Change View for standard component

Hi all.
I am working on ICwebclient 2007. using standard icwebclient. The 'Account Identification' search component ICCMP_BP_SEARCH automatically displays view ICCMP_BP_SEARCH/BuPaSearchB2B but for my requirement i need to use search view ICCMP_BP_SEARCH/BuPaMixSearchB2B . Where to change, configure or how to change this view. please reply with answers.

Hi,
In your account identification profile in spro, can you just change the value of parameter -Scenario= Mix,instead of B2B and check?
Thanks and Regards.
Rohit

Similar Messages

Creating 'Z' views for Standard ABAP Web dynpro Application

Hi Experts,
I am totaly new to ABAP web dynpro objects.
In our project there were some client requirements which required us to change the properties of the Views related to the Webdynpro. The Client now has said that he needs to apply some enhancement pathces on his system. Due to this, the changes made to the Views i.e all the changes done in standard code are lost.
The client now wants a long term solution where all the changes need to be done in 'Z' implimentataion so that changes are not lost every time the pathces are applied.
Is it possible to create an entire new 'Z' Views for the standard Webdynpro instead of standrad ones?
If Yes how does one link them to the Webdynpro application ?

Hi
Have a look at following article about enhancing webdynpro applications.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700317da-bd79-2c10-368e-8f18bf5d8b81?quicklink=index&overridelayout=true
Regards
Manas Dua

Best Practice : Creating Custom Renderer for Standard Component

I've been reading the docs and a few threads about Custom Renderers. The best practice seems to be to create a Custom Component where you need a Custom Renderer. Is this the case?
See [this post|http://forums.sun.com/thread.jspa?forumID=427&threadID=520422]
I've created several Custom Renderers to override the HTML provided by the Standard Components, however I can't see the benefit in also creating a Custom Component when the behaviour of the standard component is just fine.
Thanks,
Damian.

It all depends on what you are trying to accomplish. Generally speaking if all you need is for the user interface output to be changed then a renderer will work just fine. A new component is usually made in order to provide some fundamental change in server side functionality not related to the user interface. - Ponderator

Created A view in standard Component.

Hi All,
I have created few view and view set In a standard component As per my requirement . This view and view set is created successfully .
But when I want to add the view or view set In Runtime Resportiory it is not visible.
For E.g. I want to add the view in Overview page but the view is not showing.
Some where We have to append.
Any pointer can help me.
Thanks in Advance
Thanks & Regards
Rasmi Ranjan Pradhan

Hi Rasmi,
Are you searching the view in the enhanced component itself?. Usually people do a mistake that they give the standard component name and the view won't be visible. While giving the component name, give with Z.
Thanks,
Faisal

IDOC trigger using Z change pointers for standard SAP table

For IDOC trigger, is using custom change pointers on standard SAP master data tables, a good idea? A seasoned abaper told me "it will mess with the standard" and further told to go with scheduled job.
So, for example, say that my data for table T001K is updated via transports in PRD and I need to transfer this updated data via IDOC to an external system. Since there is no standard message type for this data, I will create a new one. Further, I will create a new change pointer for table T001K (it already has six fields with their data elements activated for Change Documents). Then I link the message type and the new change pointer. And so on an so forth. I have followed the procedure given here:SAP Tips: A to Z of Custom Change Pointer
Now, the question is, will this be a good idea to capture data and trigger IDOC? Or a batch program with calls to standard FM to read CDHRD/CDPOS be a more suitable option.
I need to know if a near instantaneous data transfer (and an effecient one as far as the system performance and reliability is concerned) can be acheived. If there is any other way of doing this, I am not aware of it!
Any one has any input/experience on this?

Hi Viktor,
I think the batch program approach would be a good solution as the by this way you are taking matter into your own hands rather giving control to the SAP framework because you may have to test out the other approach as to how the standard SAP framework is behaving for custom change pointers.
Thanks,
Ravi

Mass Change Function for Standard Templates

Hi All,
I am trying to use Mass Change Function to change one field value in my Standard project Definitions as well as Standard WBS Elements but its not doing.Is it that Mass change Function is only aplicable for Operative projects and not for Standard Templates?
Expecting your response on this.
Thanks and Regards,
Harsh Shekhar.

your observations are correct - mass change functions are only for oprative pojects and not for standard templates
you can try LSMW

ADF Faces - Change style for menuTab component

How to change color for menuTab components (selected and enabled)?
I do not want to create new style, all I need is just change some colors and fonts for default oracle style.
I was able to change color for table, overridinf some styles in my css-file, but overriding
<af_menuTabs_selected> and <af_menuTabs_enabled> did not work, because on generated html-page menuTab components do not use any styles. Is there any workaround to change color of that component?
Thanks.

