Change VTP mode from Client to Server in a production VTP Domain
Dear all,
we have a production VTP Domain with some switches acting as VTP Client and 1 as a VTP Server. now the master is dead, and we would like to change the mode of one of the remaining switches from VTP Client to VTP Master. IMHO this change should not have any impact on the current configuration of the switches (and on the VLAN database), but we would like to have your opinion about this.
Any help/feedback will be greatly appreciated
thank you
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
That should be fine. The real difference between a VTP server vs. VTP client, the former allows (manual) VLAN configuration changes and the latter doesn't.
Similar Messages
-
Change default VM from "client" to "server"
Hi,
By default, java uses the "client" VM on my system, as you can see:
java -versionjava version "1.6.0_01"
Java(TM) SE Runtime Environment (build 1.6.0_01-b06)
Java HotSpot(TM) Client VM (build 1.6.0_01-b06, mixed mode, sharing)
I've made the server VM available by copying it from the SDK to the JRE's folder, though:
java -server -versionjava version "1.6.0_01"
Java(TM) SE Runtime Environment (build 1.6.0_01-b06)
Java HotSpot(TM) Server VM (build 1.6.0_01-b06, mixed mode)
What I would like to do, is set the server VM as the default VM. This is on Windows Server 2003 (which I use as a desktop), so I've gone to the control panel -> java -> java tab -> view java applet runtime settings -> added "-server" to the java runtime parameters. AFAICT this is only for applets though, and the java control panel doesn't contain anything to change runtime parameters for my desktop applications (e.g. netbeans, azureus).
What's the correct way to change the default VM? I'm interested in doing this on both Windows (2003) and GNU/Linux (Debian).
Thanks!I figured out how to change it, posting it here in case anyone else wants to do this.
You simply need to find the file "jvm.cfg" and put this line above all others: "-server KNOWN" (no quotes of course).
On Debian GNU/Linux with Sun Java 1.5.0, the file in question is at /etc/java-1.5.0-sun/jvm.cfg.
On Windows, somewhere in c:\program files\java.
Edit: by the way, you can't have a blank line between the comments and the statements - this will give you an error.
To test if it worked, run "java -version" - it should say "[...] Server VM [...]". -
How to transfer passwords encrypted from client to server?
Hello dear community,
I have already some experience with programming and did a lot of web-software, but I never was facing the problem that passwords are transfered as plain text to the server when using a login-form.
For my front-end, I use Java ServerFaces 2.0.
I read a lot of hints like using a javascript based MD5 library and send the password as MD5 but this can be sniffed an decrypted easily.
Do you have some hints to easily implement a secure transfer of values from client to server?
best regards,
Bernigoose_fraba wrote:
and how to do that? how to configure etc.?Server specific. Read your server's documentation. -
Sending an object from client to server always on button press
What I need is to send an object from client to server but I need to make server wait until another object is sent. What I have is the JFrame where you put the wanted name and surname, then you create a User object with these details and on button press you send this object to the server. I just can't hold the connection because when I send the first object, server doesn't wait for another button click and throws EOFexception. Creating the while loop isn't helpfull as well because it keeps sending the same object again and again. The code is here
public class ClientFrame extends JFrame {
private JButton btnSend;
private JTextField txfName;
private JTextField txfSurname;
public ClientFrame() {
this.setTitle(".. ");
Container con = this.getContentPane();
con.setLayout(new BorderLayout());
txfName = new JTextField("name");
txfSurname = new JTextField("surname");
btnSend = new JButton(new AbstractAction() {
@Override
public void actionPerformed(ActionEvent e) {
