Change transaction type group for transaction type
Hi
Is it possible to change the transaction type group for a TTY.For ex i want to change for 270 and 151 -TTY GRP -32 and 33 respectively.As of now it is TTY grp is 25 and 10.I need to change this so that in Asset history sheet when i do ABT1N i want these values to be in field transfer and not in acquisition and retirement in respective company codes.
Where is TTY grp are set for TTY.Can it be modified.Please suggest.
For creating transaction type see the wiki.
In the transaction types you assign them!
For 151
SPRO:
Financial Accounting / Asset Accounting / Transactions / Acquisitions / Define Transaction Types for Acquisitions.
Assign there the asst hist group you need for this transaction type
For 270
SPRO:
Financial Accounting / Asset Accounting / Transactions / Retirements / Define Transaction Types for Retirements
Assign there the asst hist group you need for this transaction type
Similar Messages
-
Change Field selection group for Movt type 701
Hi experts,
I want to change Field Selection group for movt type 701. Right now " Business Area " & " Cost Centre " fields are suppressed. I want to change it to required entry.
Please guide me over this
Regards,
Rajneesh Gulatithe note explaines it:
In Customizing an account assignment can be made for every inventory
adjustment account. To do this the inventory adjustment account must
first be defined as a cost element (Transaction KA01 / KA06):
Accounting -> Controlling -> Cost centers -> Master data -> Cost element
-> Create primary / secondary. Then an account assignment can be made
for the cost element (Transaction OKB9):
Tools -> Customizing -> Setup menu -> Accounting -> Controlling -> Cost
centers -> Actual postings -> Automatic account assignment.
If this account assignment is implemented every posting to the
particular inventory adjustment account will automatically receive the
appropriate account assignment. -
Define Account Grouping for Movement Types??
hi
In account determination the setting in transaction OMWM - Define Account Grouping for Movement Types
The above transaction needs any setting or its standard SAP settings??
Can somebody explain me about this transaction in detail.
ThanksOMWM is to decide account determination should happen via valuation grouping code or not. SAP standard is with valuation grouping code. I had never seen singe time anywhere it is deactivated.
Account grouping for movemement you can see in OMJJ. (Inside movement type left side). It is also predefined by SAP. You see only account modifier and check acct. assignment is editable. Others cannot be edited.
In case for same transaction if you want 2 different GL account needs to be triggered for same material in same plant, we copy a movemen type and create a new and assign a different account modifier.
Then in OBYC against it we will maintain different GL account.
Hope you are clear
Regards
Antony -
How to create new group for material type
Hello all experts,
Im unable to create a new group for materials types, diff groups for FG and raw materials material type??
Could you pls help ??
Thanks in advance.Hi
When you create a new material you have to specify the material types like finished goods or raw material like that in the initial screen
For this new material types can be defined in
SPRO -> Logistic - General -> Material Master -> Basic Settings -> Material Type ->Define attribute of material Type
T code OMS2
After specifying the material type and giving organizational data like plant, storage location,sales org etc we go on to create the material
In one of the tabs the material groups should be specified and from MM point of view it is a reqd entry
this can be defined in
Define Material Group
SPRO -> Logistic - General -> Material Master -> Setting for Key Field -> Define Material Group
T .Code: OMSF
I beleive this is what you are asking about
Regards
Raja -
Account grouping for movement types
Hai
Can any one explain me in detail about the account grouping for movement types,
in account determination without wizard,as i am unable to understand the lines for each movement types.
If u have any link, pl attach it also.
Thank youHi, Please refer the below link.
http://help.sap.com/saphelp_46c/helpdata/en/12/1a39516e36d1118b3f0060b03ca329/content.htm
Thanks,
Venkat -
how many type groups r there for ALV reports
Hi,
The following Groups are used in ALV Reports.
ALVHT ALV Control: HTML Templates
KKBHT Type pool for hierarchy component KKRT
KKBLO Type group for dynamic list output
SLIS Global types for generic list modules
Regards,
Mehul Shah. -
I JUST, 9 July 13, bought Logic Pro... Any change Apple will allow for some type of upgrade to Pro X, since we had NO Fore Knowledge of its release...
