Change the system date

Hi guys,
I have an infoObject with attribute navigation fields date_to, date_from.
This infoObject has a master data table time dependence with these fields
Operacion, Date_to, Date_from.
when I load the information in an chain process the result is
operacion = 0045, date_to = 20.02.2007, date_from = 01.01.1000
operacion = 0045, date_to = 31.12.9999, date_from = 21.02.2007.
Dates 20.02.2007, 21.02.2007 are OK because they are got by a R3 table, but 01.01.1000 and 31.12.9999 are system dates. Anybody can tell me where I can change these dates (system date) ? It could be in spro transaction but it has a lot of options.
Can anybody help me, please ?
Thanks a lot in advance.
Best Regards.
Ana

Hi
U can do the general setting for currency, date time, number format
Through T-Code SU01 in general setting tab
SPRO
Got to general settings -> Define Countries
These setting will only effect when you logoff and then login the user.
Regards,
BRS

Similar Messages

Can we change the system date using Sql

can we change the system date using Sql statement..
can anyone help
Tariq.

There is an initialization parameter called FIXED_DATE which lets you set a fixed sysdate for testing purposes, and you can alter that date using the ALTER SYSTEM command, but as implied by the name you are setting a data/time that doesn't change. Since the normal sysdate is derived from the O/S it cannot be altered through SQL

N82 Self change the system date!!!

Hi to all....let's get to the problem at once....
my Nokia N82 was working flawlessly with the v30 firmware BUT when I upgraded to v31 it started to change the system date!!!!! I've search for a parameter in the menus but .... no such parameter...) it adds 2 days in the system date in many occasions.... I thing this is a mega-bug.... please tell me if anyone else have this problem.

I'm having the same issue, after upgrading firmware to v31.0.016 the system date "jumps" two days forward every morning if I set a workday-alarm and then switch off the phone. After the alarm rings I turn on the phone and it shows the correct date, but a few minutes later it jumps 2 days forward.
Because of this bug all of the services connected with system date (agenda, calendar, alarm, memo, reminder, calls register, ...) don't work correctly and are almost unuseful unless you manually correct the system date every morning.
I'm not going to leave the phone on (not even in offline mode) all night long as a workaround, because I paid lots of money for a working smartphone, and it's not working correctly now.
I reported the issue to Nokia, I'll let you know if they will suggest any solution.

How to change the default date in Person assignment tab?

Hi experts,
Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
Thanks and rgs,
Michelle

Hi Michelle,
Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
Hope this is useful...
Regards
Aatish

How to change the posting date in UD stock posting for a HU managed item?

Hi,
We are using Handling Unit managed items with QM activation. For a specific HU managed material, we wanted to post the stock on a previous date. We have created PO on a back date and made GR also on a back date. Now the problem is, the system has generated an inspection lot. Now while trying to do UD and stock posting, I do not see the "Doc" tab which we normally see in UD stock posting for normal inspection lots (non-HU managed items) for changing the date.
I don't see any other way to change the posting date for the HU managed item in UD stock posting. Anyone can help please?
Thanks & Regards,
Madhavan Krishnamoorthy.

I don't think you can.
Craig

Tax Code removed on changing the posting Date in Purchase Order

Dear All,
This is with reference to the Purchase Order Document tax part, the document has been defined with the approval procedure and document series followed as annual series. The document series is linked to the period indicator as I am using the monthly series for the A/R & A/P Invoice.
Now some Purchase Order was generated in the last month i.e. 30 NOV 07 which has gone for approval. These document are approved in the current month (Dec 07) & user are trying to add the records it displays the message as "Date deviates from permissible range [Purchase Order - Posting Date] [Message 173-11]" as the period indicator is changed to Dec 07 in document numbering.
The problem is when user changes the document date to Dec 07 for posting; system removes the tax codes, which is available in the document. Now as this is approved document user is not able to change or renter the tax codes.
In this situation what can be done as the same case will again happen for the next month.
Pls. provide the solution / work around for this problem.
Regards,
Yogesh Jadav

