ChangeAudit Job LMS4.2
I scheduled a 24-HR ChangeAudit job and I clicked the link I recieved in the email and I get the following error
"You cannot view the report since the corresponding archive is already deleted or not available"
I thought that the bug CSCsy03151 has already been fixed in RME3.2. Any idea?
Seems the similar issue is resurfaced with LMS 4.2 as well. Now this is # CSCub07385 and being tracked now. Not sure but discussions are to address this in LMS 4.2.2.
-Thanks
Vinod
Similar Messages
-
Hello Network Management gurus.
I'm baffled by a lot of new features of LMS4.2 and seem lost where to start looking.
Our client needs to periodically make changes to switches to change their port settings.
They have specific descriptions with a certain string. Let's say the description say "Cisco phone".
The task is to create either template or ad-hoc Netconfig job that will send changes only to those switchports.
How can it be done?
Thanks for your help in advance
EugeneThanks, Michel.
I'm almost done except for the task/commands definitions.
This is what I'm doing.
1) Admin -> System -> Group Management -> Port and Module (once I clicked "Port and Module" I'm redirected to Inventory -> Group Management -> Port and Module)
2) I create a group named "VoIP switchport"
3) Then I select the device that I need to configure. It is my switch SW2
4) Then goes Rule Expression:
Port.PortDescription equals "VoIP_Port"INCLUDELIST {:RME:INVENTORY:Port$-1172380997>,
:RME:INVENTORY:Port$-1172380996>,
:RME:INVENTORY:Port$-1172380995>,
:RME:INVENTORY:Port$-1172380994>,
:RME:INVENTORY:Port$-1172380993>}
In human language it say that that the switchport description should be matching the string "VoIP_Port" and it is applicable to 5 ports, they are Fa0/1 through Fa0/5 interfaces of the switch
The fun starts when I try to create a job to push some VoIP parameters to the switchports in question.
I create a new NetConfig job, select "Port based" type job, then I select the device which is a redundant step for me. I expect the job selector is smart enough to select the device based on my "Port and Module" group created previously.
Anyways, when I click "Next" I select my Port group which is "VoIP switchport" and then the next screen suggests to select the task. I assume I should select "Adhoc task". When I add an instance of this task I'm presented with a screen prompting to configure CLI commands. This is where I stopped.
What am I starting with? Should I go to the global config mode first ? If I want to send the command "switchport voice vlan 15" should I just add it in the CLI field? How am I applying it only to the required 5 ports?
If I start the job anyway it fails and the error message is no applicable devices. -
LMS4.1: Logrotation Job
Hello,
Did setup the Logrotation Schedule, applied and got a response that it scheduled. If I call this again, everithing is shown as default. And I cant find Logrotation Job in the global Job-Browser.
are there any hints how to can find this Logrotation Job?
SteffenYes you are right, you can find it beside the DB-backup-Job in:
crontab -l casuer (Solaris)
I hope this forum thread is read by someone of the product management as well:
Its very confusing to have a unified LMS job management, where you should rely on to can find 100,00% everything of 100,00% of any jobs in LMS and have 2 execptions left.
Thx Martin, you are the best:) -
Dynamic config jobs in LMS4.x
Hello,
I am looking for a way to deploy dynamic generated config based on a group of devices - the config is simple - like the example below:
int fa0/0.200
encapsulation dot1Q 200
ip address 10.200.x.y 255.255.255.248
router bgp AS
network 10.200.x.y mask 255.255.255.248
ip prefix-list Name permit 10.200.x.z/29
The variables are:
1.the interface - could be fa0/0 or fa0/1 or vlan200 - I have them on a list.
2."x",y,z from ip address is different - is based on an internal location code. All the ip address are generated for every device based on a list.
3. AS is different from each location - i have them in a list
I need to deploy this config on more than 250 devices. Is there any way I can make LMS read some input file to generate config or load some script/excel and then deploy the exact generated config to the right device?.... generate 250 exact deploy-config jobs?... or something similar....
