Change the storage server of archiving files

Hello Gurus,
I have archiving files in iseries storage, but because the disks in iseries servers is very expensive i want to change the storage server to Intel server with Win2003 or Linux S.O.
This change is posibble? i would appreciate your suggestions.
Regards,
Ernesto Castro.

Hi,
With my understanding about accessing the archive data from the storage system, i can say that it is possible.
1. First you should check with archive server vendors (such as opentext or Documentum) whether their application will support in this scenario.
2. When you are relocating the archived data from one storage to another storage system then the link between the archived data and the physical path will be disconnected.
Solution: A. create a content repository of new location and assign this content repository to all the archiving objects that are affected.
B. Delete the build Infostructure for the archiving objects and after assigning the new content repository build the infostructure again and try to access the archived data.
Hope this mail could help you.
-Thanks,
Ajay

Similar Messages

How to change the storage location in Lightroom 3.6.?

How to change the storage location in Lightroom 3.6.?
I use my internal hard drive NTFS of my MacBook Pro as my storage location of Lightroom 3.6. being installed in Snow Leopard now but the data of my photos get too big now. I have two fast and big external hard drives eSATA now which I want to use for my data/photos. I know how to copy the data from one hard drive to another but I don't know how to change the settings in connection with Lightroom easily. I still want to watch all fotos on my MacBook Pro but don't want to save any fotos on my internal harddrive any more. Isn't it possible to have the programm Lightroom on my internal harddrive but the data on two times on two different extermal hard drives? If I look at Lightroom - settings of catalogue - I see that the internal harddrive location is my storage location now but I my two external harddrives don't appear as folders. Why? How to change that so that the external hard drives appear in Lightroom and I can watch all my fotos immediately (sometimes using external hard drive 1 and sometimes using external hard drive 2)?
My external hard drives are in HFS+ but I use the software of Paragon so that there shouldn't be any problem to read and write the data (I use also Final Cut Express so my external hard drives are HFS+ and not NTFS).
I want to impert many data from CDs - should I copy the fotos first to my external hard drive and then import it into Lightroom or is it easier to import the data directly from the CD in Lightroom so that I don't have to name the folders two times?
I see that I have to sort the fotos from the CDs in new different folders and an used to do that in Finder of my MacBookPro. In Lightroom I don't want have to click each of hundreds of fotos to be able to put it into the right folders ... But how to import only a part of a CDs quickly into the right (newly created) folders?
Kind regards, Karin

Would you really leave the names of photos like DSC05271.ARW and DSC05271.jpeg etc.?
What if I name them f.i. like ...
2013-09-11_Austria_1_mountain.jpeg
2013-09-11_Austria_2_mountain.jpeg
2013-09-11_Austria_3_valley.jpeg
I would NOT do this. I would not change the file name.
I would add keywords and other metadata to the photos to identify the content of the photos, and from that point on, I would use keywords and other metdata to search for these photos.
However, let's look at the big picture. I think there are three different methods of organizing
Organize via keywords and other metadata, and not via operating system constructs such as file name and folder name
Organize via operating system constructs such as file name and folder name, and not via keywords and other metadata
Some combination of 1 and 2
You can choose any one of the three methods above, the choice is yours. I am a very strong believer that for most people (and it sounds like you are one of those people), method 1 is the best method. However, not everyone agrees.
There are drawbacks to using file names to identify your photos. One big drawback is that you must type the information into each photo's name, and this is more tedious than if you wanted to assign the keyword "mountain" to the photos, you can assign the keyword to multiple photos at once. Also, if you mis-spell the information in the file name on any photo, you have just made the photo much harder to find; whereas in Lightroom, the keyword can be assigned via a mouse click (so you can't mis-spell it), or by typing the first few letters and Lightroom (auto-fill) will find the correct keyword name. So using keywords is a much simpler way to go.
.. is this much too complicated to do that in Lightroom or even dangerous to got lost of photos?
It is very simple to add keywords, as I explained for this case. Create keywords "Austria", "Mountain", "Valley"; then select the desired photos, and then click on the check box next to the keyword name. It is much more complicated in my opinion to rename the photos in this manner.
There is less danger in doing this via keywords than the danger doing this via file names, because of potential mis-spellings.
If I spend a lot of time in editing photos (in Lightroom or Photoshop) I don't want that I loose those photos f.i. later if Lightroom won't be the software I use regarding the photos (in 10, 20 years?!)
Lightroom will OPTIONALLY write your keywords and other metadata to the files (or sidecar files in the case of RAW). Every photographic application I know of (and I'm sure those in the future) can read the keywords and other metadata. So if you ever want to switch to some other software, your keywords and other metadata are available. you can turn this option on via Edit->Catalog Settings->Metadata, check Automatically Write Changes to XMP.
So I have to create two folders - one with the originals and one with the edited exported photos?
No, you do not have to create two folders. You don't have to export everything, but if you do, you can put the exports wherever you want, including putting them in the same folder as the originals, with different name.
Why not edit them in Photoshop and save them in the second folder which I import later in Lightroom? Because it takes longer?
Wow, you really need to think about: Why are you using Lightroom?
Could you explain this to me? Why are you using Lightroom?
If your goal is to edit the photos in Photoshop, and then put them in folders with whatever custom name you want to give them, then what is the benefit of using Lightroom? You can do all of this WITHOUT Lightroom. You keep explaining that your intended goal is to use Photoshop and folders/file names, and this is a goal which AVOIDs all benefits of Lightroom. I can't understand what you think the benefits of using Lightroom are for you.
It is starting to sound to me like Lightroom is not the right software for you.
Some people want to see a movie on their TV and are able to watch a DVD (not all!). Flickr seems to be a solution for movies in a big size (many GBs) to share them with friends (?)
You haven't mentioned this before, and you should check the rules on Flickr regarding how long a video you can upload.