hi yogesh,
Cancel/Close the created purchase order.
First you should change docduedate in posting period upto december 2007/end of fiscal year,by following the below path.
(Administration->sytem intialization-> general settings--> posting period tab)
Create a new purchase order.
Send it for approval,authorizer can change date as required,
once the posting date changes,tax code get refreshed,authorizer
need to select tax code once again.
Tax code normally get refreshed when you change posting date it's normal
system behaviour.
After authorizer does above changes,he can approve purchase order.
Once purchase order is approved,orginator can add it as purchase order in draft stauts.
After approval we can not do any changes in purchase order.
Hope my solution will solve the problem.
Thanks,
With regards,
A.Jeyakanthan

Costing error while change the mrp data

Hi dears,
This is Rem process. when i try to change the material master MRP data ex. ( mrp type M1 to M0)
system not allow to change and show the error as
Product cost collector 000000750122 is still active (assigned to PrCtr 50601-025)
pls give some hints to clear
Any program is there to change the MRP data for the material master in production server directly
thanks

Dear ,
Did you try MASS or MM70 Transction ?
If you do not want to go for Deletion flag of PCC , you need to settle the REM qty .You need to do product cost for semi finished product and finsihed product in KKF6N and after that you have to do mark and release in CK24N .For standard cat Estimate create std Cost estimation(CK11n) and std cost Estimation Mark & release(CK24) .
1.Backflush (confirmation) the Planned order - MFBF. Results planned order will Reduced and GR,GI, activity cost will be posted. U need not convert the planned order to production order, Confirmation for planned order only.
2.To see Backflushed documents MF12
3.Then Goto KKF6n to see the Manufaturing cost.
4.Over head calculation - (Co42)
5. Variance calculation (KKS6)
6.Settlement(KK87)
Try and revert back
Regards
JH

Schedule a report with the system date imbeded in the file name

Hello,
Could anyone tell me how I can schedule a crystal report with the system date imbedded in the file name (FileNameYYYYMMDD) through BOE? When I scheduled the report through BOE, I gave a file name and selected Attach Date Time, but the file name is coming out slightly differently and with the time imbedded as well (FileNameYYYY-MM-DD-HH-MN I think). Is there a way to change the default system date time format in BOE so that the date stamp comes out the way we want it?
Thanks!

%SI_STARTTIME% will add the time the report ran too.
Adding onlt the date will necessarily have to be done via the appropriate SDK.

In sm30, when save, how to fill the table with the system data in the table

Hi all, in SM30, we have user name and time fields, when we create record, after we click the SAVE button, it will automatically fill the fields with the system data, how can we realize it?

Hi ,
Do like this.
1. Go to SE11 -> give your table name and press on change button .
2.Go to Menu->Utilities-> Table Maintainance Generator , then it will take you another screen .
3.Assign Functin group if already have one , other wise create function group and assign
4.Go to Menu->Environment->Modification->Events , again it will take you to another screen
5.Click on new entries
->Now press F4 in T column . Select "01" - Before saving the data in the database and in form routinue give any name of the routinue like "SAVE_USER_DATA" and press enter then u can see an editor symbol in next column click on that it will take you ABAP editor there type this code .
ztable-username = sy-uname.
ztable-createtime = sy-uziet.
check and activate the code .
With this your job will be complete . Now while entering data just leave columns blank , they will insert corresponding username and time
Don't forget award points if it helps you.
Regards,
Raghav

How do I change the default "date range" when searching in the forums?

Hi all,
New to the SAP forums... How do I change the default date range when searching in the forums? I am getting a 90 day search by default. Then I have to change it and search again. Argh!
Thanks,
--Amy Smith

Hi Amy,
the default date range cannot be changed by users. It is defined system-wide.
Regards,
Michael

How to change the system time in (E-Business Suite)

Hi,
I need to change the system timings in E-Business Suite.
My Database & Application is on different nodes..
How could i change system timings on both...
Thanks,
Alig

