Change the tftp server for LMS

We have a central location that has numerous vpn connection to many different clients. Instead of using the TFTP server on LMS could I point LMS to use a tftp server on the client lan? That would make transfer of IOS so much fast instead of trying to copy across a heavily used WAN connection.

Hi,
Yes it is possible. There is a upgrade option using Remote Staging. The Remote Staging and Distribution option helps you to upgrade multiple devices over a WAN.
You can perform remote staging and distribution by either of the methods:
•External FTP server
•External TFTP server
•Remote Staging Device
In this workflow, a managed device or external TFTP server or FTP server is used to stage an image temporarily. The staged image is then used to upgrade devices that are connected by LAN to the Remote Stage device or external TFTP server or FTP server. If you use this method, you do not have to copy a similar image, multiple times across the WAN.
After the image distribution job is completed using a managed device as a remote stage device, the configuration changes made to the Remote Stage device are automatically reversed and the staged image is deleted from the Remote Stage device.
After the distribution job is complete, you can use the Software Mgmt Jobs tab to:
•Undo an upgrade and roll back to the previous image
•Retry devices that failed a previous upgrade
To distribute images using Remote Staging:
LMS 3.x :
Resource Manager Essentials > Software Mgmt > Software Distribution
LMS 4.x:
Configuration > Tools > Software Image Management > Software Distribution
Select Use remote staging and click Go to configure IOS upgrade job.
-Thanks
Vinod

Similar Messages

Can I change the smtp server with Yahoo push account?

My yahoo email account will send and receive over EDGE using the default yahoo mail settings. On my home Cox internet WiFi network I can retrieve messages but cannot send. When sending it says it was sent and makes the "swooshing" mail sent sound, but the message disappears. It does not appear in the "sent" folder or "drafts" folder either. No error message is returned.
I suspect this is related to Cox blocking the smtp server, but the iPhone does not allow me to change the smtp settings on the default yahoo account. Does anyone know how to do this? I can set it up manually for POP access, but then I'm flooded with spam.

No, you cannot change the SMTP server on the Yahoo push account.
Yahoo push only works if you configure your account using the Yahoo! Mail shortcut on the iPhone, and that shortcut does not allow for ANY customization.

Can I change the default settings for InfoView?

Hi,
I have a Crystal Reports Server 2008 running. The users access their reports via the InfoView web application.
In this application each user can configure some settings, like whether to use the Acrobat Reader or an ActiveX control for printing. Due to the fact that most users are not experts, is it possible to change the default values for all users by administration?
Regards
Joern

This was previously answered in an older thread. Hope this helps you...
How to set default preferences for all users in Infoview 3.1/CRS 2008
Posted: Feb 13, 2009 9:57 PM
Click to report abuse... E-mail this message Click to reply to this thread Reply
It took me a few tries to figure this out, so I thought I would share the steps I took to accomplish this.
This was successful for InfoView Preferences for a Crystal Reports Server 2008 application (XI 3.1 base).
1. Download the jsp files here: http://service.sap.com/bosap-supportsw
Choose BusinessObjects Enterprise > * > Samples >
"How to set preferences for all users at once in BO XI R2"
2. Extract the files and rename logon.jsp to setpref.jsp
3. Copy the downloaded jsp files to your root Infoview webapp folder (where the wars deployed to). We use the default - Tomcat. The Infoview webapp is deployed to C:\Program Files\Business Objects\Tomcat55\webapps\InfoViewApp\ If this is you, copy to here.
4. From your browser launch http://crystalreportshost:8080/InfoViewApp/setpref.jsp (your infoview link) and follow the instructions!

Can I change the standard text for web item 'INFO_FIELD_ITEM'?

Hello experts.
I made a WAD template using web item 'INFO_FIELD_ITEM'. In data binding, I used the 'Last refresh' of general text elements. As a result, in the web browser I can see the last update date & time. (e.g. 'Last refresh: 2007.01.17 17:34:44') Then our customer want to change the default text "Last refresh" as "Working time".
How can I change this?
I tried to change the text symbols for program SAPLRRSV. But it worked only in Bex Analyzer not in the web.
Our server version is Netweaver 2004s and SP10.
Best regards.
JY Park.

