Change which email is used in autofill

Hi, I've seen similar posts but they've now been archived. In Safari for some strange reason Autofill always wants to autofill using my Kindle email address (only used for sending PDF's etc. I want to read on my Kindle). As my @kindle email and my @gmail adresses are the same it means I have to keep typing until the first letter after the @ before it will change from my Kindle email to my gmail. I've had a look in Contacts and my gmail address is listed first and I can't see any way to make this the default email.
Anyone have any ideas?
Thanks in advance.

Thanks for attempting to help.
"Safari menu > Preferences... > AutoFill
Edit the appropriate information."
From autofill in Safari when I click on Edit it just takes me to my card in the Contacts app.
"If that does not accomplish what you expect, delete the email address in your Contacts card that you do not want Safari to use. Complete a form in Safari that autofills your @gmail address, then add your @kindle address to the Contacts card at a later time."
I've deleted the Kindle email address however I'm not sure about a website where I have to use my contact autofill that I don't already belong to - any ideas?

Similar Messages

  • HT201363 I want to change the email address used as rescue email for my security questions. But I can't remember the answers to the security questions and I dont have access to the rescue email anymore. Please help.

    I want to change the email address used as rescue email for my security questions. But I can't remember the answers to the security questions and I dont have access to the rescue email anymore. Please help.

    -If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com.  Clicking the link will send the reset to your rescue email address (NOTE:  This is not the same address as your Apple ID email)
    -If there is no link on the page, then you didn't establish a rescue email address.  Contact AppleCare at 800.694.7466 (If you are in the US), and ask for account security.  You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
    -If you are not in the US, click http://support.apple.com/kb/HT5699 - Apple ID: Contacting Apple for help with Apple ID account security
    HTH

  • I do not know which email i used for the my old apple ID.

    I do not know which email i used for the my old apple ID. All I know is that it goes C*****@gmail.com. Is there any way for me to figure out my username or email used for the apple id without having the username or email logged in?

    You need to try each one you think it might be, or try using Apple’s iForgot service, or if you’re the device’s original owner, take it and its purchase receipt to a physical Apple Store.
    (117341)

  • How can I change which email messages I wish to receive from Apple?

    With the exception of Apple advertisements, I am currently not receiving email messages from Apple at my primary email address.  This includes receipts, including a receipt for a new laptop purchased two weeks ago.  I had to call the store and ask them to send the receipt to my secondary email address.  I was just on the phone with AppleCare support and was told I can manage what I do and do not wish to receive from Apple, and at which email address I wish to receive messages.  All I want to do is re-start receiving email messages from Apple.

    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
    You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.

  • How can I change the email address used to authorize my computer?

    I borrowed ebooks from a public library using a different email address which I should have used to authorized my computer hosting the adobe digital edition. Is there a way to modify the email address used to authorize my computer as I get an error message when I try to return the books. Thanks

    This says it was assumed answered but where is the answer?  I've gone thru the Help processes to do this but it doesn't change.  The old address is still there.  I have trouble returning books to the library and getting new books.

  • HT5312 How do you change the email address used to send security answers?

    How do you change the email used to send the security answers you have forgotten? I have changed the alternative email adress in Name, ID and Email Addresses but this does not change the email address in the Password and Security section.

    Jus what do you want to accomplish? The Apple ID email address is used for variosu thing onthe iPod like:
    - For purchasing media. Srrings.iTunes and App stores. Sing out and sign into anoterh account
    - Settings>iCLoudl for iCloud account
    - Settings>FaceRome for Apple ID and where You can Be Reached At email address
    - Settings>Messages for Send And Receive email address.
    - Maybe for Game Center

  • Change primary email address using the Skype app

    I am automatically logged in to Skype on my iPad however I don't remember the password (it is saved automatically and every time I turn on my iPad it automatically logs me into skype)
    The problem is I forgot the password. And I don't have access to the email address associated with the account.
    How can I change my primary email address using the Skype app?
    Thank you for your help!!!!!