I bought Logic Pro 9 a few days ago and they just sent me a response with a big NO! Twice! so far!
see this threads:
https://discussions.apple.com/message/22496383#22496383
https://discussions.apple.com/message/22490113#22490113
https://discussions.apple.com/message/22490862#22490862
https://discussions.apple.com/message/22500131#22500131
https://discussions.apple.com/message/22494804#22494804
This is no way to treat your customers. -
Security lending no update types found for prod. type 77B, trans.type 100
Hello
In FTR_CREATE for product type 77B Open-Ended Securities lending I get following error:
No update types found for prod. type 77B, trans. type 100, sec.acct cat.
Message no. TRS0835
how do I solve this?
regards
Arjan
Edited by: Arjan Hogenes on Dec 8, 2009 6:51 PM
I have in customizing in "Update types for position update" for product type 77B, transaction type 100:
Product Type 77B Open-Ended Securities Lending
Transactn Type 100 Loan
Update Type for Open SL1990-
Update Type for Close SL1992+
Update Type for Underlying / Exercise OTC003
Edited by: Arjan Hogenes on Dec 8, 2009 6:55 PM
Edited by: Arjan Hogenes on Dec 8, 2009 6:58 PMPrasad,
I followed your instructions and changed customization for Update type for Position Update type with standard Update types;
OTC001
OTC002
OTC003
but I still get the same error.
In TRM-Trans Mgr-OTC Derivatives-Transaction Mgt-Update Type-Assign FLows type to Update Types
I have:
6 Derivatives 1990 Securities Lending: Basis Flow - Outflow SL1990- Securities Lending: Basis Flow
6 Derivatives 1991 Sec. Lending: Lending Revenue + Inflow SL1991+ Securities Lending: Lending Revenue
6 Derivatives 1992 Sec. Lending: Reverse Posting + Inflow SL1992+ Securities Lending: Reverse Posting
6 Derivatives 1993 Securities Lending: Agent Fee - Outflow SL1993- Securities Lending: Agent Fee
6 Derivatives 1994 Sec.Lending: Cash Collateral + Inflow SL1994+ Securities Lending: Cash Collateral Inflow
6 Derivatives 1994 Sec.Lending: Cash Collateral - Outflow SL1994- Securities Lending: Cash Collateral Outflow
In TRM-Trans Mgr-Listed Derivatives-Transaction Mgt-Flow Type-Assign FLows type to Transaction Type
I have
77B Open-Ended Securities Lending 100 Loan 1990
77B Open-Ended Securities Lending 100 Loan 1991
77B Open-Ended Securities Lending 100 Loan 1992
77B Open-Ended Securities Lending 100 Loan 1993
77B Open-Ended Securities Lending 100 Loan 1994
77B Open-Ended Securities Lending 100 Loan 1995
Any other suggestion for the error "No update types found for prod. type 77B, trans. type 100, sec.acct cat.
Message no. TRS0835"?
many thanks in advance. I Look forward to your answer!
kr
Arjan -
No element type defined for object type BSEG and system / Disp Management
Hi all,
I get the error message
No element type defined for object type BSEG and system ...
Message no. UDM_MSG006
when I try to save a dispute case.
What do I have overlooked in config?
Thanks
Hein
Points guaranteed as always.Hi Sai,
I have configured the standard settings in there.
When I add 2 customer-disputed objects from 2 different customers I get that error.
Any solution to this?
Thank you! -
Standard transaction variant ZMSC2 for transaction MSC2
Hi
I have created a standard transaction variant ZMSC2 for transaction MSC2. When i do the recording for MSC2... I dont see the transaction variant being called..
