Change variant SAP&HVOM

Hi,
I need to apply OSS note 384956, which involves changing variant SAP&HVOM for program ppio_entry.
The problem is that the variant is protected, and I am therefore not allowed to change it.
I already tried using program RSVARENT to unlock the variant, but the variant doesn't seem to be stored in table VARID.
Does anybody know how I can apply the note?
Thx!

Please look at SAP note : 80526
"Protected variants can only be changed by the creator or by
the user who last changed them.If you want to make these
variants globally accessible again, use report RSVARENT."

Similar Messages

Update manager in IdM automatically when the manager changes in SAP HR

Hi Experts
I have been given a requirement where the manager of a user in IdM should be updated automatically when the manager changes in SAP HR.
The HR extraction job is currently in place and runs every 30mins.
Please could you give me some ideas on how to implement this.
IDM 7.2 SP 6
Thanks
Ran

Hi Deepak
I have been discussing this a bit more in detail with the client. So, the issue is as follows
When a new/replacement manager is hired
When people are moved from one org unit to another
The scheduled extraction job (RPLDAP_EXTRACT_IDM with a variant with the delta tick on) does not update the new manager info in IDM for the relevant users who report to that manager. The client has to run the program (RPLDAP_EXTRACT_IDM with a variant with the delta tick off) manually each time for the affected users which updates the manager info successfully in idm.
I investigated the query LDAP_IDM_QUERY from user group /SAPQUERY/L1 and want to know if the below should be ticked as well. Your thoughts please?
Please advise.
Thanks
Ranjit

Variant SAP&MEPOKONT of program AQZZ/SAPQUERY/MEMEPO========== is not the c

hi guys,
I am getting the following error when running transaction code ME33K:
1.1     Variant SAP&MEPOKONT of program AQZZ/SAPQUERY/MEMEPO========== is not the current version
Message no. DB634
1.2     Diagnosis
You attempted to start report AQZZ/SAPQUERY/MEMEPO========== using variant SAP&MEPOKONT. Since this variant was generated, the report SELECT-OPTIONS or PARAMETERs have changed considerably, i.e. the type or length no longer match and PARAMETERs have become SELECT-OPTIONS or vice versa. Many of these changes are so serious that even attempting to import the variant results in runtime errors.
1.3     Procedure
Adjust or delete the variant.
HOW DO I ADJUST OR DELETE THE VARIANT?

SAP has provided a couple of standard programs that handle this automatically:
RSVARDOC                       Rescue obsolete variants
RSVARDOC_610                   Rescue obsolete variants
We just upgraded to 4.7 and have run RSVARDOC_610 a number of times. In earlier versions, we used RSVARDOC.
This is documented in OSS note 65343.
This program can be reached from the standard ABAB menu:
SE38 (enter your program name) and click the "Variants" radio button. Press "Change".
On the variant screen:
Variants->Adjust.
Rob
Message was edited by: Rob Burbank

Report RNOTIFUPDATE01 and Variant SAP&WORKPLACE

Hi all,
in Solution Manager I scheduled report RNOTIFUPDATE01 with variant SAP&WORKPLACE.
Following the F1-help and also note 781163 using this variant the report should only replicate/create messages to/in Sol Man which have not been closed yet (status "Solution Confirmed" or "Confirmed Automatically") at Service Marketplace.
Unfortunately using this variant I got many many old messages in Sol Man now. Messages which have SAP status "Solution Confirmed" and Sol Man user status "Sent to Support". Beside the fact the report did not work correctly (or I did misunderstand something) is there a quick way to get the messages to user status "Confirmed"?
Report CRM_SOCM_SERVICE_REPORT is not working here.
Thanks in advance.

I found tables CRM_JCDS and CRM_JEST which contain the status i need to change (user status and system status in both tables).
Does anyone know if there is a report to perform changes on these tables?

To create the follow up transaction automatically on status change in sap crm?

To create the follow up transaction automatically on status change in sap crm? If yes, how to make the setting for this?