Proper way to make bulk changes the Owner ID, Path and file share credentials for my existing subscriptions, ExtensionSettings

We are going through with an upgrade/migration to SSRS 2012 and moving everything to a different domain. We have about 200 active subscriptions running, the reports are being delivered to a file share. What is the correct way, in bulk, to change
the OwnerId, the Path and the FileShare Username password credentials for these subscriptions? I see these values are being stored in Subscriptions > ExtensionSettings. I see that the file share path and Owner wouldn't be a problem to change,
but since I see the file share credentials are encrypted I would not be able change them directly in ExtensionSettings. Anyone know the proper way to change the Owner ID, Path and file share credentials for my existing subscriptions without having to
change each one of them manually in the report manager?
Note: Reporting Services Native upgrade from SSRS 2005 to SSRS 2012.
Thanks in advance.

Hi Cygnus46,
Based on my understanding, you want to change the Owner ID, Path and file share credentials for all existing subscriptions.
In Reporting Services, the subscription information are stored in the Report Server database. In your scenario, you can go to report server database and run the query to list all the subscriptions, then modify the owner and fileshare paths in the subscriptions
table. For more information, please refer to this article: Tip: Change the Owner of SQL Reporting Services Subscription. If you want to change
the file share credentials for subscriptions, you can run the query provided by
wiperzeus from this similar thread:
Windows File Share Delivery/ SSRS 2008 R2.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Does changing the SQL Server Service Account impact FILESTREAM data?

I have a stand-alone SQL Server 2008 instance that I need to change the SQL Server service account from LocalSystem to a domain account. However, I was wondering if there was any impact on FILESTREAM enabled databases that are hosted on the SQL Server?
Specifically, has anyone ever changed the SQL Server service account when using FILESTREAM ...
Sincerely,
Sean Fitzgerald

I have a stand-alone SQL Server 2008 instance that I need to change the SQL Server service account from LocalSystem to a domain account. However, I was wondering if there was any impact on FILESTREAM enabled databases that are hosted on the SQL Server?
Specifically, has anyone ever changed the SQL Server service account when using FILESTREAM ...
Sincerely,
Sean Fitzgerald
BOL says : Only the account under which the SQL Server service account runs is granted NTFS permissions to the FILESTREAM container.So, if you start SQL Server under different account , that account wil have access to use fliestream data (read / write)
At the database level ,If a user has permission to the FILESTREAM column in a table, the user can open the associated files..
Abhay Chaudhary OCP 9i, MCTS/MCITP (SQL Server 2005, 2008, 2005 BI) ms-abhay.blogspot.com/

How to change the web server??

