be prior to date to creation of inspec lot
    If task list is created/exists>go to QA02.<inspection specification -->click on Inspec Spec
    and attach task list
    go to sample tab....click on sample.
    Now save it.
    Status will change to REL
    Regards
    Sujit

  • How to disable other users from changing the status

    Hi,
    The status entry field can be changed irrespective of ownership in Documents.
    I was able to change the status on the document created by other user.
    Example: The status of document was In-Work. The document owner was X. But I was able to change it to Inspection Check.
    How to disable other users from changing the status?
    Regards,
    Shashi

    This is a frequently discussed topic.Please use the search feature.It has been discussed in [previous posts|CV01N: Filter documents by role; in various contexts.
    Regards,
    Pradeepkumar Haragoldavar

  • Sharepoint Designer - Two step List Workflow task item is not changing the status from not started to Complete

    Hi 
    Using SPD i am creating list workflow.
    Scenario: Employee submits a request . Task assign to manager. Manager can either approve/ reject. If approve then change the state column to "done". If rejected the state column to "Rejected".
    Problem is "Assign a to do item" is assigning the task to manager. But after manager approves the status in the task list not changed to "Completed". Still it is showing "Not started". I dont want to manually complete the task.
    Please help me for automatic process. 
    What i should do to change the status to "Complete" automatically after manager approval
    Regards
    Jhanani
    Janani.R

    Hi Janani,
    From your description, you would like to create an approval workflow for a list. When an employee submit a request to the list, an approval task should be assigned to manager, then manager could approve or reject the request. From the request list,
    we should be able to see the Approval task’s status.
    Not understand the reason of designing the workflow to two steps, an approval action should be enough from my understanding. For producing, I create a list named Request list, then customize it in InfoPath form to add a Request field for stating request
    content. Then add a workflow to list named Approval task, add the action of Start an approval process with administrator and make the workflow automatically start when item is added.
    The image below shows the status of Adding items, Approving and Rejecting. Please check if it could meet your requirement.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • How can I change the status of the fileupload UI from disable to enable?

    Hi, experts,
    The Version of my Netweaver studio is 7.0.11.
    I create a view with fileupload UI element in WebDynpro for Java application, but the fileupload UI element is disabled so that I don't select file when I click the button in the fileupload UI element after I run the application.
    How can I change the status of the fileupload UI element from disable to enable?
    Best regards,
    tao

    Hi
    look at this thread [HI Masters , I need information for file upload program in web dynpro java|HI Masters , I need information for file upload program in web dynpro java]
    and check if u bind each file upload element to binary property in the context

  • HT5787 My apple id has been hacked. hacker has changed all information in the apple id so I can not change the password. Account information from the apple id created is still in my mail. How do I regain apple id. Thanks

    My apple id has been hacked. hacker has changed all information in the apple id so I can not change the password. Account information from the apple id created is still in my mail. How do I regain apple id. Thanks

    Contact Apple support: Apple ID: Contacting Apple for help with Apple ID account security

  • Is it possible to change the status from Bid Rejected to Bid submitted?

    Hi there.
    We are working in SRM 4.0.
    One user rejected a bid, but it was a mistake. Is it possible to change the status from Bid Rejected to Bid submitted?
    We would like to modify the status from Bid Rejected to Bid submitted or Awaiting Approval to Bid submitted in order to solve errors.
    Thanks and regards.
    Raúl Moncada.

    Hi ,
    Use Function Module : BBP_PD_BID_STATUS_CHANGE
    Supply Activity = 'QOSU' .
    Regards,
    Sachin S M

  • How to change the status of IDOCS from 29 status to 53

    Guys
    how to change the status of IDOCS from 29 status to 53
    Thanks in advance

    Hi Krishna
    IDOC_STATUS_CONVERT Use this FM and reward me

  • How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

    HI,
    How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

    Thanks Florin,
    Your piece of code has worked alot, and it was very helpful in changing the Status of the Workitem to "READY" for all the Users fo the workitem.
    Points have been rewarded for your help.
    Process: We have acheived this using the "Work Item Exits", Usng "AFTER_EXECUTION" Method.
    Note: The Exit will be executed if "exit_cancelled"  statement is present/used in the work item method. if not it is not taking to the exit code. I'm unable to find the reason for it. Florin can u please explain this point.
    Please check the link for adding the code in Work Item Exits.
    http://wiki.sdn.sap.com/wiki/display/ABAP/ProgramExitsIn+Workflow
    Please find the Code:
    method IF_SWF_IFS_WORKITEM_EXIT~EVENT_RAISED.
    Get the context of the workitem
      me->wi_context = im_workitem_context.
    After execution of the workitem call the method AFTER_EXECUTION
      if im_event_name eq swrco_event_after_execution.
        me->after_execution( ).
      endif.
    endmethod.
    METHOD AFTER_EXECUTION.
    This method acts as the Event Handler for SWRCO_EVENT_AFTER_EXECUTION
      DATA: LCL_L_WID TYPE SWW_WIID,
            L_STATUS TYPE SWR_WISTAT-STATUS,
            L_NEW_STATUS  TYPE SWR_WISTAT,
            L_SWR_MESSAG  TYPE STANDARD TABLE OF SWR_MESSAG,
            L_SWR_MSTRUC  TYPE STANDARD TABLE OF SWR_MSTRUC.
    Get work item
      CALL METHOD WI_CONTEXT->GET_WORKITEM_ID
        RECEIVING
          RE_WORKITEM = LCL_L_WID.
      L_STATUS = 'READY'.
      CALL FUNCTION 'SAP_WAPI_SET_WORKITEM_STATUS'
        EXPORTING
          WORKITEM_ID    = LCL_L_WID
          STATUS         = L_STATUS
          USER           = SY-UNAME
          LANGUAGE       = SY-LANGU
          DO_COMMIT      = 'X'
        IMPORTING
          NEW_STATUS     = L_NEW_STATUS
         RETURN_CODE    = SY-SUBRC
        TABLES
          MESSAGE_LINES  = L_SWR_MESSAG
          MESSAGE_STRUCT = L_SWR_MSTRUC.
      IF SY-SUBRC EQ 0.
      ENDIF.
    ENDMETHOD.
    Thank You Once Again,
    Ajay Kumar Chippa

  • Change the status profile assigned to the line item from PROFA TO PROFB

    Hi Experts,
    The issue we are having relates more to the fact that the code we have written is changing the item category, however the status profile has already been retrieved from configuration based on the original item category and therefore the status selection that we are getting is incorrect.
    Item Category A -> Status Profile PROFA
    Item Category B -> Status Profile PROFB
    For example we have a line item and item category A is determined through config, this then retrieves its associated status profile PROFA. However we have then coded the system to change item category A to item category B.  However the status profile still remains PROFA.
    We need to find a way to change the status profile assigned to the line item from PROFA to PROFB.
    any quick inputs from any one please......
    Thanks in advance
    hemanth

    Hi
    There is perform which moves the values to VBAP field.
    This PRCTR field is stored in VBAP (i.e., SO line item table)
    USEREXIT_MOVE_FIELD_TO_VBAP
    Hope it works.
    VVR

  • What is the BAPI for Inspection lot change - QA02??

    Hi Guys,
    Can anyone tell me plese, What is the BAPI for Inspection lot change - QA02?
    Thanks

    Hello,
    This BAPI suppose to be able to do that for you:
    BAPI_INSPLOT_SETUSAGEDECISION
    Best regards,
    Marcin

Maybe you are looking for