Change wifi IP address?
I have a few PC on my home network and my iphone works poorly on a wifi connection because it is using the same IP adress as another PC. Is it possible on the phone to change its IP address?
Go into your router settings and assign each wireless device a constant IP address so this does not happen.
Similar Messages
-
Changing WiFi MAC Address in Leopard
Hello,
I am attempting to change my wireless MAC address. Here's what I've done, yet nothing changes (I am attmepting to change my Wifi address from 00:1c:b3:70:e9:f2 to a1:b2:c3:d4:e5:f6):
ryans-imac:~ Ryan$ ifconfig en1
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:b3ff:fe70:e9f2%en1 prefixlen 64 scopeid 0x6
inet 192.168.0.101 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:1c:b3:70:e9:f2
media: autoselect status: active
supported media: autoselect
ryans-imac:~ Ryan$ sudo ifconfig en1 ether a1:b2:c3:d4:e5:f6
Password:
ryans-imac:~ Ryan$
Please advise.
Thanks.etresoft wrote:
What you want is the "airport" program, conveniently located at /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resourc es/airport
It will allow you to change your MAC address. Prior to 10.5, the airport command would not change the MAC address for the Airport card, but it works now.
Here is the airport help
./airport AirPort v.522.4 (522.4.0)
Supported arguments:
-z --disassociate Disassociate from any network
-i[<arg>] --ibss=[<arg>] Create IBSS
-x --xml Print info as XML
-s[<arg>] --scan=[<arg>] Perform a wireless broadcast scan.
Will perform a directed scan if the optional <arg> is provided
-r<arg> --repeats=<arg> Repeat the command the specified number of times
-A[<arg>] --associate=[<arg>] Associate to network.
Will prompt for network name if arg is not specified
and if necessary, for a password if the network is using WEP or WPA.
The following additional arguments may be specified with this command:
--bssid=<arg> Specify BSSID to associate with
--password=<arg> Specify a WEP key or WPA password
-I --getinfo Print current wireless status, e.g. signal info, BSSID, port type etc.
-P<arg> --psk=<arg> Create PSK from specified pass phrase and SSID.
The following additional arguments must be specified with this command:
--ssid=<arg> Specify SSID when creating a PSK
-c[<arg>] --channel=[<arg>] Set arbitrary channel on the card
-h --help Show this help
It's not clear to me which command if any will allow a MAC change -
My wife currently has two different Itunes account as one is on the old computer with our old email address, Instead of changing the email address on the old account we created a new itunes account with her new gmail address. I just updated the new update for her iphone however I cannot get her contacts etc moved to the new phone as I believe they are all on her old account. It says I need as well to authorize this computer for the itunes store as well but in her account it says one computer authorized (old one) but cannot figure our how to get the new computer authorized as well.
You should be able to authorise the account via the Store drop-down menu at the top of iTunes (if you are using iTunes 11 on a PC then control-B should get the menus to show)
e.g. -
Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.
Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.
Adapter: Ralink RT3070 Chipset wifi adapter
Tested: os Windows 8.1 Professional
Hot Spot: 802.11b
The first problem windows 7-8.1 got IP adress and connect he public HotSpot but cannot load login page or any other page. It does not work with it.
The second problem Wifi canrd/configure/Advandes (No network adress change function).Tested with the default windows driver and the ralink rt 3070 driver the same problem.On windows XP the same function the same driver works perfectly.
multiple users to have expressed interest in the problem But Microsoft not corrected the problem window7-8.1 10?
lizardsystems.com/wiki/change_mac_address/faq/change_mac_address_in_windows_7
blog.technitium.com/2011/05/tmac-issue-with-wireless-network.html
superuser.com/questions/519189/how-to-change-the-mac-address-in-win-8-to-spoof-a-roku-player-through-a-wifi-spl
social.technet.microsoft.com/Forums/windows/en-US/59e07df3-471c-499e-ad5f-e7cb507595df/cannot-change-mac-address-in-windows-7-driver-has-option-doesnt-work-neither-does-regedit-ms?forum=w7itpronetworking
networksteve.com/windows/topic.php/CANNOT_CHANGE_WIRELESS_%28SPOOF%29_MAC_ADDRESS_ON_WINDOWS_7/?TopicId=16810&Posts=1
On windows XP or linux have a MAC adress Change function allow 00 mac adress and another normal mac adress range.On windows 8.1 all Mac changer program dont work.This 2,6,A,E on second adress are not vaild Mac adress. You simply can not use normal MAC
addresses on windows 8.1.When i connect the usb the Pc windows 8.1 recognizes the adapter but the default driver and the downloaded ralink driver the same problem.On windows xp the current driver works perfectly have (Local Mac Network Adress) funktion
and works with the 802.11b hot spot.I got the internet my PC and laptop too public HotSpots and another wifi HotSpots if wont work correctly i can not use neither the windows 7,8,8.1 or 10. Many users have expressed interest in the problem more forums.
The 3. problem im tested in virtualbox the windows 7 and 8.1 on 8.1 (on the blue wifi platform) not show correctly the signal strengh. On windows 7 show this correctly.The windows 7-8.1 Configure/advanced the advanced options on Ralink 3070 the default (windows
driver) somehow downgraded function is less than for Xp. Configure/advanced the advanced options (needs to be upgraded in the future) because it does not advance but rather regressed.