How to change the web server in the details of the mobile application component in the MI webconsole??

hello irene,
had your tried checking on the "Use IP instead of host
name" checkbox?
to edit your registered application info, go to
"Upload Mobile Component" tab and click on the Edit icon
on the left part of the record list which corresponds to
the application you had just uploaded.
your application is uploaded to the same host as your
web console application is running on. if you like to
point it to a different server where you have your
archive accessible, you have to change your mcd
deployment attributes on your middleware. try the ff:
1)run tcode: mi_mcd
2)click on Create Mobile Component
3)Enter Mobile Solution Name and Version
4)Click on Display MCD
5)Select Deployment Tab
6)Click on Edit
7)Change the values of WEBSERVER and WEBPATH location eg.
if your archive is located at
http://myotherserver:80/archive/myapplication.war
your entry will be:
WEBSERVER: http://myotherserver:80
WEBPATH: /archive/myapplication.war
where you myotherserver is the name of your http host
server and myapplication.war is the name of your archive.
the archive directory is just a virtual directory where
your application archive is.
you might need to change the port number depending on
your http server port.
regards
jo

Change the Exchange server name in outlook

Hello All,
Configured two Exchange server 2010. Both server have Mailbox, CAS and HUB installed. All the user use outlook (Exchange Client). All outlook configured with exchange server host name not mapi name. Now i need to change the exchange server name in outlook.
Is there any procedure to change the Exchange server name for outlook automatically. Please suggest.
Thanks

Hi,
Let’s begin with the partition named when RPC endpoint Changes in the following article:
http://blogs.technet.com/b/aljackie/archive/2013/11/14/outlook-rpc-end-point-and-pf-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and-restart-outlook.aspx
“To add further on the cas array, the Outlook clients with an existing Outlook profile would continue to use the old RPC endpoint rather than the new RPC endpoint (even though Autodiscover detected the change). This is because the old RPC endpoint does not
return an ecWrongServer response to the client. The RPC endpoint accepts the connection; therefore, Outlook ignores the Autodiscover response because it has a working connection.”
In this case, except with recreating a profile, we can move mailboxes to force the Outlook client to do a profile discovery and update the profile based on new information.
For more information about moving mailboxes, please refer to the following article:
http://technet.microsoft.com/en-us/library/bb124495(v=exchg.141).aspx
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Collaboration Server - changing the SMTP server info

We have installed the collab server. However the SMTP server info specified during the install, was incorrect. I need to change the SMTP server name. Is this configurable through any config file setting or do I need to re-install collab erver.
Any help on this would be appreciated.
Thanks.
Vanita

Vanita -
What version of Collab are you using? The SMTP notification settings are all accessible without re-installing. I am looking at a 3.0 Collab install and the settings are all in the plumtree\ptnotification\3.0\settings\config\config.xml file.
Hope this helps.
-- Jeff Chastain

Changing the order for printing portfolio files in adobe acrobat 9 pro

Does anyone know how to change the order for printing pdf files that are part of a portfolio in adobe acrobat 9 pro? The documentation seems to say that it prints files alphabetically by filename rather than by the internal sort order. This won't work for me. Any ideas? Thanks.

Question1: No.
Question2: No.

Can i change the storage device for a user on my macbook pro

That basically says it all

It means i want to change the storage device on the computer. I have the drive on the macbook, the one built into it, and i have an external drive. I want to know how i can make the external drive my main source for storage. And if its possible i want it to be for a specific user on the computer

How do I change the "trash" icon to "archive" icon in email on my iPhone using iOS7?

How do I change the "Trash" icon to "Archive" icon as the default setting in email using iPhone iOS7?

That is very much dependent on your Email account.
Go to Settings->Mail,Contacts,Calendars->Accounts->Your Account->Account->Advanced->Move Discarded Messages Into.
Choose Archive Mailbox.
It may not be there if its not supported by your email provider.

Is there a way to change the image numbers in a file in Aperture?

Is there a way to change the image numbers in a file in Aperture? We shoot with two photographers and so the img numbers are not in order but I would like to have the photos in chronological order on the disc when I give it to them. Does anyone know how to do this? I have them all in order ready to go in Aperture but when I move them to the disc to be burned they default back to the img number order. Thanks for your help!

What do you mean by "image number"? The file names like "IMG_7822.CR2" or "IMG_7822.jpg"?
You can create custom names with appended numbers, when you export your image files to be saved on a disk.
Sort your images by date in the browser, select them, then use the command "File > Export > Version" to write the files to the disk. Set the name format to "Custem Name with Index" or "Custom Name with Counter" to create numbered names in your current sort order.
Regards
Léonie

How do I change the name property of a file in a document library?

