Change web page using iweb

How can I change my web page using iweb?

Then you would need to publish to one of the 3 options that iWeb provides. Now, MobileMe ceases to exist come June, 30th. If you do not allready have a 3rd party host you will need to get one.
I use ix webhosting. Their plans start as low as $3.95 USD a month & they have excellant customer service.

Similar Messages

How can I add a podcast episode to an existing web page using iWeb?

How can I add an episode to an existing web page using iWeb?
I could probably figure this out but I am afraid if I make changes to the site and re-upload it to the podcast area I will have just doubled it. I see them repeated from time to time.
What is the proper protocal? Thanks
Mac G4 Mac OS X (10.4.3)

Hi apple-owner,
Method 1.
To create this scatter-plot, I selected the whole of Columns A and B. (Shift click on the Column reference tabs).
The plot ignores blank rows, but they are "ready" for new data:
Method 2
If you did not select whole columns, you can extend the "active" rows. Rows 1-5 selected:
Add more data rows and drag the fill handle (small white circle, bottom right) down
Regards,
Ian.

Web page using iweb/mobile me

Why doesn't my web page set up through mobil me come up on the computer when I enter the address with www.me.com/..........It won't load up unless I use only http://me.com/etc.etc..
I want it to load my web page when I enter the address www.me.com/.........What is going on here? I have to advertise this web page and I cannot put it under www. Why?

The url of any website published from iWeb to MobileMe will always be http://web.me.com/username/page name.html. www.me.com only exists to allow you to log into your MobileMe account online.
If you want anything different, then you need to go to a domain name registrar and register a domain name from them and then link it to your MobileMe account. That is the only way.

I add pictures to existing web page using iweb(3.0.1) and new pictures show in all browsers EXCEPT firefox. Previous patches seem only good for iweb 2.X

web page created with iweb (3.0.1). worked great in firefox, then I added additional photos to an existing web page. All other browsers see these new pictures EXCEPT firefox. There seems to have been a previous issue with new pages, but fix appears only fro iweb2.x
== This happened ==
Every time Firefox opened
== new photos added to existing page

Do you see any error messages about getElementsByClassName in the Tools > Error Console ?
That was the problem with content generated with an older version of iWeb.
Content that has been generated with such an older version needs to be regenerated with that never version and uploaded to the web server.
Never versions of iWeb should cause any problems.
Can you post a link?
See https://bugzilla.mozilla.org/show_bug.cgi?id=405903 - iWeb 2.x/iWeb 08 sites with photos or slideshows do not work in Gecko browsers (Bug 405903#c69)

Blocking the ability to download a photo from a web page using iWeb

You guys have been so helpful about helping me make video files and music tracks unavailable for downloading from my site by altering the javascript code on my iDisc. Now I have another problem.
The photo/pictures placeholders in iWeb permit me to place photos on my web pages. Is there a way to alter the code so that the option to drag-copy or download the picture from my site can be disabled?
Thanks for your help!
Jim

Here are some variations that make messing with strings easier.
$LocalPage ='\\server\share\sam1.html'
# build URI
$template= 'https://server/reports/116/output/?start-year={0}&start-month={1}&start-day={2}&days=1&company-code=1'
$d=[datetime]::Today.AddDays(-1)
$uri=$template -f ($d.Year-2000),$d.Month,$d.Day
(Invoke-WebRequest -Uri $uri).Content | Out-File -FilePath $LocalPage -Force
& $LocalPage
¯\_(ツ)_/¯
Nice!
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Edit web page with iweb but using a different computer than it was made on?

in short... i made a web page using iweb 09' on my desktop... it is with a domain name that is with godaddy.com... i have it all working... forwarding to my web page etc.... but... how do i edit my web page using my laptop and iweb.... i can't seem to import or load the page into iweb on my laptop? it was created on my desktop and i can modify and change things on it but not my laptop... what am i doing wrong?
thanks in advance...
josh

Will you be working on the site with both computers over time? If so Old Toad's Tutorial #21 - Managing an iWeb site from multiple Macs with Dropbox. can show you a way to make it easy to keep the domain file current on both Macs.
OT

I updated to os x 10.8.5 today and now I cannot publish changes to my web page through iweb. iweb crashes every time I try to publish

I updated to os x 10.8.5 today and now I cannot publish changes to my web page through iweb. iweb crashes every time I try to publish

First do the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
Next, in Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Resizing pixs for web page use

I have resized the photos to use on MS Frontpage but when the thumbnails are clicked on to be enlarged in the web page they are still too large. How do I make photos usable for web page use?