SSLSocketFactory f =
(SSLSocketFactory) SSLSocketFactory.getDefault();
try {
SSLSocket c =
(SSLSocket) f.createSocket("localhost", 8888);
c.startHandshake();
OutputStream os = c.getOutputStream();
ObjectOutputStream oos = new ObjectOutputStream(os);
InputStream is = c.getInputStream();
ObjectInputStream ois = new ObjectInputStream(is);
boolean done = false;
while (!done) {
String first = txfName.getText();
String last = txfSurname.getText();
User u = new User();
u.setFirstName(first);
u.setLastName(last);
oos.reset();
oos.writeObject(u);
String str = (String) ois.readObject();
if (str.equals("rcvdOK")) {
System.out.println("received on the server side");
} else if (str.equals("ERROR")) {
System.out.println("ERROR");
//oos.writeObject(confirmString);
oos.close();
os.close();
c.close();
} catch (ClassNotFoundException ex) {
Logger.getLogger(ClientFrame.class.getName()).log(Level.SEVERE, null, ex);
} catch (IOException ex) {
System.err.println(ex.toString());
btnSend.setText("send object");
con.add(btnSend, BorderLayout.PAGE_START);
con.add(txfName, BorderLayout.CENTER);
con.add(txfSurname, BorderLayout.PAGE_END);
this.pack();
setSize(200, 150);
setVisible(true);
public class TestServer {
public static void main(String[] args) {
try {
KeyStore ks = KeyStore.getInstance("JKS");
ks.load(new FileInputStream(ksName), ksPass);
KeyManagerFactory kmf =
KeyManagerFactory.getInstance("SunX509");
kmf.init(ks, ctPass);
SSLContext sc = SSLContext.getInstance("TLS");
sc.init(kmf.getKeyManagers(), null, null);
SSLServerSocketFactory ssf = sc.getServerSocketFactory();
SSLServerSocket s = (SSLServerSocket) ssf.createServerSocket(8888);
printServerSocketInfo(s);
SSLSocket c = (SSLSocket) s.accept();
InputStream is = c.getInputStream();
ObjectInputStream ois = new ObjectInputStream(is);
OutputStream os = c.getOutputStream();
ObjectOutputStream oos = new ObjectOutputStream(os);
boolean done = false;
User u;
while(!done){
u = (User) ois.readObject();
String confirmString = "rcvdOK";
String errorString = "ERROR";
if (u != null) {
System.out.println(u.getFirstName() + " " + u.getLastName());
oos.writeObject(confirmString);
} else if (u == null) {
oos.writeObject(errorString);
is.close();
s.close();
c.close();
} catch (Exception e) {
System.err.println(e.toString());
}Thanks for any help, btw this doesnt need to be via ssl, the problem would be the same using only http. Please anyone help me:)
Edited by: Vencicek on 7.5.2012 2:19
Edited by: EJP on 7/05/2012 19:53
Edited by: Vencicek on 7.5.2012 3:36Current code fails because it's sending still the same entity again(using while loop)No it's not. You are creating a new User object every time around the loop.
which makes the system freezeWhich means that you are executing network code in the event thread. Don't do that, use a separate thread. At the moment you're doing all that sending inside the constructor for ClientFrame which is an even worse idea: you can never get out of there to the rest of your client program. This is a program design problem, not a networking problem.
and doesn't allow me to set new parameters of the new entityI do not understand.
I need to find a way to keep Server running even when the client doesn't send any data and wait until the client doesnt press the send button again to read a new object.That's exactly what happens. readObject() blocks until data is received. -
Have Operating System 10.6.8, Mail Program 4.6.
How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
HelpHave Operating System 10.6.8, Mail Program 4.6.
How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
Help -
Date converting to less one day while transferring from client to server
Hi,
I have very typical problem. My application is in java, we are using oralce 9ias. The problem when the server is running in german locale and client is running in english. We the date value is passed from client to server it is converting to one day less.
i.e.
If i want to search with records jan 02,2005,
on server side if we print the value it is getting as jan 01,2005.
Can anybody help me in solving the above problem.
Its bit very urgent.
