Change Value in Depreciation Area that does not generate posting

Hi,
We have a depreciation area for fiscal values that does not have any posting in G/L. Such depreciation area should have the same value as the posting area, but now some of our assets  have 0 in fiscal area and we would like to have the same as the posting area. How can we change manually the value of the fiscal depreciation area? We would like to change only such depreciation area and not the others.
Thank you very much,
Ariana

You can create a new transaction type (a copy from 100) and limit this transaction type to your fiscal depreciation area.
Then you can make with this new transaction type and the transactions abso the postings in asset accounting

Similar Messages

  • Clean up old SID values from an InfoObject that does NOT have master data

    I have a characteristic infoobject that does NOT have Master Data but it has a SID table. I assume that it is used primarily for the F4 value help. Now we have changed some of our data for this infoobject in R3 so that some of the values in the SID table will never be used again. My problem is that these values are still displayed in the F4 value help. And because the old values are very similar to the new values some users mistakenly pick the old value and then the query results come back empty.
    FYI - The datasource that uses this infoobject as an attribute is extracted from R3 in a Full load each night. So there is no risk that the old values in the SID table will be needed in any Master Data/Cubes/DSOs/etc.
    Is there a way to delete the unwanted SIDs from this table /BIC/SXCSAOFREG? Or is there some way to make sure that the unwanted SIDs to not show up in the F4 value help?
    Thanks,
    Dave

    Hi David,
    Goto SE14 trans --> ENter the table name as  /BIC/SXCSAOFREG. Select the "Edit" radio button. Then Select "Delete Data" radion button & click on "Activate & adjust database". But be very careful NOT to click on Delete Database table(This will delete the physical database table!!!
    Regards,
    Pavan

  • Changed value for Dom0 but xl does not reflect changed value

    Hi.
    I have updated Dom0 default value to 4096M in /boot/grub/grub.conf. However it only display a value of 2994M when I do a xl list after rebooting the host.
    I have installed OVMS 3.1.1 on a Dell M620.
    Any help is welcome.
    Thanks.

    Same here. I've been intending to open an SR about it an never have. I don't know what difference it actually makes but the documentation does recommend you do it and it doesn't reflect that its been changed.

  • Error: Parallel depreciation area 31 is not posted

    Hi experts,
    Hi have customized 5 depreciation areas:
    01 book depreciation in local currency
    30 deferred balance sheet in local currency (for different useful life)
    31 deferred balance sheet in group currency
    32 book depreciation in group currency
    60 derived depreciation area
    I specified that 30 will get values from 01; 31 will get from 30; 32 will get from 01; plus one derived for 01 and 30 difference.
    Then when I entered asset values in F-02 using transaction type 100, I get this error. Please help. Thank you.
    Parallel depreciation area 31 is not posted
    Message no. AA565
    Diagnosis
    The asset to be posted does not manage parallel depreciation area 31, or transaction type  that you are using is limited to certain depreciation areas, and does not contain depreciation area 31. This is incorrect.
    System Response
    Posting is rejected.
    Procedure
    Check the asset and the transaction type.

    Hi John.
    In "Specify use of Parallel Currency" setup your currencies type/Valuation view.
    In Currency Type/Valuation View, against area 31 maintain it for 31 (Group Currency Group Valuation) and against area 40 maintain 40 (Hard Currency). Transfer of Deprecation terms setup from Deprecation
    area “01”.  Setup like below.
    Now go to below
    Maintain your currency as per requirement and see if changes are updated as per above configuration (I mean valuation id is "01" for your depreciation area, try to execute your transaction and let me know if it’s working.
    After that go to define depreciation area and see if your depreciation area setting for 01, 31 and 40 is same. Please try to check in Sandbox first.
    Please mark it as correct if your problem resolves, so it would be useful for other as well.
    Thanks and Regards,
    Sudhir Harale

