Change the Transport Directory.
Hi everybody, We have I system installed (S01) and we have just installed a new one (S02), we want to be able to trasnport from the system S01 to the system S02. What I have to do in order to do that?
I read that the systems have to have the same Transport Directory. And I checked with AL11 and the values for the DIR_TRANS parameter are the following for each system:
system S01 -> DIR_TRAN ->
S01\sapmnt\trans
system S02 -> DIR_TRAN ->
S02\sapmnt\trans
I tried to change the DIR_TRANS parameter with the transaction RZ10, but in S02 we don't have any profile.
Cuold you please help me to do that?
Thanks and Regards.
Hi,
read that the systems have to have the same Transport Directory.
not neccesary to have tarnsport directory, it depends upon scenario.
Pls follow the below link for configuring stms configuration.
bbs.cenet.org.cn/UploadImages/200581112435749207.pdf
Also check the below link
Common tranport directory on Windows local installation
Thanks,
Anil
Similar Messages
-
I want to change the transport directory
Hello gurus,
I want to change the tranport directory in all our systems. Please advise me how to do it.
I really appreciate your help.
Regards,
N.SHi N.S,
How about :
http://help.sap.com/saphelp_47x200/helpdata/en/d5/10b4496f0f11d2b41a006094b9ea64/frameset.htm
is it common transport directory ?
To change the common transport directory configuration, you can
first go to transaction AL11 of one of your system, for example, PRD.
Change the 'DIR_TRANS' parameter, so that it points to the directory that you want to change
Then go to STMS, choose 'System Overview' button to display systems
of your transport domain. Double click PRD, with 'Transport
Tool' tab, click 'Display <-> Change' button, you can change the
'transdir' value.
Please make sure it is equal to the same configuration of 'DIR_TRANS'.
Repeat the above steps on your other system. Make sure the configurations
of 'transdir' and 'DIR_TRANS' are the same as that on the PRD system.
cheers,
Vincent -
Change STMS transport directory
Hi gurus,
I have a High Availability SAP ERP system (SAP ECC 6.0) as PRD server. We used an old server for DEV system (Host name = sapdev). These two servers belonged to a STMS domain.
Recently we made homogeneous system copy and created a new Development (PRD copy) system to a new server. the new servers host name is AthinaDEV. We created a new STMS domain, joining the new DEV and PRD systems. The problem is that transport directory in PRD seams to be
sapdev\sapmnt\trans\ and in DEV seams to be
athinadev\sapmnt\trans\. In both servers in Transport Tool I have configured TRANSDIR as
athinadev\sapmnt\trans.
How can I change the transport directory to PRD to look
athinadev?
Thanks in advancedOK,
I added the profile parameter DIR_TRANS with the correct path to both systems and now both systems use
athinadev\sapmnt\trans as transport domain. All seems to be correct now (all checks return success) but I can't transfer any request.
For example: I have created a test ABAP program. I have created a request for that program. I released the request from SE11 transaction succesffully. But when I use STMS transaction I have the following situation: in import overview I can see both systmes and 1 request waiting. When I double click on PRD to enter to import queue the list is empty.
I have cheked the permissions on trans folder and seems to be ok (prdadm has corrrect permissions).
The two systems has connected with transport routes.
Can anyone help me find the solution? -
How to change the default directory from within SQL*Plus ?
Hello,
I want to change the default directory directly from within SQL*Plus to be able to launch my command files with simple instructions like :
@my_command.sql
If I haven't launched SQL*Plus from the directory containing the file my_command.sql, how do I change the default directory to the directory of my command files ?
I've searched through the Oracle documentation, there's no SET DEFAULTDIR or something like that. When I do a SHOW ALL, there's no variable containing the default directory.
If you have an idea...
regards,
Jérôme.Hi Jérôme (Jé²´me ?),
You cannot directly do that, but you can use @@ instead of @ to run subscripts in the same directory as the superscript
# head /tmp/tl30/xxx/[xyz].sql
==> /tmp/tl30/xxx/x.sql <==
prompt call y
@y
prompt call z
@@z
quit
==> /tmp/tl30/xxx/y.sql <==
prompt i am in y
==> /tmp/tl30/xxx/z.sql <==
prompt i am in z
# pwd
/root
# sqlplus -s scott/tiger@lsc62 @/tmp/tl30/xxx/x.sql
call y
SP2-0310: Datei "y.sql" konnte nicht geöffnet werden
call z
i am in zKind regards
Laurent Schneider
OCM DBA -
How to change the output directory of .xml files
Hi,
There are lots of .xml files generated under
$ORACLE_AS_HOME/j2ee/home/applications/xmlpserver/xmlpserver/xml.
