Changed date and time and lost reference to proxy files

I had a batch of transcoded proxy files (from a Canon 550d) that had the wrong time on them. I used "Modify > Adjust content created date and time" to shift them by an hour. FCP now reports "Missing Proxy" for all of them. I've checked in the events folder and all the proxy files are still there, it just seems FCP has lost its reference to them.
I can re-transcode them but of course that takes a long time. Two questions: anyone any idea why this happened and is there a way to re-link FCP with the existing files?
Curiously I adjusted the time on some files that had been transcoded from a AVCHD source and these are still OK!
(Using V 10.0.5 on a 2011 MBA with LaCie Thunderbolt disc)

In the end I re-transcoded the files but I think this article may have been the answer:
http://www.larryjordan.biz/fcpx-relinking/

Similar Messages

No longer able to use + and - keys to change dates or time?

I recently upgraded from an igloo iMac running OS 10.3.9 to a new Mac mini with 10.5.8 (awaiting upgrade to Snow Leopard).
I used to use the + and - keys all the time to change dates and time in iCal, but have been unable to since my upgrade. Has that functionality been deleted, or is there a way to do it that I have just not discovered yet?
Thanks.

Forgotten Passcode or device disabled after entering wrong passcode
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

Changing Date and Time

I have selected both photos and event separately in several attempts to change date and time in Photos/Adjust Date and Time without success. Each time I have attempted to do so another date and time has replaced the previous one but each has been incorrect. Some dates have been inserted dating back several centuries!! The time as well as the date has been incorrect.
I would appreciate suggestions and help in making the change correct.
Thanks.
Vernon

I also have this problem. One folder in particular is affected; within it after a few times to get it into the 2000's from 1900's, it is currently showing 1539.
I am at a loss since the batch change roller lets me select the correct year in iphoto.
I thought it might be a glitch in the older software so upgraded to the '11 iphoto. This made no difference at all.
This is still an issue unless the original poster got an answer or worked it out him/her self.
I also use Picasa on the same system but since it gets the photos from iphoto, it gets its errors there too.

Changing date and/or time of photos

I often change the time of individual iPhoto pictures to change their order in the photo Library.
I change the date and or time in the information section. I have iPhoto sort the photos by date.
I just imported about 1200 photos from a DVD and want to change the order of some of them, but when I change the time, the new time stays there, but the photo either does not move or moves to the incorrect place. I have closed and reopened iPhoto and even restarted the computer.
I would appreciate any help or suggestions.
Thanks in advance.

Try using the Photo menu ==> batch change date and time (if the photos either do not have a data and time or they are not in the date time sequence you want or the adjust date and time (if you want to add a constant amount to all photos selected keeping them in the same date/time sequence but with a different date and time - and select the change the original option
LN

SCCM 2012 R2 changing date and time for patching software update groups

I recieve this error when changing date and time for software update group. worked fine yesterday before patches to the server were applied last night. we removed patches but still get error below. Any help would be great.
ConfigMgr Error Object:
instance of SMS_ExtendedStatus
Description = "Property array AssignedCIs exceeded the max allowed";
ErrorCode = 1078462259;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspupdatesassignment.cpp";
Line = 94;
Operation = "PutInstance";
ParameterInfo = "";
ProviderName = "ExtnProv";
StatusCode = 2147749889;
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException
The SMS Provider reported an error.
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(IResultObject resultObject, List`1 resultObjectsPut, Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.Put(ActionTrigger trigger)
System.Management.ManagementException
Generic failure
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(IResultObject resultObject, List`1 resultObjectsPut, Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.Put(ActionTrigger trigger

no it is the final version... is working today after cleaning up database... is working now...thanks
Hello Robert,
would you please give some more informations, as I have the same issue and don't get what you mean bye "cleaning up databases".
Regards ooGDoo
ooGDoo

My ibook keeps shutting down completely with the date to reverting back to 1969. i restart only after i plug in charger it lets me, then change date and save. the next time i use same thing happens, safari, iphoto, email are the only ones i have used.

my ibook keeps shutting down completely with the date to reverting back to 1969. i restart only after i plug in charger it lets me, then change date and save. the next time i use same thing happens, safari, iphoto, email are the only ones i have used.
please help! i am at a loss here.
thank you, movie lady
ibook g4

The iBook does not have a backup (PRAM) battery. It only has the main battery and a small capacitor which maintains the settings long enough to do a battery swap. If the battery is dead, what you are seeing can happen.
If the battery is not a problem (or even if it is), you could try resetting the PMU and see if that helps.

Why does calendar keep changing dates and times on icloud

My calendar keeps randomly changing dates and times when using icloud and it is doing my head in.
Is there a simple way of rectifying this or do I have to get rid of icloud altogether (to save my sanity?)

If this is an iCloud calendar, you might want to check your time zone and time zone support settings. Go to icloud.com, sign into your iCloud account, click your name at the top and choose Account Settings, click Time Zone and be sure it shows the correct time zone and that you have selected a city near you. Then open your calendar on icloud.com, click the gear-shaped icon on the bottom left and choose Preferences, click the Advanced tab and make sure you have not checked time zone support at the top.
On your iOS devices, go to Settings>Mail,Contacts,Calendars>Time Zone Support (in the Calendars section) and make sure this is set to Off.