Hi vishal,
As per the requirement transaction type is activity(ACTI) & sales order(TA). when the take order objective is complete system automaticaly craete a new activity of tele sales call or metting with wholesaler.
this is requirement of client.
now i am already create all type of transaction types of activity & sales order & create follow up transaction also. i have doam already create action profile also but when i am assign this action profile to transaction & try to create an sales order no follow up transaction could be create automatically. i think the condition is not right so please help me out in this. what should be the start & schedulec condition for this scenerio

Reg: If changes done in SAP BO Analysis office, then Changes can be done in SAP BW in respective targets. But, is it possible to do the same changes in SAP ECC? How?

Hello Everyone,
If any changes are done in SAP BO Analysis office, then the change can be done in the SAP BW in the respective Targets.
But how can we do the changes in the SAP ECC ? Is it possible to do the changes in the tables ?
Any answer is appreciable
Regards,
Karteek

We are using the "Input ready Bex query", in order to modify the values in "BO Analysis office".
ECC               BI               BO Analysis office
1 ------------->   1   ---------->         1   ------
                                                                        |
                                                                        | (Now Data is changed in Analysis office from 1 to 2)
                                                                        |
(?) <--------------   2 <----------         2 <-----
(Will it be updated in ECC)
(Diagram Explanation)
From ECC we can load the data (Consider Value-1) to SAP BI and from SAP BI we can load the data to BO analysis office.
So, now if we change the data in BO Analysis office (Value-1 changed to Value-2)..
Now the data is changed in SAP BI to Value-2.
So what about the data in ECC ? Whether it is changed or not?
Please provide us a real time business Scenario..
Thanks,
Karteek

How to see the MM invoice changes in sap?

Hi
How to see the MM invoice changes in sap ?

Dear Prashant,
When ever we perform LIV and is blocked for payment (due to price variance or other variance) is stored on table RBKP_BLOCKED
Now when we release it through t. Code MRBR that time its get deleted from RBKP_BLOCKED
So you can always track it :
Go to ->SE16 ->Enter table name CDHDR -.>Table contents (F7)
In the selection screen enter
OBJECTCLAS as INCOMINGINVOICE
OBJECTID as =Invoice no+year (e.g 51056066022011 where is 5105606602 invoice no 2011 is year)
TCODE as MRBR
->Execute
You will find the details when it was released Date ,Time, User ID etc
Edited by: redriver on Dec 26, 2011 2:23 PM

MOPatch bpmig.sh Structural Changes in SAP Bundle Patches

Structural Changes in SAP Bundle Patches New!
As of June 2014, there is a change in the internal structure of the SAP Bundle Patches (SBPs) for Oracle. While this has many benefits, applying the new SBP for the first time requires special handling. For more information, see the hot news SAP Note 2011199.
When looking at note 2011199 I found due to the changed structure and to identify stand alone patches it is recommended to run the bpmig.sh script.
To avoid these problems or to detect them before actually installing this SBP, you must run the bundle patch migration script bpmig which is delivered with MOPatch 2.1.16 and later.
The script comes up with an error message:
Cannot determine SBP version from "SAP Bundle Patch 11.2.0.3.2 - 201205".
opatch / mopatch semselfs seems to function properly...
Any clues?

Hi,
Please check the following SAP Note 2032109 - Executing bpmig.sh shows "Cannot determine installed SBP"
Thanks.
http://service.sap.com/sap/support/notes/2032109

Module changes in SAP from GAAP to IFRS

Hi,
I would like to know from you IFRS experts with SAP if you could please tell me the following
What are actual changes within SAP modules FI, MM, PP, CO SD from GAAP to IFRS?
In addition, what are the actual physical field or option changes that will take place. (I know one is tax, which will affect tax juristicion input, acc in or out for balance sheet fields within FI)
I cant seem to put my finger on any other key changes within SAP, thank you.

<<Hi,
I would like to know from you IFRS experts with SAP if you could please tell me the following
What are actual changes within SAP modules FI, MM, PP, CO SD from GAAP to IFRS?
In addition, what are the actual physical field or option changes that will take place. (I know one is tax, which will affect tax juristicion input, acc in or out for balance sheet fields within FI)
I cant seem to put my finger on any other key changes within SAP, thank you.>>
This is a very open ended question. In general all the changes are within FICO currently (GL, AP, AR, Assets are the biggest). SAP R&D is currently looking into enhancements within MM/SD to include New GL functionality.
From a field change standpoint, the biggest that come to mind are:
- Ledger field can be input in FI postings (FB50L) to book to specific ledgers in New GL
- Segment field, which can now be used for dimensional reporting.
Most of the fields stay the same, it's the nature in which they are treated that changes (biggest change: PROFIT CENTER if splitting is activated, GLPC* tables go away and move to the *flex tables).