(ex:/usb/bipub3/oracle/oc4j_bi/j2ee/home/applications/xmlpserver/xmlpserver/xml).
I found these files are generated in the following operation;
1.Log in BI Publisher.
2.Select the Schedules tab.
I think they are kind of temp files so we will be able to delete them.
But I'd like to know how to change the output directory.
Can we change the above directory to other path?
Regards.Why? As that may invalidate support since you configure/alter the deployment.
The location is specified in oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver.war, so you could go into the war file and alter it. -
Problem Changing the Root Directory of the Default Virtual Host in J2EE 7.0
Hi,
I'm trying to change the root directory for the default virtual host in J2EE 7.0.
i did the following steps in visual admin: services -> HTTP Provider -> Runtime -> Virtual Hosts -> default:
Root Directory: "D:/usr/sap/<server>/<instance>/j2ee/cluster/server0/apps/sap.com/crm~b2b/servlet_jsp/b2b/root/b2b" (this the correct path to the application)
Start Page:"z_index.jsp"
I restarted HTTP Provider Service and the J2EE.
When I start http://<server>:<port> i get the following error:
The requested resource /z_index.jsp is not available
Details: File [z_index.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].
sap.com/com.sap.engine.docs.examples is the initial default root directory, but i changed it to the correcht path...
Can anybody help me?
Yours
Michael
Message was edited by:
Michael CendonHi,
hqt200475 wrote:
Hi,
I have the Environemt:
+ Linux SUSE 11 + Oracle Enterprise 11.2.0.2
oracle@stb:~> uname -a
Linux stb 2.6.32.12-0.7-default #1 SMP 2010-05-20 11:14:20 +0200 x86_64 x86_64 x86_64 GNU/LinuxMy Problem is changing the home directory of an existing Standalone-ASM:
/u00/app/oracle/product/11.2.0/grid_1/I want to move it to
/u00/app/grid/product/11.2.0/grid_1/My Question: what is the optimal path?
Optimal Flexible Architecture standard
All Oracle components on the installation media are compliant with Optimal Flexible Architecture. This means, Oracle Universal Installer places Oracle Database components in directory locations, assigning the default permissions that follow Optimal Flexible Architecture guidelines.
Oracle recommends that you use Optimal Flexible Architecture, specially if the database will grow in size, or if you plan to have multiple databases.
/u00/app/oracle/product/11.2.0/grid_1 - Oracle home directory for Oracle Grid Infrastructure 11g for a standalone server, if user owner of installation is "oracle"
/u00/app/grid/product/11.2.0/grid_1 - Oracle home directory for Oracle Grid Infrastructure 11g for a standalone server, if user owner of installation is "grid"
http://download.oracle.com/docs/cd/E11882_01/install.112/e16763/appendix_ofa.htm
Hope this helps,
Levi Pereira -
How can I change the source directory in Netbeans
Hi there,
Thanks for reading.
How can I change the source directory in Netbeans so I can have a src directory?
Thanks,
LorenzoForgot to say Netbeans 3.6.
thanks -
Changeing the Transport request Attributes?
Hi Guys,
Can anybody tell me how to Change the Transport request Text , means while creating a Request u will enter the Description for Each request.Can anybody tell me how to change that description?
Very Urgent.
Thanks,
Gopi.HI,
You cannot change the text of a request if you are not the owner of that request..first change the owner of the request to your id and change the text.
Thanks
mahesh -
How do I change the extension directory?
I installed JBuilder and it changed my extension directory from the default:
JAVA_HOME\jre\lib\ext
to:
JBuilder8\jdk1.4\jre\lib\ext
how do I change it back?nevermind, found a solution:
uninstall the jdk and reinstall.
it sets it back to \jre\lib\ext
(there's still the question of how to change the extension directory arbitrarily, but i'm not going to lose sleep over it) -
Change the Transportation zone - No jurisdiction code could be determined
Dear All,
when trying to change the Transportation zone for the customer of Brazil ,
Error message comes as : No jurisdiction code could be determined
Message no. TAX_TXJCD101
Even you change a single character in the address any where e.g. Name, City, Postal code- The same message comes.
Please advice
Thanks in advance,
RanjanIn other words, your address is currently incorrect according to your tax jurisdiction determination.
You surely have a tax jurisdiction engine like Vertex and your Vertex (or other) database is not maintained properly.
As a result the determination, from the maintained element of the address, fails.