Today it is very common these wi-fi technology increasingly used (hotels,Public Hots Spots,Internet coffe,) growing free bublic wifi projects. The wifi funktions on windows need debugging and modernize.The quality of Wi-Fi is now the operating system
is now a thing order which is not good then the operating system is unusable.Hi,
For changing the MAC address for Windows 7 is designed with some limitation, we cannot get over it. Thanks for your understanding.
Under Windows 7, the possible range of spoofed addresses for wireless adapters that can be set is limited. To be used by Windows 7, a spoofed MAC address should have 0 as a least significant bit (unicast) and 1 as a second least significant
bit (locally administered) in the second nibble. Thus possible values for the second nibble are limited to 2, 6, A and E.
In other words
MAC address: “XY-XX-XX-XX-XX-XX” “X” can be anything hexadecimal. The hexadecimal “Y”, written in binary format, is Y: “kmnp”, where “p” is the least significant bit;
p=0 --> unicast;
p=1 --> multicast;
n=0 --> globally assigned MAC;
n=1 --> locally administered;
So, actually MAC can be changed to any combination in which p=0 and n=1;
“Y” can be 2, 6, A or E.
So the possible MAC addresses in Windows 7 for wireless adapters:
X2-XX-XX-XX-XX-XX
X6-XX-XX-XX-XX-XX
XA-XX-XX-XX-XX-XX
XE-XX-XX-XX-XX-XX
For the wifi hotspot issue, please check this blog to see if it can be helpful.
Windows 7 Connectivity Problems in Public Hotspots
http://blogs.technet.com/b/patrickr/archive/2010/07/28/windows-7-connectivity-problems-in-public-hotspots.aspx
Kate Li
TechNet Community Support -
Hi,
We moved to a new location and using comcast as ISP. I was setting up the phone system today and met a few problems.
1. First of all, all the phones are connected and working(total of 4), but I can only see 3 of them showing up in the CCA. Whats happening here?
2. I wanted to change the user name which appears on the phone using the CCA, CCA told me that the settings were successfully sent to UC520, I restarted the phone and uc520, but the names on the phones remain unchanged?
3. I forgot the password of the voicemail for one of the phone, and wanted to changed in the CUE. so I went to 10.1.10.1,but some comcast login page showed up instead of CUE. so I want to know how to change the IP address of CUE? I don`t know the CLI commands so please teach me if it can only be done with CLI. I have only used CCA in the past. Could this be the reason why for problem 1 and 2? I`m feeling wierd because all the phones can be used to call in/out.
my data vlan is 192.168.0.0 and voice vlan is 192.168.2.0 let me know if you need any other info.
need help urgently as I want to resolve this problem asap.
Thanks in advance.
Building configuration...
Current configuration : 31483 bytes
! Last configuration change at 19:39:02 EST Mon Jan 27 2014 by admin
version 15.1
parser config cache interface
no service pad
no service timestamps debug uptime
service timestamps log datetime msec
service password-encryption
service internal
service compress-config
service sequence-numbers
hostname UC_520
boot-start-marker
boot-end-marker
no logging buffered
no logging rate-limit
enable secret 4 X4ZqtPJ///KxuEWxHSsJrv3beQVnz2ise/xj8fF6eFU
aaa new-model
aaa authentication login default local
aaa session-id common
clock timezone EST -5 0
clock summer-time EDT recurring
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-3885458945
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3885458945
revocation-check none
rsakeypair TP-self-signed-3885458945
crypto pki certificate chain TP-self-signed-3885458945
certificate self-signed 01
3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33383835 34353839 3435301E 170D3133 30383136 32303534
32305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 38383534
35383934 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100E470 89FBE9D2 67ED2223 338A6991 0CF59918 BDEF6020 545DFCAF 93A17C39
BEE49E0E 4EDEE26B CCE65E3E 44443BFC E1CE6B5E FE8906DA 3290C015 450721F3
8FB997D1 74A9EAD1 2FB11EAF 7E346F69 4AF873DE A93DCCC0 0607406E 09C0D5D4
47552B50 34398AF9 A5F9CC57 1A2CBCE8 D8DCE2E9 6702F3DD 77505122 2284BDC8
96730203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
551D2304 18301680 14F3FB0C E861F89C 588B7B22 97DCB6B8 95F52EAF 3F301D06
03551D0E 04160414 F3FB0CE8 61F89C58 8B7B2297 DCB6B895 F52EAF3F 300D0609
2A864886 F70D0101 05050003 81810067 7B14BD34 CF6FE9A5 C2B125A9 347023AD
58DAB6CB E64FA260 41DA2B0B 1921A21D BAED2A0F 47172233 A589F64D 74D70BB5
2790DE19 B905BCFF 18DB2EE5 F397C92D 7522DEB0 B4968E27 0F2CCF98 DCCE40C5
4BF1736A 1C945AFA E0EF7A33 E529F94C CC99549A 051CA1BD E33495DB 0B79451C
5666954E 10E691DF 5D5CCC50 CB72D2
quit
dot11 syslog
dot11 ssid cisco-data
vlan 1
authentication open
dot11 ssid cisco-voice
vlan 100
authentication open
ip source-route
ip cef
ip dhcp relay information trust-all
ip dhcp excluded-address 192.168.0.1 192.168.0.99
ip dhcp excluded-address 192.168.0.151 192.168.0.255