What version of Elements are you using? How are you now going about creating the thumbnails and larger images? What size are you making the large ones? I suspect all you need to do is change the width and height parameters to something smaller.

How to show modal window without popup in a web page using javascript

Hi,
How to show modal window without popup in a web page using javascript, means when the modalwindow is opened it should not ask for popup blocker alert......
pls help me.....

Thanx for ur reply,
Actually the senario is when i click on a button, another jsp page should be displayed in a modal window without popup, but the functions alert() and confirm() will not accept the url path of the another jsp page...

Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed

We are planning to Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed. I have tried using the AIR appliaction and it worked, But our requirement is NO INSTALL to the user machine for the silent printing. It is just from web page and silent printing to the default printer to the desktop/Laptop. Can anyone share your thoughts and experience with us. It will be very helpful..
For AIR : I tried the thread Re: AIR and PDF showing/silent printing

Hey CodeMonkey & Ross,
Did you either of you ever find a solution? I'm stuck too, it seems I can get remote printing on all these PDFs to work but it just prints a blank page since I've been using Javascript in the browser, not Adobe's (they are Engineering drawings that I do not have permission to edit so I can't just insert code into them but I need to make work instructions). I've been scouring the internet for hours now, it seems that this thread is the only relevant/useful one at this point. No one else was trying to achieve this for similar reasons to mine.
Thanks guys,
Lox

Need help to access a web page using midlet to retrieve some informations

Hi everyone i'm trying to access a web page using midlet to retrieve some informations in text format, the web page is [http://daviddurand.info/D228/?villes|http://daviddurand.info/D228/?villes] for my project.
the problem is that i always get error 10049 in socket::open meaning no adresse could be found i tried IP adresse and still the same.
i managed to recreate the same web page to test it on local and the surprise that it works fine but when accessing it online i have this error.
i tried also to get the page i created on a webserver i own to try it saying that there might be security issues but the same error appears again. so help plz
here is my code :
package mobileapplication5;
import java.io.*;
import javax.microedition.io.*;
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
public class GetMidlet extends MIDlet {
private Display display;
String url = "http://dayaati.com/villes/index.php?villes";
public GetMidlet() {
display = Display.getDisplay(this);
public void startApp() {
try {
getBirthdayFromNameUsingGet(url);
} catch (IOException e) {
System.out.println("IOException " + e);
e.printStackTrace();
public void pauseApp() {   }
public void destroyApp(boolean unconditional) { }
public void getBirthdayFromNameUsingGet(String url) throws IOException {
          HttpConnection httpConn = null;
          InputStream is = null;
          OutputStream os = null;
          try {
httpConn = (HttpConnection)Connector.open(url);
httpConn.setRequestProperty("User-Agent", "Profile/MIDP-2.1 Configuration/CLDC-1.1");
httpConn.setRequestProperty("Content-Language", "en-US" );
httpConn.setRequestProperty("Content-Type", "text/html; charset=iso-8859-1");
httpConn.setRequestProperty( "Connection", "keep-alive" );
httpConn.setRequestProperty("Content-Length","51200");
          getConnectionInformation(httpConn);
          int respCode = httpConn.getResponseCode();
          if (respCode == httpConn.HTTP_OK) {
               StringBuffer sb = new StringBuffer();
               os = httpConn.openOutputStream();
               is = httpConn.openDataInputStream();
               int chr;
               while ((chr = is.read()) != -1)
               sb.append((char) chr);
               // Web Server just returns the birthday in mm/dd/yy format.
               System.out.println(sb.toString());
          else {
               System.out.println("Error in opening HTTP Connection. Error#" + respCode);
          } finally {
               if(is!= null)
               is.close();
               if(os != null)
                    os.close();
          if(httpConn != null)
                    httpConn.close();
void getConnectionInformation(HttpConnection hc) {
System.out.println("Request Method for this connection is " + hc.getRequestMethod());
System.out.println("URL in this connection is " + hc.getURL());
System.out.println("Protocol for this connection is " + hc.getProtocol());
System.out.println("This object is connected to " + hc.getHost() + " host");
System.out.println("HTTP Port in use is " + hc.getPort());
System.out.println("Query parameter in this request are " + hc.getQuery());
**Heeeeeeelp Please**

