Change tv input from s video to hdmi

Does anyone know if you can change the tv input from the s video cable to use the HDMI as input for watching TV on the Touchsmart 600-1050? The s video works ok but I thought that I read somewhere that you should be able to use the HDMI as an input source. So How do you change the tv tuner to use the HDMI instead of the S video cable? Thanks.
This question was solved.
View Solution.

There is a toggle button on the back right above the HDMI port which allows to go back and forth.

Similar Messages

I had this video file and I was trying to flip it to a format that would work with iMovie. It used to have the Quicktime image with it. So, I assume it was a QT file. But, somehow I've changed the file from a video to a folder.

I had a video file and I was trying to flip it to a format that would work with iMovie. It used to have the Quicktime image with it. So, I assume it was a QT file. But, somehow I've changed the file from a video to a folder. I've tried to undo the action. No luck. I wasn't running my Time Machine. So, I can't go back. Help. It's the only copy of this video.

I've tried to undo the action.
How?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
it's the only copy of this video.
Where did you get the video from?
From the pic I noticed that the folder is 841.9mb. What's inside? Or what happens when you click on it?

Hotsync User ID being changed without input from me!

As far as I know -- with evidence in my data directories -- when I got my Tungsten I set it up with the user name "Wendy". A couple of days ago, when I got a handheld software registration code based on giving that to the software vendor as my user name, it would not work. When I investigated I found that the Hotsync User ID in my desktop software was "2008". Today, New Year's day, when I went to open another desktop component, SplashID, I found that all the data was gone. Lo and behold, when I went to do a restore, I found data folders for Wendy, 2008, and 2009! I then looked at the Palm desktop app and found that the Hotsync User ID there is now "2009"! Why is this happening and what can I do to nail down the user ID that I want?
Please note that I have also been suffering from periodic loss of my non-recurring calendar data. It seems to occur whenever an overnight Windows update takes place that causes my computer to reboot. Using the advice given in the posts responding to my previous message in these help forums, I have -- so far -- always been able to restore the data. I do not recall whether this and the change of hotsync user name started at the same time.
Post relates to: Tungsten E2

Look on your handheld in hotsync and verify the hotsync name in the upper right corner. This is the name hotsync and Palm desktop usues to ID the handheld for sync'ing.
At this point, I am not sure what is causing the username to change.
Are you using Palm desktop 6.2? If you are then you need to close Palm desktop if you are not using it. If you leave it open during a system, virus, or any other type of update, it can cause loss of data. This usually occurs with Palm desktop 6.2.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=tungsten&mn=e2&cn=unlocked
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

Starting over after Hotsync User ID being changed without input from me!

I posted the following message in the Hotsynch section of these forums on Jan 1 and have not yet had an answer; since then the situation has changed, but I want to provide the original circumstances as background:
As far as I know -- with evidence in my data directories -- when I got my Tungsten I set it up with the user name "Wendy". A couple of days ago, when I got a handheld software registration code based on giving that to the software vendor as my user name, it would not work. When I investigated I found that the Hotsync User ID in my desktop software was "2008". Today, New Year's day, when I went to open another desktop component, SplashID, I found that all the data was gone. Lo and behold, when I went to do a restore, I found data folders for Wendy, 2008, and 2009! I then looked at the Palm desktop app and found that the Hotsync User ID there is now "2009"! Why is this happening and what can I do to nail down the user ID that I want?
Please note that I have also been suffering from periodic loss of my non-recurring calendar data. It seems to occur whenever an overnight Windows update takes place that causes my computer to reboot. Using the advice given in the posts responding to my previous message in these help forums, I have -- so far -- always been able to restore the data. I do not recall whether this and the change of hotsync user name started at the same time.
When I got no answer on the forum by the afternoon of Jan2, I sought help viaPalm's online chat. The person who helped me was very patient given the profusion and confusion of user names/IDs but ultimately when I had followed his instructions re deleting Palm Desktop 6.2.2, reinstalling it and synching, the synch just hangs on the databook synch. Since then I have done a clean uninstall according to the instructions for clean Vista uninstalls posted by cygnusX1 on 12-30-2008 04:06 PM in the thread "Syncs fine -- missing all data in Desktop App". The only thing that I did differently was to use the Windows uninstall process before I started manual deletions.
My current situation: I have no Palm Desktop software installed on my Vista PC although the desktop versions of some -- but not all of other Palm apps still work. I have a backup of the "Wendy" directory with Palm data stored on my Windows desktop. I have a Tungsten E2 with calendar, addressbook, memos, todos and data from two of the Splash apps and Diet Assistant. The current name on the handheld is "2008". I would like to end up with a Palm desktop and handheld with user name "Wendy". Any advice on how to proceed to that point with minimal data loss would be appreciated..
Post relates to: Tungsten E2
Post relates to: Tungsten E2