Thanks in advance
regards
Kalyanwell, i have had nightmares with this problem. here are the reason and soln:
reason:
in ur DB, u r using a field "Date" which does not include time information. Hence, any date will be taken at 00:00:00. If such a date is opened in some other timezone, which is ahead of the server timezone, the date differs by one. This is becoz java always considers the millisecond info encapsulated in the date, calendar.
soln:
Step 1:
u must be able to get the "timeZoneOffset" from a calendar object. This timeZoneOffset will give the number of minutes/seconds/hours... by which the system is offset from GMT.
Thus if u create a calendar in India, the timeZoneOffset will be 330. If you create the calendar in UK, it will be 0.
To achieve this, we have made an object-UTCDate. This class encapsulates a Calendar. It has a function called "getTimeZoneOffset".
Step 2:
Once u get the timeZoneOffset, here is what u need to do in ur code. (assume that the timeZoneOffset is in minutes. the variable names will be self-explanatory)
at the client side code:
long timeInMillis = calendar.getTime().getTime() + (timeZoneOffsetOfTheCalendarReceivedFromServer * 60 * 1000 ) - (timeZoneOffsetOfClient * 60 * 60 )
use timeInMillis to make a new Date Object and use this date object.
at the server side code:
long timeInMillis = calendar.getTime().getTime() + (timeZoneOffsetOfTheCalendarReceivedFromClient * 60 * 1000 ) - (timeZoneOffsetOfServer * 60 * 60 )
hope this helps.
regards -
Converting date value one day less while transfering from client to server
Hi,
I have very typical problem. My application is in java, we are using oralce 9ias. The problem when the server is running in german locale and client is running in english. We the date value is passed from client to server it is converting to one day less.
i.e.
If i want to search with records jan 02,2005,
on server side if we print the value it is getting as jan 01,2005.
Can anybody help me in solving the above problem.
Its bit very urgent.
Thanks in advance
regards
Kalyan// to get current time in Germany
Calendar cal = new GregorianCalendar(TimeZone.getTimeZone("Germany"));
int hour12 = cal.get(Calendar.HOUR);
int minutes = cal.get(Calendar.MINUTE);
int seconds = cal.get(Calendar.SECOND);
boolean am = cal.get(Calendar.AM_PM) == Calendar.AM;
//I think all you need to do is to set the timezone to the current, so that when the
//server at some other timezone gets this date it knows that this date belongs to
//different timezone and gets converted automatically according to the server
//timezone settings.
// Set the current local timezone
cal.setTimeZone(TimeZone.getDefault());
int hour24 = cal.get(Calendar.HOUR);
Hope this answers your question. Good luck.
-Sreekanth varidhireddy -
Stream-in images from client to server,without running the transmit code
Hello all,
Im using JMF for my current project.Right now,I am trying to only recieve images from the client without the client transmitting it.That is I dont want the transmit code to run on the client.
I should just be able to stream in the images from client to server, without running the transmit code on client.
Can this be done?
Thanks in advancesuppigs wrote:
Can I know more about this?Sure.
<Side A>
You'd just need to write an application that doesn't have a GUI (so, a console-based application) that listens on some pre-determined port for a message to start broadcasting. Maybe you'd send it the IP/PORT number to start broadcasting on. Once it receives that message, it'd start broadcasting the web cam to the IP/PORT number until it received a message to stop. Once it stops, it'll just go back to waiting for the next "start" signal.
<Side B>
On the other side, you'd write an application that sends the start messages, receives/displays the videos, and then sends the stop signal. This will have a GUI, and be your "control program" so to speak.
Then, once of have both of those programs working...if you're using Linux, you're done. If you're using Windows, you'd need to modify the <Side A> program so that it can run as a Windows service.
There are a lot of ways to do this, you can google it or look at the following link:
[http://twit88.com/blog/2007/09/19/open-source-software-to-start-up-java-as-windows-serviceunix-daemon/] -
How to deploy Forms, Reports and Menu from Client to Server machine
Dear Experts,
I have one requirement to deploy the Forms, Reports and Menu from client machine to server machine.