Thank you very much for any ideas
Best regards,
Bogdan LasloIf that code is all planted "on" an object, that might the source of the problem. Try following the AS3 protocol of keeping the code on the timeline. Instead of using "on" on the object, try using...
btnName.onRelease = function(){
etc...
on the timeline like you would in AS3. -
LMS4.0.1 - failure with PSIRT-EoX System Job
Hello,
So we cant create EoX and PSIRT reports
For Job-Log please see attached 1007.1.log.
Patch lms40x-win-CSCto46927-0 has been installed already.
CCO-Credentials + Proxy-settings in LMS must be oK, because we are able to auto download device packages for instance.
SteffenHi,
Thanks for confirming. OS should not be issue here.
I foudn the following exception on the job log :-
[ Wed Jul 13 13:45:12 CEST 2011 ],ERROR,[main],com.cisco.nm.rmeng.inventory.reports.util.EOXSoftwareXMLParser,postToCCO,735,Exception occured. Either no such URL found on cisco.com or connection failed to cisco.comno protocol: java.net.MalformedURLException: no protocol:
at java.net.URL.(URL.java:567)
at java.net.URL.(URL.java:464)
at java.net.URL.(URL.java:413)
at com.cisco.nm.rmeng.inventory.reports.util.EOXSoftwareXMLParser.postToCCO(EOXSoftwareXMLParser.java:646)
at com.cisco.nm.rmeng.inventory.reports.util.EOXSoftwareXMLParser.fetchEoxSoftwareZip(EOXSoftwareXMLParser.java:101)
at com.cisco.nm.rmeng.inventory.reports.datagenerators.SystemPsirtRDG.getData(SystemPsirtRDG.java:64)
at com.cisco.nm.rmeng.inventory.reports.job.SystemJobExecutor.generatePsirtData(SystemJobExecutor.java:227)
at com.cisco.nm.rmeng.inventory.reports.job.SystemJobExecutor.main(SystemJobExecutor.java:525)
[ Wed Jul 13 13:45:12 CEST 2011 ],ERROR,[main],com.cisco.nm.rmeng.inventory.reports.util.EOXSoftwareXMLParser,fetchEoxSoftwareZip,103,no protocol: com.cisco.nm.rmeng.inventory.reports.util.IRException: no protocol:
at com.cisco.nm.rmeng.inventory.reports.util.EOXSoftwareXMLParser.postToCCO(EOXSoftwareXMLParser.java:739)
at com.cisco.nm.rmeng.inventory.reports.util.EOXSoftwareXMLParser.fetchEoxSoftwareZip(EOXSoftwareXMLParser.java:101)
at com.cisco.nm.rmeng.inventory.reports.datagenerators.SystemPsirtRDG.getData(SystemPsirtRDG.java:64)
at com.cisco.nm.rmeng.inventory.reports.job.SystemJobExecutor.generatePsirtData(SystemJobExecutor.java:227)
at com.cisco.nm.rmeng.inventory.reports.job.SystemJobExecutor.main(SystemJobExecutor.java:525)
[ Wed Jul 13 13:45:12 CEST 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.util.EOXSoftwareXMLParser,fetchEoxSoftwareZip,104,Exception occurred while accessing the CCO Server. If any EoS/EoL Software data exist in RME DB, This Report job will fetch from RME DB and show the EoS/EoL Software Information.
Also, customer is running proxy server too :-
[ Wed Jul 13 13:45:13 CEST 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.util.EOXSoftwareXMLParser,GetURLFromPSUApi,525,Proxy configured is true:
[ Wed Jul 13 13:45:13 CEST 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.util.EOXSoftwareXMLParser,GetURLFromPSUApi,533,Proxy Server:merkur Proxy Port:3128
[ Wed Jul 13 13:45:13 CEST 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.util.EOXSoftwareXMLParser,GetURLFromPSUApi,552,Setting proxyHost and proxyPort details into System properties.
