Change time outs / delays on Zen Touch interfa

I think it would be a good idea if the timings in the interface could be changed...
How long before the menus exit and go back to the 'Now Playing' screen.
scroll speed, and how long before text starts scrolling.
I get the 'Now Playing' screen, before some of the entries have had time to scroll so I can read the title, hence wanting to change the timings.
It's something that might be possible to put in a future firmware update perhaps?Message Edited by RickDawson on 0-0-2005 07:57 PM

I completely agree, and something that could be offered across all the players.

Similar Messages

Change Timer Class Delay time

Is it possible to update the Timer Class Delay time while it
is running. I want to update it using the slider component however
it doesn't seem to update. I even stop the timer on the THUMB_PRESS
event of the slider that restart it after it is changed. Doesn't
seem to work that way either. Any Ideas?

I figured it out. Instead of setting a variable speed in the
event handler function for the slider I direclty changed the timer
delay variable to equal the slider value. I feel dumb now but it
works great.

How to change time out settings in Analytic Provider Service...

... or how to disable automatic disconnect between APS and essbase server (using XMLA interface).
First a short summary:
We would like to use a third party product to analyze data (DeltaMaster from Bissantz). This product uses the XMLA interface provided by Analytic Provider Service. Mostly the connection works, I can choose one of our cubes, sometimes a drill down is possible, but sometimes the following error occurs:
"Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: (1042006): Network Error [10061] Unable To Connect To [entwgdw.hres.de:33769]. The client timed out waiting to connect to the Essbase Agent using TCP/IP. Check youer network connections. Also please make sure that Server and Port values are correct [...]"
I have already talked to the Bissantz support concerning this issue and the recommended me to increase the APS time out settings and/or to disable the automatic disconnect between APS and essbase server after every query.
The question is: Is this possible and if yes: How and where can I change these settings???
Kind regards
André

You could look at updating the essbase.properties file in the APS installation directory.
olap.server.netRetryCount=600
olap.server.netConnectRetry=3
olap.server.netDelay=200
olap.server.netSocketTimeOut=200
Update then restart APS
Though this might not be the issue if on windows, it may be down to the amount of ports being used, have a read [here |http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html ] for a possible fix.
Cheers
John
http://john-goodwin.blogspot.com/

Hammer USB HD timing out. How to change time out value?

Hi:
My new Hammer USB 500 Gig portable hard drive does not mount. USB probe log gives these error message:
33.929 [1] AppleUSBEHCI[0x177d800]::Found a transaction which hasn't moved in 5 seconds on bus 91, timing out!
68.941 [3] AppleUSBHub[0x17a4400]::TimeoutOccurred error
The drive mounts on an iMac running Mac OS X 10.5, but neither Finder nor Disk Utility can see the drive on my Powerbook running 10.4.11.
Hammer tech help says the drive takes as much as 7 minutes to mount. I did notice that it took some time on the iMac.
Any ideas? Can I change the time out constant somehow?
By the way the drive requires more than 500 miliamps to start up. I have a double USB cable that does bring the drive up, but my Powerbook won't mount it.
Thanks,
Carl Carlson

Hi Carl, and a warm welcome to the forums!
Self powered USB drives are a big problem, I think the only answer is a Powered USB Hub.

Changing time-out for scheduled data refresh

Using a Power Query connection, is it possible to extend the time-out time for scheduled data refreshes? The amount of data to be retrieved is rather limited, but there's thousands of rows (NAV server).
If not, any suggestions to how to reduce latency?
Thanks.

Thorm,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Best Time to Recharge the Zen Touch Batt

I was just wondering what the best time is to recharge my zne touch's battery. I have heard from some that I should wait until it gets as low as possible without having it be fully discharged is the best way to go, and others recommend partial charges. So, overall, how many bars should be left on the battery indicator when i recharge to get the longest life out of my battery?

Partial charges are better, although I can't give you a value to recharge at.
But honestly, I wouldn't worry too much about it. Just enjoy using your player and charge when convenient as the Lithium Ion batteries are pretty tough.
The only thing to watch though is not to leave the battery flat for several weeks, as the voltage can drop below the detectable voltage for a charge.