  • Parallel depreciation area 02 is not posted

    Dear Friends,
    I am getting the below error while posting un-planned depreciation
    "Parallel depreciation area 02 is not posted
    Message no. AA565
    Diagnosis
    The asset to be posted does not manage parallel depreciation area 02, or transaction type  that you are using is limited to certain depreciation areas, and does not contain depreciation area 02. This is incorrect.
    System Response
    Posting is rejected.
    Procedure
    Check the asset and the transaction type."
    I have checked all the relevant settings which might cause the above error, but, in vain.
    Parallel currencies for the Co.Code are configured:
    1st locl cur: INR; Type: 10 - Company code currency
    2nd locl cur: EUR; Type: 30 - Group currency
    3rd locl cur: USD; Type: 40 - Hard currency
    Transfer of dep terms, transfer of APC values & Identical terms for depreciation areas are seemed to be correct. config screen prints attached below.
    Still unable to trace out the root cause of this error.
    Kindly provide your inputs to solve this.
    Thanks,
    Kesav

    Hi Vivek,
    Thanks for your response.
    Parallel depreciation areas were deactivated earlier. I have activated them now. I also have inserted parallel dep areas through AFBN as they were missing in the assets.
    After the above changes, system allowed me to post unplanned depreciation.
    Regards,
    Kesav

  • Fixed asset Write up Error. ABZU(Parallel depreciation area 32 is not poste

    Hi Sap Gurus,
          I am running into an error when trying to post a write up via "ABZU". Here is the error message "Parallel depreciation area 32 is not posted". Message no. AA565.
    Diagnosis
    The asset to be posted does not manage parallel depreciation area 32, or transaction type  that you are using is limited to certain depreciation areas, and does not contain depreciation area 32. This is incorrect.
    System Response
    Posting is rejected.
    Procedure
    Check the asset and the transaction type.
    I tried "Limit Transaction Types to Depreciation Areas" in t-code:OAXE for derpeciation area 01 and 32 but still i am getting the same error. I am using ttype:700. When i look into derpeciation tab in asset master record i have depreciation area 32 is there. Is there any configuration piece i am missing. We are using area 32 as IFRS in group which is copy of 01.
    Any help will be appreciate.
    Thanks and Regards,
    Babu

    Hi,
    There are the following reasons:                                                                               
    1) The wrong transaction type is being used.  Please verify that  you are using transaction type in the 700 series for your write-up.     
    2) The transaction type is restricted to certain depreciation areas.   In transaction OAXE the transaction type can be restricted to post  only to certain areas.  If the asset manages a parallel area you  have to extend the posting to include the parallel area.                 
    3) The asset was created before you introduced parallel currencies and  does not manage the parallel area.  In this case, the parallel  area must be created on the asset or the values need to be  transferred to a new asset that manages the parallel area.                       
    4) Transacion types 600 and 601 can only be used for assets that have a  calculation key in their depreciation area that allows no automatic  calculation (for example depr key MANU).  The unplanned transaction types however can be used with assets that  allow automatic calculation.                                                     
    You also need to verify that there are entries in Table ANLB for the  asset in question for the depreciation area. 
    5) Your company code uses parallel currencies (currency types 10-co.code  currency, 50-Index based currency, 30-Group currency...for example).  The assets created in this company code must have the depreciation areas for parallel currencies active. You can only do this in activating the depreciation areas with  parallel currencies for all the asset classes used in this company code.                                                                            
    Check transaction OAYZ to make sure the areas are activated for all  asset classes in the co.code.  If not, you will need to       activate these areas and ensure the asset has all areas assigned.                
    regards Bernhard

  • Parallel depreciation area 04 is not posted.(Assets)

    Hi All,
    I have found below mentioned error at the time of Advance knocking off.(F-54)
    Parallel depreciation area 04 is not posted.
    I have found below mentioned error at the time of Advance knocking off.
    The error message number :AA565
    The Asset to be posted does  not manage parallel depreciation area 04,or transaction type that you are using is limited to certain depreciation areas and does not contain depreciation area 04. This is incorrect.
    Please help out for this issue.
    Thanks and Regards,
    Ram

