Change "to equal" to "to be greater than" in Wait for Field to equal Value"

In Sharepoint Designer 2010, in the workflow Action "Wait for Field to equal Value", I could change the "to equal" to "to be greater than". I can't find how to do this in SPD 2013.
Can someone please help?
Thank you!

Hi
PieterVanHeerden, is a big problem that gives us the change Microsoft . An option to mitigate this problem could be to use an additional workflow that runs whenever the item is updated . Workflow evaluate the condition that you need and when it is Ok, updates
the value of a field used as flag called eg " Control_Hora_Inicio_Completo " with " true " value.
In your current workflow you should modify the condition for the WorkflowF stops until the Control_Hora_Inicio_Completo field equal to " True " when it meets the Workflow continue and you're sure you have entered a value , whatever that is .
I hope you can try and you work.
Greetings from Argentina .
Maxi
Msorli

Similar Messages

Wait for field to equal to value not working in Sharepoint desginer 2013

Hi ,
I have two Work flow
WF1 & WF2
In below image WF2 it will update a list column where WF1 work flow In Progress
In WF1
It wait for Other Task Parallel value equal to started.
WF2 Update the list correctly but WF1 not work properly but
when I update list Item then it works fine for WF1 .
Please let me know if any thing wrong.
Regards
Sachin

Hi cameron,
We have two list as mention below
Agent list -Attach WF1
Task list-Attach WF2
WF1 one wait for action change column value from WF2
WF2 update a column value as show in fig above perfectly fine, where WF1 in waiting state to get the status.
but status is already updated.
When I have edit the same item in which WF2 update its column value then my WF1 working fine for " wait for Other Task Parallel value equal to started" action in my Agent list.
Regards
Sachin

Workflow - Wait for field change

Hi All,
I am just starting to experiment with sharepoint 2013 (in office365) workflows and am running into an issue.
What I am trying to create is a sort of approval workflow in which multiple people need to approve the item. I created a column for each department that needs to approve the item and the default value for the column is 'awaiting approval'.
So the first department gets an email that they need to approve or deny the item. I want the workflow to wait for the value 'awaiting approval' gets changed and if it changes to deny stop the workflow, else go to the next department.
The problem is that 'wait for field change' does not seem to do the trick. I can tell it to wait for the field to change to approved, but if it is denied it won't go further to the denied state.
I guess there is a trick for this but I can't find it. Any ideas?
Thanks in advance,
Eddy

I'm not sure wait for field change will work. This action requires you to wait until it equals a specific value, rather than just for the field to change. So if you want approve or deny, this won't work because you can only wait for it to be approved or
wait for it to be denied, not both. Basically, just as you say.
I would just have stages ("Awaiting Department 1", "Awaiting Department 2", etc) that is a hidden choice field set by the workflow. Choice fields then for each department for their approval. Conditions on the workflow fire based on the Awaiting Department
field.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

SPD Workflow executing twice on Wait for field change

I have a workflow where I have a Wait for field change action. Once the field is changed it sends an email. But it also goes back through the whole workflow again. So it sends 2 emails. How do I correct?
The workflow is set to run on item created and item changed.

I'm not sure wait for field change will work. This action requires you to wait until it equals a specific value, rather than just for the field to change. So if you want approve or deny, this won't work because you can only wait for it to be approved or
wait for it to be denied, not both. Basically, just as you say.
I would just have stages ("Awaiting Department 1", "Awaiting Department 2", etc) that is a hidden choice field set by the workflow. Choice fields then for each department for their approval. Conditions on the workflow fire based on the Awaiting Department
field.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

I am using ITC Mobile for iBooks. What is the difference between "Units" and "Total". Sometimes Units is greater than Total, other times Total is greater than Units, and sometimes they are equal. I am so confused.

Any help would be appreciated

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Can I change an iPod Touch 4G has more than one year for a 5G or it cheaper?

I have an iPod Touch 4G for over a year, and I wonder if I can have the 4G or 5G changing me out cheaper.

Apple will only give you a 10% recycling discount if you turn in an old iPod when you purchase a new one. Better off selling it yourself.
Apple - Recycling Program for iPod and Mobile Phones

Are there symbols for greater than or equal, less than or equal?

Hi,
I have occasional references that mention things like "Adjust the Kd pot until the voltage is <= 2.0 v" or "Turn the screw until the clearance is => .005 inch."
<= means less than or equal to.
=> means greater than or equal to.
I looked the the installed Character Sets PDF file and could not find these symbols. Is there an ASCII or ANSI code or a special font that has these items as a single symbol?
Yours,
Michael F
========

If you're using a FM8 or greater than you should use the Unicode values for these symbols:
<= is /u2264
>= is /u2265
However, the font that you are using must contain the glyphs in these code points.
With the ANSI Symbol and Dingbats sets, these symbols were coded at:
0163 (\xa3) (ctrl-q #) less than or equal to
0179 (\xb3) (ctrl-q 3) greater than or equal to

