Change wireless password b209

i have a photosmart plus b209a-m and recently changed my WEP key. now my printer won't connect b/c it's on the old key, and i can't figure out how to update it. i've checked the forums and can't find a thread for changing the wireless password for my specific type of printer. please help!

You may be able to set this up by going to your start menu, programs, hp, b209a, and then printer setup and software. From here you can go to add device, and see if it gives the option to set the device up via wireless.
If this does not work you may have to reinstall the software and go through wireless setup during the install. The link below shows how to do this on all of the different operating systems:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02282624&tmp_task=setupCategory&cc=uk&dlc=en&lc...
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

Similar Messages

I NEED TO CHANGE THE PASSWORD OF MY TIME CAPSULE BACK UP AND THE WIFI

Hello,
I have a 1 T time capsule which i use to back up and for wifi.. i am fearing of it being abused for cecking out my data. How can change it and prevent this from happening in the future..
Thanks
miks

You can encrypt your backup but this is a very long process.
You may do better to simply wipe the backup and start again.
See Pondini.
http://pondini.org/TM/31.html
Changing wireless password is very easy.. open the airport utility.. click on TC then edit.. and then wireless tab.. and type in a new password.. update.

We changed the password on our wireless and now I have interrupted connection through the relay airporter?

Help. We changed the password on our airport express and I have no problem connecting to the internet, but I am having a problem connecting through our relay airport express. My internet connection is slow and my music will only play for a couple of seconds and then it cuts out? Any suggestions?

Are both of your AirPort Express Base Stations (AX) the 802.11g or 802.11n model? Do you have the second AX configured to "join" the first's wireless network or to extend it?

How do I change my wireless password on Apple Airport extreme

How do I change the wireless password on my Apple Airport extreme?

On your Mac......
Click the Finder icon (that smiley face on the left side of the dock)
Open Applications
Open Utilities
Open AirPort Utility
Click on the picture of the AirPort Extreme, then click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Edit / backspace out the current Wireless Password entry
Do the same to Verify the new password
It might be a good idea to write down the new password and store the info in a safe place
Click Update in the upper right corner of the window and allow a full minute for the AirPort Extreme to restart

TS1398 I changed my password on my wireless home router. Now I can not connect to internet on iPAD. I know I have to change the password on the iPad but I do not know how to do that. I can know longer connect to my wireless.

I am new at using an Ipad. My Ipad was connected to my home wireless. I changed the password on my home router and now I do not know how to change that password on my I Pad. Can someone help me?

Tap settings on your iPad
then tap Wi-Fi
click on the blue arrow which is next to the network
a new section will be opened
it will display the router settings and all ( you dont have to deal with it)
then tap forget network at the top
go back and tap your network
iPad will ask the password of the network just enter the new password and you are good to go
if a message appears unable to connect just go back turn Wi-Fi off then start it again
and try connecting to it again
i hope this will help you if not reply me and ask me for more questions.......do reply if it worked

HT201974 I just installed a wireless cable modem for a desktop PC and my MacBook Pro; After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password.

I just installed a wireless cable modem for a desktop PC and my MacBook Pro; After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password. Can anyone help?

Hi twinkytomes,
Welcome to the Support Communities!
The article below may be able to help you with this.
AirPort Utility 6.x: Password-protect your wireless network
http://support.apple.com/kb/PH5119
Cheers,
- Judy

I have a jetpack, and when I try to "connect" to my ipad or phone, it keeps telling me I am not using the correct password. I have tried everything. I even changed the password, nothing is working. Both are 4G, my ipad is an Air and my phone is a Iphon

I have a jetpack, and when I try to "connect" to my ipad or phone, it keeps telling me I am not using the correct password. I have tried everything. I even changed the password, nothing is working. Both are 4G, my ipad is an Air and my phone is a Iphone 5. I can get connected to other wifi on these features but not with my jetpack. Please help, I need to use this feature soon. Thank you so much

Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect.