[ Wed Jul 13 13:45:13 CEST 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.util.EOXSoftwareXMLParser,GetURLFromPSUApi,572, mdf and sof id 280915376 280775123
[ Wed Jul 13 13:45:20 CEST 2011 ],INFO ,[main],com.cisco.nm.rmeng.inventory.reports.util.EOXSoftwareXMLParser,GetURLFromPSUApi,575,url now {PSIRT_EOX_OFFLINE.zip=}
Kindly check if customer is able to download other device packages or updates easily.
Thanks,
Gaganjeet -
LMS 4.2.2 - Compliance Policy and PSIRT/EOX Job Report
I noticed that the job titled Compliance Policy and PSIRT/EOX Job Report has been running since oct 4, 2012 @ 00:30:00. I can see that previous jobs usually take about 3 minutes to complete. Is there a way to stop the job? Is it safe to stop the job? TIA
Hi,
you seems to be hitting the below BUg
LMS4.2.1: System Psirt Job failing
CSCua64861
Applicable to 4.2 as well.
Thanks-
Afroz
****Ratings Encourages Contributors**** -
LMS 3.2 Job Information Status
Hello
In LMS portal, Job information status shows system jobs that have a missed start as the status. These jobs are old versions of jobs (Mon Jun 29 03:00:00 CEST 2009) and the new versions have been running as they should.
The question is how to delete these missed starting job from the preview window. Deleting the job in Job Browser results in:
Can not delete the following jobs:
1039.26 - Can not delete system job 1039
Thanks in advance.Hello Joe
This is how it look like in Job Information Status
1039.26 ChangeAuditDefaultPurge Missed start ChangeAudit Records - default purge job eydfinnur
Mon Jun 29 03:00:00 CEST 2009
Job details:
Change Audit Report
Job Summary
Runtype: Daily
Start Time: Mar 09 2010 03:00:00
Purge Change Audit data older than: 180 days
Purge Audit Trail data older than: 180 days
Job Type: Change Audit Default Purge -
Hi All,
I cant get to stop SharePoint foundation web app service. Its stuck on status stopping
I have tried the following:
reset IIS
restarted the Timer Service
When I try to use powershell command to stop I get the following error:
Can anyone who went through this help PLEASE
Stop-SPServiceInstance : An object of the type
Microsoft.SharePoint.Administration.SPServiceInstanceJobDefinition named
"job-service-instance-1ff39eb2-12d2-457d-a749-265e350eb1b1" already exists
under the parent Microsoft.SharePoint.Administration.SPTimerService named
"SPTimerV4". Rename your object or delete the existing object.
At line:1 char:127
+ ... pplication"} | Stop-SPServiceInstance
+ ~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...ServiceInstance:
SPCmdletStopServiceInstance) [Stop-SPServiceInstance], SPDuplicateObjectEx
ception
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletStopServ
iceInstanceHi,
It seems that the issue is in the timer job definition for executing this operation.
My suggestion is to start the service again and delete the job definition from the error and again try to stop it.
This might be helpful:
http://sharepoint.stackexchange.com/questions/22368/is-there-a-powershell-cmdlet-to-delete-a-timer-job
I had a lot of issues in the past when try to stop this instance after the Web apps are provisioned.
As general rule now If I have multi-server Farm topology that has servers that should not serve Web App requests I turn off the service prior to provisioning any Web Apps in the Farm.
BR,
Ivan -
Report program when run in background job getting cancelled immediately
Hi
When i run a program in foreground i am able to see the output. But when run in background not able to run the job successfully. The job is getting cancelled immediately.
I am using the below function module for output display. Should i need to pass any parameters in the below function module so that i can run the program in background successfully.
CALL METHOD DETAIL_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = IS_LAYOUT
I_SAVE = 'A'
IS_VARIANT = GS_VARIANT
CHANGING
IT_FIELDCATALOG = IT_FIELDCATALOG
IT_OUTTAB = BLOCKED_STOCK_TAB_ALV[].
Please suggest.
Thanks and regards
Rajani YeluriHi Rajani.
ALV require the DRYPOR(screen) for display but incase you run in back ground which have to write to spool but in spool we can only write in format of LIST REPORT not inter-active report like ALV. That why
system cancelled your process immediately.
