Change the transaction type and BP from contract in use - TRM

Hello good morning
We are a Brazilian company and we have some contracts on the SAP TRM.
These contracts are in partnership with a Bank called UNIBANCO. The
transaction type used for these operations is classified as "linked".
However, the bank Unibanco was recently acquired by Itau bank. The new
bank does not want to keep those contracts with us. Then we have to
change the transaction type to "NOT linked" to companies and keep the
contracts normally. It would be necessary because it will change the
accounting postings of operation and the business partner.
We could settle the current operation and insert it again on the SAP
using the new business partner and a new transaction type. However
there is some taxation that could not be applied again and we will lost
the past historic of operations.
Could you suggest some solution for that?
Best regards

Of course, my friend.
TRM - Treasury and Risk Management.
It is related ERP - Financial Supply Chain Management.
Best regards

Similar Messages

  • How to Change the data type of infoobject from NUMC to CHAR

    Hi Experts,
    I have created an infoobject with data type as NUMC, i used in DSO as a key figure and i have loaded data up to PSA.
    Now i want to change the data type of this Info Object from NUMC to CHAR.
    Can anyone suggest me the solution for this issue.
    Regards,
    Venu Gopal.K

    Hi pavan/binu,
    I have not loaded data into DSO i just added IO in Key fields and i started editing this IO then im facing error like
    1.Master Data Table /BIC/PZCUSTOMER contains data: Characteristic ZCUSTOMER cannot be activated     
    2.SID Table /BIC/SZCUSTOMER contains data: Characteristic ZCUSTOMER cannot be activated
    Im also unable to edit the P & S tables in SE14.
    NOTE:I have data only in PSA and when im trying to load data to DSO Im facing these issues.

  • HT4589 How do I change the audio to dual mono from stereo when using Share to DVD in Final Cut 10.1?

    How do I switch the audio to Dual Mono from Stereo when using Share in Final Cut Pro 10.1? Even though the audio is all in dual mono in the timeline, it lists it as stereo in the share box.

    Hi rationale1,
    Welcome to the Support Communities!
    The share to DVD settings in Final Cut Pro X use the Dolby Digital settings which are stereo for DVDs. So this can’t be done directly in Final Cut Pro X.
    The link below will explain the Dolby Digital parameters and options in Compressor 4.   You may need to research a different DVD authoring software to achieve your desired result.
    Dolby Digital - Compressor 4 User Manual
    http://help.apple.com/compressor/mac/4.1/#cpsrb71736a2
    Dolby Digital
    The built-in Dolby Digital settings (in the Create Blu-ray and Create DVD destinations, as well as the built-in AC-3 and EC-3 audio settings) use the Dolby Digital transcoding format. This format encodes Dolby Digital (AC-3) and Dolby Digital Plus (EC-3) audio files that contain multiple audio channels, including 5.1 surround sound. You can also create custom settings that use the Dolby Digital transcoding format. 
    Note:  All files intended for video and audio DVD authoring must have a 48 kHz sample rate as required by the DVD specification.
    DVD Video: Choose this option if you’re encoding for use in a DVD video authoring application.
    DVD Audio: Choose this option if you’re encoding for use in a DVD audio authoring application.
    Tip:  For stereo encoding, rates of 192 kbps and 224 kbps are typical and will produce good results. For Dolby Digital 5.1 encoding, a rate of 384 kbps is recommended. For 5.1 Dolby Digital Plus encoding, a rate of 192 kbps is recommended.
    Cheers,
    Judy

  • How to change the NAT type to Open on a Imac using bridged connections

    Hey everyone I have a problem. I play xbox live with my friends and i just moved and dont have a wireless adapter anymore. so i have bridged connections with my imac and xbox via ethernet. It works perfectly, but the only problem is that when i connect it say that my NAT type is strict. To play with all my friends i need a open NAT type. Does anyone know how to make the NAT type on the Imac open. And i do have a D-link router model DIR-625. When i called D-link they said to port forward, i did and it still didnt work, they said it must be the fire wall on the mac, microsoft said the same thing, that it might be the fire wall. I checked the fire wall and it said "All Incoming connections are allowed".
    I would really much appreciate it if someone helped me. Thank you!