    Hi Ram
    With regards to the issue, if you have activated the use of parallel currencies, all assets created in this company code must have the depreciation areas for parallel currencies active. You can only do this by activating the depreciation areas with parallel currencies for all the asset classes used in this company code. Check transaction OAYZ to make sure the areas are activated for all asset classes in the co.code . If not, you will need to activate these areas and ensure the asset has
    all areas assigned.
    Another reason why the error message appeared could be the asset was created before you introduced parallel currencies and does not manage the parallel area. In this case, the parallel area must be created on the asset or the values need to be transferred to new asset that manages the parallel area.
    I hope this information helps.
    Best regards
    George

  • Parallel depreciation area 99 is not posted

    Hi All,
    I'm trying to post a manual write up via AB01 with T.Type 700 and it is giving a below error message. Both are using different COD. Please advise
    Thank you
    Any solutions
    Regards
    Bali
    Parallel depreciation area 99 is not posted
    Message no. AA565
    Diagnosis
    The asset to be posted does not manage parallel depreciation area 99, or transaction type  that you are using is limited to certain depreciation areas, and does not contain depreciation area 99. This is incorrect.
    System Response
    Posting is rejected.
    Procedure
    Check the asset and the transaction type.
    Edited by: Bali1972 on May 23, 2008 3:32 PM

    this t. ype do work in COD USD but not in USD2. Please advise what are i am missing here
    Regards
    Bali
    I checked the answer provide by yourself and
    1) your first reply - it look exactly same as you advise
    2) Also check the T.code OAXE and maintain the t.type 700 to dep area 99
         The T. Type 700 is assigned to COD GBP2 and only 01 is there with display selection.
    When I try to assigned Dep area 99 and error popped stated Transaction type 600: parallel depreciation area 98 is missing
    Please advise
    Regards
    Bali
    Edited by: Bali1972 on May 27, 2008 5:17 PM

  • HT5621 My ipad recognizes and old email address for icloud.  When I go to change the address it sends me an email verification email that says click the link THAT DOES NOT EXIST IN THE EMAIL!!   How do I get this changed?

    I cannot get my icloud email address changed, but I no longer have that email address.  So it is sending an email to an address that no longer exists, yet I cannot get it to change to my current email address.  WHen I walk through the process, it sends me an "verificaiton email" that DOES NOT have the link in it to verify.  UGH

    Welcome to the Apple community TMOZINGO.
    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.

    Hello,
    Suddenly the working CRM is being stopped for some group of users.
    I drilled down to the issue and have checked that the users from Domain in which CRM is installed are having CRM access.
    But for other domain user having problem to access CRM.
    I tried to add a user from a domain which is not of CRM domain then it gives following error.
    "Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.
    <Message>LookupAccountNameW failed with error</Message> "
    The change is made - AD group have upgraded Activer Directory server to 2012 R2
    Please help as the Production CRM is not working for other domain user.

    We have Activer Directory Structure like below.
    One Root Domain says A
    and there are multiple child domain like B,C,D etc...
    B,C and D are all in same level,they are child of A domain.
    There are two way transitive trusts between A and all the child Domain.
    But there is no trust in between B and C and so on.
    Our CRM server is in B domain and B domain's user can access CRM but users of Domain C,D and so on can not access CRM.
    If this post answers your question, please click &quot;Mark As Answer&quot; on the post and &quot;Mark as Helpful&quot;

  • I'm from Brazil, I have an iphone 3gs that does not turn over, would you change in any app store or any authorized?I'm from Brazil, I have an iphone 3gs that does not turn over, would you change in any app store or any authorized?

    I'm from Brazil, I have an iphone 3gs that does not turn over, would you change in any app store or any authorized?

