Changed bash to tcsh in gui MAC OS 10.5.8 how to chage back to bash?

Hello everyone,
I've changed /bin/bash to bin/tcsh now the OS does not load, but terminal loads with no problem.
Tried to change the tcsh back to bash with chsh -s/bin/bash -
got this message:
Changing shell for root.
launch_msg(): Socket is not connected
chsh: Unable to open Directory node with name /Local/Default. Unable to open node.
Anyone have a suggestion, or can help?

Sounds like you are in "Single User Mode", which is not really the Terminal, it is just a command line interface.
EXACTLY what did you Orignally Change?
What utility was used?
What account did you change the default shell for?  Root?  Other?
Do you have a Backup?  If so, you might consider restoring from your backup.
You could re-install Mac OS X from the installation DVD (or was Leopard a multiple CD set?).  Then apply the combo updates to get back to 10.5.8

Similar Messages

  • My mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

    my mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

    It sounds like you destroyed your boot partition and the recovery partition.  Depending on it's age, your MacBook Air might be able to do a net boot.  Plug and ethernet connection into it and attempt to boot.  If it has the right firmware, it will find a net boot configuration on the net and boot that.  Then it will give you a Recovery Partition like display and allow you to reinstall the OS X version that came with it.... assuming that it was Lion or ML.  If your computer came with Snow Leopard, then even the net boot won't work. 
    At that point you need a bootable USB Key, or an external DVD drive AND a Snow Leopard installation DVD. 
    An Apple Store, if there is one nearby, MAY be able to get you going again.  However, whatever is on the SSD now will be toast too.

  • The internet updated without me knowing and now i can not pull tabs down to make a new window or change the order of tabs and i can't find out how to get back

    my mozilla updated without acknowledging me first. I open it and I come to find out I can not move the tabs over to the right or the left one spot or two spots they just won't move unless I close them. I use to be able to move there anywhere i wanted or pull down and it became it's own window. Now I have to right click to make it a new window and then I can't drag and drop other tabs into it to make a window with several tabs. How do I get this back to the way it was before?

    In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using
    Help > Restart with Add-ons Disabled ''(Flash and other plugins still run)''
    In the dialog, click "Start in Safe Mode" (''not'' Reset)
    Any difference?
    ''Note: on the new menu, Help is the ? icon toward the bottom.''

  • How can I change my twitter account on my mac?

    I deactivated my twitter account on the web a few months ago. I forgot to sign out from twitter app on my mac. I have new twitter account now. When I tried to use twitter app on my mac, I've seen my old account profile photo. But I couldn't delete my old account on my mac. Is there someone who knows how I can change my twitter account on my mac app?

    OK that's how you deactivated your Twitter account on Twitter, but I was responding to this part of your post: "But I couldn't delete my old account on my mac."
    Please describe how you tried to delete your old Twitter account from your Mac and what happened when you did it. (Hint: It should probably start with a visit to the System Preferences application, not a web site.)
    It would be helpful to me or the next user who sees this thread if you told us which model and year MacBook Air you have and what version of the system you run on it. Some of the suggestions might depend on either or both.

  • How do I change my email account on my mac from Mail to Icloud?

    Does anyone know how to change my mail account on my mac to I cloud? since i have changed to Icloud on my iphone it seems that I can't access the old mailserver anymore. What do I do?
    Thanks for any advise
    Alex

    Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
    Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
    Entering iCloud email settings manually in Snow Leopard or Leopard
    Entering iCloud email settings manually in Tiger

  • HT1637 How can i change my email address on my mac to my new email as my other one has been hacked

    How can i change my email address on my mac book air email that has already been on the mac book air to my new email as my old email address has been hacked and it will not let me change it

    Call the tech support for the provider of your old email. They will be able to change the password for you or if they can't they will shut the account down so that spammer is not able to use it.
    Allan

  • I'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?

    i'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?

    There isn't a way directly in Mail.
    Here's what google says: http://www.google.com/search?client=safari&rls=en&q=mac+os+x+mail+delayed+send&i e=UTF-8&oe=UTF-8

  • I changed my iCloud password on my Mac and now my iPhone and iPad keep automatically reverting to the old password which is no longer valid.  What should I do?

    I changed my password for iCloud on my Mac, but my iPhone and iPad keep reverting back to the old password which no longer works.  I cannot iMessage or purchase anything from iTunes. 

    Hello, on the Date...
    Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
    See which one your G5 has...
    http://eshop.macsales.com/item/Newer%20Technology/CR2032/ 
    http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/ 
    Have you blown the dust out lately, especially the Graphic Card & PSU?
    Get Temperature Monitor to see if it's heat related...
    http://www.macupdate.com/info.php/id/12381/temperature-monitor
    iStat Menus...
    http://bjango.com/mac/istatmenus/
    And/or iStat Pro...
    http://www.islayer.com/apps/istatpro/
    If you have any temps in the 70°C/160°F range, that's likely it.

  • I aam thinking of changing from a PC to a Mac.  Will I need to buy a new Apple compatible version of Lightroom, do I have to pay to upgrade or can I get the new version free?

    I am thinking of changing from a PC to a Mac.  Will I need to buy a new, Apple compatible, version of Lightroom, or can I upgrade to it, or can I get it free as I've paid for the PC version?

    Your licence is not platform specific, so Lightroom can be used on any two machines (Mac and/or WIndows), with one actually being used at any given time.
    So no, you're money's safe!