Change time out period

Hi all.
SRM 4.0.
How long does the SRM have to be inactive before the user is logged off - and how can this time be changed?

Hi,
You can make the settings on SPRO--> SRM > SRM SERVER> TECHNICAL SETTINGS> SET CONTROL PARAMETERS> SPOOL_LEAD_INTERVALL--> define the timings.
Award the points for help.
BR,
Vijay Mittal

URLConnection Time outs

I get the following exception:
java.net.SocketException: Connection reset
I am using URLConnection object in my client program
to talk to server. Most of the time it works fine but
sometime I get the above Error because this server sometimes is
very slow to respond back. The connection times out.
Can you please urgently help, how to override or change the bulit in time out delay so that I can make it to wait much longer before
timing out?
Please help asap. thanks!
Erin

This page has a rather lengthy solution. Looks like very little changes to your existing code but a few new classes must be created. Then you can use them when you create your URL object ( just before creating your URL connection).
Best of all, its open source :)

Creative zen touch Major prob

I tried allof this ----->Creative Zen Firewire / USB 2.0 / Zen NX / Zen Xtra / Zen Touch
Ensure that the Jukebox Zen is turned off. Hold down the Play/Pause button and insert a paper clip into the Reset hole on the Jukebox Zen. Remove the paper clip from the Reset hole. The Jukebox Zen will enter the Recovery (Rescue) Mode (release the play/pause button) and the following options will be displayed:
).Clean Up (Performs a disk scan on the players harddisk)
2).Format All (Formats the players harddisk - Note: all contents will be lost)
3).Reload OS (Reloads the Operating System on the Jukebox. Note: Reloading your OS, will not effect the contents of the files stored on your Jukebox Zen)
4).Reboot (Reboots the device).
and it did not work,
the problem happened when i was playing music, i then paused it and turned it off, and it froze on the ( shutting down ... ) screen
and cant get it from that, this happened with my zen extra lots of times, and my mates zen touch..........
i've spent 300 euro on this and this has happened before, so it be really good if you can help me?

it wont work any of the steps, i tried holding the pause/play button and then inserting a clip and it wont work

just stays on the Shutting down ... screen

i've had one of these before and it didn't work, im a jinx with electrical equipment , jk

but with zen touch is the battery able to be lifted out? it says warranty void if i open something up, not sure which, so i haven't tried anything
could the re set switch be damaged?

PLEASE, PLEASE HELP: Big problems with my Zen Touch. (Firmware/driver issu

So here's the deal:
Last night I thought I'd finally take the time to upgrade my Zen Touch to 2. from .3 or something like that. I noticed that there was a warning saying that this was no small upgrade, and that I should back up everything I have on it.
I'm glad I did, because now my MP3 player situation is seriously screwed up, big time. During the upgrade process, my computer froze, leaving my Zen Touch without firmware (ok, so firmware version 0.0.0). Upon turning the device on, it boots up in recovery mode. This allows me to either format, clean up, or "reupload" firmware. I've tried all of these options, but the fact is clear that my computer simply will no longer recognize my MP3 player.
It does, however, recognize it at as a generic storage device. However, this isn't enough for me to reinstall the player's firmware unfortunately.
So basically, I can't update driver or firmware right now, because my computer won't acknowlege my Zen Touch!
Somebody please, please help.
I've already tried using the setup file from http://www.jumpingcholla.com/jce_nomad_ZEN.htm.
Seriously, please help!

Sort of success!
I now finally have firmware 2. installed on my Zen Touch! Yeah! I'm not entirely sure how I did it, and I'm not bothering to find out, I'm just glad I finally got it on there.
But some problems still remain. After all this fiddling with my driver and firmware and whatnot, my computer just doesn't see my MP3 the same way as it used to. Before, it was great, all I had to do was plug her in and I could bring up Zen Explorer in Windows Explorer, or organize my stuff in Creative MediaSource.
Now that's not the case. The only way I can sort of add stuff to my player now is by going into Windows Explorer, which is still more or less acknowleging my player as a "portable device". Granted, there is a dri've called "My Zen", but it doesn't bring up Zen Explorer like it used to when I click on it. Furthermore, when I go into MediaSource, I can't select it as a location, there just isn't anything there.
It almost seems as if my computer thinks I'm just using a portable hard dri've. Is there anyway I can tell it that it's an MP3 player, too?
Thanks!