    Yes, most likely. Microsoft has provided a list of XBox LIVE!-compatible routers. Since the OS X Internet Sharing feature is limited, there is no way to configure port mapping or placing the XBox in a DMZ with it. Typically, you either use a compatible router or configure port mapping/DMZ for non-compatible routers.

  • I changed the home page and now every time I use firefox an add "browser settings change" appears and I can't close it.

    A pop up appears an I can't close it. Either selecting to keep my current settings or selecting I approve it.

    Please Update to the latest Firefox 19.0.x version.
    *Help > About Firefox
    *https://support.mozilla.org/kb/update-firefox-latest-version
    *https://support.mozilla.com/kb/Updating+Firefox
    The Firefox Firefox 18.0 version that you currently run is no longer supported with security updates
    Which security software (firewall, anti-virus) do you have?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Transaction type and account doc number

    hi,
    can any one let me know,
    in which screen i can find the transaction type and account document number for a given g/l account?
    Edited by: Ranjini cn on Sep 11, 2009 11:11 AM

    hi,
    you cannot have any transaction you can get this from the table only

  • Double-clicking a transparent vector shape pretends like it's going to let you change the fill type

    One thing that's irritating/confusing/non-intuitive about the new vector layers is that, if your vector layer has no fill, then double-clicking on the layer will bring up the controls for whatever type of fill you had before changing it to "no fill". That part is a bit confusing, but not too bad. The bigger problem is that, if you then try to change the fill from those controls, the vector shape remains unchanged after you click OK. So in other words, if my vector shape currently has no fill, and I double click it and select a new color from the color picker, obviously I want the shape to have that new color when I click OK, but instead nothing happens.
    For those who like to answer questions that were not asked , I am aware that you can (finally!) change the fill type by clicking the appropriate fill button in the Options bar. I'm not talking about that right now.
    I think the option to change the type of fill should be available in the color picker window, the gradient fill window, and the pattern fill window, so you can switch fill types on the fly.

    Thanks for the feedback.
    The best (and recommended) way to change the fill of a shape layer is to use the option bar panels for the vector tools. These are going to give you the best up-to-date shape layer controls.
    But we left in the legacy behavior of double-clicking on the layer thumbnail to change the fill options as a way of easing the transition to the new shape layers. We didn't make any changes to these dialogs or their overall behavior, which is why they don't allow you to change the fill type and why the layer appearance doesn't update if the fill is set to None in the options bar.

  • How to change the task type of bdoc in sap crm

    Dear CRM Experts,
    I am new to CRM. Want to know how to change the task type  of Bdoc from update to insert. I am gettind B doc error due to the reason that under object_task the entry is U , whereas i have to change it to I (insert).
    Pls provide deatil answer. Points will be given.
    Regards
    Rajat
    Edited by: Gurinder Pal Singh on Jul 21, 2011 10:17 AM

    Hello Rajat,
    Please provide us more information about the error you have and it's description so that we can help here arounfd here.
    thanks
    Willie

  • FAGLFLEXT table not updating Transaction type  and Trading Partner

    Hi,
    The document which i post is development system is posted to FAGLFLEXT table properly along with the transaction type and trading Partner; however in the quality and production the document is getting posted in the table FAGLFLEXT but the transaction type and Trading partner fields are not getting updated for these documents it is coming as blank.
    Please give us answer ASAP.
    Thanks,
    Anil.B

    Hi,
    I got it. Just ask BASIS to Open the QAS system client and delete all scenarios which was assigned in DEV and transported in to QAS system and reassigned itand saved in QAS system and then its worked. all fields are getting populated.
    Go to IMG Fin Acc (New) -> Fin Acc Global Setting (New) -> Ledgers -> Ledger -> Assign Scenario
    Thanks,
    Anil.B
    Edited by: SAP FICO on Nov 12, 2009 5:09 PM

  • I uploaded and edited my RAW image, clicked 'Save As', and changed the file type from .psed to .jpg.