Regarding your "Wendy" backup, is this a backup from a version of Palm desktop prior to using Palm desktop 6.2? If it is, you will need to install the version you used with the "Wendy" username. After the install, copy the username folder into the Palm folder in c-programs-palm. Open Palm desktop and see if the data is there. If you are still having a problem, create the username "Wendy" in Palm desktop, delete the username on the handheld and then when you sync it will ask for the username to sync with, select "Wendy" and continue the sync.
You can erase the username on your handheld using the procedure in the following link;
http://kb.palmone.com/SRVS/CGI-BIN/WEBCGI.EXE?New,kb=PalmSupportKB,t=ooccase,case=obj(24485)
After you go through this procedure, tap on hotsync on the handheld and in the upper right corner is the username assigned to the handheld. If the delete procedure was done correctly, there will be no username in the upper right corner. You can then sync to to Palm desktop and select the username to sync to.
If you have the data on the handheld, you may want to install Palm desktop, create the "Wendy" username in Palm desktop, erase the username on the handheld and then sync to Palm desktop.
Post relates to: Palm i705

Where to validate user input from FPM_FORM_UIBB?

I am supporting an ESS OVP app using WDA and FPM.
This question concerns validating/changing user input from an edit page entered through FPM_FORM_UIBB
In a form, on an edit page, we wanted to mask the initially loaded value of a field with asterisks.
I used the feeder class get_data() method to accomplish this.
The user may then overtype the asterisks with content data. At times, the user leaves some of the asterisks there as well.
I want to check the contents of the inpu field, and, if needed, compress out the asterisks.
if not inputfield co '* ' .
translate inputfield using '* ' .
condense inputfield NO-GAPS .
endif .
Where can I put this code? Or, where, generally, do you code validations of form data?
Thanks…
…Mike

Hi Mark,
You should be able to catch the event in PROCESS_EVENT and GET_DATA. I would put the break-point in both of these methods and check for the field values and based on that decide course of action. So steps would be.
1) Put in the break-points in the obove methods.
2) Check the event and the field values you are intrested in.
3) Code accordingly.
Hope it helps.
Laeeq Siddique

Xr5 remove, hannspree tv, connected but change tv input

My xr5 remote is turning the tv on/off, changing channels/volume. But I cannot change the input to switch to other hdmi/av connections using the remote. So I am using the xfinity remote but I have to have to the tv remote handy to change the input. Should the input be able to be changed with the xfinity remote? There is a tv input button on the xfinity remove. A red light flashes on the remote when I press it and a green light flashes on the tv. Any ideas? TIA.

Did you try ALL of the codes for your brand of TV? FYI, the input button on Comcast remotes does not work with all TVs.Most likely code11348Others to try11745, 11783, 12261
https://customer.xfinity.com/remotes/
dcplitt wrote:
My xr5 remote is turning the tv on/off, changing channels/volume. But I cannot change the input to switch to other hdmi/av connections using the remote. So I am using the xfinity remote but I have to have to the tv remote handy to change the input. Should the input be able to be changed with the xfinity remote? There is a tv input button on the xfinity remove. A red light flashes on the remote when I press it and a green light flashes on the tv. Any ideas? TIA.

FMLE Bug: Encoder changes video input from Composite to SVHS

I have a video signal on the Composite input of my video card and I am encoding using FMLECmd.exe
The problem is that when I change the video input to "Composite" using the Video Device's Property Pages,
FMLECmd.exe sets it back to SVideo again after it stops encoding.
So, before each encode I need to bring up the Property Pages go and change the input to "Composite" again.
How can I work around this FMLECmd bug, any ideas?
Thanks.