Please suggesthi
any suggetions -
Clarifications in picklist output type EK00 for transaction VL02N
Hi evryone,
Can anyone please help me to generate a smartform for picklist output type EK00 for Tcode VL02N. In application V2 the standard program is RVADEK01 and the form SD_PICK_SINGLE,
what is the best way to create smartform and driver program , can I use the Standard Program or write the new driver program..
with regards,
MittuI dont think this is the right forum to post such question. This should have been posted in ABAP forum
thanks
G. Lakshmipathi -
Creation of Group for Order type
Dear All,
I have created the stage wise order
types ,now I am trying to create a group for each order
type, while doing this I maintained text &
no.range for the same,
but system is not creating new group,
it replaced the existing group.(OPJH )
please guide me to solve this difficulty
Thanks in advance
Rgds,
Vijay MankarHi Vijay,
1. To create a new group "F6" now type the description and the number interval. Now hit enter. New group is created
2. You need to select the new Number Range Group by selecting the check box on the left side of the group.
3. Place your cursor on the Order type decsription and use "F2" to select the line.
4. Now you need to hit the "Element/Group" icon or F5 in key board to assign the order type to the number range group.
Save the changes now. Number ranges are generally not transported, so you need to do this directly in the client where it is needed.
Hope this steps will help you in understanding how this has to be done. Reward your points,
Regards,
Prasobh -
Creating Authorization groups for material types
Hi All,
I have a requirement to create Authorization groups for different material types we have in our company. Basically these are intended to restric the users from accessing the material master. Different material types needs to be assigned to differnt group of users.
So if we can create couple of Authorization groups, then I am thinking of assigning the material types to these groups.
I went to SPRO---Logistics general ---Material master -
Tools --- Maintain authorization and authorization profiles. TCODE : PFCG
Is this the right path?
Please advise
ShaneHi All,
I don't think SPRO---Logistics general -Material master- Tools --- Maintain authorization and authorization profiles is the right path to create new authorization groups.
Can anyone explain how to create new authorization groups for different material types. The purpose is to create a role and assign this auth. group to this role and provide that security role to specific users.
Regards
Shane -
Define Account Group for Matetial Types
Hi All,
I am trying to understand how Movement types are linked to account assignment.
In IMG - MM - Valuation and account assignment - Account determination - Account determination without wizard (OMWN)
In this transaction or setting i do not see my movement type 101 linked to BSX and WRX transaction key, however when i do Goods receipt with 101 mvt type it is hitting inventory accounts in BSX,
However i see 101 mvt type linked to Transaction key KBS.
How is this linkage working.
Let me know your inouts here.
Thanks,
Regards
RaghavendraHi,
When Goods movement (101) is posted, accounts in BSX is hit.
However in OMJJ setting i do not see 101 movement type being linked to BSX.
Can you let me know is there any relationship here.
Thanks,
Regards
Raghavendra -
Changing The Preview Image for File Types
Is there any way for me to change the image that shows up as the preview for file types? For example, I use OpenOffice and all my .doc files show up as blank pages of paper, which I don't like. I've tried to change this to no avail, from using the "Get Info" window to within the program itself. Any help?
If you have an image that you want to use, do a Get Info on it, select the image at the top of the box and then copy from the Edit menu. Then on your OpenOffice document do a Get Info and paste the image into the little image icon at the top of the Get Info box.
Maybe you are looking for
-
My iPod touch (3rd gen - 64 gig) keeps advising me that my Apple ID has been disabled - it doesn't say for security reasons I have reset the device, changed my password twice, and left it overnight but it still will not allow me to update OR install
-
I am using oracle sqldeveloper 1.0.0.15.57. Previously we were able to set up a breakpoint and step through a stored procedure inside a package. We made sure all the previliges are on and the debugging did really work. But after some time (no changes
-
Has anyone else had this experience? I was on holiday in Canterbury and using mobile broadband, I had to phone in to top up my bt mobile broadband sim with £10. Then I went on line to look at my emails and reply to urgent ones. I didn't download a
-
I phone 3gs home button is not working properly
Hi Folks.. From the last few days my I phone 3GS is giving me a hard time.. Its HOME BUTTON is not working properly. Have to press it 2-3 times and have to press it hard to make it work. I am now running 5.1 iOS, it had the same problem with 5.0.1 iO
-
Is it possible to use Autosuggestion using Oracle ADF Faces?
Is it possible to use Autosuggestion using Oracle ADF Faces? Regards, Shaily