I am trying to come up with an Event Receiver that will change the name property of an file when it is uploaded. For instance when a file is uploaded into a document Library, currently the Title is being generated (which is fine)...I want to be able to
change the "Name" property from whatever it is, to match exactly what is in the "Title" property. Are there any sample codes/blogs out there that I can take a look at? Has anyone had any experience doing this? It seems like something
that should be straight forward, to change the "Name" property to match what is in the "Tilte" property.

Hi,
You can try the code below which use the SPFile.MoveTo() function to change the name of the file.
EventFiringEnabled = false;
SPFile f = properties.ListItem.File;
string spfileExt = new FileInfo(f.Name).Extension;
f.MoveTo(properties.ListItem.ParentList.RootFolder.Url +
"/" + properties.ListItem["Title"]+ "_new" + spfileExt);
f.Update();
EventFiringEnabled = true;
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5cafb8e4-bb85-4147-9bda-4ab42a4d4817/sharepoint-2013-event-receiver-to-rename-files-not-working?forum=sharepointdevelopment
A link about rename uploaded file using Event Receiver for your reference:
http://paulgalvinsoldblog.wordpress.com/2008/01/25/quick-easy-rename-uploaded-file-using-sharepoint-object-model-via-an-event-receiver/
Best regards
Patrick Liang
TechNet Community Support

How do you change the name of a folder/file on an expansion drive

How do you change the name of a folder/file on an expansion drive or external hard drive?

The same way you change it on the internal drive; click on the name and wait a second or two for the field to drop into editing mode, then just type the new name. Or Get Info on the file/folder and change the name there.
Regards.

Change the name of an image file in Photos app

Just wondering how you change the name of an image file in the new 2015 Photos app?

The only way to change the filename of an image is to export the image with a new filename: When exporting you can select the title a s a new filename.
Then reimport the renamed file to Photos and delete the original version.

[svn] 3638: Changing the build order of swc file update with dita xml files .

Revision: 3638
Author: [email protected]
Date: 2008-10-14 16:49:56 -0700 (Tue, 14 Oct 2008)
Log Message:
Changing the build order of swc file update with dita xml files.
By default this would now happen during the checkintests target - so "ant clean main" shouldn't get affected.
To opt out use -Dno.doc=true
QA: No
Doc: No
Tests: checkintests
Modified Paths:
flex/sdk/trunk/build.xml
flex/sdk/trunk/frameworks/build.xml
flex/sdk/trunk/frameworks/projects/airframework/build.xml
flex/sdk/trunk/frameworks/projects/flash-integration/build.xml
flex/sdk/trunk/frameworks/projects/flex/build.xml
flex/sdk/trunk/frameworks/projects/flex4/build.xml
flex/sdk/trunk/frameworks/projects/framework/build.xml
flex/sdk/trunk/frameworks/projects/haloclassic/build.xml
flex/sdk/trunk/frameworks/projects/rpc/build.xml
flex/sdk/trunk/frameworks/projects/utilities/build.xml

Revision: 3638
Author: [email protected]
Date: 2008-10-14 16:49:56 -0700 (Tue, 14 Oct 2008)
Log Message:
Changing the build order of swc file update with dita xml files.
By default this would now happen during the checkintests target - so "ant clean main" shouldn't get affected.
To opt out use -Dno.doc=true
QA: No
Doc: No
Tests: checkintests
Modified Paths:
flex/sdk/trunk/build.xml
flex/sdk/trunk/frameworks/build.xml
flex/sdk/trunk/frameworks/projects/airframework/build.xml
flex/sdk/trunk/frameworks/projects/flash-integration/build.xml
flex/sdk/trunk/frameworks/projects/flex/build.xml
flex/sdk/trunk/frameworks/projects/flex4/build.xml
flex/sdk/trunk/frameworks/projects/framework/build.xml
flex/sdk/trunk/frameworks/projects/haloclassic/build.xml
flex/sdk/trunk/frameworks/projects/rpc/build.xml
flex/sdk/trunk/frameworks/projects/utilities/build.xml

Change the storage server of archiving files

Similar Messages

Maybe you are looking for