[http://java.sun.com/javase/6/webnotes/trouble/TSG-VM/html/crashes.html]
SIGSEGV (0xb)Most common cause of that is JNI code used directly or indirectly through a 3rd party library.
64-Bit Server VM (11.2-b01 mixed mode linux-amd64)Conversely that VM gets less traffic than others so you might have hit a bug in it.

I trying to publish a web page from iweb, but it doesn't recognize my MobileMe account

I trying to publish a web page from iweb, but it doesn't recognize my MobileMe accouI trying to publish a web page from iweb, but it doesn't recognize my MobileMe account, what can I do?

MobileMe has been discontinued for over 2 years now. You'll need to find a new hosting server for your website.
This may be of help to you: Life After MobileMe.

IPhoto still won't make web pages using the comments field

I am someone who makes use of the comments field in iPhoto. I don't edit the title, because I thought it edited the photo file name (perhaps only in earlier iPhoto versions). Unfortunately, the Apple's tools for making a web page from iPhoto '08 seem to still use the title field only and not the comment field. That means that I have to edit all titles (to blank or a proper title) if I just want to show an annotation on just a few photos in a web page. At least the comments field defaults to blank, so I normally use it, along with the Better HTML plugin to make web pages, http://www.geeksrus.com/software/betterhtmlexport/
Now, the web pages produced by Apple are now as good as and even better than the BHTML templates, and I'd like to use them. But this problem with the comments means I can't quickly convert my old photo albums to something that makes nice web pages using my annotations with the iPhoto tools.
Does anybody know of any solutions to this problem? E.g. a script to copy the comments field to the title field?

I know what you mean. I can't believe that after so many versions of iPhoto that have supported publishing of some sort that such a basic and obvious feature still hasn't been implemented. It can't take that much effort to add. I'd rather have that than the new (and IMHO completely useless) "Events" feature. Speaking of which, does anyone know if there is a way to turn it off? It's annoying the heck outta me. I hate it.

I started setting up a web page with iWeb. Auto play box is checked, but music will not play when page is opened.

I started setting up a web page with IWeb.
Several proplems so far:
1) Auto Play box checked for music, but music does not start when page is opened.
2) Can't get Quicktime "start/stop" slide to start and finish a section within a long piece of music (classical for example). How does one work the slide bar to do this?

Yes the audio file plays on the iWeb page when I click the play button. I even made sure it played both without the “little boxes” that surround the icon (don’t know the technical name for those), and when I click the music icon without the little boxes.
I did note that the iTunes window that appears when I open the Inspector is not highlighted until I click the music icon and those little boxes appear. Then the Start/Stop, Auto Play, Loop, and Show Movie Controller are highlighted — and work properly.
One other thing. I see that the iWeb icon I am working from says “Domain copy.sites2.” Does that have a bearing on anything?

How to embed 3D models in web page using JAVA?

Hello
I'm doing a project at University to create a virtual tour of a village. I am creating the buildings in MAYA using polygon planes and cubes and then exporting to VRML.
I plan to embed each individual model into a separate web page. Then when the user clicks on a location in a 2D map they will be taken to the web page containing that building.
However, I can't work out how to embed these 3D models into web pages using JAVA. Can anyone help me with this, please?
Also, I've been told to use JAVA 3D to interact with the project but am unclear as to how JAVA 3D would be used in this project - aqny ideas/suggestions welcome!
M.

If you use Java-plugin, you can embed Java3D in a web page.
Here is the URL(http://www.geovista.psu.edu/products/demos/LorenzAttractor3D/index.html) which used Java3D.
I hope this helps.
Masa

Change web page using iweb

Similar Messages

Maybe you are looking for