Changing network password...There are currently no logon servers available to service the logon request in Windows 8 and 8.1 Enterprise

We currently are running Windows 7 in our enterprise environment. Everything works as expected when the user tries to
change their network password via crtl+alt+del, change a password. We are now testing and trying to deploy Windows 8.1 to a test group and are running into an issue when any AD user tries to change their network password. The user can logon to the
PC just fine when the PC is on the domain, however as soon as they go to change their password they are getting the error "There are currently no logon servers available to service the logon request". The end result is that the user can not change
their password. We tried this via connected to the dock with a network cable, on corporate wireless, with a Windows 8.1 machine completely patched over with all Microsoft patches, and a Windows 8.1 machine that is not patched and are running into the same
issue. Has anyone ran into this? Is there something that has to be changed on the infrastructure side?

Hi,
Please check the following KB:
Error message when you try to log on to a Windows Server 2008-based RODC: "There are currently no logon servers available to service the logon request"
http://support.microsoft.com/kb/949048
To configure the Password Replication Policy for an RODC, a member of the Domain Admins group is required.
By default, RODC's do not cache any user or computer passwords, neither a user or computer will be able to authenticate. You can however specifiy that their passwords be cached either by including a group or specific user in the Password Replication Policy
on the RODC at the remote site.
RODC - Password Replication Policy and Password Cache Management
http://blogs.dirteam.com/blogs/paulbergson/archive/2010/09/22/rodc-password-replication-group-management.aspx
Password Replication Policy Administration
http://technet.microsoft.com/en-us/library/cc753470(v=ws.10).aspx
For further information about the Windows Server side, I suggest you ask Windows Server forum:
https://social.technet.microsoft.com/Forums/en-US/home?category=windowsserver
Karen Hu
TechNet Community Support

802.1X cannot change expired password at login

Hi all,
I'm trying to roll out 802.1X authentication for wifi access at my company, however there's one major problem I can't for the life of me figure out. I'm not able to get the Macs to prompt for a password change when the password has expired at login.
On Windows when you log in it will prompt you to change your password when it's expired. However on OSX when you're on the workstation login screen, you can see the wireless icon briefly connect, then it will think for a bit and the user cannot log in at all.
OSX can definitely can change expired passwords via 802.1X, as if I log into a local account and connect to the wifi with the user whose password has expired, it will prompt to change it, and changes it successfully.
I'm using NPS for RADIUS authentication against AD, and using Profile Manager in OSX Server to create the 802.1X profile.
Does anyone have any experience with OSX and using WPA Enterprise/802.1X Profiles?
Thanks!

Hi,
Can you post a screenshot for this situation?
Sometimes, the third party credential provider would lead to some issue like this, I suggest you check the
current credential provider via the following path:
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI\SessionData\x\LastLoggedOnProvider
You should compare the result with the values in the following path:
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\credential providers
If the current value is third party credential provider, try to disable it:
To disable the provider add a REG_DWORD value "Disabled"=1 to that provider’s CLSID subkey.
The provider will be disabled on the next session creation (sessions are created when you log off, switch users, or reboot.
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

HT4628 resetting wireless password

I need to reset the password for wireless connection to our airport for company and I can't seem to fine how to.

hey found some info hope it helps give that a try
There are two types of reset you can perform on your Apple Extreme Base Station.
If you forgot your base station password and can no longer configure the Airport Extreme you should perform a Soft Reset.
If your AirPort stopped responding or has serious accessibility issues you can revert back to default factory configuration by performing a Hard Reset.
SOFT RESET
The AirPort Extreme must be connected to power during the following steps.
Step One
Disconnect any Ethernet cables from the base station.
Step Two
Select System Preferences... from the Apple menu at the top left hand corner of the screen.
Step Three
Click the Network icon to open the Network Preferences.
Step Four
Select Airport from the list of connections on the left.
Step Five
Click the Advanced button.
Step Six
Click to select the TCP/IP tab.
Step Seven
Set the Configure IPv4 to Using DHCP.
Step Eight
Press and hold the base station reset button for one full second. The base station remains in reset mode for five minutes. If you do not make your changes within five minutes of pressing the reset button, the base station will revert to the previous configuration.
Note: Holding the reset button for 5 seconds or longer will do a hard reset. AirPort will indicate if it's in hard reset mode by blinking faster.
Step Nine
From the AirPort menu bar item, choose the network created by the base station (the network name does not change).
Step Ten
Open the Airport Utility from the Applications : Utilities folder.
Step Eleven
Locate and double-click your base station to configure it.
Step Twelve
Ignore the errors in Base Station Status at this time. You now have the opportunity to change settings such as base station password, network password, the Access Control List, and RADIUS.
- To reset base station password, choose Base Station tab and edit the password field.
- To change the network password, choose the Wireless tab and edit the Wireless password field. Or, turn on encryption (WPA2 is recommended) and enter a new password for your AirPort network.
- Unless you have been given an IP address by your ISP or system administrator, do not change the IP address.
Step Thirteen
Click Update. The base station restarts to load the new settings. Plug back in the Ethernet cable and reconnect to your network.
HARD RESET
If your AirPort Extreme has firmware 5.5.1 or later follow these steps:
Step One
Push and hold the reset button.
Step Two
Continue holding it until you see the center status light (LED) start to flash rapidly, which should happen after about five seconds.
Step Three
Release the button, and AirPort Extreme will reset.