How to changes standard sap label description

Hi !
I heard that there is a way ton change standard sap label description.
Please tell me how to do this ?
Thanks
moshe

Hi Solman
You can do that using the method i have mentioned in
my earlier post to change the descrptions. Mostly these
will be used for Product Attributes in Material Master
to give meaningful names as per our business. You can
find the same if you go through the documentation
following the below path
IMG -> Sales & Distribution -> System Modifications ->
Create New Fields( without Condition Technique).
Here check the documentation of "Reserve Fields in the
Customer Master Record"
Hope that can help you understand better.
Kind Regards
Eswar

How to change the SAP Standard DCs

Hi Experts,
I have to change the particular ESS Address view like enable and disable the property.SAP enable & disable the fields dynmically in DCs.How can I change the SAP standred DC?....
Please advice me........,
Thanks.

Hi,
To customize any Business package DC's, you need to configure NWDI, deploy your BP, get the configuration to your local NWDS, then import the DC's to your local NWDS, make changes and then save.
here is the solved thread for the same Re: Customize/Change ESS MSS WebDynpro Applications (ECC 5.0)
here is a good blog on the same ESS/MSS Customization Make it Simple
PradeeP

IP Change on SAP Servers

Hi,
The purpose of this question is because our company is moving the main headquarters to another plant and we need to move the site, and this also includes the SAP Servers to another location.
So we need to change the IP addresses for every SAP Server that we have.
We have the following architecture:
1 SAP application server defined with hostname SAP-APP (Production system). Operating System is Microsoft Windows Server 2003 Standard Edition with Service Pack 2.
1 SAP DB Server defined with hostname PRODUCCION (Productive DB). Database is MS SQL Server 2000 with Service Pack 4 and Operating System Microsoft Windows Server 2003 Standard Edition with Service Pack 2.
1 QAS and DEV Server with a local Database defined with the hostname QAS_DEV. Operating System is Microsoft Windows Server 2003 Standard Edition with Service Pack 2 and the database is MS SQL Server 2000 with Service Pack 4.
We do not use Print Servers or IP Printers on SAP, we use default printers for every user, using the SWIN: Windows printing via SAPlpd.
Our SAP Version is SAP ERP Central Component 5.0.
Notes related.
And then, we checked the related notes and topics on market place for changing an IP address to a SAP Server and found the following ones:
Note 403708 Changing an IP address.
Note 88346 Changing the RFC destination if IP changes are made.
Note 25917 Changing to /etc/hosts are not accepted.
RFCs on transaction SM59 and table RFCDES
The RFC that we are most worried about are the following:
PRODUCTION:
RFCDEST: CONEXION A QAS
RFCTYPE: 3
RFCOPTIONS: H=10.172.20.14,S=10,M=020,U=EESPINOSAZ,v=E962007D7D3C11AE883C362D16A252D
RFCDEST: SAPNET_RFC
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
RFCDEST: SAPNET_RTCC
RFCTYPE: 3
RFCOPTIONS: H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,S=01,M=0
RFCDEST: SAPOSCOL_SAP_DB
RFCTYPE: T
RFCOPTIONS: H=10.172.20.13,N=
10.172.20.13\usr\sap\PRD\SYS\exe\run\SAPOSCOL.EXE,R=N
RFCDEST: SAPOSS
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
RFCDEST: SDCC_OSS
RFCTYPE: 3
RFCOPTIONS: H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,M=001,U=
QAS:
RFCDEST: CONEXION A DEV
RFCTYPE: 3
RFCOPTIONS: H=QAS_DEV,S=00,M=030,U=EESPINOSAZ,L=E,v=3734043406A307628776795A292D89,i
RFCDEST: CONEXION A PRD
RFCTYPE: 3
RFCOPTIONS:H=SAP-APP,S=00,M=200,U=EESPINOSAZ,L=E,v=A7361E1928457A0626D502BA5F3FB8,i
RFCDEST: SAPNET_RFC
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
RFCDEST: SAPNET_RTCC
RFCTYPE: 3
RFCOPTIONS: H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,M=001,U=
RFCDEST: SAPOSS
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
DEV
RFCDEST: CONEXION A QAS
RFCTYPE: 3
RFCOPTIONS: H=QAS_DEV,S=10,M=020,U=EESPINOSAZ,L=E,v=F004DE7B5EC01E876B998927E7417A,i
RFCDEST: SAP_INTERNET_GATEWAY
RFCTYPE: T
RFCOPTIONS: H=QAS_DEV,G=pynl0x.pypmsa.com.mx,g=smtp.wan,N=/sapmnt/SID/exe/mlunxsnd,R
Is there any problem if we have defined like this the RFC connections?
Are we missing anything using these notes or do we have to consider anything else?
Best Regards,
Erik Espinosa