public String commandButton_action() {
ot_msg.setValue("Hello");
AdfFacesContext.getCurrentInstance().addPartialTarget(ot_msg);
The code above works fine but I nead also, in the method, to generate a excel file with JXLS librairie.
The file can takes a long time to download and thus I want to change the value of outputText while the file is generating and not after.
How can I do that ?
Thanks

Activating change documents for standard tables

Hi all,
Can someone please tell me how I can activate change documents for a standard table.
I created a change document object in SCDO and included the standard table I am working with. This table does not have "LOG DATA CHANGES' enabled in its technical settings. I checked the data element of the field I am interested in and it has "Change Document" enabled.
Is there any way to activate change documents for a std table without writing code to create change documents?
Thanks.

Hi,
Check this transaction SCU3, this is to activate the change logs for the tables.
Regards,
Satish

Changing password for standard service users

Hi,
Is it advisable to change the password for standard service users (i.e. SAPCPIC, WF-BATCH, SAPJSF, TMSADM) created during SAP Installation?
Rgds,
Hapizorr

Hi,
As long as you remember and document the changed passwords it should be no issue.
Regards.
Ruchit.

Business content for standard component is missing in BW

In a new BW implementation project what I have done is
1) activate all datasource in R/3
2) Replicate datasource in BW
3) Activate infoobject in business content.
The problem is, when I go to Business content >InfoObject by Application component> All I see is node OBWTCT ( Technical Content ). Why I Don't see the standard component ex FI SD COPA etc ? Is there a step missing ?

Hi,
Maybe you did not activate the infoareas/infocatalogs.
Try this:
-Tx(RSD1)
-Find any of the infoobject that you activate and check where is present the infoobject.
Regards
Assigns point if useful

Setting a fixed width and a changing height for a component within a panel

Alright guys here's my next question. I'm now having trouble trying to figure out how to only resize the height of a JTabbedPane yet keep the width fixed. In other words, as the JPanel its in changes in size, I'd like to have the width of my tabbed pane stay a certain value yet let the height of it adjust to the panel's height as it changes. Is there a way to somehow extract the panel's height into a int or something and then when using the setPreferredSize() function simply implement this retrieved value into the function's height parameter? I've tried messing around with Dimensions and getHeight() functions and the sort but to no success. For instance, within the constructor of one of my JFrames using System.out.println(this.getHeight()); prints 0, when of course this is not the case in reality for the frame's height. The panel's changing size is due to the user resizing the window its in. In one of my previous threads in this forum I learned how to use a GridLayout (it was 2 rows and 1 column in size) to keep the height of the top area in a BorderLayout fixed, yet as the user resized the window, the layout would stretch the area width-wise accordingly. However, that was because I had 2 cells in the layout to control, and I know this wouldn't work with only 1. Any ideas?

You still apparently haven't read the tutorial on using Layout Managers to understand the capabilites of each Layout Manager.
For instance, within the constructor of one of my JFrames using
System.out.println(this.getHeight()); prints 0, when of course this is not the case in reality for the frame's heightComponents don't have a size until the GUI is visible on the screen. That is until you've done a pack(), or a setVisible( true ). You should never be using setSize().
Layout Managers use setPreferredSize() ,setMinimumSize() and setMaximumSize() as suggestions for determining the layout. Although most layout managers don't use all the suggestions, which is why you need to read the tutorial to find out how the layout managers work.
I'm now having trouble trying to figure out how to only resize the height
of a JTabbedPane yet keep the width fixedWell, I don't understand the requirement. The preferred size of a tabbed pane is equal to the preferred size of the largest tab added to the tabbed pane. So I don't understand the concept of artificially changing the vertical height.
Anyway reread the tutorial on "How to Use the Border Layout". Two of the 5 areas respect the width of the component but alter the height to fill all the available space.
If you need further help then you need to create a [url http://homepage1.nifty.com/algafield/sscce.html]Short, Self Contained, Compilable and Executable, Example Program that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
And don't forget to use the [url http://forum.java.sun.com/help.jspa?sec=formatting]Code Formatting Tags so the code retains its original formatting.

Change text for standard button

Hi,
Anyone has an idea of how to change the text of a standard button, e.g. the Go button of the advanced search header.
TIA
Shane

In your first post you asked about ALV and now about non-ALV...
So about ALV you have the Excel download by default and you are able to change the text.
About non-ALV download I think you have to use the method: cl_wd_runtime_services=>attach_file_to_response.
Look at the last post in:
File download WD4A
Sergio

Change View for All Playlists

I now have all my playlists in the "List" view. How do I switch them all at once to the 'Grid' view?