    I edited my raw image in Photoshop CS6, selected 'Save As', and changed the file type from .psed to .jpg. I also selected 12 and large file when the window popped up, concluding my 'saving as'. My computer does not recognize the file type and won't open them. Can someone help me? Thanks!

    When naming files, stick to the letters of the ENGLISH alphabet, numbers and underscores.  Do not use illegal characters like apostrophes, commas, asterisks, ampersands, hatch or pound signs, diacritics or accented characters, slashes, etc.
    While the period (dot) is not an illegal character per se, your file names should have only one period and that should always be followed by the file type extension.
    EDITED typo: se
    Message was edited by: station_two

  • Hey i have a iphone 4s 64gb but and using the internet share .. how can i change the nat type from strict to open please help me :)

    hey i have a iphone 4s 64gb but and using the internet share .. how can i change the nat type from strict to open please help me

    You will have to configure that with your router. Type your router's IP address in the search/domain bar and allow port forwarding.
    What is requiring you to have an open NAT? That issue is usually for gaming consoles, etc.

  • Which transaction can  change the order type

    Dear friends,
    Please tell me the transaction code to change the ORDER TYPE.
    Regards

    Hi You can use <b>VOV8 </b>for single sale order change If you want mass change u can use <b>MASS </b>t code
    For Billing document you can use <b>VTFL</b>
    For Mass Change refer below
    There is transaction MASS which can be used to carry out mass changes in the sales order and other objects.
    Mass Maintenance: (Use to change multiple fields in multiple documents at the same time).  I have done mass change for customers; and orders should work the same way too.
    1) Try t-code [MASS] and select sales orders & execute
    2) Choose the table or tables for your selection criteria and also for fields you want to change.
    Then execute. (suppose your selection criteria fields are from "sales order header data" table and the field you want to change, is in "item data" table)
    3) Put in the sales documents(21000000, 21000001) you want to change and also the items(10) you want to change.
    - click on " choose selection fields" button
    - From the Pool, move the fields you want to the "select fields" using arrows.
    4)From mass maintenace menu, click on "Enter new field values"
    -click on "sales order item data" tab and choose the field you want to change.
    (for example. I want to change plant for item 10)
    -enter the new value (of the plant to be)
    -click on "Adopt" and execute
    5)In "sales order item data" tab, you see the new value of the plant you entered at the top and the old values of item 10 are below.
    -click on "change field values" button.  you see all the old values are changed to new values.
    -save
    Note:  it will take some time depending on how many records you have.
    Check:  Go to [SM37] and see the status of the job you are running and once finished, export the spool file to a spreadsheet.
    Before you do mass maintenance, go to the particular table in [se16] and get the results.  Then do the mass maintenance and compare the results with this one.  If they match, then you are good to go.
    Note:  If you have any user exits that affect the results, ask them to deactivate the MODCHECKS still you are done with mass maintenance & activate them again.

  • How to change the file type from IMOVIE PROJECT to other types of file

    how to change the file type from IMOVIE PROJECT to other types of file??
    thank you very much for your help=]

    I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
    Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed?

  • I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

    I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • HT201318 I registered my apple ID and Icloud with a US address, and live in Switzerland. I do not own a US credit card. Now that I need to buy more storage with my swiss credit card, I can't change the country's billing address from the US to my swiss one

    I registered my apple ID and Icloud with a US address, and live in Switzerland. I do not own a US credit card. Now that I need to buy more storage with my swiss credit card, I can't change the country's billing address from the US to my swiss one. HELP PLS?

    Did you actually watch the movie? You get 30 days in which to view it and if you didn't watch it, that could be why you are getting that message. If you have watched the movie and you're sure that is has expired by now, contact iTunes Store Support and seek their help.
    Change the country in the upper left. - and click on Purchases, billing and redemption to proceed.
    https://getsupport.apple.com/Issues.action

Maybe you are looking for