Change the topic icon in Webhelp TOC?

We are using RoboHelp 9 on a Windows 7 platform.
When we publish Webhelp, the topic icon in the published output has a question mark in it.
We have had almost universal feedback from our target audience that they are confused by the question mark (they thought it indicated an error occurred when we published the Webhelp).  Is there a way to specify a different topic icon for the TOC in the properties of RoboHelp somewhere, but retain the "Default" skin?
We have two alternatives that we would prefer not to use:
1. Change the wht_toc3.gif file in the published output.  (We publish often, so we want to avoid a post-publishing clean-up task.)
2. Go into the RoboHelp 9 application folder on the C drive where the GIF file resides and change it there.
We guess the folder is located here, although we found the file in a few different places:
C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\WebHelp5Ext\template_skin
An icon that would be an acceptable replacement would be whd_toc3.gif (it has three horizontal lines in it instead of a question mark).
Is there any way to make this change in RoboHelp project or Webhelp properties anywhere?
Thanks in advance!
Tim

Hi Tim,
If I understood you correctly, then here is the answer. You can go to Project Setup Pod> Skins and double click on the Default Skin, In the right hand side top corner click on Navigation, Underneath that Topic/Page> change the image of the Topic and press ok.
Generate the webhelp.
Hope this helps.
Thanks
Priyank

Similar Messages

  • Changing the Topic Icon

    Someone asked me this question--can the Topic icon, with the
    question mark inside, be replaced with something similar that does
    not have the question mark?
    I'm curious if anyone has heard this one before.
    Regards,
    Sharon

    Hi all
    I'd be asking where exactly you are seeing the icon. TOC?
    Browse Sequence panel in a CHM? Where?
    In CHM, assuming you are talking about the TOC, you may
    change it by right-clicking the page in the TOC Editor. Then choose
    Properties. From there, choose the Advanced tab. Once there, you
    may choose any of 42 different images!
    If you are referring to the images that appear in the Browse
    Sequence bar of a CHM, you may not change those. I estimate they
    are governed by the HHActiveX.DLL file.
    Cheers... Rick

  • How do I change the weather icon to my local weather?

    I am new to iPhone and have 2 questions:
    1. How do I change the wether icon from Cupertino and New York to local weather?
    2. How do I remove icons from the home page that came already installed? I tried pressing and holding until they vibrate but no 'X" appears to delete them.
    Thanks!

    1. How do I change the wether icon from Cupertino and New York to local weather?
    Select the i circle icon at the bottom right.
    Select the + icon at the top right to add a city. Select the red - icon next to a city on the list to remove a city.
    Select the icon at the far right of each city to move that city up of down on the list.
    Select Done at the top right when finished.
    2. How do I remove icons from the home page that came already installed? I tried pressing and holding until they vibrate but no 'X" appears to delete them.
    The default icons cannot be removed. The default icons will not have an X to remove them. Only user created web clippings will have the X and can be removed.

  • How do I change the "trash" icon to "archive" icon in email on my iPhone using iOS7?

    How do I change the "Trash" icon to "Archive" icon as the default setting in email using iPhone iOS7?

    That is very much dependent on your Email account. 
    Go to Settings->Mail,Contacts,Calendars->Accounts->Your Account->Account->Advanced->Move Discarded Messages Into.
    Choose Archive Mailbox.
    It may not be there if its not supported by your email provider.

  • How do i change the battery icon to a percentage icon

    how do i change the battery icon to a percentage icon

    Settings -> General -> Usage -> Battery Percentage (ON)

  • Is there a way to change the default icon for a sound file in KN2

    i have need to include dozens of sound files on each slide that will trigger as text builds. i can handle all the transitions fine but i cannot figure out how to change the standard icon for the sound file.
    i would prefer to have the text be the icon, if that is not possible to have a smaller icon for the file. as i build the page i am ending up with a huge mess, icons covering text, also there is not a intuitive way to tell which sound file is which with out click/playing each file.
    powerbook g4 Mac OS X (10.4.4)

    Did you try:
    OracleBI/web/app/res/s_.../popbin/
    EX:
    line.pcxml Look for <SeriesDefinition ...
    we modified the line width and a few other things. You'll have to modify all the pcxml files for all the chart types you want to customize.

  • How can i change the default icon of a new folder?

    what i mean is like every time i create a new folder instead of changing the icon after its created, can i somehow change the default icon on a new folder i create? so when i create a new folder its created with the icon i want it to have?
    and i want to do it manually i dont want to use programs for it
    thanks

    nemesio wrote:
    i know but i dont want to use candy bar, were do i go to do it manually?
    why not? use LiteIcon then. it's free and is MUCH safer than mucking with system files by hand. if you insist you can do it as follows. go to /system/library/coreservices. control-click on coretypes.bundle and select "show package contents". go to contents-> resources. change the file GenericFolderIcon.icns with your own .icns file. back up the original bundle first.

  • Change the default icon for unsatisfied node

    Is it possible to change the default icon for the unsatisfied node (unsatisfied indicator). I have checked the UI content element with the same name, but it does not have the source file setting in it, so I guess it is hard coded. I tried to change the source file with the name unsatisfied_status.gif to a different image and it works, but this will be a system wide change. I want to do this as a model specific change. Has anyone done this before? Thanks in advance.
    Cheers,
    Biju.
    [My Oracle Blog|http://oraclewithbiju.blogspot.com]

    Did you try changing image name in UI edit page?
    UI edit page lists few images which can be changed for each UI, like unsatisfied indicator, logic status icons etc.