FMLE saves Advance Device Property settings in profile file. When you change Input type to Comosite, make sure that you save a profile for that setting.
Next time when you start FMLECmd, start it with saved profile and it should work with Compsite input this time.
What you were doing is probably not closing FMLE after making changes in Device property page due to which settings are not getting saved in startup.xml profile and next time when FMLECmd starts with startup.xml by default it was loading prevoius settings having SVideo input.
So try closing FMLE GUI after changing device property page and then start FMLECmd with stratup.xml file or save these settings in some other proifle file and start FMLECmd with saved profile file
Let me know if this works for you?

No Video via HDMI or screen share from MacMini

Hello,
I've had the following setup for over a year now without any problems:
MacMini <HDMI> Denon X2000 AVR
Sony Blue-ray <HDMI> Denon X2000 AVR <HDMI> Sony 55" TV
Cable Box <HDMI> Denon X2000 AVR
Since I don't have a keyboard or mouse for my mini I've setup "Screen Sharing" so I can login from my MacBook and control it as needed.
Everything was fine until a few days ago, I switched inputs from my Cable box over to the Mini and there was no video. I tried "login in" to my mini via my MacBook and I can't see the desktop, it's just a black box. I can however see the 3TB USB 3.0 drive that i have attached to my mini and have access to all my files.
So to recap my Mini starts up, power light comes on, makes the startup sound but I get no video on my TV or in "Screen Share" from my MacBook. I do however have access to my files on my Mini via my MacBook.
Has anyone had this situation before? I've checked all the HDMI cables by taking the one from my Cable box that is working and plugging it into the Mini to no avail. I've also restarted the mini multiple times.

I've got a 2011 Mac mini.
Since I don't have a keyboard or mouse for my mini I've setup "Screen Sharing" so I can login from my MacBook and control it as needed.
Same here! I've been using Screen Sharing to use this mac mini since I purchased it in 2011. I've never had a monitor hooked up to it.
Everything was fine until a few days ago, I switched inputs from my Cable box over to the Mini and there was no video. I tried "login in" to my mini via my MacBook and I can't see the desktop, it's just a black box. I can however see the 3TB USB 3.0 drive that i have attached to my mini and have access to all my files.
A few days ago I connected my 41" Samsung TV to the mac mini using an HDMI cable. Since doing so, I can still connect to the mac mini and browse the mac mini's file system in Finder (Desktop, Applications, Documents, Movies, Music, etc...) but when I click Share Screen... with that mac mini via the Finder (as I've successfully done for years) it just hangs, and eventually I get the message "Connection failed to mac mini... Please make sure that Screen Sharing (in the Sharing section of System Preferences) is enabled on the computer to which you are attempting to connect. Also make sure your network connection is working properly."
So to recap, the only thing at all that's changed on that mac mini was plugging in the HDMI cable to the television. And now I cannot use Share Screen with it.
For what it's worth, I did hard reboot the mac mini and was able to successfully Share Screen. But after going away for most of the day and coming back, now that I try to Share Screen I again get the error message I pasted above.
Any help would be really appreciated. I don't want to have to reboot my mac mini just to Share Screen for a couple hours every time I want to use it.
Edited to add: while I can't Share Screen to that mac mini any more since plugging it in to the tv with the HDMI cable, for what it's worth I can still control iTunes using the Remote app for iOS. I doubt that's too relevant but adding it here just in case.

Hi,,does the new 2011 imac 27 inch U.S version support any pal signal inputs as video or hdmi through the video recorder device or kanex xd ?

Hello,,
I have 1 question please,,,
does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
as for example
I have a friend who lives in the middle east & has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ? because this is U.S version of imac then he might need an convertor?
the same as if he want to record any hdmi or analog device from his video recorder device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
so can you pls give me an advice for him
should he buy the imac from the U.S store or the europe store ??
N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
and thank you

Hello,,
I have 1 question please,,,
does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
as for example
I have a friend who lives in the middle east & has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ? because this is U.S version of imac then he might need an convertor?
the same as if he want to record any hdmi or analog device from his video recorder device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
so can you pls give me an advice for him
should he buy the imac from the U.S store or the europe store ??
N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
and thank you

Connections: 3 HDMI; 1 S-Video input; 2 Component Video; 3 Composite Video

Hi,
I just went to the store to get a HDMI-DVI and mini (from my macbook) to DVI to watch my MB on my tv. I only see the desktop background without the icons or any window I have open. What am I doing wrong? Please help Are there any specials steps to see the whole enchilada?
Here are my tv's specs:
Connections: 3 HDMI; 1 S-Video input; 2 Component Video; 3 Composite Video Inputs; 1 RS232 Control; 1 Digital Audio Output; 1 PC Video Input; 1 PC Audio Input
thank you.