Hope it helps.
Sayan. -
Report Job was cancelled upon user request???
Hi,
My reports take more than 10 minutes to complete, most times I get
"Report Job was cancelled upon user request".
error, how to fix this problem? Is there any time limit inside the report I can set.
Thankshi ,
There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
Hope this helps
Manoj -
Hi ,
I have a requirement in which I have to create a report that should pickup all the cancelled CRM marketing jobs (due to whatever reason) based on on job name, copy them and restart them.
In your selection screen, you will give the cancelled job name (wildcard acceptable..like ZE00*) and a radio button to show the cancelled job list and copy the jobs.
Could anyone guide me on how to go ahead with this report?
Regards,
MohitHi,
in table TBTCO and TBTCP you have all jobs with current status. You can search them by name.
Selected jobs you can "popup_with_table" FM. Then you need to use fm to submit job in ackground;
'JOB_OPEN', 'JOB_SUBMIT' and 'JOB_CLOSE'.
Good luck ! -
I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?
What file format did you export it to?
-
How To Handle With Back Ground JOB From WEBUI When Click On "Appove"
Hi
How To Scheduled A Job Through ABAP Report In back end Of CRM when i click on "Approve" Button in WEBUI From result list.
As per My requirement I have a Search View and Result View
In Search View I have Below Fields
ITC Vendor ID
Claim Status
User status (date status changed)
Model
Serial Number
Date completed of Service Completion
Based on Search Criteria I will get Result In Result View.(Suppose 10 Records I got In Result View)
In the Result View I need to Add one Button As "Approve"
When i Click On Approve button One Pop up Message Need to Open And In that popup window I need to Display Below Text
"Approve Claim Job Has Started In Background
Note: Only Claims Which are in Submitted Status Will be Approved. you May Close This Window"
In SAP CRM System Back Ground Job Need To Start When Click On "Approve" Button In WEBUI .
In the Back Ground ABAP Report which will validate based on Result List Records"
In the Result List we may have all types of Claims which are status in "Submitted" "Pending" "Rejected" "Approve".
I need to collect all records from Result list and validate Those Records who's Status in "Submitted
1)Sort all the claims based on ITC Vendor ID.
2)Grouped all the submitted claims against each ITC Vendor ID from the search result
3)Change the status of the selected submitted claims to Approved.
4)Displays information messages as mentioned whenever a claim is approved, the same message will be captured in the job log.
‘Claims <ClaimID 1>,…<ClaimID N> now approved for ITC Vendor ID’.
5)Sending Email to each IRC.
6)Capture all the approved claims in the below format (Format Attached "Screen Shot Attachment")
7)Store the file in the Application Server AL11 in .csv format
Please Find Attachement For Reference.
1)ITC Claim Screen Shot
2)Screen Shot For Attachment
Thanks
RajHi,
You can add the following code in on approve method to show popup to the user,
IF req_edit IS NOT BOUND. " gloabl attribute in impl class of the view
REFRESH lt_buttons.
lss_button-id = 'btnyes'.
lss_button-text = 'YES'.
lss_button-on_click = 'YES'.
APPEND lss_button TO lt_buttons.
CLEAR lss_button.
lss_button-id = 'btnno'.
lss_button-text = 'NO'.
lss_button-on_click = 'NO'.
APPEND lss_button TO lt_buttons.
CLEAR lss_button.
CALL METHOD comp_controller->window_manager->create_popup_2_confirm
EXPORTING
iv_title = 'ATTENTION'
iv_text = 'Are you sure you want to edit this document?'
iv_btncombination = '99'
iv_custombuttons = lt_buttons
RECEIVING
rv_result = req_edit.
req_edit->set_on_close_event( iv_event_name = 'EDIT' iv_view = me ). "#EC NOTEXT
req_edit->open( ).
RETURN.
ELSE.
lr_node ?= req_edit->get_context_node( 'OUTPUTNODE' ).
lv_outbound = lr_node->get_event_name( ).