ip dhcp excluded-address 192.168.2.1 192.168.2.9
ip dhcp excluded-address 192.168.2.241 192.168.2.255
ip dhcp excluded-address 192.168.2.99
ip dhcp pool phone
network 192.168.2.0 255.255.255.0
default-router 192.168.2.99
option 150 ip 192.168.2.99
ip name-server 205.152.111.23
ip name-server 205.152.144.23
ip inspect WAAS flush-timeout 10
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp router-traffic
ip inspect name SDM_LOW udp router-traffic
ip inspect name SDM_LOW vdolive
no ipv6 cef
multilink bundle-name authenticated
stcapp ccm-group 1
stcapp
trunk group ALL_FXO
max-retry 5
voice-class cause-code 1
hunt-scheme longest-idle
voice call send-alert
voice rtp send-recv
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
sip
no update-callerid
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
voice class cause-code 1
no-circuit
voice register global
mode cme
source-address 192.168.2.99 port 5060
max-dn 88
max-pool 22
load 9971 sip9971.9-2-2
load 9951 sip9951.9-2-2
load 8961 sip8961.9-2-2
timezone 12
create profile sync 0423457390373118
voice hunt-group 1 parallel
final 201
list 201,223,227,239,301
timeout 16
pilot 511
voice translation-rule 1000
rule 1 /.*/ //
voice translation-rule 1112
rule 1 /^9/ //
voice translation-rule 2001
voice translation-rule 2002
rule 1 /^6/ //
voice translation-rule 2222
rule 1 /^91900......./ //
rule 2 /^91976......./ //
voice translation-profile CALLER_ID_TRANSLATION_PROFILE
translate calling 1111
voice translation-profile CallBlocking
translate called 2222
voice translation-profile OUTGOING_TRANSLATION_PROFILE
translate called 1112
voice translation-profile XFER_TO_VM_PROFILE
translate redirect-called 2002
voice translation-profile nondialable
translate called 1000
voice-card 0
fax interface-type fax-mail
license udi pid UC520W-16U-4FXO-K9 sn FTX1251Y0DC
archive
log config
logging enable
logging size 600
hidekeys
username admin privilege 15 secret 4 X4ZqtPJ///KxuEWxHSsJrv3beQVnz2ise/xj8fF6eFU
ip tftp source-interface Loopback0
class-map match-all _class_Voice0
match ip dscp ef
class-map match-all _class_Voice1
match ip dscp cs3
policy-map Voice
class _class_Voice0
set cos 6
class _class_Voice1
set cos 3
bridge irb
interface Loopback0
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip access-group 101 in
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/0
description $ETH-WAN$
no ip address
ip virtual-reassembly in
load-interval 30
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface Integrated-Service-Engine0/0
description cue is initialized with default IMAP group
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly in
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface FastEthernet0/1/0
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/1
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/2
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/3
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/4
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/5
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/6
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/7
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/8
switchport mode trunk
switchport voice vlan 100
no ip address
macro description cisco-switch
interface Dot11Radio0/5/0
no ip address
ssid cisco-data
ssid cisco-voice
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
antenna receive right
antenna transmit right
service-policy output Voice
interface Dot11Radio0/5/0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0/5/0.100
encapsulation dot1Q 100
bridge-group 100
bridge-group 100 subscriber-loop-control
bridge-group 100 spanning-disabled
bridge-group 100 block-unknown-source
no bridge-group 100 source-learning
no bridge-group 100 unicast-flooding
interface Vlan1
no ip address
bridge-group 1
bridge-group 1 spanning-disabled
interface Vlan100
no ip address
bridge-group 100
bridge-group 100 spanning-disabled
interface Dialer0
description $FW_OUTSIDE$
ip address negotiated
ip access-group 109 in
ip mtu 1452
ip nat outside
ip inspect SDM_LOW out
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname [email protected]
ppp chap password 7 121D001B1E535E56
ppp pap sent-username [email protected] password 7 121D001B1E535E56
ppp ipcp dns request
interface BVI1
ip address 192.168.0.55 255.255.255.0
ip access-group 104 in
ip access-group 108 out
ip helper-address 192.168.0.99
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1412
interface BVI100
description $FW_INSIDE$
ip address 192.168.2.99 255.255.255.0
ip access-group 102 in
ip access-group 107 out
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1412
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip dns server
ip nat inside source list 1 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 192.168.0.99
ip route 10.1.10.1 255.255.255.255 Integrated-Service-Engine0/0
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 10.1.1.0 0.0.0.255