MRTG Out Greater than In

Hello Net Pros,
I have configured a MRTG system to give me the traffic analysis of my AS5350 Gateway's serial WAN Interface. Now in my graph the "Current In" value displayed is always smaller than the "Current Out". The same is for "Average" and "Max" values. Also I have configured the codec "g729r8" and all the originating calls coming in from our carriers to our terminating gateway [AS5350] are using this codec. If I multiply the "Number of DS0s in Use" with the average bandwidth consumed by one call using "g729r8" i.e. 12.8 kbps then this calculated value never matches the traffic analysis shown for the serial WAN interface. We had access-lists on the AS5350 Gateway. We tried removing the access-lists, but no improvement. Still the same result. What I am not able to understand is a] why my Out is always greater than my In and b] why the values shown in the traffic analysis for the serial WAN interface never match the value for the total bandwidth consumed by the active calls [using codec g729r8].
Could someone try to help me diagnose this problem??
Rushabh

hi Rushabh
i have same problem on my MRTG
but 1st of all the codec g729 is around 20 to 22k
so if u do the math the bandwidth calculation will be ok
now for the up is greater than the down this is due to codec so dont worry ,try to change the codec and u will see the change
this is nothing to be worried about
realy u dont have any problem
Fadi

Unable to process payload greater than 20MB

We have a SOA system,in which a third party system hits the end point URI exposed by proxy service in OSB. Initially it holds good for 10MB of payload size.
After a while we need to process payloads greater than 10MB. In such situation we did some configuration changes on server side as mentioned below
servers-->soa_server1-->protocols-->maximum Message Size = 20000000(20MB)
servers-->osb_server1-->protocols-->maximum Message Size = 20000000. (20MB)
It works well and good for payload size upto 20MB.
Now we are in a situation to process payload size greater than 20MB. For eg. some 25MB we again changed the above parameters values
servers-->soa_server1-->protocols-->maximum Message Size = 30000000(30MB)
servers-->osb_server1-->protocols-->maximum Message Size = 30000000. (30MB)
When we hit the end point URI with third party system using payload size greater than 20MB, it throws java.net.SocketTimeoutException:Read Time out
Kindly suggest
Regards
Ganesh S

You have to:
1. create 3 GPOs, assign every GPO one of the PCS MSI's
2. Assign the GPO's to appropriate OU(s) using Group Policy Management snap-in
3. Clicking on the OU name in Group Policy Management snap-in reveals list of assigned GPOs to the OU where the list shows the sequence of applied GPOs. The higher number, the earlier execution of respective GPO. You can manage the order using arrow icons on the left of the right pane.
Besides, GPOs does not appear in the Add/remove control panel, it is the MSI uninstaller information that is being shown. If everything is installed well, it should appear in the add/remove window. De-installation is possible to commmit using GPO removal from OU (preferred way) OR manual de-installation at local computer (in case where GPO was configured not to remove SW package from computers upon GPO removal from OU)

Greater than operator for obiee analysis

Hi ALL,
Just want to ask if it is possible to use date for the greater than operator in creating obiee analysis?
for example: I want to get months greater than January 2015 for specific measure.
Thanks in advance

but I'm using Oracle 9i r2
The question is why greter than, lesser than, does not workWorks on 9.2.0.8:
SQL> select * from v$version where rownum = 1
BANNER
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
1 row selected.
SQL> with mydata as
   select xmltype('<Values><Value>data1</Value><Value>data2</Value></Values>') MyXmlColumn from dual
select * from mydata t where existsNode(t.MyXmlColumn, '/Values/Value') < 3
MYXMLCOLUMN
<Values>
<Value>data1</Value>
<Value>data2</Value>
</Values>
1 row selected.

Time values that add up to greater than 24 hours

Hi Apple SUpport Community,
I am trying to get a cell in Numbers to return a TIME value when the sum of two time values are greater than 24.
For example, if a worker has a shift that starts at 8pm and works for 6 hours and 15 minutes, the shift ends at ((20:00+06:15=26:15)-24:00)=02:15am the next day.
If I formulate a cell in numbers to add to time values, it comes return the nasty red triangle saying "The Formula's arguments can only contain one date value"
Thanks in advance for any help!
ST

a duration can be obtained by subtracting two time values (which are technically the date and the time). durations are specified as:
weeks, days, hours, minutes, seconds and milliseconds.
I do not know what you are trying to figure out...
- how long did the worker work? or
- when did the shift end?
can you state a question (without regard for the solution) so we can assist? Also a screen shot of what you enter and what you want as output would be helpful.
All that said you can subtract two times to get a duration. You can add durations to get another duration. You cannot add times. To specify that an entry is a time you enter in the format "0w 0d 30h 14m 22s 0ms" any of the entries with 0 may be omitted.
you can add durations in cells by using the "+" or "-" operator
as in A1-B1
where A1 contains "3h 45m" and B1 contains "1h 15m"
the result will be "2h 30m"

SapScript - Print table out_par - more than one entry for object

Hi Gurus,
following problem.
I have a SapScript form and call an external program from within the form.
In this programm I get more than one entry for the same out_par-value - this is correct.
My problem now is that on the form there is only printed one of the entrys.
Here my coding in SapScript.
/:           DEFINE &ZZ_OBJECT& = '        '
/:           PERFORM LESEN_OBJEKTLIST IN PROGRAM ZIHFORM
/:           USING &CAUFVD-AUFNR&
/:           CHANGING &ZZ_OBJECT&
/:           ENDPERFORM
*           All involved object:
*           &ZZ_OBJECT&
Many thanks in advance for your help.
Regards