* CLEAR ptc_pricing_status.
* lv_outbound = req_edit->get_fired_outbound_plug( ).
IF lv_outbound = 'YES'.
you can use the submit report code here and you can al the validations here
ELSE. " No
if user clicks no nothing to do..
ENDIF.
CLEAR req_edit.
ENDIF.
Best Regards,
Dharmakasi. -
Schedule jobs witj job open, submit and close
Hi gurus,
I need to know if there is any way to schedule various jobs using the FM job_open job_submit and job_close. Like schedule the first job for a date and a hour and schedule others jobs to run after the first job sequential.
Its this possible?
Thk in advanceHi
see the sample code for the Job scheduling using the fun modules
IF p_bjob = 'X'.
CONCATENATE sy-cprog sy-datum sy-uzeit
INTO jobname SEPARATED BY '_'.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = jobname
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
IMPORTING
out_archive_parameters = arc_params
out_parameters = print_params
valid = valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF valid = chk.
SUBMIT yREP WITH s_kunnr IN s_cust
AND RETURN
USER sy-uname
VIA JOB jobname
NUMBER jobcount
TO SAP-SPOOL
SPOOL PARAMETERS print_params
ARCHIVE PARAMETERS arc_params
WITHOUT SPOOL DYNPRO.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = jobcount
jobname = jobname
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
invalid_target = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
MESSAGE i029 WITH jobname.
ENDIF.
ELSE.
MESSAGE s000 WITH text-003.
STOP.
ENDIF.
ENDIF.
Regards
anji -
Problems creating background job for program (job open, submit and close)
Hi gurus,
im trying to start a background job using the FM BP_START_DATE_EDITOR to show the start date to the job or if it's imediate. this FM it's working fine, after call it im opening a job, submiting it and call the job close FM and the job close FM creates me the job.
The problem it's when i go to the sm37 to see the job status the job has been canceled, and the job log says that i have to give a start date to the job.
What i dont understand it's either the job is imediate or i choose a date to start the job always gives me this error...
Below goes my code,
any ideas will be rewarded
CLEAR: stdt_modify_type, stdt_output.
CALL FUNCTION 'BP_START_DATE_EDITOR'
EXPORTING
stdt_dialog = 'Y'
stdt_input = stdt_input
stdt_opcode = 14
IMPORTING
stdt_modify_type = stdt_modify_type
stdt_output = stdt_output
EXCEPTIONS
fcal_id_not_defined = 1
incomplete_last_startdate = 2
incomplete_startdate = 3
invalid_dialog_type = 4
invalid_eventid = 5
invalid_opcode = 6
invalid_opmode_name = 7
invalid_periodbehaviour = 8
invalid_predecessor_jobname = 9
last_startdate_in_the_past = 10
no_period_data_given = 11
no_startdate_given = 12
period_and_predjob_no_way = 13
period_too_small_for_limit = 14
predecessor_jobname_not_unique = 15
startdate_interval_too_large = 16
startdate_in_the_past = 17
startdate_is_a_holiday = 18
startdate_out_of_fcal_range = 19
stdt_before_holiday_in_past = 20
unknown_fcal_error_occured = 21
no_workday_nr_given = 22
invalid_workday_countdir = 23
invalid_workday_nr = 24
notbefore_stdt_missing = 25
workday_starttime_missing = 26
no_eventid_given = 27
OTHERS = 28.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
MOVE 'X' TO gv_flag.
ENDIF.
DATA jobname LIKE tbtcjob-jobname.
DATA jobcount LIKE tbtcjob-jobcount.
DATA job_release LIKE btch0000-char1.
DATA job_imediate TYPE c.
CLEAR: jobname, jobcount, job_release.
CONCATENATE 'MAPAEXEC' sy-uname sy-datum
INTO jobname SEPARATED BY space.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = jobname
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE i003(zmapas).
EXIT.
ENDIF.