  • Is it possible to change the app icon for websites?

    Hi,
    I have created a web shortcut to my home screen, at the moment the icon defaults to a shot of the web page (although very small) and was wondering if it was possible to change the app icon ?

    Yes, if you can upload an icon to the webpage and change the HTML:
    http://developer.apple.com/safari/library/documentation/appleapplications/refere nce/safariwebcontent/configuringwebapplications/configuringwebapplications.html
    http://developer.apple.com/safari/library/documentation/InternetWeb/Conceptual/i PhoneWebAppHIG/MetricsLayout/MetricsLayout.html#//apple_ref/doc/uid/TP40007900-C H6-SW31

  • Change the mouse icon.

    Hi all I need to change the mouse icon.
    I'm using:
    setCursor(Cursor.WAIT_CURSOR);
    buet the problem is that this only works inside the application. If the mouse cursors does out of the application (f.e. to the windows desk) the mouse changes into the typical arrow icon.
    What I need is the mouse icon to remain as a sand-watch icon till some opperations are done in the application.
    Thanks in advance.
    Dani.

    I believe this behaviour is controlled by the operating system. This is part of the pre-emptive multi-tasking system, the principle being that one busy application should not disrupt the rest of the OS (compare with Win 3.1).
    So I don't think you can do that, and even if you can, you probably shouldn't
    HTH

  • Changing the dropdown icon of af:selectOneChoice

    Hi,
    I'm lost with adf skin selector : I don't found any documentation of skinning the af:selectOneChoice. I would like to change the dropdown icon when the component is in "idle" mode, and when there's mouseOver.
    Regards
    Luc-

    Hi andre,
    thanks for your answer. In the demo, there's nothing that could help me with my problem.
    But I was wondering if changing the dropdown icon is even possible, since it's a component that has differents displays from os to os and from browser to browser : the java portability.
    So I don't think I could do that right ?
    Regards
    Luc-

  • Using Custom Icons - Changing the Finder Icon

    So I know you can just do a simple copy and paste under "get info" in order to change icons for applications and folders, but how do you do this for Finder? I know this is possible, if not for the simplest reason that one of the downloads that Apple has featured on this site for icons has a Finder icon (bad logic I know, but it seems odd that Finder would be the only icon you couldn't change). The problem is, how do you "Get Info" on Finder? Where would you find finder (no pun intended)?
    Thanks in Advance

    Thanks for the help in finding the icon, the only problem is that it won't let me alter it. I even changed permissions on the bottom of the "get info" screen to allow the current user (also the administrator) to both read and write, but it wouldn't let me paste a different styled icon over it. Any suggestions on how to change the Finder icon to a custom one? And ya we were thinking about how we would change it back too, but realized its not really that big of an issue because all our friends and even we have multiple macs, so we could always just copy it back that way.

  • Changing the topic titles in jeopardy Captivate 8

    Is there a way to change the topic titles in Jeopardy for Captivate 8?

    It is January 2015 and it doesn't appear this has been fixed. Very disappointing. We really could have used this in my courses.

  • How to change the application icon in 10g

    Dear all,
    how to change the application icon in forms 10g. i mean the icon which is located on the window it self.
    Best Regards,
    ShoooSh

    Hello,
    <p>Maybe you could find a solution in this article</p>
    Francois

  • Changing the folder icon

    I'm trying to change the folder icon for the Pictures folder. But, when I do, the Pictures icon on the left of the window also changes and becomes the same as the Pictures folder icon. I want the two of them to be different but can't seem to figure it out.

    http://www.panic.com/candybar/
    If you really want to get into it, changing application icons, most of them are separate .icns files within the application package.
    For example, the Finder icon is
    /System/Library/CoreServices/Finder.app/Contents/Resources/Finder.icns
    When you select Finder.app-Ctrl-click and choose show package contents to dig further down.
    Most of the other standard icons used by the Finder are in the same Resources folder.
    If you install the Developer Tools package from the MacOS X Install DVD, you can use the Icon Composer to apply and save your own icons to pretty much anything.
    !!< Just be sure to back up before and Repair Permissions afterwards >!!
    http://iconfactory.com/freeware/icontainer

Maybe you are looking for

  • Officejet 7310xi All in One Printer no longer connects wirelessly

    Hello all, My Officejet 7310xi All in One Printer no longer connects wirelessly. The printer does no show up while searching for it wirelessly where it had previously. In the past it would say that the printer (HP Series 7300) was offline.  I would r

  • EJB called via JNDI in a Repository Service :: ClassCastException

    Hi SDN, I've got a problem in calling an EJB from a Repository Service... Here the steps I've follow:   -  An EJB has been created with some Business Methods in it; it has been packaged in an EAR and deployed;   -  This EJB is looked up succesfully v

  • How to Control Browser Our Own way

    hi, my task is how to handle browser events on my own control.Let me explain my problem clearly.Now my pc is stand alone(dont having internet connection) just serail communication to other pc.Some how i retrieved search results from interenet connect

  • Member request problem as a admin

    How to see my Skype member' request? and I cannot find my member request to confirm their subscription as a admin!

  • Transporting DBConnect DataSource to BWQ / BWP and Oracle Instance Name

    Hi, I have a DBConnect Datasource / Source System in our BWD system that is pointing to an Oracle instance that is also a DEV system.  When we go to BWQ / BWP we want the source system to point to the Oracle QA / PRD system.  Is there a table where a