Change the volume image flags values

Hi
I am using Windows 8.1 Update and Windows ADK.
Without using the ImageX command, how do I change the volume image flags values displayed with the Dism /Get-ImageInfo /ImageFile:"<WIM_File_Path>\<WIM_Name.wim" /Index:<Image_Index> command?
Where are these values stored?
Thanks
Bye
Balubeto

Hello,
If you want change the value, you can use the command line (imagex) or one tools (Gimagex)
https://www.autoitscript.com/site/autoit-tools/gimagex/

Similar Messages

IWeb: changing the slideshow image scale and viewing time

I moved my iWeb sites over to another server (iPage) and went through the sites to observe for inconsistencies and problems. While doing this, I noted that my image galleries, when placed into the slides show mode, were very small on my iPad 2 and that they cycled through at a very high speed. I thought this was odd and I wondered if anyone else has observed the same thing? It sounds to me that an HTML under-the-hood modification may be required or a bug fix to the iWeb code is in order, to change the sideshow image scale and viewing time/slide value. Comments? [I suspect that Apple does not hold iWeb bug fixes at or near to the top of its software development to-does priority list. Sounds like I need to change web authoring software.]

Why do you think it's a bug?
Anyway :
Is there any reason photos in an album page display small on the iPad, but normally on an iMac? And videos on a movies page don't play on the iPad, but are OK on the iMac?
I use my own show :
http://home.wyodor.net/photo/

Is there a way to change the volume of a track in the middle of a song on iPhone?

I am writing some songs, but I don't know if I can change the volume of certain tracks during certain parts of the song. I know you can change them for the WHOLE THING, but I want to drop down the volume of the background instruments, so I can start the solos much better.

Hi this is said to be working but I haven't tested it:
if (sequencer instanceof Synthesizer)
     Synthesizer synthesizer = (Synthesizer)sequencer;
     MidiChannel[] channels = synthesizer.getChannels();
     // gain is a value between 0 and 1.
     for (int i=0; i<channels.length; i++)
          channels.controlChange(7, (int)(gain * 127.0));
Klint

I can't change the volume of the background music in my project even if I put it to 0%

I can't change the volume, I've tried to put it down with Itunes, stop and start again my computer but nothing work... PLEAAAAAASE HELP...

Solved it, there was a problem of the same music put it twice!

So in the last few days I've noticed that pressing my volume change keys actually isn't changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squar

So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
Please help!

You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379

How do I change the volume for a single midi instrument in GarageBand 10? Every time I move the volume, it moves back!

How do I change the volume for a single midi instrument in GarageBand 10? Every time I move the volume, it moves back!

Every time I move the volume, it moves back!
Check, if you have a volume automation set on the software instrument track.
If the track volume automation curve is enabled, the volume slider for the track will move with the automation curve.
Click the automation curves disclosure triangle in the track header and disable the volume automation.

Can you change the volume display at bottom of screen to the song time instead?

I have just bought a new Ipod Nano and really like it! The only problem I'm having is when playing songs the bottom of the screen shows the volume level rather than how far it is through the song in time (like the old nanos used to show). I find it really annoying not knowing at a quick glance how much more of a song is left to play.
I know this info is displayed by double tapping the screen (although it is only shown temporarily). Is there a way of changing the volume level icon at the bottom of the screen to display the song time instead?
Thanks in advance.

Is there a way of changing the volume level icon at the bottom of the screen to display the song time instead?
There is not. You can let Apple know how you feel about it using the form on this page.
http://www.apple.com/feedback/ipodnano.html
B-rock

I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

Hi
I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
TY!!!!

Kline25 wrote:
So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
Apple does not repair devices beyond replacing the screen on some models or a battery replacement. They replace the ENTIRE device.
For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device. Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
Apple will not touch the device now. They will know that it was opened elsewhere and that the replacement screen is not original.

The icon when i change the volume up or down is no longer the beats logo, it is a simple megaphone.

1. HP Pavilion m6 Notebook PC
2. Windows 7 64 bit
3. none
4. I accidentally deleted IDT Audio, i was trying to get rid of programs that i didnt need, i didnt know this controlled beats.
i noticed that my Beats Audio Control Panel was gone and i searched online and found out i needed to re-download IDT, so i did. Beats Audio Control Panel is now back but when i change the volume up, down, or off, it shows an ugly little megaphone icon and ugly little white bars, instead of the shiny silver beats logo and the silver bars. I hate the new logo with the mega phone how can i get the beats logo back?
i tried a system restore from before i uninstalled IDT but it still has the same problem.
Please reply with any ideas

Hi,
Try reinstalling the HP OSD Utility on the following link.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55152.exe
After this has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hey! recently my key board settings has changed and now my volume buttons are no longer F10 and F11, now if i want to change the volume i have to do it on the top bar of the screen! how do i change it back to work normally on my wireless keyboard?