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 1 permit 10.1.10.0 0.0.0.3
access-list 100 remark auto generated by SDM firewall configuration
access-list 100 remark SDM_ACL Category=1
access-list 100 permit ip 192.168.10.0 0.0.0.255 any
access-list 100 deny ip host 255.255.255.255 any
access-list 100 deny ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 101 remark auto generated by SDM firewall configuration##NO_ACES_6##
access-list 101 remark SDM_ACL Category=1
access-list 101 permit tcp 192.168.2.0 0.0.0.255 eq 2000 any
access-list 101 permit udp 192.168.2.0 0.0.0.255 eq 2000 any
access-list 101 permit ip 192.168.2.0 0.0.0.255 any
access-list 101 deny ip host 255.255.255.255 any
access-list 101 deny ip 127.0.0.0 0.255.255.255 any
access-list 101 permit ip any any
access-list 102 remark auto generated by SDM firewall configuration##NO_ACES_6##
access-list 102 remark SDM_ACL Category=1
access-list 102 permit tcp 10.1.10.0 0.0.0.3 any eq 2000
access-list 102 permit udp 10.1.10.0 0.0.0.3 any eq 2000
access-list 102 permit ip 10.1.10.0 0.0.0.3 any
access-list 102 deny ip host 255.255.255.255 any
access-list 102 deny ip 127.0.0.0 0.255.255.255 any
access-list 102 permit ip any any
access-list 103 remark SDM_ACL Category=64
access-list 103 permit ip any any
access-list 104 remark SDM_ACL Category=64
access-list 104 permit ip any any
access-list 105 remark SDM_ACL Category=64
access-list 105 permit ip any any
access-list 106 remark SDM_ACL Category=64
access-list 106 permit ip any any
access-list 107 remark SDM_ACL Category=64
access-list 107 permit ip any any
access-list 108 remark SDM_ACL Category=64
access-list 108 permit ip any any
access-list 109 remark auto generated by SDM firewall configuration##NO_ACES_14##
access-list 109 remark SDM_ACL Category=1
access-list 109 permit ip 10.1.10.0 0.0.0.3 any
access-list 109 permit ip 192.168.2.0 0.0.0.255 any
access-list 109 permit udp host 205.152.111.23 eq domain any
access-list 109 permit udp host 205.152.144.23 eq domain any
access-list 109 permit icmp any any echo-reply
access-list 109 permit icmp any any time-exceeded
access-list 109 permit icmp any any unreachable
access-list 109 permit ip 10.0.0.0 0.255.255.255 any
access-list 109 deny ip 172.16.0.0 0.15.255.255 any
access-list 109 permit ip 192.168.0.0 0.0.255.255 any
access-list 109 deny ip 127.0.0.0 0.255.255.255 any
access-list 109 deny ip host 255.255.255.255 any
access-list 109 permit ip host 0.0.0.0 any
access-list 109 permit ip any any
dialer-list 1 protocol ip permit
snmp-server community public RO
tftp-server flash:/phones/521_524/cp524g-8-1-17.bin alias cp524g-8-1-17.bin
tftp-server flash:/phones/7916/B016-1-0-4.SBN alias B016-1-0-4.SBN
tftp-server flash:/phones/7937/apps37sccp.1-4-4-0.bin alias apps37sccp.1-4-4-0.bin
tftp-server flash:/phones/7940_7960/P00308010200.bin alias P00308010200.bin
tftp-server flash:/phones/7940_7960/P00308010200.loads alias P00308010200.loads
tftp-server flash:/phones/7940_7960/P00308010200.sb2 alias P00308010200.sb2
tftp-server flash:/phones/7940_7960/P00308010200.sbn alias P00308010200.sbn
tftp-server flash:/phones/7941_7961/apps41.9-1-1TH1-16.sbn alias apps41.9-1-1TH1-16.sbn
tftp-server flash:/phones/7941_7961/cnu41.9-1-1TH1-16.sbn alias cnu41.9-1-1TH1-16.sbn
tftp-server flash:/phones/7941_7961/cvm41sccp.9-1-1TH1-16.sbn alias cvm41sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7941_7961/dsp41.9-1-1TH1-16.sbn alias dsp41.9-1-1TH1-16.sbn
tftp-server flash:/phones/7941_7961/jar41sccp.9-1-1TH1-16.sbn alias jar41sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7941_7961/SCCP41.9-1-1SR1S.loads alias SCCP41.9-1-1SR1S.loads
tftp-server flash:/phones/7941_7961/term41.default.loads alias term41.default.loads
tftp-server flash:/phones/7941_7961/term61.default.loads alias term61.default.loads
tftp-server flash:/phones/7942_7962/apps42.9-1-1TH1-16.sbn alias apps42.9-1-1TH1-16.sbn
tftp-server flash:/phones/7942_7962/cnu42.9-1-1TH1-16.sbn alias cnu42.9-1-1TH1-16.sbn
tftp-server flash:/phones/7942_7962/cvm42sccp.9-1-1TH1-16.sbn alias cvm42sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7942_7962/dsp42.9-1-1TH1-16.sbn alias dsp42.9-1-1TH1-16.sbn
tftp-server flash:/phones/7942_7962/jar42sccp.9-1-1TH1-16.sbn alias jar42sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7942_7962/SCCP42.9-1-1SR1S.loads alias SCCP42.9-1-1SR1S.loads
tftp-server flash:/phones/7942_7962/term42.default.loads alias term42.default.loads
tftp-server flash:/phones/7942_7962/term62.default.loads alias term62.default.loads
tftp-server flash:/phones/7945_7965/apps45.9-1-1TH1-16.sbn alias apps45.9-1-1TH1-16.sbn
tftp-server flash:/phones/7945_7965/cnu45.9-1-1TH1-16.sbn alias cnu45.9-1-1TH1-16.sbn
tftp-server flash:/phones/7945_7965/cvm45sccp.9-1-1TH1-16.sbn alias cvm45sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7945_7965/dsp45.9-1-1TH1-16.sbn alias dsp45.9-1-1TH1-16.sbn