HT3140 put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bou

put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bought this computer

It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
Was there an update maybe ?

Not allowed to change date and time for some photos; why?

I have some images that I scanned in of old photos. I'm trying to change the date and time and location to reflect the time the original photo was taken. I know how to do it in the menu system, but when I try to change the original data it tells me they are of a file type that won't allow this metadata to be changed. They are simple JPEG's so I'm not sure what the problem is. Do I need to convert it to some other format first to be able to do this? Any ideas would be helpful...

Hello Toran,
are trying to change the date and time of the versions only, or are you trying to change the date and time of the masters too? If you are using
Meta Data -> change date and time
deselect "also change master file", this causes the problem, the new Aperture version seems not to allow to change the date and time of masters.
There have been long discussions on this problem, see e.g. this thread; I do not know if somebody has found a solution by now,
Regards, Léonie

Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

My app store is saying i have to change date and time setting to get a secure connection but the date and time are correct please help?

My app store is telling me i have yo change date and time setting to download apps and idk what is wrong cause date and time are correct

Is the Time Zone also correct?
Also see:
Can't connect to the iTunes Store

Unable to Determine the Change Date and Time for records in infotype 2011

Hi Everyone,
We need to know on when the clock-in and clock-out records were interfaced to SAP in infotype 2011.
The change date/time field in infotype 2011 is blank/not populated. Hence, we're unable to determine on when the clock-in records were updated in infotype 2011.
It is not possible to get the audit logs for infotype 2011 as it is switched off.
We found this table TEVEN and just the same thing, the field "change on" is blank.
Kindly help us on how we can determine the change date and time for records in infotype 2011.

Hi Prasad,
Here's the scenario.
On June 3, it was reported that staff's clock-in record on june 1, 7:00AM is missing in infotype 2011.
However, when I checked infotype 2011, the record is there.
So, they are now asking me on when this record was updated in infotype 2011 as they are thinking that there might be some delays in sending of the data to SAP.
The created on and created at in table TEVEN shows the same, june 1, 7:00AM which seems to be not true as on june 3, it was reported to be missing.
Can you help further on this?

I've changed computers and lost my music?

I've changed computers and lost my music? What to do? I signed in and a blank library came up.

Your music is where it always has been, on the other computer. Music downloads to the computer via which you purchase the track; you don't see it just because you log into the iTunes Store on another computer. If you still have access to that other computer, you can copy the iTunes library from that computer to your new one.
If, however, you don't still have access to that old computer and you are in the US, make sure you have at least iTunes 10.3.1, then go to the iTunes Store, log into your account, and click the new Purchases link under the Quick Links. The new iTunes in the Cloud service, currently in beta as part of iCloud, may allow you to re-download your purchased content (music, videos and TV shows are only available to US users at this time). You can also do this from an iOS device.
For more information, see:
http://support.apple.com/kb/ht2519
If you are outside the US, then you normally get only one download per purchase. If you don't have access to the old computer, or have a backup or have the tracks on a iPod or other iOS device, then you'll have to contact the iTunes Store, request a second download, and hope they'll make an exception for you:
http://www.apple.com/support/itunes/contact.html
Regards.

Severa years ago I purchased online Adobe Creative Suite, I recently had to change computers, and lost the program, when i attempted to restore from a cd i received a notice that my serial number was incorrect??? I paid a lot of money for this program I w

severa years ago I purchased online Adobe Creative Suite, I recently had to change computers, and lost the program, when i attempted to restore from a cd i received a notice that my serial number was incorrect??? I paid a lot of money for this program I want this corrected.@

Hi gutturnio,
Kindly provide the below mentioned details in a "Private Message" so that we can assist you appropriately.
Product your are trying to install:
OS version:
Order #:
Serial #:
Email Id on which you have registered the serial number:
There could also be an issue with the compatibility of the software and operating system you are using.
Kindly check system requirements:
CS 6: System requirements | Adobe Creative Suite 6
System requirements | Photoshop
Meanwhile, try:
Error "The serial number is not valid for this product" | Creative Suite
Invalid serial number error
Thanks,
Atul Saini

I recently changed computers and lost all my playlists from my itunes on my computer, i have them still on my phone. Is there a way i can get them back without making them all again?!

i recently changed computers and lost all my playlists from my itunes on my computer, i have them still on my phone. Is there a way i can get them back without making them all again?!

If the books were purchased at the iBookStore, you will be able to redownload, like the apps. Some other sellers, like O'Reilly, also allow multiple downloads.
If you have (or can install) iTunes on a computer (Mac preferable, not mandatory) and run it then plug the device in, does it show up? If the computer can detect it, you can and should do a complete backup onto local storage immediately. That can then be used to reconstruct the content of the device on a new or repaired replacement. If you enable encryption, even the passwords will get saved.

Changed date and time and lost reference to proxy files

Similar Messages

Maybe you are looking for