Hey! recently my key board settings has changed and now my volume buttons are no longer F10 and F11, now if i want to change the volume i have to do it on the top bar of the screen! how do i change it back to work normally on my wireless keyboard?

Hi, did you upgrade the OS lately?
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php

How to change the manual condition type value in change sales order BAPI

Hi All,
My scenario here is, i want to either add/change the manual condition type value during change of SO.
When i'm trying to pass the order_conditions_in and order_conditions_inx tables in 'BAPI_SALESORDER_CHANGE'.
Condition type is coming at item level but the value is setting to zero. Pls. help if anyone has any idea how to handle this.

Siva,
I guess you posted in Wrong Thread. You need to post in WAS section.
check for any BAPI's available in CRM.
Nagesh Ganisetti.

Create one button to change the background image

Hello,
can anyone help me create a button for a SPA525g phone which changes the background image of the phone which is now :
<BMP_Picture_Download_URL group="User/Screen">http://192.168.2.2:5000/provisioning/logo/cisco525g.jpg</BMP_Picture_Download_URL>
The button should also call to *1232
So with button IN the image should change to ciscoOUT.jpg and call to *1232
And button OUT should change the image to ciscoIN.jpg and call to *1231
I now have already
<PSK_1 group="Phone/Programmable_Softkeys">fnc=sd;ext=*[email protected];vid=20;nme=IN</PSK_1>
I also tried to do :
<PSK_3 group="Phone/Programmable_Softkeys">fnc=xml;url=http://192.168.2.2:5000/provisioning/logo/cisco_logo.xml;nme=scrp1</PSK_3>
where cisco_logo.xml contains :
<?xml version="1.0" encoding="utf-8"?>
<CiscoIPPhoneImageFile>
<Title>Image1</Title>
<Prompt>Prompt1</Prompt>
<LocationX>0</LocationX>
<LocationY>0</LocationY>
<URL>http://192.168.2.2:5000/provisioning/logo/cisco50xg.bmp</URL>
</CiscoIPPhoneImageFile>
but then nothing happens ? I can see the image and choose update , but that is it.
Plus I want to combine the two option.

anyone who can help me out here ??

Can I change the volume of songs in a playlist without permanently changing file?

I'm making playlists and sometimes the songs have a very different volume. It doesn't matter when you play a whole album but the contrast of loud and quiet in a playlist can be jarring.
If I burn the playlist to a disk I can apply the "Soundcheck" that helps. But what can I do if I just play off my computer?
I don't want permanantly to change the volumes because then the songs would sound funny when played out of the playlist.
Any easy solutions?
I'm using iTunes 10.6.1 on an iMac running OS X 10.6.8
Thanks

Any easy solutions?
No. You can't have a "special" volume adjustment for use in a playlist.
tt2

Computer Lags changing the volume

Any time I want to change the volume with the keys on my bluetooth keyboard, it seems that there is a significant lag bringing up the volume box on the screen that shows the volume level.
Once it's up, I can go up / down anything rather quickly.
Just a little annoying if something starts to play in the middle of the night a little louder than you anticipated and it takes a good 5 seconds after hitting the volume down for it to start going down.
When I first got the Mini, I had no problems....so, I'm trying to figure out where the problem is. Memory issue?
Intel Mac Mini 1.66Ghz, On 10.4.10. Bluetooth wireless keyboard.
Any help is appreciated!
Thanks!

Sorted problem now

While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and slide the scrub through songs. This has always worked for me until now. I have not changed any settings

While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and scrub through songs. This has always worked for me until now. As far as i know, i have not changed any settings. This is whle my phone is locked both on the slide up toolbar/menu interface and on the normal screen before i slide to unlock.

I skimmed through this very long post but from what I read, this sounds much more like a coverage issue with your network than a device issue. I have not seen or heard of this issue before and I do not have this issue personnally and & I use the music app quite frequently while working in the yard.
The DND feature should not be a factor at all if you're sure it's turned off. I always recommend restarting your phone by holding down the home button + the lock button for 10-12 seconds until the Apple logo appears. Once the phone reboots, do a test to see if this has helped to resolve the issue.
If not, go to Settings > General > Reset > Reset Network Settings. Then, test it out again. Post back if neither of these solutions solve your issue.

Change the volume image flags values

Similar Messages

Maybe you are looking for