tftp-server flash:/phones/7945_7965/jar45sccp.9-1-1TH1-16.sbn alias jar45sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7945_7965/SCCP45.9-1-1SR1S.loads alias SCCP45.9-1-1SR1S.loads
tftp-server flash:/phones/7945_7965/term45.default.loads alias term45.default.loads
tftp-server flash:/phones/7945_7965/term65.default.loads alias term65.default.loads
tftp-server flash:/ringtones/Analog1.raw alias Analog1.raw
tftp-server flash:/ringtones/Analog2.raw alias Analog2.raw
tftp-server flash:/ringtones/AreYouThere.raw alias AreYouThere.raw
tftp-server flash:/ringtones/DistinctiveRingList.xml alias DistinctiveRingList.xml
tftp-server flash:/ringtones/RingList.xml alias RingList.xml
tftp-server flash:/ringtones/AreYouThereF.raw alias AreYouThereF.raw
tftp-server flash:/ringtones/Bass.raw alias Bass.raw
tftp-server flash:/ringtones/CallBack.raw alias CallBack.raw
tftp-server flash:/ringtones/Chime.raw alias Chime.raw
tftp-server flash:/ringtones/Classic1.raw alias Classic1.raw
tftp-server flash:/ringtones/Classic2.raw alias Classic2.raw
tftp-server flash:/ringtones/ClockShop.raw alias ClockShop.raw
tftp-server flash:/ringtones/Drums1.raw alias Drums1.raw
tftp-server flash:/ringtones/Drums2.raw alias Drums2.raw
tftp-server flash:/ringtones/FilmScore.raw alias FilmScore.raw
tftp-server flash:/ringtones/HarpSynth.raw alias HarpSynth.raw
tftp-server flash:/ringtones/Jamaica.raw alias Jamaica.raw
tftp-server flash:/ringtones/KotoEffect.raw alias KotoEffect.raw
tftp-server flash:/ringtones/MusicBox.raw alias MusicBox.raw
tftp-server flash:/ringtones/Piano1.raw alias Piano1.raw
tftp-server flash:/ringtones/Piano2.raw alias Piano2.raw
tftp-server flash:/ringtones/Pop.raw alias Pop.raw
tftp-server flash:/ringtones/Pulse1.raw alias Pulse1.raw
tftp-server flash:/ringtones/Ring1.raw alias Ring1.raw
tftp-server flash:/ringtones/Ring2.raw alias Ring2.raw
tftp-server flash:/ringtones/Ring3.raw alias Ring3.raw
tftp-server flash:/ringtones/Ring4.raw alias Ring4.raw
tftp-server flash:/ringtones/Ring5.raw alias Ring5.raw
tftp-server flash:/ringtones/Ring6.raw alias Ring6.raw
tftp-server flash:/ringtones/Ring7.raw alias Ring7.raw
tftp-server flash:/ringtones/Sax1.raw alias Sax1.raw
tftp-server flash:/ringtones/Sax2.raw alias Sax2.raw
tftp-server flash:/ringtones/Vibe.raw alias Vibe.raw
tftp-server flash:/Desktops/CampusNight.png
tftp-server flash:/Desktops/TN-CampusNight.png
tftp-server flash:/Desktops/CiscoFountain.png
tftp-server flash:/Desktops/TN-CiscoFountain.png
tftp-server flash:/Desktops/CiscoLogo.png
tftp-server flash:/Desktops/TN-CiscoLogo.png
tftp-server flash:/Desktops/Fountain.png
tftp-server flash:/Desktops/TN-Fountain.png
tftp-server flash:/Desktops/MorroRock.png
tftp-server flash:/Desktops/TN-MorroRock.png
tftp-server flash:/Desktops/NantucketFlowers.png
tftp-server flash:/Desktops/TN-NantucketFlowers.png
tftp-server flash:Desktops/320x212x16/List.xml
tftp-server flash:Desktops/320x212x12/List.xml
tftp-server flash:Desktops/320x216x16/List.xml
tftp-server flash:/bacdprompts/en_bacd_allagentsbusy.au alias en_bacd_allagentsbusy.au
tftp-server flash:/bacdprompts/en_bacd_disconnect.au alias en_bacd_disconnect.au
tftp-server flash:/bacdprompts/en_bacd_enter_dest.au alias en_bacd_enter_dest.au
tftp-server flash:/bacdprompts/en_bacd_invalidoption.au alias en_bacd_invalidoption.au
tftp-server flash:/bacdprompts/en_bacd_music_on_hold.au alias en_bacd_music_on_hold.au
tftp-server flash:/bacdprompts/en_bacd_options_menu.au alias en_bacd_options_menu.au
tftp-server flash:/bacdprompts/en_bacd_welcome.au alias en_bacd_welcome.au
tftp-server flash:/bacdprompts/en_bacd_xferto_operator.au alias en_bacd_xferto_operator.au
radius-server attribute 31 send nas-port-detail
control-plane
bridge 1 route ip
bridge 100 route ip
voice-port 0/0/0
shutdown
caller-id enable
voice-port 0/0/1
shutdown
caller-id enable
voice-port 0/0/2
shutdown
caller-id enable
voice-port 0/0/3
shutdown
caller-id enable
voice-port 0/1/0
trunk-group ALL_FXO 64
connection plar 201
shutdown
caller-id enable
voice-port 0/1/1
trunk-group ALL_FXO 64
connection plar opx 511
description Configured by CCA 4 FXO-0/1/1-Custom-BG
caller-id enable
voice-port 0/1/2
trunk-group ALL_FXO 64
connection plar opx 511
description Configured by CCA 4 FXO-0/1/2-Custom-BG
caller-id enable
voice-port 0/1/3
trunk-group ALL_FXO 64
connection plar 204
shutdown
caller-id enable
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control -15
description Music On Hold Port
sccp local Loopback0
sccp ccm 192.168.2.99 identifier 1 version 3.1
sccp
sccp ccm group 1
associate ccm 1 priority 1
dial-peer cor custom
name internal
name local
name local-plus
name international
name national
name national-plus
name emergency
name toll-free
dial-peer cor list call-internal
member internal
dial-peer cor list call-local
member local
dial-peer cor list call-local-plus
member local-plus
dial-peer cor list call-national
member national
dial-peer cor list call-national-plus
member national-plus
dial-peer cor list call-international
member international
