Change versions for PO

Hi Experts,
Where can I see change versions for PO (purchase order) in ERP- MM?
Thanks

This Table will be updated only if you activate version management for PO .
if you want to see the changes made in PO there are 2 ways
1.Goto the PO (ME23n) ,menu bar Enivironment -- > item cahnges or header changes
2.Table level you can see in CDHDR and CDPOS tables .
first pass doc object - EINKBELEG and get document no from CDHDR
pass this doc no in CDPOS get the changes

Similar Messages

Change Logs for customer master data in 3.1 H version

Hello All
Are they any existing reports or change logs for viewing changes to customer master data in 3.1h version. I want to be able to report based on changes made to customer master.
I know there is a good report in 6.0 version for this- S_ALR_87012182.
If I have to develop a custom program for this in 3.1h. Which table I should use? KNA1 or CDPOS.
Any ideas will be appreciated.
Hema.

Hi,
Please check the filter settings maintained for the adapter object CUSTOMER in R3AC1. The same filter settings can be referred in tables Table: CRMFILTAB (R/3) and SMOFFILTAB(CRM) as per srinivas's reply.
Check the sales area of the customer maintained (Sales Area, Division, Distribution Channel etc.) and see if the current filter settings are restricting the customer from getting replicated in CRM. If everything is maintained fine then check for any failure Bdocs in SMW01 or SMW02.
Regards,
K

Output for changes versions in SRM

Hello,
We are currently trying to control when our SRM (server 550)system is to send output to our vendors, but the output is only to be sent if specific elements in an order is changed.
To do this we are using the table BBPD_COMP_FIELDS.
This works very well, there is just one problem that we cant seem to understand why.
If you created an order, then change the order with something that was not suppost to send output (because it is set in the table above) it sends the output. If you then change the same again it will not send out put (which is correct).
So what it does is for changes that shouldent send output when changed:
order --> output (correct)
change1 --> output (Wrong)
change2 --> no output (correct)
it should of been:
order --> output
change1 --> no output
change2 --> no output
Question is why and how do we get it to stop doing this?
Hope someone can help us.
Best Regards
Lisa M Simonsen

Hi
Use the PO version control BADi to change the version for the PO on identified field changes. In SPRO, out put conditions, trigger the change output when there is a change version of the document. This should work.
BBPD_COMP_FIELDS (with SM30). There is something mentioned about which fields to compare for PO output, you have to scroll some way down to get there.
Re: Changed PO output
Also, Please go through the following pointers, which might help you out.
Re: PO output fields
Re: Control PO output to vendor
Re: No Output Condition on Purchase Orders
Version Details
Do let me know.
Regards
- Atul

HT4623 i have install the GM version for my iPod Touch,did i need to do anything to change to public version? restore or else?

i have install the GM version for my iPod Touch,did i need to do anything to change to public version? restore or else?

Please don't post here about beta software. There are confidential forums set aside for developers to use. Developer Forums. If you are a paid developer or seed tester then it's a violation of your NDA to post in these forums. If you aren't a developer or seed tester then you have an illegal copy.

Generate a new version for PO header text change

Hi,
Could you pls instruct me the configuration settings to generate a new version for PO header text change? I secceeded in other fields, e.g. Inco Term, Order Qty, Delivery date, but failed in header and Item Text.
I added STXH_TDNAME but it doesn't work. Thanks!
Regards
Jully

Hi,
Thank you very for the feedback.
The 4th point of note 664928 says "This is not a change to print-relevant texts". I assume there is a way to configure the text as a "print-relevant text" and I confirmed my texted is configured for printing for operation 1 & 2 (create and change order) in:
MM > Purchasing > Messages > Texts for Messages > Define Texts for Purchase Order.
Still not working. Any idea? Do I miss anything? Thanks!
QUOTE of note 664928 :
Question:
You change the texts in a purchase requisition or a purchasing document. Why does the system not generate a new version?
Answer:
This is not a change to print-relevant texts.
Regards,
Jully

Bought photoshop elements 11 last year for windows and using it in my desktop. The desktop is crashed now and not usable. So I bought iMac now. Is it possible to trade over or change the licence into iMac version for a small fee. If not , can I partition

bought photoshop elements 11 last year for windows and using it in my desktop. The desktop is crashed now and not usable. So I bought iMac now. Is it possible to trade over or change the licence into iMac version for a small fee. If not , can I partition the hard drive of iMac and install windows and also photoshop elements? which is the best alternative ? why?

