Changed battery in laptop and now when trying to open dreamweaver cs3, I get "licensing for this product has stopped working"... contact customer support (thats a laugh). So what now?
Changed battery in laptop and now when trying to open dreamweaver cs3, I get "licensing for this product has stopped working"... contact customer support (thats a laugh). So what now?
it says: You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT admin or Adobe customer support for help.
Well it seems I am only able to install this on a maximum of 3 computers so if I uninstall and reinstall I may have used up all three. What caused this in the first place?
And most licenses extend to 2 machines; not 3. Your computer's clock probably reset when you changed batteries. Is your computer's clock set to the correct date and time now?
See Activation & Deactivation Help
Nancy O.
Similar Messages
-
I am running CS6 on a 2014 21" IMac version 10.9.5. I have an earlier version of Illustrator on CS4. When launching the CS4 Illustrator the message says "License for this product has stopped working". What can I do to get this to work?
Mylenium,
Before downloading CS4 again, how do I uninstall the versions that are currently on my Mac?
Many thanks for your help! -
I just updated my mac from Tiger to Mountain Lion. wiped the computer clean and started fresh Loaded Photoshop elements 11 (brand new in the box) and when I try to start it - it comes up saying - Licensing for the product has stopped working contact for help. in Looking for help I was directed here. what do I do?
I don't know enough to not follow directions. I bought the software brand new in a sealed from factory box. Had it sitting around until - last week when I deleted flash on my computer and had to upgrade to the new OSX. Mountain Lion doesn't use iPhoto - so I had to go with something else. Since I already had this new - unopened package I opened it up. Shut down all running programs - inserted the disk and followed all the directions for installation. Still it didn't work.
I have now uninstalled it (the proper way) and am going to try again.
I appreciate your responses.
Thank you!
If this doesn't work - I am going to just buy Lightroom. -
trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem. -
Had to reinstall OS and now my "Licensing for this product has stopped working."
Had to reinstall OS and now my "Licensing for this product has stopped working." I have CS3
And that OS is....? You need to tell us at least that much and explain exactly how and why or else this is not going anywhere.
Mylenium -
I am still using CS3. A while back I received an error: "Licensing for this product has stopped working" for my CS3 programs. I used the recovery program suggested by Adobe and was able to get Illustrator, Flash and Dreamweaver to work, but I still can't open Photoshop or In Design. I went back to the Adobe site and did every other trick they suggested to fix the error, but nothing has worked.
I then tried to uninstall photoshop from my CS3 suite (so I could reinstall) but got a JavaScript Alert: "Critical errors were found in set up. Please see set up log for file details." Seeing as I am not the best with the behind the scenes technical stuff, I have no idea what this means or where the set up log even is. Any help anyone can provide?
I have had CS3 installed on my computer for over a year. I started having problems about 4 months ago.I am having similar problem. Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message. So now I can not run Illustrator, Photoshop, or even Adobe Reader. These are properly licensed for about a year. I get "License for product has stopped working". Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days. Was on phone support hold today for over 3 hours before line went dead with no help. What is up with adobe support? Can anyone help?
-
I had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I restarted the computer and tried again to run Photoshop and the same error message appeared. The message was followed by a message that stated that I needed to contact Adobe technical support and mention Error: 150.30. I need Adobe technical support to provide me a solution for my problem so I can continue using my Adobe products installed on my computer.
Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene -
Error "Licensing for this product has stopped working" when you launch Acrobat 9
Hi,
I'm part of service desk and my company has several thousand users of Acrobat. There has been strange issues reported since upgrading from 7.0.5 to 9.1 and a lot of them are uhappy. The latest issue is users started to receive the following error,
Error "Licensing for this product has stopped working" when you launch Acrobat 9 or Adobe Creative Suite 4 products. The link http://kb2.adobe.com/cps/405/kb405970.html#ErrorCodes has solution, but i tried everything given for 147-178, and nothing works. The users are highly frustrated. Any other possibilities? one collegue claims running simple reg cleaner could solve this issue.Wow,
I went through a "font crisis" on my MacBook about two weeks ago, and I reinstalled Snow Leopard, then restored everything from Time Machine backup. Everything but Office 2008 and CS4 was able to run from the restore, because there were preferences for both that wouldn't copy back to my Library (permissions).
