Change the transaction status when creating a follow up activity

Hello All
We need to change the activity status if a follow up document is created from. E.g. If an activity is created type 001 then a follow-up activity type 003 as a follow up document from 001 the system automatically changes the activity status from open to in process. I need detailed steps regarding how to reach this
Regards
Jacopo

See if you can "exploit" CRM_COPY_BADI and function modules CRM_STATUS_CHANGE_EXTERN to change the User status or CRM_STATUS_CHANGE_INTERN for System status.

Similar Messages

Changing the catalog profile when creating a QN FROM ACTION BOX in transaction QM02

Hi All,
When I create a quality notification from the action box in transaction QM02, the catalog profile is fetched from the material master. I want this changed so that the catalog profile is
always copied from the QN being preocessed in QM02. (current QN)
I am not able to locate the code where the catalog profile for the new QN(QN being created) is fetched from the material master.
If I change the catalog profile in the material master, it works, but that is not a solution for me.
Need the exact point where I can pass in a different catalog code.
Also, I do not see the new QN number anywhere while debugging.
PS: The QN is being created from the action box in transaction QM02 and not from transaction QM01.
Thanks.

Hi All,
When I create a quality notification from the action box in transaction QM02, the catalog profile is fetched from the material master. I want this changed so that the catalog profile is
always copied from the QN being preocessed in QM02. (current QN)
I am not able to locate the code where the catalog profile for the new QN(QN being created) is fetched from the material master.
If I change the catalog profile in the material master, it works, but that is not a solution for me.
Need the exact point where I can pass in a different catalog code.
Also, I do not see the new QN number anywhere while debugging.
PS: The QN is being created from the action box in transaction QM02 and not from transaction QM01.
Thanks.

Is it possible to change the default URL when creating new hyperlinks?

I'm currently working to take a 128 page catalog that was created in InDesign for print and turn it into a interactive PDF to post on our companies website. The catalog contains thousands of part numbers and I'd like to link each one to its corresponding stock status page on our website that gives current availability and pricing for any particular customer.
So say I'm dealing with part number "XXXX". When I go to add the hyperlink the default web address it spits out is " http://XXXX ". Instead of that, would it be possible to change the default to " http://forums.adobe.com/discussion/XXXX/1 ". Obviously I just used this website as an example, but it would save so much time if I could avoid having to type the exact same URL every time.
Or maybe is there a quicker way to do this other than what I am currently trying?
Thanks

I've found some external software applications that will do it, so that leads me to believe its not possible within ID CC.

How do you change the max data when creating a DVD?

I recently filmed a show and am making DVD copies. The show runs 1hour 45mins and is about 79gb in HD. I'm using compressor 4.1 to create the DVDs so it fits on one disc. I've made a few test copies but so far every DVD freezes at around 43 mins when I play it in another computer or dvd player. I heard in a blog that reducing the max data should solve the problem. This is my first time using compressor and I wanted to know where do you go to change the max data and how will that affect the video quality? Also, what is the suggested range of data limits for a project of this size?
Thanks

Duplicate the Create DVD preset from the Settings pane and name it.
Select the MPEG setting in the batch window.
Open the Inspector and click the Video tab.
Choose your "Encoding Mode" (CBR, etc.).
Uncheck Automatically Select Bit Rate.
You can then move the slider: somewhere around 4 Mb per second should be about right.
Just to add that you might also have a problem with the physical media. Try another brand to see whether that makes a difference.
Russ

Changing the alert tone when "find my phone" is activated?

Is there a way to change the alert tone on iphone 4s when the "find my phone" is activated? The one it plays is kind of weak. TIA!

Welcome to the Apple Community.
I don't believe there is.