A Photoshop Elements license is good for both Mac and Windows so it should be just a matter of downloading the Mac version and using your current serial number to activate it.
PSE 10, 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
If you have any problem with the activation contact Adobe support using chat... Start Here If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option.

I activated this week my Photoshop and Lightroom CC and noticed it is a dutch version but in the past I always worked with an english version. Can I change the dutch version for an english ? Thanks. Peter

I activated this week my Photoshop and Lightroom CC and noticed it is a dutch version but in the past I always worked with an english version. Can I change the dutch version for an english ? Thanks. Peter

Hi t Forograafken,
You can check your Creative Cloud Application Preferences to see if 'Deutsch' is chosen.
You can change the App language from here :
Regards,
Rave

Is it posible to change from cs6 master collection student version for mac to one for windows?

Hello,
I am a student and have a CS6 master collection student version for mac.
Now my question is, if it is posible to change this version into a cs6 master collection for Windows?
Already thanks for your answers.

Order product | Platform, language swap
Mylenium

Need help writing script to change version control for all document libraries in all sites

Hello,
I found this script, http://get-spscripts.com/2010/10/changing-sharepoint-list-settings-using.html that
changes versions control for a document library. However, many sites have many document libraries with different names. The script below just changes a the settings to a document library that is named "Shared Documents", but does not
change one if its named something else. How can change the script to loop through all document libraries so their settings are changed?
$site = Get-SPSite http://site
$listName = "Shared Documents"
#Walk through each site in the site collection
$site | Get-SPWeb |
ForEach-Object {
#Get the list in this site
$list = $_.Lists[$listName]
#Create a version each time you edit an item in this list (lists)
#Create major versions (document libraries)
$list.EnableVersioning = $true
#Create major and minor (draft) versions (document libraries only)
$list.EnableMinorVersions = $true
#Keep the following number of versions (lists)
#Keep the following number of major versions (document libraries)
$list.MajorVersionLimit = 7
#Keep drafts for the following number of approved versions (lists)
#Keep drafts for the following number of major versions (document libraries)
$list.MajorWithMinorVersionsLimit = 5
#Update the list
$list.Update()
#Dispose of the site object
$site.Dispose()
Paul

Sorry, I agree. It will update Style Library and other out of the box ones. Include the library titles in a collection and run the update against them provided these libraries are common across all sites. If not, you will have to first get an extract of
all such libraries in all sites say in a CSV file and then update the script below to refer to the CSV records.
Add-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction Stop;
#List of Libraries to be updated.
$Libraries = @("Shared Documents","My Document Library");
$spAssgn = Start-SPAssignment;
$site = Get-SPSite http://site -AssignmentCollection $spAssgn
#Walk through each site in the site collection
$site | Get-SPWeb -Limit ALL -AssignmentCollection $spAssgn |
ForEach-Object {
#Enumerate through all document libraries
$_.Lists|Where{$_.BaseTemplate -eq "DocumentLibrary" -and $Libraries -contains $_.Title}|Foreach-Object{
#Get the list in this site
$list = $_;
#Create a version each time you edit an item in this list (lists)
#Create major versions (document libraries)
$list.EnableVersioning = $true
#Create major and minor (draft) versions (document libraries only)
$list.EnableMinorVersions = $true
#Keep the following number of versions (lists)
#Keep the following number of major versions (document libraries)
$list.MajorVersionLimit = 7
#Keep drafts for the following number of approved versions (lists)
#Keep drafts for the following number of major versions (document libraries)
$list.MajorWithMinorVersionsLimit = 5
#Update the list
$list.Update()
Stop-SPAssignment $spAssgn;
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

Hi, I am worried about the old Iphones, couldn't we change them for another version? I have my Iphone 3, love it, but now I am feeling out of the picture. The phone works perfect...Is there any plan to do so? like recycling?

I am worried about the old Iphones, couldn't we change them for another version? I have my Iphone 3, love it, but now I am feeling out of the picture. The phone works perfect...Is there any plan to do so? like recycling?

You can purchase any model (currently sold) iPhone that you desire.
What's the big deal or so complicated about figuring that out?

