Changed contact name after 10.2 upgrade

After I upgraded my Z10 to v10.2.0.424 my contact entry name changed from my name (format: first last name) to my birthday (format: YYYY-MM-DD 00:00:00)?!?! I went to edit my contact entry and I can chenge everyhing but the name. Any ideas on how to fix this?

it appears I didn't have the user's BBM PIN entered. when i entered it into their contact, saved. REOPENED the contact, their first and last name showed up.
Weird but true.

Similar Messages

Adding a new contact anymore after the IOS5 upgrade!

I can not add a new contact anymore after the IOS5 upgrade - the " + " sign is gone? - how can this be fixed?

I think cpohlink has made a good observation. The same issue- no plus sign- is showing up in both calanders and contacts for some people. I have the plus sign on both apps, and do not have the problem at all. So what is the difference?
I have i cloud turned off for everything but find my phone. And i am not synced to any external calander or contact list except my phone.
Change your cloud settings to off, and see if that does it. Also, think about what other clalanders/ contact lists you might be syncing with. If they ae considered the 'master' then that may make the pad pad a slave, and unable to add entries.
Related question, can you edit entries, or is that blocked as well?

HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
[Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Also take a look at this SDN thread, you might find something interesting.
[click here for SDN thread|How to change the hostname was set/defined in SAP system?;
Edited by: santra.anirban on Sep 13, 2010 10:45 AM

MAY I CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

Hi,
Do not change the hostname after the installation, if you need to then you have to perform system copy.
Refer: Note 8307 - Changing host name on R/3 host: What do you do?
Regards,
SBK

Satellite L855-124 can't change display brightness after Win 8 upgrade

Hello everyone,
I have a problem with my Toshiba Satellite L855-124 PSKACE laptop.
After upgrading to Windows 8, I can't change the brightness backlight of the laptop screen.
There seems to be an error in the graphical driver.
When I install the Windows 7 graphical AMD driver under compatibility, it works again but bugs out on other areas.
Anyone have any ideas?
Even after using the upgrade assistant provided by Toshiba it does nothing.
Also the drivers for my laptop are poorly updated. Dating back to 2012.
I have also called tech support, they told me that a driver team will be fixing the issue.
That was 2 months ago.
Is there anyone from Toshiba that can help me with this please?
Thank you.

The document provides info about the notebook models:
Satellite L870, Satellite L875, Satellite C870, Satellite C875, Satellite Pro C870, Satellite Pro L870, Satellite C850, Satellite C855, Satellite L850, Satellite Pro L850, Satellite Pro C850
PSKBLE, PSC8EE, PSC8FE, PSKBME, PSKCCE, PSKCEE, PSKDLE, PSKDME, PSKDNE, PSKCDE, PSKCCR, PSC8ER, PSKCCF, PSKCCV, PSKCEV, PSKBLR, PSKDLV, PSKDLR, PSKDLF, PSKG9E, PSCBBE, PSKFPE, PSCBZE, PSCBYE, PSKG8E, PSKFNE, PSCBDE, PSCBYR, PSKFNR, PSKCER, PSCBCR, PSKG8R, PSKFLE, PSCBCE, PSKG8V, PSCBYV, PSCBYF, PSKG8F
Choose the driver released for the following models

Change Computer Name after first TC backup

Has anyone tried changing their Computer Name after the first TC backup. The sparse image created on the TC which contains the backup has the computer name as the first part of its name, presumably any change of computer name would have to automatically change the name of that sparse image. I would like to change the name of my iMac from the default but don't want to do this if I have to do a brand new full Time Machine backup afterwards.

I have changed the computer name (in System Pref: Sharing) of an iMac on our network after the initial backup to TC. There was no problem. This is due to the fact that TC uses the MAC address (also called Ethernet ID) to differentiate machines connected to it.
You can see your machine's MAC address in the advanced area of the Network SysPref under the Ethernet Tab. This number is also in the .sparsebunle idisc image created by TC.
Good luck with the name change.

Bug in Changing Contact Names

Recently as I've changed my contacts' names (from the conversation window), Skype has simply corrected them to 'sex'. That's it. 'sex'. However, when I navigate away from the chat and come back to it, the changed name is now reflected.
This has shown up for all contacts I've tried to change! It's amusing, but nsfw. I hope the bug can be resolved soon!

I always find editing contacts using Ovi suite on the desk top works better than on the phone, then just sync contacts !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

BBM contacts restore after an OS upgrade from 7.0 to 7.1

Torch 9810, OS 7.1, SD card support with 14G free space
After an upgrade of BBM8.5, my phone could not complete booting fo several time until I flashed it but with OS7.0, this did not restore my BBM contacts; I used my computer to restore phonebook contacts and other data but BBM contacts still was not loaded.
I re-installed BB8.5, still to no avail. 3 days later I was re-prompted to sign in with my BB ID and I got all my 181 BBM contacts back. (Is this a remotely initiated action?)
After this I re-installed BB OS 7.1 and again I lost my BBM contacts. I have tried everything possible to get these BBM contacts but no way; but I am sure it is somewhere in RIM remote server.
These are my questions:
Does BB OS 7.1 supports the easy backup and restore of BBM contacts just as it does for phone contacts?
Can you make it easy for BB users to be able to restore BBM contacts as it is possible with phonebook contacts?
On the custom restore option on the BB Desktop software, what is tab to select for BBM contact restore after an upgrade/update?
Does Blackberry protect saves BBM contact details?
Is there an unshared info/law that must be respected in getting back BBM contacts, like "wait 72hrs after an upgrade before getting back your BBM contacts?????????
I do not have problem with Phonebook restore at all. That comes easy with my computer back-up but BBM contacts restore is a pain in the neck! Please help.
NB: I need to add that various suggestions seen on the site have not worked and I saw that my suffering on BBM contact restore is almost becoming an epidemic!!!