Zen Touch Carrying C

I love my Zen Touch, but one thing that really bugs me is the included case. Don't get me wrong. I think the case is pretty well made, but whose idea was it to cover the dang display and all of the buttons. This essentially makes it only good for transporting the Zen. I don't know about you, but I want a case that I can actually leave on for full time proctection. Once you take it out of the case, you're left with a slippery little player with absolutely no protection. Problem is, you "have" to take it out of the case to work the controls. Makes no sense to me.
Vaja (vajacases.com) has the right idea. They sell a beautiful leather case for the Zen Touch, complete with cut outs for all of the controls. But I don't exactly want to spend $60.00 and wait four weeks for a case. Besides, they only have one for the 20GB Zen. I have the 40GB version. I've done a lot of searching. As far as I know, no other company makes a case for the Zen Touch.
So now I'm left with this stupid case I have to keep removing everytime I want to play my Zen. Real smart Creative. If you had to give us this lousy case, you could at least sell a better one as an optional accessory.Message Edited by sube586 on 02-05-2005 06:57 AM

Yes,
The case for the Zen Touch isn't all that great as far as the aspect of use on the go. However, it better than nothing and does serve it's purpose. I guess it would have cost the company more to manufacture cases that were specially cut out for the Zen Touch. I am hoping that there will be some third-party cases made for the Zen Touch, but until then I guess you have to be happy with what you get.
I am not sure if I am correct, but don't the 40GB and 20Gb Zen Touch have aproximatly the same dimensions?
Message Edited by Coolrulez on 02-05-2005 04:26 AM

Time out error in F.13

Hi ,
We are getting time out errror in F.13
Please see below screen shot.
Please help me in sorting this out.

Execute in background, or process less records thru selection inputs.
NB: Even if Basis increment the time out delay, you would one day or another trigger another time out, and during this time, every time an user forget to input selections in some report, the system will wait some hours before aborting their request (if not run out of memory of course) - remember, this already happened, the default value is 600 (10mn) and basis has already increased it to 3600 (1h)...
Regards,
Raymond

How to get Zen Touch to work on Windows Vista without PFS (worked!)

CHow to get Zen Touch to work on Windows Vista without PFS (worked!)? ***THIS WORKED***
For all of you that want to get their music out of the Zen touch, and are stuck with Vista and .0.03 firmware (non vista recognisable), and don't want to erase everything by installing the latest firmware, here is what worked for me:
)Uninstall every piece of Touch software you got and reboot.
2) Download the latest drivers from Creative: JB3MV2...exe, together with the latest Nomad explorer, and the latest Notmad explorer from Red Chair (a trial is enough, version 9.0.3 currently).
3) Right click the driver, properties, go to compatibility mode, and select Windows XP SP2. Make sure your Zen is unplugged (worked for me that way). Right click the driver installer again and Run as Administrator. It hanged around 72% for me, no biggy, open your task manager and shut the installer off.
4)Before rebooting, install Notmad explorer.(I installed only the Zen touch part of it. I tried to run it right away but got a 'cannot find explorer.exe error - again, no biggy).
5) Reboot, plug in your Zen. Again for me, Notmad didn't work. This is what worked: Without messing up anything, install Nomad Explorer by Creative on top of it all, and reboot again.
6) After reboot, with your Zen still plugged in, right click the little Notmad icon on the right part of the taskbar and select 'Connect Jukebox Zen'. And voila, check your explorer, it should hopefully recognise the Zen Touch like windows xp would.
If you still run into trouble, just install stuff from the beggining, making sure Compatibility: WinXP SP2 and Run as Admin are used everywhere, and keep rebooting till it hopefully works.
Best of luck. edit: Using Winamp to transfer files worked as well.