Connect the MB to its AC adapter. Now close the lid on the MB so it goes to sleep. Now plug in a USB mouse to the MB so it wakes up again. When it wakes up with the lid down, only the TV will be used as the display and the menu bar and everything will be on the TV. Once that happens, you can open the MacBook's lid if you need to use the keyboard. You could also plug in a USB keyboard and leave the lid down as an alternative. If you don't own a USB keyboard or USB mouse, you can wake up the MB with another USB device, like a flash memory stick.

Trying to connect my panasonic viera TV to my new Apple TV with a dynex 1080p hdmi cable but the hdmi option won't show up on my tv when I try to change the input.

Trying to connect my panasonic viera TV to my new Apple TV with a dynex 1080p hdmi cable but the hdmi option won't show up on my tv when I try to change the input. Any suggestions welcome!

Your profile claims Apple TV 2. 1080p is only available withe the Apple TV 3. Apple TV 2 is maxed out at 720p.
Hope that helps

How to change the value from one input control to another input control?

Hi Experts,
I want to change the value from one input control to another input control. For Example if i change month in first tab. it should reflect in second tab also. How should we acheive through input control or some other option.
Here I attached screen shot.Please help me for this

Hi,
It is not possible to have Input controll in all tabs that will be set from another .
But There is one workaround .
Follow the link below .
http://davidlai101.com/blog/2013/08/13/web-intelligence-input-control-that-affects-all-tabs/

Why do I have to change source input to mono when it's recorded in stereo through my interface from an acoustic pick up in order to hear anything in playback?

Why do I have to change source input to mono when it's recorded in stereo through my interface from an acoustic pick up in order to hear anything in playback?
It's a dean markley acoustic pick up with a mono 1/4" jack. It's plugged into a focusrite interface. GarageBand only records it in stereo and only plays it back in mono.

Watts100woo wrote:
with a mono 1/4" jack. It's plugged into a focusrite interface. GarageBand only records it in stereo and only plays it back in mono.
you appear to already know the answer, however...
GB is not recording it in stereo, nor could it
the short story:
http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
(Let the page FULLY load. The link to your answer is at the top of your screen)
the long story:
http://www.bulletsandbones.com/GB/Tutorials.html#bsqstereovsmono
(Let the page FULLY load. The link to your answer is at the top of your screen)

Profile.xml: how to select a video input (from number not name)

Hello,
I'm using FMEcmd in command-line mode with a custom
profile.xml
If I look at the profile.xml it looks like the selection of
the inputs (video and audio) is only possible by giving the full
name of the input (not just the input number like for Real Producer
or Windows Media Encoder).
The app. I'm developing will be used with a webcam and I dont
have the information about the model someone will be using (and the
user won't open the FME GUI to generate a profile).
Is it really not possible to select an input from its number
(as seen by windows)?
If not do you have any suggestion to overcome this
limitation?
Also I've played with <crossbar_input> but I'm not sure
what it means.
Thanks
<video>
<device> ToUcam Pro Camera; Video</device>
<crossbar_input>0</crossbar_input>
<frame_rate>15.00</frame_rate>
<size>
<width>320</width>
<height>240</height>
</size>
</video>
<audio>
<device>Appareil photo Philips ToUcam F</device>
<crossbar_input>0</crossbar_input>
<sample_rate>22050</sample_rate>
<channels>1</channels>
<input_volume>75</input_volume>
</audio>

Now that FME 2.5 is out I tried again. I still can't find the
possibility to select the source from number (like Windows Media
Encoder or Real Producer can).
Can someone confirm that this possibility is not present in
2.5?
Is there any slight chance it will be implemented in the next
version?
What work around do you advise?
Thanks for any answers.

How can i change the quality from my buy videos from hd to sd for my ipod ?

How can i change the quality from my buy videos from hd to sd for my ipod ?
They hd videos are really big and i havnt enaught save place at my ipod so i only want them in sd at my ipod?
I know my english is bad but i hope you understand what i mean.
Thanks for help
Nelson

This is done through iTunes on a computer. You plug it in and under the Summary tab, you can chose what type of video quality you prefer.
You'll choose "Prefer Standard Definition Videos" from the bottom half of the Summary page

Change tv input from s video to hdmi

Similar Messages

Maybe you are looking for