Hi,
you are not changing the SAP System Host name, you are only change the IP address SAP Server.
for that you are only worried about the RFC destination which are created using IP address of host,
you need to change those RFC and assign correct IP address.
Production.
RFCDEST: CONEXION A QAS
RFCTYPE: 3
RFCOPTIONS: H=10.172.20.14,S=10,M=020,U=EESPINOSAZ,v=E962007D7D3C11AE883C362D16A252D
this RFC is created under Production system for PRD - QAS connectivity.
H=10.172.20 --> assign the correct the ip address of QAS system.
RFCDEST: SAPNET_RFC
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
RFCDEST: SAPNET_RTCC
RFCTYPE: 3
RFCOPTIONS: H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,S=01,M=0
RFCDEST: SAPOSS
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
RFCDEST: SDCC_OSS
RFCTYPE: 3
RFCOPTIONS: H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,M=001,U=
10.172.20.115 -> check the correct IP address of SAP router running at your side.
RFCDEST: SAPOSCOL_SAP_DB
RFCTYPE: T
RFCOPTIONS: H=10.172.20.13,N=
10.172.20.13\usr\sap\PRD\SYS\exe\run\SAPOSCOL.EXE,R=N
10.172.20.13 -> check the correct IP address of SAP production server host
regards,
kaushal

How to revert back User Management changes with SAP ep6

Hi,
While implementing sso for R/3 with sap EP, we did some changes in SAP System of UM configuration, after that we are not able to login with existing super user.
We changed the existing userid SAPJSF to some other value in SAP system of UM. This is causing the problem.
How can I revert back the changes as currently I am not able to access the UM Configuration?
Which file can be change for reverting back the changes?
Thanks,
Manish

Hi Heiko,
I restarted server two times but it does not work. I also reverted the changes from propertysheet as well. Still it does not work.
After that I looked in defaultTrace.trc file and found the exception <b>[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: User is locked. Please notify the person responsible</b>
The exception detail is below:
1.5#0011435A6406001D0000000F000013E80003FB0CCFA7CC82#1120457372187#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_17##0#0#Error#1#/System/Server#Java###Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: User is locked. Please notify the person responsible
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:531)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:201)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: User is locked. Please notify the person responsible
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:2099)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:2315)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:280)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:224)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:528)
     ... 6 more
Can you please tell me that how can I unlock the user as my portal is not coming up. Your reply will be helpfull to me.
Warm Regards,
Manish

No changes on SAP objects allowed

Hello!
I've installed "minisap" for ABAP programming. But when I try to create program I receive the following message:
"No changes on SAP objects allowed
Message no. TK 220"
Could anyone help me with it?

On the face of it, it seems you're trying to change the standard SAP objects (programs). Could you specify which program you're trying to change / add ?
Remember, all your new programs should begin with either a 'Z' or 'Y'.
or
look TA: SE03-Administration-Set System Change Option
Re: No changes allowe to SAP system objects

Changing Standard SAP messages

Hi all,
is there any way to change the SAP Standard messages like user authentication failed, account locked etc.......
Regards,
Sithi

Hi Sithi,
You can search the texts within *.properties files and modify them there (restart the portal afterwards). Anyhow, this is a modification and the texts will be overwritten with the next SPS, so the mods have to be re-done (or save your modified *.properties files and copy them over - but in this case, it could be that there are new (or corrected) entries within the new properties files which then you would miss).
Hope it helps
Detlev

Change variant SAP&HVOM

Similar Messages

Maybe you are looking for