Hi D2xS-Shooter,
I am afraid Creative Cloud desktop app is not compatible with Windows Vista. If you run into problems there are very limited resources from Adobe to assist.
Creative Cloud is a collection of apps with various different tech specs
http://www.adobe.com/uk/products/creativecloud/tech-specs.html
Thanks!
Eshant

Zen Touch 40GB and Windows Vista

Hi-
Apologies for opening a new thread,I can see there have been others on the same subject but cannot make head nor tail of them from the search function.
I have a 40GB Zen touch thats nearly full,I love it,its the best device I've ever had or ever will,can't speak more highly of it but my Windows XP laptop is gone , and the new one came with Vista .
Can anyone tell me how I can either add more music? or even get Vista to recognise my device. I cannot find a driver or software anywhere that will work. so I cannot add anymore new music or even get access to what I already have
thanks
redgav

$A longer-term, but one-time solution for the Zen Touch, Xtra & Micro (and a few, but not most, Sleeks & MicroPhotos) with original Creative PDE drivers and .x.x firmware (read the FAQs for more details):
Find a PC with Windows XP (SP2 or higher) and WMP 0 (not 9, not ). Download & install the Creative PDE drivers from this site. Connect your player. Backup any irreplaceable files to the PC (the next step will reformat your player). Download & install the "PlaysForSure" firmware update (2.x.x) from this site. Restore any files you backed up in step 5. Disconnect your player & uninstall the PDE drivers.<This will update your player to MTP (aka PlaysForSure), which is nati'vely supported in Windows XP (with WMP 0 or ), Vista & 7 without any additional drivers. (MTP drivers are also available from this site for certain older versions of Windows.) WMA DRM files can be transferred via WMP; other files can be transferred using WMP, Windows Explorer, or MTP/PlaysForSure-updated Creative software from this site.
The other post describes a kludge someone used to get an older Zen (with only PDE firmware) to work with Vista; it may or may not work. Creative does not support PDE-firmware players in Vista or 7.

Zen Touch File Transfer/Software iss

First, the nitty gritty:
I'm running Windows XP
MediaSource version 3.30.2Firmware version .0.03
In the beginning... I decided I wanted to upgrade my software and firmware to the PlaysForSure versions. The details of the program information said to be sure to backup all of my music seeing as how everything would be deleted during the installation process so I hooked up my 40G Zen Touch to my new laptop, opened up the MediaSource Organizer, adjusted the library settings to drop the music files into an Artist/Album tier and have the file with just the song title. I selected all 8700-some-odd files and began the process of transferring everything onto my laptop. I made sure there was plenty of space for all the files, but not long into the "B's" I started getting the error message: "Error: Unable to read file. File may be in use or corrupted". From that point on I could no longer transfer any files to my computer. I deleted the rest of the que, unplugged the device and took a look at the library. For every file that hit an error it would still drop a file with the track name into a folder of the album within a folder of the artist name - but the actual file was empty, no Kbs. From there I made sure I had the newest and most recent upgrades and plugins (prior to PlayForSure) to fix any bugs. I deleted all the transferred files and started over - again, in the "B's" I got the same message. I repeated this on a different computer with the same results. Once I get the error none of my songs will transfer.
Any suggestions would be most appreciated!
-p-

Here's the thing - we started out as friends, Zen Touch and I...
I double-checked the software and plug-in versions to make sure I had the most current. I attached the device and opened WMP. I can't figure out how to take files from the Zen Touch and put them on to my PC library. I need to transfer my entire cache of music from my Zen to the computer. And I just now realized that when trying to use the MediaSource Organizer earlier it put a file on my computer with the folder name "Man.." and I can't delete it. I'm pretty sure it has something to do with the fact that the file name contains two periods - I can't rename the file either, all I get when I try is an error that says "cannot delete: cannot read from the source file or disk". This is getting quite frustrating. More likely than not I don't need the new PlaysForSure upgrade but ) I cannot stand not having the latest upgrade and 2) I need to be able to transfer files easily between the device and my comp, which I was able to do until recently. Again, I beg the techno powers that be - HELP!

Change time outs / delays on Zen Touch interfa

Similar Messages

Maybe you are looking for