dial-peer cor list call-emergency
member emergency
dial-peer cor list call-toll-free
member toll-free
dial-peer cor list user-internal
member internal
member emergency
dial-peer cor list user-local
member internal
member local
member emergency
member toll-free
dial-peer cor list user-local-plus
member internal
member local
member local-plus
member emergency
member toll-free
dial-peer cor list user-national
member internal
member local
member local-plus
member national
member emergency
member toll-free
dial-peer cor list user-national-plus
member internal
member local
member local-plus
member national
member national-plus
member emergency
member toll-free
dial-peer cor list user-international
member internal
member local
member local-plus
member international
member national
member national-plus
member emergency
member toll-free
dial-peer voice 1 pots
port 0/0/0
no sip-register
dial-peer voice 2 pots
port 0/0/1
no sip-register
dial-peer voice 3 pots
port 0/0/2
no sip-register
dial-peer voice 4 pots
port 0/0/3
no sip-register
dial-peer voice 5 pots
description ** MOH Port **
destination-pattern ABC
port 0/4/0
no sip-register
dial-peer voice 6 pots
description 鬰atch all dial peer for BRI/PRI�
translation-profile incoming nondialable
incoming called-number .%
direct-inward-dial
dial-peer voice 50 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
port 0/1/0
dial-peer voice 51 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
port 0/1/1
dial-peer voice 52 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
port 0/1/2
dial-peer voice 53 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
port 0/1/3
dial-peer voice 54 pots
description ** FXO pots dial-peer **
destination-pattern A0
port 0/1/0
no sip-register
dial-peer voice 55 pots
description ** FXO pots dial-peer **
destination-pattern A1
port 0/1/1
no sip-register
dial-peer voice 56 pots
description ** FXO pots dial-peer **
destination-pattern A2
port 0/1/2
no sip-register
dial-peer voice 57 pots
description ** FXO pots dial-peer **
destination-pattern A3
port 0/1/3
no sip-register
dial-peer voice 2000 voip
description ** cue voicemail pilot number **
translation-profile outgoing XFER_TO_VM_PROFILE
destination-pattern 396
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 2001 voip
description ** cue auto attendant number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 398
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 2012 voip
description ** cue prompt manager number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 240
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 58 pots
trunkgroup ALL_FXO
corlist outgoing call-emergency
description **CCA*North American-7-Digit*Emergency**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 9911
forward-digits all
no sip-register
dial-peer voice 59 pots
trunkgroup ALL_FXO
corlist outgoing call-emergency
description **CCA*North American-7-Digit*Emergency**
preference 5
destination-pattern 911
forward-digits all
no sip-register
dial-peer voice 60 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*North American-7-Digit*10-Digit Local**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 9[2-9].........
forward-digits all
no sip-register
dial-peer voice 61 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*North American-7-Digit*Service Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 9[2-9]11
forward-digits all
no sip-register
dial-peer voice 62 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*North American-7-Digit*Long Distance**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 91[2-9]..[2-9]......
forward-digits all
no sip-register
dial-peer voice 63 pots
trunkgroup ALL_FXO
corlist outgoing call-international
description **CCA*North American-7-Digit*International**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 9011T
forward-digits all
no sip-register
dial-peer voice 64 pots
trunkgroup ALL_FXO
corlist outgoing call-toll-free
description **CCA*North American-7-Digit*Toll-Free**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 91800.......
forward-digits all
no sip-register
dial-peer voice 65 pots
trunkgroup ALL_FXO
corlist outgoing call-toll-free
description **CCA*North American-7-Digit*Toll-Free**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 91888.......
forward-digits all
no sip-register
dial-peer voice 66 pots
trunkgroup ALL_FXO
corlist outgoing call-toll-free
description **CCA*North American-7-Digit*Toll-Free**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 91877.......
forward-digits all
no sip-register
dial-peer voice 67 pots
trunkgroup ALL_FXO
corlist outgoing call-toll-free
description **CCA*North American-7-Digit*Toll-Free**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 91866.......
forward-digits all
no sip-register
dial-peer voice 68 pots
trunkgroup ALL_FXO
corlist outgoing call-toll-free
description **CCA*North American-7-Digit*Toll-Free**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 91855.......