I reinstalled both from the "original media" (dmg's) with my Time Machine and 2 other external HDs connected and mounted. I had no problems with either. In fact since I was re-installing from dmg's stored on my Time Machine drive, I had to have it connected to do this. Installing Office and CS4 from the dmg's took all of twenty minutes for both with no errors at all.
I'm glad you got everything taken care of, but anectdotal evidence tells me CS4 can be reinstalled with external drives connected and mounted. -
Need help FLASH not launching and not uninstalling "licensing for this product has stopped working".
Need help FLASH not launching and not uninstalling "licensing for this product has stopped working" and " you can only install one adobe product at a time please complete the other installation" Flash was working absolutely fine before, I have no idea why this happened.
I am having similar problem. Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message. So now I can not run Illustrator, Photoshop, or even Adobe Reader. These are properly licensed for about a year. I get "License for product has stopped working". Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days. Was on phone support hold today for over 3 hours before line went dead with no help. What is up with adobe support? Can anyone help?
-
I migrated photoshop CS4 onto my new mac laptop. Error message on startup: Licensing for this product has stopped working. Error: 150:30 What do I do?
Uninstall and run the Cleaner Tool
Uninstall Creative Suite 4 and point products (Mac OS X)
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
After many months of non-use, when I tried to open Photoshop CS4 Extended, I got an error message 148.3. "Licensing for this product has stopped working." I need help, please.
Error "Licensing has stopped working" | Windows
Error "Licensing has stopped working" | Mac OS
Mylenium -
When launching PS I get an error 150:30 "licensing for this product has stopped working". Does anyone know how to fix this? downloaded very recently from Creative Cloud
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc. -
When I try to launch my copy of PSE it tells me that licensing for this product has stopped working. Error code 150:30. Restarting does nothing. Any ideas?
Thanks!You haven't said what version of PSE you are using but the general solution to this problem is to re-install the product from your original disks. Have you got the disks for your product and the related serial number?
-
Why will Photoshop CS4 not open after loading to new iMac from an external hard drive and I get this message: Licensing for this product has stopped working:error code: 150:30
A Photoshop installation is tied to the machine it was installed on. Moving it to or from a hard drive breaks the licensing.
The answer is easy: Reinstall CS4 from your disc. and apply all updates.
Gene -
have cs4 on a disk and installing on a new computer with no disk drive. dragged application file onto a stick and transferred to the new computer. but am getting this error code when i try to open. any ideas? thanks for the help
Hello,
what do you think about download a PS trial version, install it and then use your SerialNumber to active it.
You could use http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html AND note the: "Very Important Instructions" mentioned there.
Hans-Günter
Maybe you are looking for
-
Do I lose High resolution video signal when I capture through FireWire?
I have being reading that capturing through Aja Kona video card is an uncompressed video capture. does it mean, I lose some part of my HD resolution video signal when I capture it through fire wire? Could somebody explain me? Thanks.
-
I create 2 processes in BPM studio 10g. User can use process A to invoke process B. Process B is exposed to web service (right click process -> Process web service) I copy the wsdl address and create a web service catalog component in Process A. Howe
-
Time Machine quit backing up files. Bought a new WD external drive. Worked for awhile, then quit backing up. Tried restarting computer, remounting drive. Message: Time Machine Error. Unable to complete backup. An error occurred when copying files. Su
-
Value not set to model for f:selectItem itemValue=" "/
I have a selectOneChoice which value is bound to a String property in backing bean. I select among several one-character values, single space is one of them. The original value is null. When I select the single space option, it is not set to the back
-
Missing I understand Risk Button
When I open my server's url so got error in firefox 31 "The certificate is not trusted because it is self signed" error and missing button is : I understand Risk But other's pc in it is wok fine.