In Sapscript PERFORM-ENDPERFORM statements, the parameters can contain only one value as they are variables of type character & length 80.
If you want multiple values in your CHANGING parameters, fetch all of them in different variables. Also, in your program store them in the same order, in the output internal table of structure ITCSY.
Check this thread
http://wiki.sdn.sap.com/wiki/display/profile/ExternalSubroutinesinSAPScript

HT1386 when i try to sync my ipod touch - get message waiting for changes to be applied- i have just uploaded latest version of ios on toch & pc

just turned ipod touch- 32g on- stared to download latest ver ios 6.1.3
downloaded latest vers of itunes for pc
put new music into itunes ready for sync
when I try to sync ( mp3 )f- the message advises waiting for changes to be applied - no sync - any help please

See:
"Waiting for changes to be applied": Apple Support Communities

How do I disallow negative numbers in a selected group of cells (i.e. only allow values greater than or equal to zero)?

I have a table of calculated values in Numbers, and I want to disallow negative numbers in the entire table. Any numbers that would be negative I would like changed to/displayed as zeroes, that way future calculations that may be based on this cell use the value of 0 for the calculation rather than the negative value. I have seen ways of doing this to single cells at a time, but I am interested in applying it to a large selection of cells.
There is the Conditional Format option when you bring up the inspector, but I cannot get a custom rule to work for me. I select "Greater than or equal to" and I enter 0 in the box, but nothing changes. Can anyone help with this?
Thanks

A step toward simplifying the application of MAX to the issue, Jerry.
This part, though:
Now apply your long, animal-modeling, expressions to this new, interposing, table rather than the original.
may still leave several references to be change from the original data table to the new one.
One way to get around that is to use the Duplicate ("DATA-1) as the new table for raw data, and the Original (DATA) as the interposing table, using the formula =MAX(DATA-1::A2) as above, starting in DATA::A2.
This way, the long expressions could continue to reference the original table (with its content now modified).
ALTERNATE process:
Find/Replace could also be used to speed the process of reassigning the modeling expressions to the duplicate table, as suggested by Jerry. But some cautions apply here.
Find/Replace can be limited to Formulas only, but not to Some formulas only.
Find/Replace can be limited to the Current Sheet only, but this can't be combined with Formulas only.
More on this later, when I've had a chance to check some possibilities.
Regards,
Barry

Greater than or equal symbol not working

Hi,
I cannot get the "greater than or equal to" symbol to display properly. I can get the less than or equal symbol to display by typing Ctrl+q #, and then formatting it as Symbol font.
According to the Character_Sets.pdf FrameMaker Online reference, the greaterequal symbol is Ctrl+q 3, but when I format it as Symbol, FrameMaker displays a box (which looks to me to be a non-printing character).
Any suggestions on how I get a "greater than or equal to" symbol to display?
Thanks,
John B.
FrameMaker 8 (8.0 p277)
Windows XP SP 3

Error7103 wrote:
> I cannot get the "greater than or equal to" symbol to display properly.
Try this...
Click in margin.
Format > Characters > Designer...
Character Tag: [ Symbol ]
Family: [ Symbol ]
all else As Is or blank
Commands: New Format...
[*] Store in Catalog
Click in Body Flow A.
Special > Variable...
[Create Variable]
Name: [ char.symbol.greaterequal ]
Definition: [ <Symbol>\xb3 ]
[Add]
[Done]
[Insert]
Advantages:
Avoid frequent arcane typing: you only need to look up the special character entry sequence once per document (if that - we keep these var defs in a separate catalog for ease of application).
Isolates special char encodings for dealing with eventual replacement by native Unicode glyphs and/or ports to platforms lacking legacy Symbol overlay font
Isolates special char renderings for possible changes to font with native >= glyph
Assures text inserted adjacent to symbol will be in native paragraph font, and not Symbol.
Prevents spell checker from needlessly complaining.
Is portable between FM platforms and releases, although \xb3 does appear as Š (cap s caron above) in Windows dialogs.
Disadvantages:
If you apply a Default ¶ Font to the para, the variable is no longer in Symbol font (but this is always the case for variables that use alternate fonts). You have to re-select the var (which may be hard to even see), and re-insert it.
If you highlight the entire para, or just the text containing the var, and apply a new PgfTag, the variable likewise gets de-fonted. It has ever been thus.
You have to search by Variable, and not by special character.
So what do we suppose made this topic so popular that it's got over 1000 Views so far?
I tried these instructions with great anticipation, but alas, it did not work for me.
Maybe it works differently on FrameMaker 9. I even tried making a PDF to see if it just rendered differently on the screen, since you mentioned the display in Windows dialog boxes (even though I was just in the main flow).
See the screenshot below for my results.

Change "to equal" to "to be greater than" in Wait for Field to equal Value"

Similar Messages

Maybe you are looking for