forward-digits all
no sip-register
no dial-peer outbound status-check pots
telephony-service
video
authentication credential admin admin
fxo hook-flash
max-ephones 22
max-dn 88
ip source-address 192.168.2.99 port 2000
max-redirect 20
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service phone SPA525-wifi-on yes
service phone SPA525-protocol SPCP
service phone SPA525-auto-detect-sccp yes
service phone SPA525-http-write yes
service phone SPA525-SSID cisco-voice
service phone SPA525-readonly no
service phone SPA525-Encryption-type DISABLE
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
system message ZFI Engi & Const
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.2/CCMCIP/authenticate.asp
cnf-file location flash:
cnf-file perphone
load 7916-12 B016-1-0-4
load 7916-24 B016-1-0-4
load 7937 apps37sccp.1-4-4-0
load 7960-7940 P00308010200
load 7941 SCCP41.9-1-1SR1S
load 7941GE SCCP41.9-1-1SR1S
load 7942 SCCP42.9-1-1SR1S
load 7945 SCCP45.9-1-1SR1S
load 7961 SCCP41.9-1-1SR1S
load 7961GE SCCP41.9-1-1SR1S
load 7962 SCCP42.9-1-1SR1S
load 7965 SCCP45.9-1-1SR1S
load 521G-524G cp524g-8-1-17
time-zone 12
keepalive 30 auxiliary 4
voicemail 396
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
hunt-group logout HLog
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 $1$AJGT$FDYMK5h1/Tiz2VQKQe2fS.
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern 9.T
transfer-pattern .T
transfer-pattern 6... blind
secondary-dialtone 9
night-service day Sun 00:00 23:59
night-service day Mon 17:00 08:00
night-service day Tue 17:00 08:00
night-service day Wed 17:00 08:00
night-service day Thu 17:00 08:00
night-service day Fri 17:00 08:00
night-service day Sat 00:00 23:59
night-service date Jan 1 00:00 23:59
night-service date Nov 25 00:00 23:59
night-service date Dec 25 00:00 23:59
fac standard
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-template 15
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-template 16
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
ephone-template 17
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
ephone-template 18
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-dn 9
number BCD no-reg primary
description MoH
moh out-call ABC
ephone-dn 81 octo-line
number 301 no-reg primary
pickup-group 1
name wpb wpb
call-forward busy 396
call-forward noan 396 timeout 20
ephone-dn 82 octo-line
number 227 no-reg primary
pickup-group 1
name Robert Stewart
call-forward busy 396
call-forward noan 396 timeout 20
ephone-dn 83 octo-line
number 239 no-reg primary
pickup-group 1
name Conf Room
call-forward busy 396
call-forward noan 396 timeout 20
ephone-dn 84 octo-line
number 223 no-reg primary
pickup-group 1
label 223
description George Guo
name Caroline Wang
call-forward busy 396
call-forward noan 396 timeout 20
ephone-dn 85 octo-line
ring external
number 201 no-reg primary
pickup-group 1
label 201
description Caroline Wang
name Cari Adamonis
call-forward busy 396
call-forward noan 396 timeout 20
ephone-dn 86
number 6... no-reg primary
description ***CCA XFER TO VM EXTENSION***
call-forward all 396
ephone-dn 87
number A801... no-reg primary
mwi off
ephone-dn 88
number A800... no-reg primary
mwi on
ephone 1
device-security-mode none
mac-address 0015.6276.7240
ephone-template 16
username "mdeng" password 123456
type 7940
button 1:82
ephone 2
device-security-mode none
mac-address 0015.6278.9118
ephone-template 16
username "jespinal" password 123456
type 7940
button 1:83
ephone 3
device-security-mode none
mac-address 0015.6269.5B0C
ephone-template 16
username "wpb" password 123456
mtp
type 7940
button 1:81
ephone 5
device-security-mode none
mac-address 0012.4362.0B1E
ephone-template 16
username "GGuo" password 123456
type 7940
button 1:84
ephone 6
device-security-mode none
mac-address 0015.6286.AE4F
ephone-template 16
username "cwang" password 123456
type 7940
missed-calls all
button 1:85
alias exec cca_voice_mode PBX
alias exec cca_vm_notification schedule from_time=00 to_time=24
banner login ^Cbanner login ^Cisco Configuration Assistant. Version: 3.2 (3). Sat Aug 24 11:52:57 EDT 2013^^C
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
transport preferred none
transport input all
line vty 5 100
transport preferred none
transport input all
ntp master
endhow to change local ip address?Via an operating system command.
It's not the sort of thing an application should be doing at all. IP addresses these days are assigned via DHCP. Why would you want to change it from within an application? It would probably disconnect all sockets for all running applications, invalidate the login, all kinds of bad effects.
What is the actual requirement? -
How can I change the email address associated with my iCloud account?
How can I change the email address associated with my iCloud account? Somehow, accidentally have my wife's email address on my iCloud account and on hers as well.
iCloud FAQ
http://support.apple.com/kb/HT4436 -
I cannot connect to the internet after switching providers. I've changed the email address associated with the new account but am sure there is something else I need to change. I have also changed the apple information as well including user name and password. Can anyone help me? (This is an ipad question).
Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
iOS: Changing the signed-in iTunes Store Apple ID Account
http://support.apple.com/kb/ht1311
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Change the IP address on which AS1g is installed
How can I change the ip address of the system on which AS10 and infrastructure is installed. I wantted to add another ip to it.