Hello,
I had the same problem - just wanted to display the values of a variable in an info-field, but not the caption.
I found out, that there's a tag for Info-Field Item called ONLY_VALUES (it's the checkbox under the headers visible checkbox in the properties dialog of the Info-Field Item; in my WAD version, there's no label assigned to this checkbox, so it was not easy to find out what it should be),
You have to set it to 'X' (check it) ; then you get the unformatted value of the variable (no caption anymore).
<bi:INFO_FIELD_ITEM name="INFO_FIELD_ITEM_1" designheight="500" designwidth="350" > <bi:WIDTH value="350" />
<bi:HEIGHT value="500" />
<bi:DATA_PROVIDER_REF value="DP_1" />
<bi:HEADERS_VISIBLE value="" />
<bi:ONLY_VALUES value="X" />
You have to insert the info-field item between span tags so that you can define your own formatting values.
The ONLY_VALUES tag works the same as the tag 'RENDER_AS_TEXT' you have with the text item , see
http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
There's only one disadvantage: If you have chosen a lot of variable values (multiple selection), the variable string gets very long and no line break is performed, because all blanks in the string are replaced by nbsp's. I solved this with a little Java Script, replacing the appropriate nbsp-s with br tags.
Hope it helps
Beate

Charm Impact on changing the production server

Hi All,
we currently using Charm for a three system ECC landscape.
Now currently so many changes are there in various stages.
now , the team is planning to change the production server to high availabitlity server.
there will not be any change in the transport route and all, only instead of existing server, the new server details will be added.
I just wanted to know will there be any major impact in the current chagnes.
kindly advice.
Thanks,
Subhashini.

Hi
its like system migration to the new server? or it is by client export?
can you refer the thread [How to replicate Existing running Production server.|How to replicate Existing running Production server.]
and read the note [Note 1395727 - ChaRM project does not work after product version changed|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1395727]
more further on
[Note 1394820 - SMSY: Converting SAP ECC system to SAP ERP system|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0001394820&nlang=E]
check and update
jansi

Have a dedicated TFTP Server for CCM cluster

Hi,
One CCM3.3(3) cluster in production, in which the publisher server was the TFPT server.
Now we need expend the system and would like to deploy a dedicated TFTP Server for the cluster. Is there anyone telling me what I should concern if I have a dedicated TFTP server other than the publisher server?
Thanks,
JJ

Hi,
I have a similar issue. I have actually a pub and a sub, the pub is also the tftp server. Following the SRND, I need a dedicated tftp server because we're almost at 1250 users, growing every day. My question, which may seem very basic, is how do I build a dedicated tftp server ?

Change the Exchange server name in outlook

Hello All,
Configured two Exchange server 2010. Both server have Mailbox, CAS and HUB installed. All the user use outlook (Exchange Client). All outlook configured with exchange server host name not mapi name. Now i need to change the exchange server name in outlook.
Is there any procedure to change the Exchange server name for outlook automatically. Please suggest.
Thanks

Hi,
Let’s begin with the partition named when RPC endpoint Changes in the following article:
http://blogs.technet.com/b/aljackie/archive/2013/11/14/outlook-rpc-end-point-and-pf-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and-restart-outlook.aspx
“To add further on the cas array, the Outlook clients with an existing Outlook profile would continue to use the old RPC endpoint rather than the new RPC endpoint (even though Autodiscover detected the change). This is because the old RPC endpoint does not
return an ecWrongServer response to the client. The RPC endpoint accepts the connection; therefore, Outlook ignores the Autodiscover response because it has a working connection.”
In this case, except with recreating a profile, we can move mailboxes to force the Outlook client to do a profile discovery and update the profile based on new information.
For more information about moving mailboxes, please refer to the following article:
http://technet.microsoft.com/en-us/library/bb124495(v=exchg.141).aspx
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Change the storage server of archiving files

Hello Gurus,
I have archiving files in iseries storage, but because the disks in iseries servers is very expensive i want to change the storage server to Intel server with Win2003 or Linux S.O.
This change is posibble? i would appreciate your suggestions.
Regards,
Ernesto Castro.

Hi,
With my understanding about accessing the archive data from the storage system, i can say that it is possible.
1. First you should check with archive server vendors (such as opentext or Documentum) whether their application will support in this scenario.
2. When you are relocating the archived data from one storage to another storage system then the link between the archived data and the physical path will be disconnected.
Solution: A. create a content repository of new location and assign this content repository to all the archiving objects that are affected.
B. Delete the build Infostructure for the archiving objects and after assigning the new content repository build the infostructure again and try to access the archived data.
Hope this mail could help you.
-Thanks,
Ajay

Pragmatically change the DNS server

I have been trying to figure out how to write a program to change the DNS server, like you can in the control panel. I have played with Resolv.conf and a whole bunch of low level APIs.
From the terminal window, things like nslookup work (use the right dns server) but Safari doesn't. It still is using the original DNS server. I can stop and start safari and go to web pages it has not visited before and it still uses the old DNS server, so its not just pulling up cached pages.
It seems the low-level API stuff doesn't work for higher level applications like Safari (its the only high level app I know of that uses DNS to test with).
What is the API to use to change the DNS server address such that everyone,, like safari, will use the new DNS address?