Deployment involves the following steps :
1. Firstly we have to search the selected file in a folder where the .fmx is present ( in Server machine) and take the back up of the the existing file in the server (Source and destination paths will be available).
Ex. If the existing FMB name is TEST.fmx then the backup file should be TEST_sysdate.fmx.
2. Secondly we have to transfer the file from the client folder (or from another folder of the same server) to the server folder where the back up exists.
Please help me to search/rename/copy/replace the _.fmx/.rdf/.rep/.mmx_ files from client to server.
We are using
9i Database.
10g Forms and reports.
SQL Developer tool.
OS is Windows (Client and Server).
Help me out to attach a file of front end screen which we are planning to develop. It will give a clear picture on this requirement.
Thanks :)
Edited by: 941175 on Jun 17, 2012 9:09 AM
Edited by: 941175 on Jun 17, 2012 9:12 AM
Edited by: 941175 on Jun 17, 2012 9:14 AM941175
Welcome to the forum. Please take a while to go through the FAQ to be found to the top right of the page.
Your issue is more to do with batch files rather than Forms. The only relation with Forms, as I see it, is that you will be using HOST/CLIENT_HOST to start a batch file with the file name to be deployed as a parameter passed to it.
You need to rewrite either a CMD batch file or a Powershell script to achieve what have set out to do.
For CMD batch files look up http://www.robvanderwoude.com/battech.php , or any of the other excellent resources available on the internet.
Regards, -
Transfer file from client to server using http
HI friends,
I want to transfer files from client to server...I tried that with the help of socket and rmi..........
But Http is only the best mechanism for my application..........
Without using servlets, how to transfer files with the help of http.....
Any help would be appreciated.......Google is your friend, and appearently www.jguru.com also:
http://www.jguru.com/faq/view.jsp?EID=160 -
FLEX 2.0 and Flash Media Server 2.0 Unable to stream from client to server
Hi All,
I have been trying to put together a quick demo to stream
and record audio from Client to Server. I get this error when
trying to connect to FMS.
ArgumentError: Error #2126: NetConnection object must be
connected.
at flash.net::NetStream/flash.net:NetStream::construct()
at flash.net::NetStream$iinit()
at Audio/toggle()
at Audio/__submit_click()
my Program fails at this line - ns = new NetStream(nc);
Your help is greatly appreciated. Here is the MXML file
Audio.mxml
This file contains a simple start and stop button start and
stop audio processing.
This page is served from Apache Tomcat on host : demoserver1
and port 8080
Flash media server is also installed on the same host
demoserver1.
I did not do any additional config at FMS except creating an
application called "DemoApp". All other settings are defaults.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
applicationComplete="startup()">
<mx:Script>
<![CDATA[
import flash.net.NetConnection;
import flash.net.NetStream;
public var started:Boolean = false;
public var nc:NetConnection;
public var ns:NetStream;
public var mp:Microphone;
public function startup():void{
lblMessage.text="Stopped";
public function toggle():void{
if (started==false){
submit.label="Stop";
started=true;
lblMessage.text="Started";
nc = new NetConnection();
nc.addEventListener(NetStatusEvent.NET_STATUS,
netStatusHandler);
nc.addEventListener(SecurityErrorEvent.SECURITY_ERROR,
securityErrorHandler);
nc.objectEncoding = flash.net.ObjectEncoding.AMF0;
nc.connect("rtmp://demoserver1/DemoApp");
ns = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS,
netStatusHandler);
mp = Microphone.getMicrophone(0);
ns.attachAudio(mp);
ns.publish("sample1", "record");
else{
started=false;
submit.label="Start";
lblMessage.text="Stopped";
ns.close();
nc.close();
private function netStatusHandler(event:NetStatusEvent):void
switch (event.info.code) {
case "NetConnection.Connect.Success":
trace(" connection success : " );
break;
case "NetStream.Play.StreamNotFound":
trace("Stream not found: " );
break;
private function
securityErrorHandler(event:SecurityErrorEvent):void {
trace("securityErrorHandler: " + event);
]]>
</mx:Script>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
width="400"
height="300">
<mx:HBox left="19" right="0" height="100" top="30">
<mx:Label text="Label" id="lblMessage" width="150"/>
<mx:Button label="Start" click="toggle()" id="submit"/>
</mx:HBox>
</mx:Canvas>
</mx:Application>Hi,
Are you trying to make an air app or a web application (flash) for streaming? You may want to check out the osmf framework to help you write a player for mobile platform. Check out http://www.opensourcemediaframework.com/ for more info on how you can write streaming video players using this framework. There are some good tutorials there and also you may post on the forum to get your specific queries solved.