How can I change the language interface of Firefox 4 Beta to English (on Swedish OS)? Can only find different language versions for 3.6.8.

How can I permanently change the language interface of Firefox 4 Beta to English?
Computer is running on Swedish Windows XP.
Found that the advice on similar questions is to install the language version of the desired language on top of the current version but I haven't found different language versions for 4 Beta, only 3.6.8.
Have also tried to change general.useragent.locale (about:config) to en-US but to no avial.

Hello,
If somebody has installed the multi-language package is there a possibility the language to be changed without reinstalling the browser?
Best regards,
Yuli

I need to change my iCloud email address. I changed it for my Apple id but I can't log out of iCloud to change it there. Find my iPad is activated so I can't delete my iCloud account. I don't have the email address the iCloud login has anymore.

I need to change my iCloud email address. I changed it for my Apple id but I can't log out of iCloud to change it there. Find my iPad is activated so I can't delete my iCloud account. I don't have the email address the iCloud login has anymore so I can't have the password sent there. To sum it up, iCloud has an old email for the account log-in. I don't remember the password for the old email. I have Find My iPad activated so the iCloud account cannot be deleted. And I am already logged out of iTunes & App Store.

If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple IDand that ID is a previous version of your current ID, not an entirely different one.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

Best Safari version for 10.6.6

I'm running Safari 5.0.2 on a 15" Macbook Pro running Snow Leopard 10.6.6.
I'm having issues with some sites so wish to try another version of Safari to see if that will help.
I downloaded versions 5.0.2 (just for safety if I had to return to it), 5.0.3 and 5.1.1, all of which said they were compatible with Snow Leopard.
When I attempt to install 5.0.3 it says it cannot install as it needs OS version 10.6.5
When I attempt to install 5.1.1 it says it cannot install as it needs OS version 10.6.7
Even when I attempt to install 5.0.2 it says it cannot install as it needs OS version 10.6.4
What Gives? Is there a version of Safari out there that will install onto OS 10.6.6?
Please don't recommend me changing my operating system, I am staying with this version for other compatibility reasons. The question is:
Is there a version of Safari out there that will install onto OS 10.6.6? And if so can you recommend the site in which to find it? Thank you.

Hi..
Is there a version of Safari out there that will install onto OS 10.6.6? And if so can you recommend the site in which to find it?
Never install anywhere but from the Apple support page.
Not running the latest Mac OS X puts your Mac at risk for malware. For whatever reason you are not running v10.6.8, consider updating to v10.6.8 and Safari 5.1.5.
All you have to do is click your Apple menu > Software Update

Creation of Runtime version for Knowledge base

We are using a Configurable material (CM1) with profile (P1) assigned to it. The profile assigned has the following details (in tx cu42):
. a. Config parameters Sales order
. b. BOM explosion Single level
As per SAP The Single-Level BOM Explosion setting is not supported when configuration Engine is used. But in our R/3 system, the configuration profile used has a setting for Single level BOM explosion (point b written above).
So while creating the Run time version for the KB (for material CM1), an error message comes Configuration profile P1 for material CM1 is invalid for Cause 1 - The setting is Single level BOM explosion
Please help how can the issue be resolved?

Hi Saurabh,
the only resolution is to change the configuration profile to multi-level explosion.
Michael

Logical system for client 001 for SAP NETWEAVER ABAP TRIAL VERSION for BI

Hi,
I have installed SAP NETWEAVER ABAP TRIAL VERSION for BI. In that I have to create logical system for client 001. I have taken a list of available clients from the abap R3 side. Here is a list of it.
Clients View
Cl. Name City Crcy
000 SAP AG Konzern Walldorf EUR
001 Auslieferungsmandant R11 Kundstadt USD
066 Test EarlyWatch Profiles Walldorf EUR
I cannot get inside the BW side for it asks me to create a logical system for client 001. What to do?
Kindly help me.
Kannan

hi,
? First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
? Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
? You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
? Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
? Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
? R/3 - B W - R/3
? Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
? PC ?Flat file , DB ? Database
? Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
? BW ? RS1 ? SOURCE SYSTEM ? CREATE MANUAL AUTOMATIC CELL
? R/3 ? Test connections login ? back ? replicate method ? active data R/3 Source system you will able to.
hope it helps u
Ramesh

Change versions for PO

Similar Messages

Maybe you are looking for