Yeah, but I am changing all the DHCP entries in the system and it still gets out. However, it is solved by updating the system config. I was just curious as to where it got its DHCP server info from when the system config was blank and resolv.conf was set to my DHCP server.

Recently backing up my ipad onto my macbook, which is the backup server for all of my gadgets. This includes all my photos and tons of music. The macbook said it could not backup the ipad because there was insufficient disc space to do so. What now?

I have a macbook operating OSX10.6.7. Recently backing up my ipad which had lots of photos from a recent vacation. I use this laptop as the backup server for all of my gadgets so it has thousands of photos and tons of music. It just told me that it couldn't back up the ipad bc there wasn't enough disc space. I was afraid that this would happen eventually. What next? Newer laptop with more space? I'm not sure what files I could sacrifice to free up more space as most of these are important.

What size hard drive do you have in your MacBook? The cheapest options are, a larger internal hard drive, or an external drive. Or you could get a cheap desktop PC and network to it for storage. I've got one that lives in the hall with 3 Terabytes (That's 3000gb) of storage.

How does one change the font size for folders and/or file lists in the Bookmarks Library?

How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
With regard to font size,
1. there is no “Edit Bookmarks” or like option to edit the list in this version
2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
3. expanding the browser window has no effect on font size
4. “Preferences” settings for font size has no effect in that window either, including advanced settings
5. “Help” offers none that I can find.
Can any of you Help?!?

Maybe this extension helps:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

Changing the default view for Line Items in an Auction.

Hello All,
We have a version 5 client who is asking for us to change the default view for line items in an auction.
Currently, if you have an auction setup, and you go to the Line Items tab, the default view is the "Basic View". The client would like to change the Default from "basic view" to "price view".
Is there a way to change this default in the system? Can this be configured using query groups? Any information would be helpful.

Hi wood cloud,
This is not possible, bcz there is no VLV for that drop down and we cant set it to the price view.
Thanks,
Ankur Goyal

Can you change the units used for size and position in layout editor?

Hello,
In Aperture 3.4, does anyone know if you can change the units used for size and position in layout editor? The page is set in inches, but the image size and position are given in centimetres and I would prefer to work all in inches to create custom layouts. I can't see any way to change this. If anyone knows how it would be much appreciated. Thanks!

Aperture uses the unit settings defined in the System Preferences. Set the "Measurement Units" in the "Region" tab of the "Language & Text" preferences to "US"; the Aperture will display the Size & Position in inches, if it is the "Book" layout manager you are asking about.
Merry Christmas!
Léonie

How do i change the email address for my icloud account on my 4s. when i sign in on line it is my new email address so i thought it would change automatically but obviously not!

how do i change the email address for my icloud account on my 4s. when i sign in on line it is my new email address so i thought it would change automatically but obviously not!

Settings>iCloud...scroll down...delete account. Then setup iCloud with your new ID.
You can't change the Apple ID for your iCloud account, you have to delete it.

How do I change the email account for icloud on my iphone only

How do I change the email account for icloud on my iphone6 only. I don't want to change my ipad or my husband's iphone6. Currently all 3 devices have the same gmail account associated with them. I have created a new & separate apple id and I want that on my phone but I can't figure out how to delete his email from my phone.

To change iCloud accounts you have to go to Settings>iCloud, sign out, then sign back in with your other ID to create your new account. If you want to migrate a copy of the iCloud data to the new account, start by saving any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save Image. If you are syncing notes with iCloud that you want to keep, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Sign Out, choose Keep on My iPhone and provide the password to turn off Find My iPhone when prompted. Then sign back in with your new Apple ID to create your new account and choose Merge to upload the data to your new account. Once you are on a separate account you can go to iCloud.com and delete your husband's data from your account (and he can do the same with yours).
Just be aware that the current @icloud.com email address cannot be moved to the new account, nor can the current my photo stream album (which is why you need to save any my photo stream photos you want to keep to your iPhone before signing out of the existing account).

Change the tftp server for LMS

Similar Messages

Maybe you are looking for