Thanks,
Abhishek -
How to Serialize a file path from client to server?
I am using serializing concepts in java. I am stuck, that how can i send only file path from client to server?
Um, ill take a wild guess and say that youre trying to
access a file on another computer using that path?
That wont work.
What could the other computer possible do
with that path unless both computers are networked to a
common drive, or if they are networked to each other in a way
where the root in the file path would point to the same place
on either computer? -
Urgent - Upload a file from Client to Server.
Need to load a file from the client machine to the Server running 9iAS Rel. 1 on a HP Unix Machine.
We are using Forms 6i. We have looked into the File Upload Utility demo code provided with Forms 6i - but have been unsuccessful in reusing it. PLS HELPDuplicate post.
Upload a file from client to server by forms in E-Bussiness Suite R12
Re: Upload a file from client to server by forms in E-Bussiness Suite R12. -
How to send multiple objects from Client to Server
Hi
I have a simple Client - Server architecture. I am trying to send 5 objects from Client to the Server which the server would operate on.
In the past I've used PrintWriter to pass Strings from Client to Server but now when I am dealing with multiple Objects and PrintWriter not allowing sending of Arrays or ArrayList, how can I send these from the Client to the Server? What would be a good writer to use for this purpose?
Thanks!Thanks, I am looking into ObjectOutputStream but from the API it appears I can only send 1 object at a time. I need to send 5 objects per transaction and then send the next group of 5 objects for another transaction.
Could you clarify some more on how to put these objects together as a single Object perhaps?
Thanks -
How to upload file from client to server in servlets.
actually in my application i have to upload file from client m/c to server.
it is not possible through file i/p stream as fileStreams does not work on network. Please mail me if you have any solution to this.
Thank's in advance............Haii roshan
Pls go through this thread..
http://forum.java.sun.com/thread.jspa?forumID=45&threadID=616589
regards
Shanu
Maybe you are looking for
-
Using Federated Security in BizTalk against custom Token Provider and Custom Token
Hi, I as the topic states, I'm trying to get BizTalk to use a Custom Token Provider with custom tokens. So I thought this would be rather painless using ws2007FederationHttpBinding but got stuck. The problem is that the service expect soap action and
-
Can somebody help me? Can't import videos that are already on my hard drive
i'm not the most technologically adept person. When it comes to iTunes, i plain stupid. for some reason i can't import videos on my hard drive. they are set to open in iTunes and if i double click on them, iTunes comes up and switches to the video sc
-
Using Oracle Report Builder 10g(Report Builder 9.0.4.2.0), and trying to create a manual data link between two queries. But the problem is that whenever I create a manual data link between two queries my report builder shutoff with this message ârw
-
Firefox and Thunderbird are open. Click on a link in a Thunderbird email & it takes minutes (upwards of 5) to open in Firefox. Close Firefox, leave Thunderbird open. Click on a link in a Thunderbird email and Firefox starts and the link opens without
-
How to find Sales order numbers for List of Deliveries
Hi How to find Sales order numbers for List of Deliveries Thanks Muthu