Or simply, your current address is incorrect according to your determination engine.
You may have a look to your settings in the customizing first.
SPRO / and start find engine with 'Tax Jurisdiction' as key word.
Feel free to provide points if useful. -
Changing the FileName & Directory of a mapping by updating the database .
Hi,
In one of the ETL tools which I have worked before ( constellar) , It was possible to change the filename & directory associated with a program/interface/mapping dynamically by simply updating the tables of database. Is that possible in OWB. ( anyway when we implemented we did that by changing the scheduler shell script ) , just because of curiosity I am raising this doubt ?.
regards
Ranjeeshselect PARAMETER_NAME, PARAMETER_VALUE
from ALL_RT_LOCATION_PARAMETERS
You can set the location however the file is stored in all_rt_objects in a clob. I don't know how the modify the filename in the clob dynamic.
NOTE the mentioned objects are views.
We have a data stucture (here a simplyfied example)
data /input <= any input file any name any version
/output
/process <= contains fixed name
a batch (call in OWF) copy from inp to process.
cheers,
D -
Cleaning Up the Transport Directory
Dear All
I want to clear the old files from the trans directory, for the same, i exectute the command on Dos prompt,in
Windows
in BIN folder
tp check all
it generate following error
tp version is :- 372.04.57 (release 700, unicode enabled)
kernel release 700
This is tp version 372.04.57 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
the Transport tool setting, the parameter
TRANSIDR is set
ides\sapmnt\trans &
DIR_TRANS value is
ides\sapmnt\trans
so please suggest me How to Cleaning Up the Transport
Directory
Thanks
GaneshHi Ganesh,
Please go through the below links.
Import of a request failing : ERROR: connect failed due to DbSL load lib fa
how to add request in the buffer
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/tp-finished-with-return-code-208-1433190
http://www.sapfans.com/forums/viewtopic.php?f=12&t=67602
Re: Import of a request failing : ERROR: connect failed due to DbSL load li
-Srini -
Easiest way to upload a transport file in the transport directory.
Hello all,
Do you know what is the procedure to upload a transport file in the transport directory in the process of manually installing OSS Notes?
Thanks in advance for your help,
LuisHi Luis,
Try to go through transaction SNOTE for that.
You can check also http://scn.sap.com/blogs/tyronemapp/2012/05/08/how-to-manually-import-transports-into-sap-without-using-command-line-tp , a nice blog post from Mapp Tyrone on the subject.
Take care,
Ricardo -
Changing the Transport Request of an Object(Report)
Hi,
By mistake I have saved one of my Custom Transaction Code( of a custom Report) under wrong Ttransport Request Number.
Could you please let me know the procedure to change the Transport Request number of any object like Report, TCode etc.
Regards,
NitinHello,
Delete that perticular object from the request.
And save that object again , so , system will ask you for the request again.
Regards,
Naimesh -
App Server Does not recognize the transport Directory
We have added a new server in the production system , but this server is not able to recognize the transport directory ,
In the instace profile , this parameter is set as below
DIR_TRANS =
bp1tulap139\sapmnt\trans
When i check the profile it throws a warning
W:DIR_TRANS directory
bp1tulap139\sapmnt\trans does not exist
Even the transport Directory
bp1tulap139\sapmnt\trans
is mounted on the server but still I am getting this error .
Please helpOh man - that is Windows Security basics.
I am wondering how people can try to install and administrate enterprise level applications without this knowledge.
you may try to create SAPSERVICE<SID> as a local user on the machine where the transport directory is stored on and give it the same password on this machine. After that add it to the local SAP_LocalAdmin group.
After that the access should work (if both servers are member of the same workgroup).
peter
Maybe you are looking for
-
IPhone 3G - email works in wifi; doesn't work over 3G or Edge
Anyone else experienced this problem? Since the middle of this past week, my iPhone 3G cannot send or receive email from my POP account over the 3G or EDGE network. It works fine over WiFi however. I took it to the Apple Store where they were able to
-
hi all!!!!!!! i have made one ALV report , with one pushbutton on application toolbar , whenever tht is clicked , PAI event is triggered and another LIST is displayed . This is performing as required . Now user wants , whenevr report is being exe
-
Is there any way to "resore" a previous backup, like from a different day?.....like a restore on my pc?????
-
hi. I have created a simple XML file which contains a hierarchical structure of strings. Also, I have created a SAXParser to read from the xml. But I don't know how to put this structure in a JTree.I don't want to show the tree on screen. I want to b
-
How do i copy imessages and sms onto icloud?
how do i copy imessages and sms on to icloud?