How to change the user status from CJ01 transaction

Hello All,
I am doing a BDC in CJ01 transaction where there is a field called "User Status" .
This field is not editable. However the requirement is to populate this field with some value based on some other entries.
Is there any Function module / BAPI to update user status from CJ01.
Thanks in advance.
Regards
Indrajit

Hi Anbu
    Thanks for your kindness.
     I had got the proper badi definition ( RECN_CONTRACT ) before. I have try to implement the badi in my implementation YCL_IM_RECN_CONTRACT and below is my example codes. It can update the user status when the SAVE button is pressed. My example codes are below:
METHOD if_ex_recn_contract~check_all.
DATA:
      cl_recn_contract   TYPE REF TO cl_recn_contract.
DATA: r_status_mngr TYPE REF TO if_reca_status_mngr.
DATA: lv_status_profile TYPE j_stsma.
DATA: lt_status TYPE re_t_status,
            ls_status TYPE LINE OF re_t_status.
DATA: r_message TYPE REF TO if_reca_message_list.
cl_recn_contract ?= io_object.
CHECK if_before_store = 'X'.
CALL METHOD cl_recn_contract->if_reca_has_status~mo_status_mngr->get_current_status
    IMPORTING
      ed_status_scheme = lv_status_profile
      et_status        = lt_status.
lv_status_profile = 'ZBCIA01'.
CALL METHOD cl_recn_contract->if_reca_has_status~mo_status_mngr->set_status_profile
    EXPORTING
      id_status_profile = lv_status_profile.
READ TABLE lt_status INTO ls_status INDEX 2.
ls_status-stat = 'E0001'.
ls_status-inact = ''.
MODIFY lt_status FROM ls_status INDEX 2.
   CALL METHOD cf_reca_message_list=>create
     RECEIVING
       ro_instance = r_message.
CALL METHOD cl_recn_contract->if_reca_has_status~mo_status_mngr->set_status
    EXPORTING
      it_status           = lt_status
      if_only_user_status = 'X'
      io_msglist          = r_message.
REFRESH lt_status.
ENDMETHOD.

How to change the default save encoding of the dvm files when create dvm???

When I creating a DVM(domain-value mapping) in Chinese on the ESB control and confirm it, then restarted the SOA service, the DVM that I created in Chinese disappeared from ESB control. All the maps(both English and Chinese ) are in DVM Repository.
After I updated the encoding from ‘UTF-8’ to ‘GB2312’ in the three files below, and restarted the SOA service, the DVM in Chinese appeared on ESB control.
But when I adding the second row in Chinese and save it, then restart the SOA service, the DVM in Chinese disappeared from ESB Control once again. Because the encoding in the three files below is updated from ‘GB2312’ to ‘UTF-8’ .
Files:
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm\Chinese.xml.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\content\files\dvm\Chinese.xml_1.0
How to change the default save encoding of the dvm files when create dvm in ESB control ???

I have the same problem. When I updated to Mavericks now the bookmarks bar font is huge. I liked it the way it was before. I liked the smaller font. Also wish I could change the color of the sidebar and font/folders too.
I tried to see in preferences if there was anyway to change it, but I don't see anything there.

Function Module to change the user status of a business transaction

Hi,
I want to change the user status of a business transaction. Plz let me know if there is a function module to change the user status.I found some FMs.
- CRM_STATUS_MAINTAIN_OW
- BBP_PROCDOC_STATUS_CHANGE_DIRE
- CRM_ORDER_CHANGE_STATUS
But these FM says that it has to be used for changing system status.
Thanx,
Sivagami.R

hi Siva,
here is some sample code :
data :
ip_guid            type crmt_object_guid,
ls_status            type crmt_status_com,
lt_status            type crmt_status_comt,
ls_input_field       type crmt_input_field,
ls_input_field_names type crmt_input_field_names,
lt_input_fields      type crmt_input_field_tab,
lt_obj_guids         type crmt_object_guid_tab,
ip_guid = <your guid>.
ls_status-ref_guid = IP_GUID.
ls_status-ref_kind = 'A'.
ls_status-status = lv_newstat.
ls_status-user_stat_proc = 'ZCRMCOM1'.
ls_status-activate   = 'X'.
INSERT ls_status INTO TABLE lt_status.
ls_input_field-ref_guid = IP_GUID.
ls_input_field-ref_kind = 'A'.
ls_input_field-objectname = 'STATUS'.
ls_input_field_names-fieldname = 'ACTIVATE'.
INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
INSERT ls_input_field INTO TABLE lt_input_fields.
ls_input_field_names-fieldname = 'STATUS'.
INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
INSERT ls_input_field INTO TABLE lt_input_fields.
insert IP_GUID into table lt_obj_guids.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
    it_status       = lt_status
CHANGING
    ct_input_fields = lt_input_fields.
CALL FUNCTION 'CRM_ORDER_SAVE'
EXPORTING
    it_objects_to_save = lt_obj_guids
EXCEPTIONS
    OTHERS              = 2.
COMMIT WORK.
please award points if helps
cheers