    Alzee2 wrote:
    I am automatically logged in to Skype on my iPad however I don't remember the password (it is saved automatically and every time I turn on my iPad it automatically logs me into skype)
    The problem is I forgot the password. And I don't have access to the email address associated with the account.
    How can I change my primary email address using the Skype app?
    Thank you for your help!!!!!
    Open the link below and just select the appropriate option/category in your case.
    https://support.skype.com/en/faq/FA109/i-ve-forgotten-my-password
    please also be advised that you may be asked to provide verification details or answer verification questions before Skype can proceed in assisting you resetting your account password.  Then after you regain access to your account, you can change your registered email address to your preferred one.
    IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
    ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
    SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
    | skypefordummies.blogspot.com | 

  • Changing the eMail address used as my Adobe ID

    I am unable to change the eMail address that I use as my Adobe ID.  I enter a new eMail address, press "send verification eMail", and nothing happens - I have done it five times, believe me.
    How are you going to help me?  The eMail address that I am trying to move away from is one of the 153 million that was stolen in the Adobe hack.

    Johnf40545851 I was moving your forum post to a more related to your topic as it is not downloading or installation related.
    I would recommend reviewing Adobe ID, sign in, and account help for information on how to change the e-mail address associated with your Adobe ID.  If you have additional questions then please contact our support team directly at Contact Customer Care.

  • HT3965 how do i change my email address used for apps

    i have input my email addres incorrect so am not able to use apps, can you please advise how i change it

    Note: Content bought using one Apple ID cannot be merged or transferred to another Apple ID.
    Settings > iTunes & App Store > Apple ID: > Sign out and sign in with the correct Apple ID. 

  • Siri wants to know which email to use to send a text message?

    I have an iPhone 4s now running 6.1.1 and when I asked Siri to let my brother know I am on my way it askes me which email address to use.
    Back when I was running iOS 5.1.1 it would simple say here is your message to ... would you like to send it?
    Is anyone else having this issue?
    Is it just a config issue?
    Cheers
    Andy

    Check out Device Central it comes with CS3 CS4 as far I know.
    That should help you with your quest.
    (Device Central) if you've never heard of if, it's for cell
    phone apps.

  • "send link" function - how do I change the email address used

    When I use the "send link" function whilst using Safari on my iPad IOS 7.1.2, it now sends it from a secondary email address I have added in Mail.
    This is not my main email address (and the one I have set as my default), which is the one it has always used until recently.
    How do I change it back to my default please?

    The email address you want to use must be on your card in Address Book. Where there are multiple addresses on your card you can change between them in an iCal alarm by clicking the arrow to the right of the current address.
    AK

  • Can I change which nic is used for a cluster network when more than one nic on the node is on same subnet?

    This cluster has been up and working for maybe a year and a half the way it is.  There are two nodes, running Server 2012.  In addition to a couple network interfaces devoted to VM traffic each node has:
    Management Interface: 192.168.1.0/24
    iSCSI Interface: 192.168.1.0/24
    Internal Cluster Interface: 192.168.99.0/24
    The iSCSI interfaces have to be on same subnet as management interfaces due to limitations in the shared storage.  Basically if I segregate it I wouldn't be able access the shared storage itself for any kind of management or maintenance tasks. 
    I have restricted the iSCSI traffic to only use the one interface on each cluster node but I noticed that one of the cluster networks is connecting the management interface on one cluster node member with the iSCSI interface on the other cluster node member. 
    I would like for the cluster network to be using the management interface on both cluster node members so as not to interfere with iSCSI traffic.  Can I change this?
    Binding order of interfaces is the same on both boxes but maybe I did that after I created the cluster, not sure. 

    Hi MnM Show,
    Tim is correct, if you are using ISCSI Storage and using the network to get to it, it is recommended that the iSCSI Storage fabric have a dedicated and isolated network. This
    network should be disabled for Cluster communications so that the network is dedicated to only storage related traffic.
    This prevents intra-cluster communication as well as CSV traffic from flowing over same network. During the creation of the Cluster, ISCSI traffic will be detected and the network
    will be disabled from Cluster use. This network should set to lowest in the binding order.
    The related article:
    Configuring Windows Failover Cluster Networks
    http://blogs.technet.com/b/askcore/archive/2014/02/20/configuring-windows-failover-cluster-networks.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Your new "one click search" is garbage. The old way of changing which engine to use by using ctrl+up and ctrl+down was perfect. How do I change it back?