Changing WiFi Passwords in Windows 8

Here we go...
I was able to set up wifi access at work, but when I get home, I can't connect to the router. My laptop gets the signal, but I don't know how to change the password so that I can actually get on the net. I'm sure this is a simple issue, but I just can't figure it out. Any help appreciated as usual!

1. Open Network Connections (ncpa.cpl).
2. Right-click the WiFi connection and click Status.
3. Click the Wireless Properties button and look on the Security tab.
4, When you click the check box for Show characters, the password is available.
This actually comes from a Windows 10 (tech preview) machine. I assume it's the same.
-Jerry

I recently changed the password for my home network and now my MP495 printer will not connect.

Hi, First time caller, long time listener............
I am running Win 7 on all of the pcs in the house with an Android or two as well. I had to change the pw for my linksys router this past weekend and I noticed today that I can not get on as the "printer is offline". I have done the obvious cycling of pcs , router and printer. I have also tried checking / unchecking the use printer offline. Do I need to redownload the drivers and attach the printer by usb and reinstall it? Its been a while since I installed it and I can't remember if it needed a password to connect or not.
Thank you, I appreciate your time.

Hi Trilo,
Since you changed the password to your wireless router, you will need to reinstall the drivers on your computer to reconnect the printer to your network. Prior to reinstalling, you will want to ensure that the wireless LAN setting on the printer is enabled. To do this, press the Maintenance button on the printer (looks like a pair of pliers and a screwdriver) repeatedly until the symbol that looks like "G" appears in the LCD, then press the <COLOR> button to enable wireless LAN.
Once the wireless LAN has been enabled, please click here to go to the DRIVERS AND SOFTWARE page for the PIXMA MP495. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "RECOMMENDED FOR YOU" section and click the MP drivers file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once the file has been downloaded, please double-click on it to reinstall the printer wirelessly.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT5022 How do I change my "password" for using an Airport Extreme 802.11n Wi-Fi base station?

My Kindle Fire asked for a password for my Airport Extreme 802.11 Wi-Fi. The password used on other devices using the Airport Extreme does not seem to work and Apple Support is not willing to help unless a service charge is made. How do I change my password or find out what the password is?

I am assuming that you are referring to the AirPort's wireless security password and not its base station Administrator's password ... correct?
If so, there are number of methods of resetting a password if you don't remember what it is. Please check out the following AirPort User Tip for additional details.

I just formatted my hard drive and I need to find out what my "wireless password is"

I just formatted my hard drive and I need to find out what my "wireless password is". I was in a hurry when I did format my PC that when I got to given my wireless a password, I used the same one as before. Now I have tried to finding what it is for my other products, I don't know where to look. Do I or can I change the password without losing anything? Need help PLEASE
[Personal Information Removed]

Hi:
You need to read your router's configuration instructions on how to access the router's menu.
Hopefully you can access that and in the wireless security menu you will find the passkey to use.
Paul

How do i change the password on my airport?

i want to change the password on my network connection. how do i do that?

bigstimpycat wrote:
i've tried that but it says "airport utility was unable to find any airport wireless devices!"
So I'm not clear, are you using an ABS?

Change wireless password b209

Similar Messages

Maybe you are looking for