Change Tracker does not automatically log in

Good day,
Could you please assist. We have just successfully upgraded our MDM patch. The problem is that when a user is logged in to Data Manager, previously they could automatically be logged into the Change Tracker tab at the bottom. Now, it prompts the user for their logins before allowing them access. Is there any way we can automatically provide access again?
Thank you.
Regards,
Simni

Hi Simni,
As you have posted this question into Portal Implementation forum, I assume that you are using MDM Change Tracker application in Portal. However, if you are getting issue with the change tracker tab in Data Manager, you should post your question into MDM Forum.
Coming back to your question, after patch upgrade, have you made it sure that Change Tracker Data Source is working normally as it was previously? Do check that both MDM Destinations and Data Source are working fine.
Ameya

Similar Messages

  • Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this?  FYI...under settings i

    Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this?  FYI...under settings i

    If you are missing using google maps - try the Nokia map app called "here"

  • Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

    Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

    If you are missing using google maps - try the Nokia map app called "here"

  • Since upgrading Iphone to iOS 5.1.1 it does not automatically use wifi internet when wifi is available. It has been draining my mobile data. I can only manually change settings with cellular data everytime I get home. Any other solutions?

    Since upgrading Iphone to iOS 5.1.1 it does not automatically divert to my wi-fi internet when wifi is available in my home. It has been draining my mobile data I  now have very high bills from my mobile carrier for high data usage. I can only manually change settings in the Network and turn cellular data on and off everytime I get home and leave the home. This is very frustrating as it wasn't a  problem until the upgrade. I have spoken to a few people that this has happened to. Has anyone found this problem and does anyone have other solutions?

    Please disregard this question. I'll submit a shorter and more direct question. Thanks.

  • I upgraded pages.  Now when I begin a new document I automatically have a text box.  How do I get rid of the text box so that it does not automatically appear.  What settings do I need to change?

    I upgraded pages.  Now when I begin a new document I automatically have a text box.  How do I get rid of the text box so that it does not automatically appear.  What settings do I need to change?

    Perhaps you are loading a template that has a text block already on it.
    You might try the blank template option and set that as your go to template in your preferences

  • I have put my Michel Thomas French lessons on my ipod at the end of a track it does not automatically move on to the next track

    I have put my Michel Thomas french lesson cd's onto my ipod but when each track finishes it does not automatically move onti the next track. I have ticked the option "part of a gapless album".

    naturescape_peopletecture wrote:
    and made a "brush-arrowhead" as you can see in the image below. 
    To answer your questions need to know who you made a brush arrowhead.
    The default arrowhead are specifically designed with a bounding box designed to not have this problem, and even have this option
    You are wanting arrows in the middle of a line so would recommend a scatter brush.
    And a stacked appearance with 2 strokes.
    Though you may not like who the dashes are lining up here so if you go back to the first method I show, you can do  a few paths too get this.

  • ITunes 8 does not automatically advance to next track in album or playlist

    iTunes 8 was recently installed for me by the company on my company laptop. This was done automatically by LANDesk. (We call this being LANDesked. I was forced by LANDesk to reboot my computer twice yesterday, but I digress.)
    iTunes does not automatically advance to the next track in an album or playlist, either in list view or grid view.
    List View: I can play any song in an album by double-clicking it or by selecting the track and pressing the play button. When it gets to the end of that track, it does not automatically advance to playing the next track. Pressing Ctrl-Right stops the current track and does not play the next track. The Next button is active and it, too, stops the current track and does not play the next track.
    Grid View: Play Album button appears to be active but does nothing.
    Is there some setting I'm missing that was set to do this in iTunes 7 but not in 8?

    Thanks. That fixes the problem. I'm an idiot.
    I thought the check boxes were for selecting which tracks get synced to my iPod or iPhone. I must have unchecked them all (before the installation of iTunes 8) when I was trying to figure out how to sync a 2nd computer (this one) to my iPhone.
    I can't find anything in the iTunes help about this necessary fact for playing your albums and playlists. If you look on the Index tab of the help, neither check nor uncheck are found in the list. If you search for check, you eventually find, amongst all the pages, that you need to have tracks checked in order to burn them to a CD and to import them from a CD, but I find nothing about checking to play tracks. Also, the help is very confusing on the difference between selecting one or more songs and checking the check boxes of one or more song. These seem to be used interchangeably occasionally.

  • I have a mac 10.5 and need help figuring out how to change my email settings so it does not automatically delete my inbox every 30 days.  How to I adjust the mail settings?

    I have a mac 10.5 and need help figuring out how to change my email settings so it does not automatically delete my inbox every 30 days.  How to I adjust the mail settings?

    I think it must be an IMAP account then, & in Mail>Preferences>Accounts>Advanced>Keep copies for Offline viewing:>Don't keep copies, then on the Server, or maybe it's just this one itself, but on the Server you have a setting to remove eMails after 30 days.
    If it's a POP account we'd have to investigate that... but you didn't say so I'm guessing here.

  • I had to reinstall itunes and now when I plug in my ipod itunes does not automatically come up so I can log in, how do I fix this?

    I had to reinstall itunes and now when I plug in my ipod itunes does not automatically open to my library or where I can access the itunes store.  What do I do now?

    Open iTunes and connect your iPod. Select your iPod in iTunes from the Source list. (I'm assuming this still works, although you didn't indicate if it did or didn't.) Make sure the box is checked to Open iTunes when this device is connected. You should be all set!