    I get that you're trying to be more "user-friendly" by letting people using the mouse, but at least let me switch back to how it was before, which was better and faster.

    hello rodrigolinhares, at least for the moment it's still possible to change back to the old interface: enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''browser.search.showOneOffButtons'''. double-click it and change its value to '''false''' (this will take a restart of the browser to have an effect)

  • How can I control which email FaceTime uses?

    When my daughter uses FaceTime from her Mac, both my wife's and my iPads ring.  She would like to be able to choose to FaceTime just one of us at a time.  When she initiates the call from her Mac, she chooses my wife's email address, but I also get the call even though that address is not entered in my iPad's FaceTime settings as an address that I can be reached at.  The same happens if she tries to call just me, my wife also gets the call.  My wife and I have no email addresses listed on our FaceTime settings in common.  The thing we do have in common is an Apple ID with the credit card we share, so all purchases are done through that Apple ID.  My wife has a separate Apple ID on her iPad for everything else though.
    Any ideas on how to allow my daughter to choose which of us that she'd like to contact?

    For Apple IDs, we have:
    My iPad:  [email protected] (this is our shared account with credit card for purchases)
    Wife's iPad:  [email protected]
    Daughter's Mac:  daughter [email protected]
    We don't have iPhones, so there are no phone numbers in our settings for how we can be reached.  None of us share the same email addresses in our "You can be reached at" settings.  My wife had her work email address there, along with her AppleID address, but the work email said "verifying" next to it, but that has probably said that for years.  My daughter tried that email, and my wife's Apple ID emails, and every time my iPad also rang.  Even after my wife completely removed her work email, my daughter was able to make a FaceTime call to that address and got both of us.
    I appreciate your help on this, but these were what I thought were obvious settings to check and already checked them all.  What seems to be obvious to both of us, is not working.  Weird.

  • Cannot change default email when using MDM

    I use an MDM (AirWatch) to setup Exchange ActivSync email for all my users.  It sets up a profile with the user's email.  If they have other personal email addresses on the phone, they cannot change the default email to Exchange email that I setup through the MDM.  It is not an option in the Settings-Mail/Contacts/Calendars-Default Account field.
    The option to change the default account for the default Calendar is there, but not for email.
    When I email by clicking on an email address in a website it opens Mail, but the Exchange email is not option.
    If I manually setup the Exchange email I can select it as default.
    If there are no other personal emails setup the Exchange that is setup from the MDM it will mail from that account.
    Any thoughts?

    I figured out the issue.  The MDM (AirWatch) has a feature of the ActivSync setup called "Prevent use from third party apps"
    This stops the Exchange ActivSync email account from being able to be set as the default account  Settings-Mail/Contacts/Calendars-Default Account field.
    I do not know why they think that the Safari browser built into the phone as a "third party app" but atleast we are working. 

Maybe you are looking for

  • I keep getting error code 0x800700570 when trying to install Windows 7 via BootCamp.

    I have tried several times to install Windows 7 on an iMac 3.4 GHz i7 running 10.7.2. I have installed Windows several times in the past to other computers without problems. I have tried 4 or 5 times and removed the partition in between each attempt,

  • Imessage is not activating on my number

    imessage will not activate on my phone number, it only activates on my email. It does not even show my number part of the imessage options! Please help!

  • How to retrieve data from virtual infotype?

    Hi. I'm trying to write an ABAP program that's retrieving data from infotype 2501. If i'm looking at this table PA2501 from SE16, i can see that it's empty, but... I have an HR program that's using the PNP and i can see in debbuging mode allot of dat

  • File - XI -WebService Scenario Question

    XI is using Receiver SOAP Adapter to trigger webservice. This scenario is executed every 15 mins. Webservice admin saying that there are 10 to 15 Xi user Ids at any given point time in the receiving server. Why does the User Id stays active even afte

  • How to display task descriptions in shopping cart approval screen

    Hi, We are implementing SRM 7.01. We'd like to display descriptions of shopping cart approval task, which is defined in: transaction: PFTC in the 'Description' tab Text type : 0120 Task Description Currently only work item text is displayed in the UW