Torch 9810, OS 7.1, SD card support with 14G free space
After an upgrade of BBM8.5, my phone could not complete booting fo several time until I flashed it but with OS7.0, this did not restore my BBM contacts; I used my computer to restore phonebook contacts and other data but BBM contacts still was not loaded.
I re-installed BB8.5, still to no avail. 3 days later I was re-prompted to sign in with my BB ID and I got all my 181 BBM contacts back. (Is this a remotely initiated action?)
After this I re-installed BB OS 7.1 and again I lost my BBM contacts. I have tried everything possible to get these BBM contacts but no way; but I am sure it is somewhere in RIM remote server.
These are my questions:
Does BB OS 7.1 supports the easy backup and restore of BBM contacts just as it does for phone contacts?
Can you make it easy for BB users to be able to restore BBM contacts as it is possible with phonebook contacts?
On the custom restore option on the BB Desktop software, what is tab to select for BBM contact restore after an upgrade/update?
Does Blackberry protect saves BBM contact details?
Is there an unshared info/law that must be respected in getting back BBM contacts, like "wait 72hrs after an upgrade before getting back your BBM contacts?????????
I do not have problem with Phonebook restore at all. That comes easy with my computer back-up but BBM contacts restore is a pain in the neck! Please help.
NB: I need to add that various suggestions seen on the site have not worked and I saw that my suffering on BBM contact restore is almost becoming an epidemic!!!

Changing domain name after 12i installation

Hi all,
I misspelled my domain name during the 12i installation on Linux platform. i know it can be done by changing the context files of both application tier and database tier and running autoconfig after that, But i don't know the exact procedure to do it. Metalink note 387859.1 isn't very helpful to me. There are some notes for 11i on metalink but those are not helpful. Can any body tell in few straight forward steps how to change the domain name after 12i installation. Any help appreciated.

I misspelled my domain name during the 12i installation on Linux platform.Was the installation successful? Did the post installation steps complete successfully?
But i don't know the exact procedure to do it- Deregister the current database/application server
- Update the AutoConfig Context files (database and application)
- Shutdown the Applications Services
- Reseed the Net Services Topology Model ***
- Start the Applications Services
Check the following note (Under Net Services Section) for the required steps to deregister a database/applications tiers from the Net Services Topology Data Model:
*** Note: 387859.1 - Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=387859.1

IPhone freezes when I change contact name

Hello guys
So, my girlfriend has an iPhone 5S and when I/She try to change the name of any contact the smartphone freezes and I have to power it off.
I tried updating it to the lastest iOS version but it didn't solve the problem.
What should I do?

Hi Jersep,
Since this is an issue that has carried over from one device to a new device, it seems like the source of this issue may be from your data in your backup. Try using the following article to restore your software and test the device as a new phone, free from your backup data, to see if this affects the issue:
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
Thanks for coming to the Apple Support Communities!
Regards,
Braden

How do I change device name after connecting to old machine?

That's right, I've gone ahead and connected my new power book to my old dual G5 in order to get the information onto the new machine.
Now, my new machine has my Dual G5 name as it's device name.
How can I change this so my power book has the correct name?

I wish that was it, but that only changes the name of the "Hard Drive", not the actual device name.
In other words, when browsing the network there's 2 computers with same name.
Any other suggestions?

Changing photo name after downloading

I downloaded a group of photos to my computer and wanted to rename each photo. When I attempted to do so, I received a message saying "changing file name extension may make file unusable". When I did it, the photo disappeared. Why can I not change the name? I have done so in the past with no problem using a different camera.

Hi Nancy,
Are you trying to Rename the files using Photoshop Album Starter Edition or simply from Windows Explorer. In either case, you should rename only the file name and leave the extension as it is. For example, if your file name is "file1.jpg" you should only change 'file1' and leave ".jpg" as it is. Otherwise, Windows will not be able to recognize the file as a picture file.
~Vibha~

Change role name after copying

I copied a role (Business Explorer) and want to rename the role.
Changing the name does not help, because only changes to other languages than the original language are taking effect.
Changing the ID is possible, but there I am not allowed to change the name.
How can I change the name of the role in the original language?

I found the solution. I created the role in language "EN".
I wanted to have the name change in language "DE". Therefore, I had to translate the role name.

HT4864 How to change email name after account is already created

I already have an email account but I want to change the email name, not the name on the account. Is it possible to change the email name?

Settings>Mail, contacts, calendars>
Choose the mail account
Erase the existing name or part of the name that you want to change and retype the correct name. I made a spelling error in my display name when I initially set up the account. I tried to change just the one wrong letter but it would not save, so I finally erased the entire word and retyped it and it worked!

How to change table name after creating page and application

Hi HTMLDB Team,
i have created a application with page where the region use master detail form with table name emp.Now after developing the page and the application i want to change the table from emp to emp2 where emp2 is the table with same structure of existing emp and same field properties.How can i edit the table as emp2 ?
Thanks in advance,
Cheers,
koushik

Koushik,
Depending on the amount of customizations that you did, it may be easier to use the wizard to re-create the master-detail form & report.
If you still want to give it a go:
Assuming that you created the 2-page Master Detail report & form:
On the first page, you will have to chage the SQL to reflect the new table name. Once you do that, you'll have to re-create the link on the EMPID column.
On the second page, you'll need to do some more work. You'll have to change both Page Rendering Processes: Fetch Row from EMP and Get Next or Previous Primary Key. You'll then need to change the Page Processing Process: Process Row of EMP. Also, ensure that you have a proper Foreign Key relationship between EMP2 and DEPT (or your detail table).
Thanks,
- Scott -

Changed contact name after 10.2 upgrade

Similar Messages

Maybe you are looking for