Alig,
Changing the OS date/time will have no impact on the data (except for the scheduled jobs at the database and the OS levels). As mentioned in the threads I referenced above, you have to stop the application/database, change the date/time at the OS level, and start the application.
The application is just an interface which connects to the database, so it gets all the data from the database server. However, if you want to change the date/time it has to be done on both nodes (stop all the services first as mentioned above).
Btw, what is the point of changing the date/time because of Ramadan? The business requirement of your client does not make sense (how does it differ from the application/database perspective if you start working at 9:00 AM instead of 7:00 AM for example)?
The steps in the document should be enough, and if you do not trust any of the replies here you could simply log a SR and confirm this with Oracle support.
Thanks,
Hussein

CRM-ISU: Need to change the END date and Start Date for contract items

Hi,
There is an old contract item for which I need to change the end date
and there is a new contract item for which I need to change the start date.
I need to change the contract item end date and start date using some function module in IS-U system (may be as RFC to CRM).Pleaselet me know if any body is ware of this functionality?
I am aware of a FM EECRM_CONTRACT_DATE_CHANGE which may be used for changing End Date
but how to change the start date of a new contract item?
Please let me know if any body is aware of this?
Thanks

Hi,
Hope you can solve it by this [Link1|Re: Function modules; [link2|CRM material;.
Regards,
Surjith

In MIGO , How to restrict the user to change the posting date?

Hi All,
In MIGO , I want the user to restrict from change in posting date i.e. user should not be able to change the posting date. The system should take to-day date only as a posting date.
Thanks in advance.
GP

Hi,
check this MBCF0005.
EXIT_SAPM07DR_001.
BADI being MB_MIGO_BADI.
Reward points
Regads

To change the classification data for a material using BDC

I have to update clssification data for material in MM02 using BDC so when i record the transaction MM02 using SHDB i am not able to see the value assignment window which i a able to see when i am changing using MM02 transaction directly. So can anyone have an idea regarding this ?
I have even tried updating classification data using a BAPI BAPI_OBJCL_CHANGE but i am not getting desired results....can anyone suggest me what are the parameters need to be passed to the BAPI. Thanks in advance for your help....

Hi Nagarjuna,
BAPI_OBJCL_CHANGE : This BAPI changes an existing classification, or creates the classification if it does not yet exist. The classification is defined by the required entry fields for the object key (ObjectKey), object table (ObjectTable), class name (AllocDetail-Class_Num), and class type (AllocDetail-Class_Type). The default value for the optional date field (KeyDate) is the system date, on which all classifications become valid. The new characteristics and/or values are transferred to different tables according to data type. Numeric, time, and date characteristics are transferred to table AllocValuesNumNew, character and boolean characteristics are transferred to table AllocValuesCharNew, and currency characteristics are transferred to AllocValuesCurrNew.
The object key (OBJECTKEY) must be transferred in internal format. This means before conversion exits. For example, a material number must be transferred with leading zeros.
If the BAPI runs without errors, table Return contains no messages of type "E".
Assignment created: message CL735
Assignment changed: message CL737
Assignment not changed: message CL738
This BAPI only changes the parameters of an existing assignment (or creates a whole new assignment), but it does not delete the assignment to a class and replace it with an assignment to another class. If you want to reassign an object, the old assignments must be read with BAPI_OBJCL_GETCLASSES and deleted with BAPI_OBJCL_DELETE, then the new assignments must be created with BAPI_OBJCL_CREATE.
The information transferred by this BAPI replaces all old information. An empty field means "delete entry!", not "no change".
This BAPI does not change the database. To change the database, call BAPI BapiService.TransactionCommit afterwards.
You can only use this BAPI for objects that are not classes!
This BAPI only processes assigned values for classification - not for configuration.
Reward points if helpful.
Regards,
Hemant

To change the default date format of OID

Hello Gurus,
Any idea on how to change the default date format of OID?
The default date format of OID is something like "yyyy-mm-dd hh:mm:ss .0-0700" I want to change it to "yyyymmddhhmmss.0-0800".
Is there any system property to do the same.
I have provisioned users from OIM to OID.
Any ideas/clues/hints on this.
TIA,
- oidm.

nobody? ?

Change the system date

Similar Messages

Maybe you are looking for