Changing the System status for previous transactions

Hello,
Could some body help me with this ?
I have a User status profile with user status ABC which triggers system status Inprocess. This is applicable for all the new transactions for which we set the status ABC which works fine. But we have some previous transactions ( Prior to this config ) with status ABC , but system status is not Inprocess.
How can we change the system statuses for all these transactions? do we have a report for this?
Best Regards,

Hi,
You can use 'STATUS_CHANGE_INTERN' FM to change the system status. Pass Object number and status ID as inputs to the Function Module.
Regards,
Lakshmi.Y

Why can't I change the transaction isolation level?

I was trying to change the transaction isolation level from an EJB. My source codes are shown as the follows:
======================================================
/*********************** Database Routines *************************/
private void makeConnection() {
try {
InitialContext ic = new InitialContext();
DataSource ds = ( DataSource )ic.lookup( dbName );
con = ds.getConnection();
DatabaseMetaData dmd = con.getMetaData();
show_supported_trans_levels( dmd );
int status = con.getTransactionIsolation();
System.out.print( "1. " );
disp_tx_status( status );
System.out.println( "con.isReadOnly() = " + con.isReadOnly() );
con.setTransactionIsolation( Connection.TRANSACTION_SERIALIZABLE );
System.out.print( "2. " );
disp_tx_status( status );
} catch( SQLException ex ) {
System.err.println( "SQLException: " + ex.toString() );
throw new EJBException("Unable to connect to database. " +
ex.getMessage());
} catch( NamingException ex ) {
System.err.println( "NamingException: " + ex.toString() );
throw new EJBException("Unable to connect to database. " +
ex.getMessage());
private void disp_tx_status( int status )
System.out.print( "Transaction Status: " );
switch( status )
case( Connection.TRANSACTION_READ_UNCOMMITTED ):
System.out.println( "TRANSACTION_READ_UNCOMMITTED" );
break;
case( Connection.TRANSACTION_READ_COMMITTED ):
System.out.println( "TRANSACTION_READ_COMMITTED" );
break;
case( Connection.TRANSACTION_REPEATABLE_READ ):
System.out.println( "TRANSACTION_REPEATABLE_READ" );
break;
case( Connection.TRANSACTION_SERIALIZABLE ):
System.out.println( "TRANSACTION_SERIALIZABLE" );
break;
case( Connection.TRANSACTION_NONE ):
System.out.println( "TRANSACTION_NONE" );
break;
default:
System.out.println( "UNKNOWN" );
break;
private void show_supported_trans_levels( DatabaseMetaData dmd ) throws SQLException
System.out.println( "List of Supported Transaction Isolation Levels: " );
if( dmd.supportsTransactionIsolationLevel( Connection.TRANSACTION_READ_UNCOMMITTED ) )
System.out.println( "TRANSACTION_READ_UNCOMMITTED is supported!" );
else
System.out.println( "TRANSACTION_READ_UNCOMMITTED is unsupported!" );
if( dmd.supportsTransactionIsolationLevel( Connection.TRANSACTION_READ_COMMITTED ) )
System.out.println( "TRANSACTION_READ_COMMITTED is supported!" );
else
System.out.println( "TRANSACTION_READ_COMMITTED is unsupported!" );
if( dmd.supportsTransactionIsolationLevel( Connection.TRANSACTION_REPEATABLE_READ ) )
System.out.println( "TRANSACTION_REPEATABLE_READ is supported!" );
else
System.out.println( "TRANSACTION_REPEATABLE_READ is unsupported!" );
if( dmd.supportsTransactionIsolationLevel( Connection.TRANSACTION_SERIALIZABLE ) )
System.out.println( "TRANSACTION_SERIALIZABLE is supported!" );
else
System.out.println( "TRANSACTION_SERIALIZABLE is unsupported!" );
=========================================================
However, I encountered the following exception when running at the highlighted statement:
======================================================
SQLException: java.sql.SQLException: Transaction manager errors. statement not allowed in XA Session.
======================================================
To my surprise, the isolation level TRANSACTION_SERIALIZABLE is supported from the database vendor. So why can't I change the transaction isolation level?