  • Using bootcamp was installing windows xp, at the select ntfs or fat format selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error.

    using bootcamp, was installing windows xp, at the select ntfs or fat format mistakenly selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error. and doesn't respond to press any key. When looking in the startup disk section, windows on boot camp can be seen, but not selected. (13"MacBook Pro  10.6.8)

    Have a read here http://support.apple.com/kb/TS1722 for solution.
    Stefan

  • If you've changed your startup options on mac to start in windows, how do you fix and go back to mac on startup?

    if you've changed your startup options on mac to start in windows, how do you fix and go back to mac. I can't get my mac to switch back to mac, it is like stuck in widows mode, I have tried holding down the options key upon start up and that did not fix it either.
    Please help! Thank you so much!

    The Apple drivers you install in Windows also puts a Startup Drive icon in the Task Bar. Choose that to change the startup disk back OS X.

  • I posted in Mac pro Eplehust and Oslo in early June to change videokart (which has changed six months ago) got my Mac a month by mail, with the terrible damage the body, but the packaging in which he lay was not damaged. I sent him back to change t

    I have posted in Mac pro Eplehust and Oslo in early June to change videokart (which has changed six months ago) got my Mac a month by mail, with the terrible damage the body, but the packaging in which he lay was not damaged. I sent him back to change the computer, 4 weeks, I changed it and checked 2 more weeks. as a result of three days ago, got back, more than half the programs crash, I can not open or closed CDrom, some programs do not come off or stop, and stop responding commands, turn it off only mechanically, not any excuses, I did not get to the store, what should I do?
    My patience is crowded, nerves on edge, I have lost my time with the worst service of my life, the only thing I see its the draw Eplehuset and apple to court.
    my e-mail - [email protected]

    While writing I made a mistake... It is true I could become aware of the Scorpio incompatibility.
    I also tried the same identical procedure with a Seagate one. This disk and the same procedure was performed by some people I know on many MacBookPro Mid-2010 and everything was OK.
    We do not understand why this problenm occurs.
    Furthermore, If I installed the system on the broken HDD (that works, but sometimes it fails so badly and makes the system experience kernel panic) I could boot from it.
    I guess it is because of the **** Apple FIrmware written on the label.
    Is it possible that I cannot manage to boot from my new HDD because it has not a "special" feature on it that makes it compatible with apple??? Why making things so **** difficult my god a closer world like Apple one is impossible to imagine.
    However Shootist007 thanks for your message, but given what I said I do not think is a cable problem.

  • I've just changed from a PC to a mac and have a large number of downloaded WMA music files (not i-tunes purchases) which I just can't get into my i-tunes library. File converters don't seem to work either. Any ideas?

    I've just changed from a PC to a mac and have a large number of downloaded WMA music files which I can't get into i-tunes. When the library was in Windows, i-tunes would convert the files automatically, but this doesn't happen now. I've downloaded a couple of file converters, but these don't seem to work either. Any ideas?

    iTunes for Windows (but not iTunes for Mac) can import and convert unprotected WMA tracks. If the tracks are protected by DRM (Digital Rights Management) then it will not accept them.
    One option would be to install iTunes on your PC, do the conversion, and then transfer the converted tracks from iTunes on your PC to iTunes on your Mac.

  • How do you change the format from Windows to Mac

    Does anyone know how to change the format from Windows to Mac? When I first bought my iPod I had windows but now would like to change this. Also is anyone aware why some tracks pause for 2 seconds and then carries on.

    Restore the iPod in iTunes for Mac. Restoring will erase and reformat the iPod's hard drive, reload the software with the Mac version and put it back to default settings. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to sync using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes

  • Changing current Apple i.d. to .mac address?

    Hi.
    My current iTunes ID is my e-mail address (through sbcglobal). I'm shutting this account down. I'd like to change my account to my current .mac account, and make that my global Apple ID.
    That Apple ID is already established; I use it for my mobileme account (and posting here).
    My question is, when I go into Apple ID (or through iTunes settings) to do this, while I still be able to access right-protected files I've purchased that are tied to that old e-mail address?
    The process is a bit confusing, and before I commit, I'd like to be sure I'm not screwing anything up. (Also, will I lose the contents of my iTunes wish list?)
    Thanks much!

    No, the method to do this isn't very intuitive.  To change your iCloud ID, go to Settings>iCloud, tap Delete Account, then sign back in with the new ID.  This deletes the account and your iCloud data from your device, but not from iCloud.  Provided you are signing back into the same account, your iCloud data will reappear on your device when you sign back in.
    To avoid losing photo stream photos, save them to your camera roll (if not already there) before deleting the account.  To do this, open your my photo stream album, tap Edit, tap the photos, tap Share, then tap Save to Camera Roll.

Maybe you are looking for

  • Material document ,quantity and stock location for a given material

    hello all, i have a requirement like this. in the selection screen i have, material..... plant.... posting document date..... i need to get material document number,quantity,units and stock location for the above mentioned selection criteria... what

  • Rename, New folder action using Drive CMIS connector

    I am trying to work on "Rename" and "New Folder" actions from Drive. To give more details - when I connect to our DAM using Drive, the DAM gets mounted as a network drive and can be accessed from Windows Explorer. I was told on one of the Adobe forum

  • My computer cannot run itunes 10 how do I use the itunes store

    I have itunes already but my computer is on the old side. I cannot access the itunes store to get new podcasts because it prompts me to download itunes 10 which I cannot run! What should I do?

  • How can i get this "input.readline()" in webdynpro

    i wanna get the the return message from a system Here is the system. When I "telnet XX.XX.XX.XX", it'll return"OK". Then "user user" also some info return like "login success". With Eclipse these codes are OK. out.println("user user"); out.flush(); S

  • Mac won't read camera.

    I'm sure there are dozens of threads on this site asking things like this but I'll ask anyways. My Mac will not detect my Sony Handycam. It is a Sony DCR-HC28. I have it connected to a Firewire USB chord into my Mac. My Mac is version 10.5.8. I opene