SUBMIT z_mapa_execucao_orcamental
VIA JOB jobname NUMBER jobcount
WITH ano EQ ano
WITH so_perio IN so_perio
WITH so_date IN so_date
WITH so_org EQ so_org
WITH so_num IN so_num
AND RETURN.
IF stdt_output-startdttyp EQ 'I'.
CLEAR job_imediate.
job_imediate = 'X'.
ENDIF.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
calendar_id = stdt_output-calendarid
event_id = stdt_output-eventid
event_param = stdt_output-eventparm
event_periodic = stdt_output-periodic "?
jobcount = jobcount
jobname = jobname
laststrtdt = stdt_output-laststrtdt
laststrttm = stdt_output-laststrttm
prddays = stdt_output-prddays "??
prdhours = stdt_output-prdhours "?
prdmins = stdt_output-prdmins "??
prdmonths = stdt_output-prdmonths
prdweeks = stdt_output-prdweeks "?
predjob_checkstat = stdt_output-checkstat
pred_jobcount = stdt_output-predjobcnt
pred_jobname = stdt_output-predjob
sdlstrtdt = stdt_output-sdlstrtdt
sdlstrttm = stdt_output-sdlstrttm
strtimmed = job_imediate
targetsystem = stdt_output-instname
start_on_workday_not_before = stdt_output-notbefore
start_on_workday_nr = stdt_output-wdayno
workday_count_direction = stdt_output-wdaycdir
IMPORTING
job_was_released = job_release
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE i003(zmapas).
EXIT.
ELSE.
MESSAGE i004(zmapas) WITH jobname.
ENDIF.
Thanks in advance,
Best Regards
João MartinsHello João.
In debug mode, check the value of variables you passed to parameters sdlstrtdt and sdlstrttm.
As aditional info, I usually achieve your goal without FM BP_START_DATE_EDITOR.
Check this code:
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = w_jobname
IMPORTING
jobcount = w_jobcount
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
CHECK sy-subrc = 0.
CLEAR seltab_wa.
MOVE: t_jobs-param TO seltab_wa-selname,
t_processar-line+34 TO seltab_wa-low.
APPEND seltab_wa TO seltab.
seltab_wa-selname = 'P_LOJA'.
seltab_wa-low = t_processar-ficheiro+7(4).
APPEND seltab_wa TO seltab.
*** Submete o programa para o JOB
SUBMIT (t_jobs-repid)
WITH SELECTION-TABLE seltab
USER sy-uname
VIA JOB w_jobname NUMBER w_jobcount
AND RETURN.
*** Encerra o JOB
l_hora = sy-uzeit.
ADD 60 TO l_hora.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = w_jobcount
jobname = w_jobname
sdlstrtdt = sy-datum
sdlstrttm = l_hora
targetserver = w_servidor
IMPORTING
job_was_released = l_liberado
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
Regards.
Valter Oliveira.
Maybe you are looking for
-
Safari fails to open page when other downloads are in progress
I have a 2.8GHz 4GB Ram machine with Mac OS X 10.5.4 I have a broadband connection - approximately 500 Kbps It seems that ever time I have something downloading(e.g. a file from iTunes ) and I try to view pages with Safari I get the "Safari Can't ope
-
URGENT: Insert multiple rows in a view object cache from the same Page
Please let me know whether I can get insert multiple rows in the same view object from a single page. I'm using UIX on Jdeveloper 9.0.5.2 Thanks a lot.
-
XI 7.0 Visual Admin issue
Hello, I am trying to install XI 7.0 (NW 2004s). The installation was error-free. However, while doing post installation steps, Visual Admin threw a 'Session expired' error. Since then, I am unable to login to Visual Admin using J2EE_ADMIN (throws "A
-
API for Updating Quotations in PO
Hi all Can any one plzzz let me know if any API exists to Insert data in to Quotations from backend Thanks in Advance Regards Praveen
-
N95 can not phone anymore ! Help please !
Hello, I got my N95 8g 1 week ago. I updated the mobile with "nokia software updater" but the phone can not hook on any network to call since. I can go on internet (wlan) but I can t call or receive anything ! And when I try to connect the phone "man