You can change the setting, you may need to click the lock at the bottom of the preference pane. Be careful what you download and install, Gatekeeper is there to help you. OS X: About Gatekeeper - Apple Support

TO change the user status in the PM order

Hi,
My requirement is that a techician is assiged to do the work using MRS and based on that user status is update in the PM when the save button is clicked on the MRS board.
Now according to my requirement if anybody click on the save button and the technician is assigned to do the operation is done through MRS than the User status in the PM order should get changed.
As a part of standard functionality the user status is not updated.
A new user status is created in the trasaction BS02.
Can anybody please let us know how to achieve this functionality
Thanks
Mohit

We had a similar requirement and this is what we did :
1) Set up a task as a reciever for the WORKORDER SAVE event.
2) In this task called a method of a business object.
3) In the method called STATUS_CHANGE_EXTERN to change the user status.

Vehicle stuck in Yard Management - Is there a way to change the HU Status?

Hi Everyone,
I'm trying to remove a vehicle that's stuck in Yard Management (under a warehouse) but I had no luck so far. The problem is that the Handling Unit was set to deleted and I haven't been able to change its status through HU02 or even using HUMO. The system status right now is DLTD. When I try to delete the vehicle in YM, it says that I can't because of the status that's in right now.
Is there a way to change the system status back to 'PLND' for example?
Also, if I could find a way to set the user status, would it prevail over the system status?
If more information is needed, I'll gladly provide it.
Thanks everyone!

Hi Petr,
Thanks for replying.
I tried using this transaction but I don't think it's implemented in my company's SAP version.
I think I found what the problem is. In VEKP, the status field (VEKP-STATUS) is set to '0001' (Planned) instead of 0060 (Deleted). But if I display it using tcode HUMO, it shows up as 'DLTD'. Maybe the issue is that both status are not in sync with each other and that's why I can't remove the vehicle from Yard Management.

EXIT after changing the document status to Parked and complete

Hi,
I have an urgent requirement to findout a exit which will trigger after changing the document status to PARKED and COMPLETE. I need this for invoice and FI document.
I will really appreciate your help.
Kuntal

Yes the Workflow Background process completed successfully with no errors. I see the error when I query up the Sales Order go to menu --> Workflow Status -->
Activity History.
The Activity History shows error in the Wait Function and the error message is 3001: Invalid command argument.?
This error message does not explain much. I followed all the steps in document# 397364.1
Don't know why it should end in error and how it can be fixed?
Any more ideas?
Thanks

Since updating my iPhone 3GS on my friends laptop, it keeps asking for her iTunes Id not mine. When I log onto a computer it comes up with my Id but from my phone it's my friends. I don't have an option to change the user Id when it pops up either.

Since updating my iPhone 3GS on my friends laptop, it keeps asking for her iTunes Id not mine. When I log onto a computer it comes up with my Id but from my phone it's my friends. I don't have an option to change the user Id when it pops up either. So I can't update my apps, download songs or games now as it will charge my friend

Hello, 34sandy.
Thank you for the question. This behavior is normal if updated on another Apple ID account holders computer. To change the Apple ID on your device, follow the steps in the article below.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Cheers,
Jason H.

Is it possible to change the user status of a TECO Order

Hello Folks
Is it possible to changes the user status of a TECO Order?
I have tried to change it using the FM 'STATUS_CHANGE_EXTERN'. Its working fine for NON TECO Orders but not for TECO Orders.
On the other hand I was able to manually change the user status for a TECO Order in transaction IW32.
I need to change the user status from NFBK to FBK.
Please provide some inputs for the same.
Thanks n Regards
Ramesh

The simple way is via the Internationalization settings via ARD or RDP or Screen Sharing, either via System Preferences or (if enabled) via the menu bar. If you're looking for a lower-level approach, there's not AFAIK a direct command for this. As for one possible approach, might [threadID=2106201|http://discussions.apple.com/thread.jspa?threadID=2106201] help?

Change the transaction status when creating a follow up activity

Similar Messages

Maybe you are looking for