There's no FAST way I know of, which is what I think you mean.
Only the painful SLOW way of one-by-one.
You could make a new playlist from the main library after you've set the columns up as you like.
Go to an existing playlist that doesn't have the columns you want, and select all.
RIght-click > Add to Playlist and send them to the new playlist.
That's still one-by-one and only works with static playlists, not smart ones.

Error while enhancing a view for bt115qh_slsq

Hello
Iam unable to enhance a view for bt115qh_slsq component.
When i right click a view and click Enhance. It throws an error stating that "Choose a change request with target system C07".
Please someone provide me a solution.

Hello,
you may try the following: please go to se03 -> "Find Request". Input the
request and find it. Double-click the request to change the target
system or related settings.
Regards,
Gerhard

Adding a view in a component of BSP application

Hi All,
I want to create new component for a BSP and add a view to it.
my scenario is : I have a problem in creating a pop-up view whenever a button in a WEB UI is clicked.
I have added a button in the items tab of sales order creation(in WEB UI),so when that button is clicked a pop-up view has to be generated.
the view i am creating is a ineractive view where the user can enter some data and press a button in the pop-up window so that the data is copied in the items tab.
the pop-up contains a table grid where the user can enter the data and press the button in pop-up window.
so could you please let me know how to create this type of pop-up window.
Regarding this some one has send me a solution of creating a new component with a new view.but unfortunately i am not able to create a view because it is asking for nodes and BOL entity.
so could you all provide me some input inorder to create the component and view.
Thanks
Tanveer

Hi Tanveer,
I have done the Similar Case.
By now I hope you have Created a New Component.
Ensure the Following Points before you Proceed.
1. Create a Window/View Set and View.
2. As you are saying yours is Table View while Creating View Specify it as Value Node and assign Corresponding Attributes to the Value Node.
3. Specify Type of View is Table Type.
4. Now in Runtime Repository Add the Created Window.
5. Now add the Created ViewSet and View to the Window and Save.
6. Create a New Interface View which is ( Window Name ) in Runtime Repository.
7. Add Component Usage in Runtime Repository.( In Source Component where Button is Present )
    a. Give ID and Interface View for the Component Usage and give Used Component
        Name. If View is created in same component then give same name other wise
         Give another component name.
8. After create View/Window/Component Interface/Component Usage Now to get the
   Table View in Popup Screen
   Modify the Standard Code similar to the Table View in HTML Page.
   For Reference:
<chtmlb:tableExtension tableId = "Table"
                       layout = "FIXED" >
<chtmlb:configTable id              = "Table"
                      navigationMode = "BYPAGE"
                      onRowSelection = "select"
                      selectedRowIndex      = "<%= CONTEXTNODE->SELECTED_INDEX %>"
                      selectedRowIndexTable = "<%= CONTEXTNODE->->SELECTION_TAB %>"
                      selectionMode         = "<%= CONTEXTNODE->->SELECTION_MODE %>"
                      table           = "//CONTEXTNODE->/Table"
                      usage           = "SEARCHRESULT"
                      visibleRowCount = "10"
                      width           = "100%"
                      showNoMatchText = "FALSE"
/>
</chtmlb:tableExtension>
CONTEXTNODE is the Context Node in View.
Now to get the Values in the Table View when popup gets displayed.
Go to the Newly Created View and add Code to populate Values in Table View
Method CL_BSP_WD_CONTEXT_NODE_TV - > IF_BSP_MODEL~INIT.
Now,to Call the Created View as a popup from the New Component when Buton is Clicked
Use the Following Code in the Event of Button Click.
DATA: lr_popup TYPE REF TO if_bsp_wd_popup.
IF lr_popup IS NOT BOUND.
    lr_popup = me->comp_controller->window_manager->create_popup( )
    (Specify Parameters Interface View,Component Usage and Title for Window in the above Method._
    lr_popup->set_display_mode( if_bsp_wd_popup=>c_display_mode_surrounded ).
ENDIF.
Set the callback event on the imported controller ( Specify Event Name which needs to get Triggered when Popup is Closed.)
lr_popup->set_on_close_event( iv_event_name = "EVENT_NAME"
                                       iv_view = me ).
*Set the width of the popup
CALL METHOD lr_popup->set_window_width
    EXPORTING
      iv_width = 500.
*Open the popup
lr_popup->open( ).
This will help in Getting a View as a Popup when Button is Clicked.

Change View for standard component

Similar Messages

Maybe you are looking for