Yes, Settings>wifi
click the small i in circle, then set as desired.
Please only do this if advised or you understand the implications associated with using static IP addresses. -
Can you change the ip address on an iPad
Just wondering if it's possible to change the IP address on the iPad?
Yes, Settings>wifi
click the small i in circle, then set as desired.
Please only do this if advised or you understand the implications associated with using static IP addresses. -
Both the email address and the password were changed. Email address and alternate email address were verified. Signed in with the new email address on phone, Itunes, and App Store. Still, facetime does not work. When she tries to sign in, she gets a message "check your network". I have signed the phone out of the WiFi and signed back in. Network does not seem to have an issue.
Erasing and resetting the network settings in the phone seems to have done the trick. Facetime is now working again.
Settings> General> Reset> Reset Network Settings.
I did not have to remove all data from the phone. -
How do I change the email address associated with my AppleID?
How do I change the email address associated with my AppleID? I have tried numerous times to do it, but the email address is always grayed-out and unchangeable. Somehow, my wife's email address is associated with my AppleID and her distinct AppleID? Trying to use FaceTime doesn't work for me since it thinks I am sending from her email address to the same address she has at her end. Frustrated!
http://support.apple.com/kb/HE40
http://support.apple.com/kb/he37 -
How to change the hardware address (MAC) of my printer to match my mac
how to change the hardware address (MAC) of my printer to match my mac
Hello @giomarcondes ,
Welcome to the HP Support Forums!
I understand that you wish to alter the MAC address on your HP Deskjet Ink Advantage 3525 e-All-in-One Printer to match the MAC address of your Mac OS X computer. Unfortunately, what you're requesting is not supported. Just to clarify, "a media access control address (MAC address) is a unique identifier assigned to network interfaces for communications on the physical network segment". They are programmed into the device and are not designed to be changed. (Source: MAC address)
Are you experiencing issues configuring your HP Deskjet on your wireless network to communicate with your Mac computer?
If you do actually require support configuring the wifi connection on your printer I would be more than happy to assist you with this. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping! -
How Can I change my email address or create a new account??
I need to change my email address of the account or create a new account but when I try to create new one is
asking me for the password supposing like I have already one...At this time, you cannot change the email address for an account. When you sign up for a new account it will ask you to provide a password on the very first page and then confirm it before you continue.
OTN -
I have had to change my email address/Apple ID. My iPad recognises the new detail in iTunes and iCloud but when I go into iCloud through my MacBook Air, it requests a password for the old email account which I can no longer use. There is no Option to be able to change this email/ID detail as I cannot get further than the password request. Can anyone help please - this is driving me insane?!
Go to System Preferences and click Sign Out, select Delete at all the prompts, then sign back in with the changed ID? (Your iCloud data will disappear from your Mac when you sign out and choose Delete, but will still be in iCloud. Provided you are signing back into the same account your data will reappear on your Mac when you sign back in.)
-
How to change my Email address and my home address ?
Hi,
I Create a new account @live.com , I want all my last certifications to be use the new Email address instead of the old one
and also how to change my home address
Last Questions , I want to change my login account on this forums to use the new one so i keep with all my questions and my points in the new login
Thanks.Hi.
You can change your home address at the Microsoft Profile Center. You will need to log in with one of your Live ID accounts and change here it here:
https://profile.microsoft.com/regsysprofilecenter/infodefault.aspx
As Sathya suggested, you can contact the Microsoft Certified Professional Support staff to move your certifications from the old email address to the new one, here:
MCP support contact information
Telephone: (800) 636-7544
Monday through Friday: 6:30 A.M.–5:30 P.M. Pacific Time
Email: [email protected]
Expect a response within two business days.
Fax: (661) 793-6555
Alternately, you can contact your Microsoft Regional Service Center for Microsoft Learning. Please use the following web page to find the contact information for help.
http://www.microsoft.com/learning/en-us/help.aspx
The page includes email and phone contact information for your geographic location so you can email or call them directly. They will help you get your MCP ID transferred to your new Live ID email account.
NOTE: This public forum is usually monitored by fellow certified IT folks and trainers.
Good luck!
Best wishes, Davin Mickelson
Maybe you are looking for
-
How do I fix bad Quality audio recording in Captivate 4
I am having trouble recording decent quality audio in Captivate 4. What is happening is after I do the screen and audio recording when I play it back the audio is choppy. It also kind of sounds like the audio is quickly echoed and then clipped. Final
-
sames as the question....tell me how to remove....thanks
-
Russian Characters are not displaying in CSV file.
Hi, I have got an issue with Russian data. while opening the .xls file the russian data is dispalying, but when I save it as .csv file the russian data is converted into some junk characters. Can anybody please respond me how I can get the russian da
-
How do I count the number of times a particular year occurs in a range of dates?
One column in my spreadsheet is a date and time. I want to be able to count how many times a particular year occurs. Is there a way to combine the COUNTIFS and YEAR functions, or is there something easier to use? I'm using Numbers '09. Thank you for
-
Multiple movies in one imovie file?
i've imported video from vhs into imovie, over 4 hours of footage. i made a movie file of an hour length, and am exporting it to idvd. can i go back into my imovie file and make another movie, with the next group of clips? perhaps as a save as?? with