  • ADFS 2.0 service does not automatically start after reboot

    Hello,
    We have two ADFS 2.0 servers in a farm.  Any time these servers reboot, the ADFS service does not automatically start, even though the service is set to auto start.  If I manually start the service it starts within 10 seconds.
    The error in the logs show:
    A timeout was reached (30000 milliseconds) while waiting for the AD FS 2.0 Windows Service service to connect.
    The AD FS 2.0 Windows Service service failed to start due to the following error:
    The service did not respond to the start or control request in a timely fashion.
    But after the reboot is completed, I can manually start the service with no problems.  Again, this ONLY happens on restart.  I've searched the forums and found potential solutions for people who have consistent issues with starting ADFS every time.
    Any ideas?

    UPDATE - I built a 3rd ADFS server and was unable to reproduce the problem, until...
    I went in to the service properties of ADFS and saw that even though I specified a Log On As account during the ADFS wizard, it changed itself back to "Network Service".  I re-entered our ADFS service account username and password, it was
    accepted, and I rebooted.  On the next reboot, the service did not start automatically (with the same errors as the other ADFS servers), but I was able to manually start it.
    I then went to the original ADFS server having the problem, switched it to use "Network Service", rebooted, and the service started up properly on reboot.  I then changed it back to the named domain service account, and the issue came right
    back.  There are no other errors in the System Log indicating a problem with anything else.
    So my guess is that something is happening to prevent the service from starting with the named Domain account on server reboot.  But what?

  • IPad (3rd generation) does not automatically connect to wi-fi.

    iPad (3rd generation) does not automatically connect to wi-fi.  It is fully updated to 5.1.1 but you have to manually connect after turning off and back on.  I also have an iPad 2 with the same OS but it automatically connects.  The wi-fi has no security. 

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Adobe Reader does not automatically associate with PDF files in Xp Sp3

    I have reinstalled Reader (twice) and it does not automatically associate with PDF files.
    How do I fix this problem?
    Cheers, JH

    The thing is, when I right click a pdf file, and then go to properties, change default program to open with, select browse, I select it in the correct folder, when I click open, it doesnt open and the programs stay blank, so I cant select anything. There is nothing to select. And I have re-installed. But at the end of the install there are no options what file types to associate with. Any way to do it inside Reader?
    I have reader 9.2.0. and Win7 up to date. When I'm opening and closing allot of files the whole time, I don't want to do inside reader. Help please?

  • Artwork does not *automatically* copy to iPod classic

    We have 3 ipods in our hosuehold, one classic photo, one 3rd generation photo, and a nano from the latest generation.
    All are managed manually.
    On the older 2, artwork does not automatically copy across from itunes to the ipod when songs are added. Instead, I have to select each song or album on the itunes library, manually copy the artwork, and then paste it into the iPod. while not crippling, it is certainly annoying.
    The nano does not seem to have this problem.
    ANybody else have this problem, and is there a way around it?
    Of course I have "display artwork" enabled on all ipods, and the software is up to date, on all ipods and on the mac.

    I don't manually manage, so my apologies for not being really familiar with it. But my question is, have you noticed that the addition of artwork depends on if the artwork was there from the beginning or not?
    In other words, I wonder if when put in a new CD, tracklisting is looked up, you import and artwork gets automatically added. You then drag and drop those tracks to your iPods. Does the artwork show up on the iPod or do you have to do a secondary addition of the artwork?
    Versus, if you already had the songs on your iPod, then LATER added artwork to the tracks in itunes, I could see where unless you resynced the songs to the manually managed iPods, that the artwork wouldn't go onto the iPod automatically and would have to be manually added.
    I mention this because your Nano is the newest one and I am wondering if the issue is that you have stuff on the older iPods from back before artwork was added to your library. You are now adding artwork, but the songs on the old iPods still have older versions without artwork. The Nano, being brand new, you are probably adding tracks that have since had artwork added and so it maybe seems like it is being automatically added to that iPod and not the others when maybe you just need to re-sync the same tracks to the others?
    Again, just some random streams of thought and guessing.
    Cheers,
    Patrick

  • Server IP has changed - server does not start anymore

    HELP
    our network hoster has changed all IPs of our network, and now, the server BO does not start anymore on the server it was installed ...  does anyone know where could from the issue ? ..
    thanks ...

    Changing IP does not seem to be a problem unless:
    - you've bound ports using fqdn mentioning ip address.
    - you've created cms dns pointing to specific ip address datasource.
    Did you see logs in BO logging folder?
    You may raise a ticket with support if problem persists.
    Thanks,
    Subhodeep

  • Mail does not automatically update on Mavericks 10.9.1

    My Mac Mail does not automatically download after the Mavericks 10.9.1 update on December 16th. I have set preferences to download automatically. It worked fine until recently but now i have to click get mail option to receive emails. It is true for all my accounts (Exchange, Google IMAP, Yahoo IMAP and iCloud IMAP).
    Any help is greatly appreciated.

    Quit Mail. Force quit if necessary.
    Back up all data. That means you know you can restore the Mail database, no matter what happens.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Mail/V2/MailData
    Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder
    from the menu bar. Paste into the box that opens (command-V), then press return.
    A folder window will open. Inside it there should be files with names as follows:
    Envelope Index
    ExternalUpdates.storedata
    Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
    Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Warning: The process may take hours if you have gigantic mailboxes. For reasonable-sized mailboxes, it should only take a few minutes.
    Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

Maybe you are looking for