    Have a look at your service options here: Apple - Support - Service Answer Center
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service Fee listed below.
    iPhone Model
    Out-of-Warranty Service
    iPhone 5
    R$ 649
    iPhone 4S
    R$ 549
    iPhone 4, iPhone 3GS,
    iPhone 3G
    R$ 449
    Prices applicable for Sao Paulo. Prices may vary by state due to local ICMS tax. All fees are in Brazilian reais and include tax.
    Since your phone is out of warranty, you'll have to pay for your device being replaced.

  • How can I change my Apple ID that is set up with an old email that does not exist anymore

    I set up an Apple ID years ago with a hotmail email account. I also deleted that hotmail email account years ago. I now have a gmail email. I cannot back up anything to icloud because of my apple id that is connected to the hotmail email account that does not exist anymore. To change my ID, apple sends a verification email to my old hotmail account which i cannot access, and it also says my gmail account is my rescue account, so I wouldn't be able to change it to my gmail account anyway.  Any ideas? I'd like my ID to be associated with my one and only current gmail email account. I have a lot of songs that I've spent a lot of money on over the years that I don't want to lose.

    See Here > Apple ID: Contacting Apple for help with Apple ID account security
              Ask to speak with the Account Security Team...

  • Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort  by kind but that does not work. It arranges all folders but not the files in the folder., Is there

    Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort  by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort  by kind but that does not work. It arranges all folders but not the files in the folder.

    Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

  • The files are on a volume that does not support Trash- Mountain Lion CC-Lr5

    I'm trying to delete files in Lr5-CC and I'm running Mountain Lion My files are on an external portable HD.  I'm getting a message that says: "The files are on a volume that does not support Trash." Does anyone know why this happens and how to fix it?  Thank you

    Hello,
    This reply is months late, but hopefully it'll help you or someone else searching with this problem. I was having the same problem and found a way to get rid of it (permanently, it seems so far). The diagram below shows the steps I took in detail.
    Note: This seems to especially be a problem if your photo files on the same disk as a Mac OS installation or bootable backup.
    Hope this helps:

  • "The files are on a volume that does not support Trash. Would you like to permanently delete the item?"

    Suddenly I've started getting the error "The files are on a volume that does not support Trash. Would you like to permanently delete the item?.
    iMAC OSX 10.9.4.
    LR 5.6,
    Camara Raw 8.6
    Any idea?
    Please Help Me...
    Thanks in advance
    Jose

    This is how I solved it, thanks to combined information posted on forums:
    1. Got a new external hard drive formatted for Mac (I was using read-only Windows from my PC)
    2. Created a folder in new external drive >imported to LR->send to trash- empty trash
    3. The above was still not working until I noticed one day magically the missing picture icon started to show up in LR
    4. I went to the "set as rejected"pictures> locate missing pic (and nearby ones)
    5. Selected the pics -photo>remove> delete from disk
    Done!!!
    Thanks to the hours spent on searching different threads, and to the relentless users because LR never provided any kind of support or formal response to solve this by just letting users to getting lost in frustration .

Maybe you are looking for

  • Google Contacts API 2.0: Add option to select which groups are synced

    This has been a requested issue for quite some time now: *1) Add an option to control what Google Contact groups are synced in ITunes* Currently, if you sync to Google Contacts, iTunes will pull in EVERY contact from your Google Contact list. That in

  • Odd problem in recive message, please help me

    i have a problem in N73. Some messages are displayed at Log application but not display in inbox!!! Please help me.

  • Cannot Connect to the iBooks Store

    When I open the iBooks store in Mavericks I get "Cannot Connect to the iBooks Store". Also, in Safari anything it cannot connect to anything that uses HTTPS (secure/encrypted connection) such as Twitter. However I do not know if that persisted from M

  • Day and Month missing

    Hi When I edit an event in iCal i can only see the year and time in the from and to fields or if I try and set a repeating event to a date. Is there a way to get them to show again. John

  • Problem with update-query

    Hallo, i have a problem with following query. I wanna update the columns in the nutzung table. There are 7 columns but my query updates the geometry that in all columns is the same geometry or I can not update because the query gives more than 1 row