Changed fonts for entire system when trying to change mplayer fonts

I was trying to make the subtitles in mplayer smaller and saw that one possible solution was to copy a new font into the mplayer/fonts folder and replace the shortcut.
I did the following:
#sudo cp /usr/share/fonts/TTF/times.ttf /usr/share/mplayer/subfont.ttf
To my horror this seems to have changed the default font for the entire system. I'm able to change fonts through "obconf", but apps like conky and pypanel don't response to these changes. How can I change things back? Or at least be able to customize the font in pypanel an conky so I can get a system wide font??
EDIT: Well, I fixed it. I just did the same, but with a font I like. Kinda weird way to change fonts, but it works.
Last edited by Perre (2008-04-13 17:15:59)

Still exactly the same problem after installing Arch X86

Similar Messages

Wireless Router asking for different password when trying to change settings

I have an "old" wireless router Linksys BEFW11S4 V2.
I am trying to change settings using the web interface.
I can get in using the "admin" password but as soon as I try to change anything (such as SSID, security, etc) and click "Apply", it asks me for a password. This time, the "admin" password doesn't work and I get to a red screen saying I entered a wrong password. I reseted my router and came back to the default but still, I get the same thing.
...any clues anyone?
Thanks.

Try upgrading the firmware from ftp.linksys.com/pub/network ..also after upgrade ...reset the router & reconfigure it ... See if it works ...

"an error occurred when trying to change modules"

When I switch repeatedly between Library and Develop with the R and E keys, I always sooner or later run into a problem where nothing happens when I press R. Really that should go the Develop module and enter crop mode -- what I'm usually trying to do, when this happens, is crop a bunch of photos. So I'll be using Library mode to identify the photos that need cropping, stepping through photos with the arrow keys, then when I find one that I want to crop, I press R, enter develop+crop mode, crop the photo, press E to return to library+loupe view, and continue.
Sometimes this works 10 times, sometimes it only works twice, but always, relatively soon, when I press R, "nothing" will happen. Actually what's happening is an error dialog appears saying "an error occurred when trying to change modules", then the error dialog immediately disappears before I can read it. I know what it says, because if I click the Develop module with the mouse, I get the same message but it sticks around until I press OK.
Once this happens, I'm entirely unable to use the Develop module until I quit the program. I had to quit and restart LR about 20 times during an hour of working with it last night, and this morning, in the first 15 minutes, I'm already on the 3rd restart.
Anyone else see this?
Details: LR 1.1 on Mac OS 10.4.10, 4-core Mac Pro, images are a mix of JPG from a pocket camera and NEF from a Nikon D40. I don't think it is related to the specific images, as it strikes apparently at random, and after exit and restart, I can crop that same photo, but a different one will eventually cause the same problem again.

Sean, thanks for the Return key tip. I knew about that at one point, but lately I was trying to use Enter (the one on the numeric keypad, at the very lower right corner of the keyboard, which is really easy to hit with my thumb even when my hand is on the mouse! And Enter doesn't invoke the crop, so I forgot that Return did). That is a better way.
I don't see the RE problem on my MacBook, only on my desktop computer, and that one is also experiencing other flakiness (
metamatt, "missing text / thumbnails / many Lightroom UI elements disappeared" #, 18 Aug 2007 3:08 pm) so I think I'm going to try a complete reinstall there.

Short Dump when trying to change configuration of BT112H_SC/OVViewSet (Service Contracts)

Hi Experts,
I have a problem with a component usage when trying to change the OverviewSet Configuration for the Service Contract. The whole component BT112H_SC is complete standard and no enhancements have been made yet.
When trying to change the configuration of the view OVViewSet there appears the error message:
'500 SAP Internal Server Error'
Error: Define Component Usage 'CUIR_Container' (termination: Rabax_State)
The place where the code dumps is shown in the attached picture with the name 'ST22'. The error screen when trying to change of the configuration is shown in the attached picture 'Configuration'
It seems like one error is appearing in Line 18 of the class CL_BSP_WD_REPOSITORY and method GET_CMP_USAGE_DEF:
Method: GET_CMP_USAGE_DEF.
method GET_CMP_USAGE_DEF.
   field-symbols: <USAGE> type BSP_WD_CMP_USAGE_DESCR.
   read table ME->USAGES with key USAGE_NAME = IV_USAGE_NAME
                         assigning <USAGE> binary search.
   if SY-SUBRC = 0.
*   Is usage active?
     if CL_WEBCUIF_SWITCH=>IS_ACTIVE( IV_SWITCH_ID = <USAGE>-SFW_DATA-SWITCH_ID
                                      IV_REACTION = <USAGE>-SFW_DATA-REACTION ) ne ABAP_TRUE.
*     usage switched off
       raise exception type CX_BSP_WD_INCORRECT_IMPLEMENT
         exporting
           TEXTID = CX_BSP_WD_INCORRECT_IMPLEMENT=>ACCESS_2_INACTIVE_ELEMENT
           NAME   = IV_USAGE_NAME.
     endif.
     RS_RESULT = <USAGE>.
   else.
   raise exception type CX_BSP_WD_INCORRECT_IMPLEMENT
       exporting
         TEXTID = CX_BSP_WD_INCORRECT_IMPLEMENT=>UNDEFINED_CMP_USAGE
         NAME   = IV_USAGE_NAME.
   endif.
endmethod.                    "GET_CMP_USAGE_DEF
Any Ideas? Do I have to create the component usage manually?

Hi Oliver,
Go to RTR->Viewset->OVViewset-> see whether any view 'CUIR_CONTAINER' is there in that viewset.
If it is there then u need to create component usage of that view. Or else remove that view from viewset.
Regards,
Arun

Hi. I was trying to open some pdf files and got a message my adobe reader was deinstalled. I installed a new version of Adobe Reader for Mac and when trying to open a PDF file I am getting a message in a foreign language. Any suggestions?

Hi. I was trying to open some pdf files and got a message my adobe reader was deinstalled. I installed a new version of Adobe Reader for Mac and when trying to open a PDF file I am getting a message in a foreign language. Any suggestions?

Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.

I accidentally screwed up my apple id when trying to change my primary email address. Password recovery options and security questions arent working either to restore

I accidentally screwed up my apple id when trying to change my primary email address. Password recovery options and security questions arent working either to restore. Created a new appleid just to get into forums to ask a question but hesitate to sync itunes and iphone with it as i may lose all purchased music apps etc. can anyone help? i have received no email response frm apple support, it's been over 48 hours

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

Changing URL for E_BUSINESS system

Hi,
how to change URL for E_BUSINESS system ? Should we only edit contexte .xml files and launch autoconfig? Which parameteres ?
Many thanks.

Hsawwan, thank you. I did this :
to modify "s_login_page" and run AutoConfig. Make sure you have the latest AutoConfig patch applied (Patch 5985992 - TXK AUTOCONFIG ROLLUP PATCH Q (JUL/AUG 2007))
Now it is OK for login page. But :
1-when entering in E_BUSINESS or OAM it goes back to ancient URL ? Should we change some other parameters ?
2-when loging in for example as sysadmin, first time it fails with this message :
You have insufficient privileges for the current operation.
we login again and it is ok , user can enter.
Many thanks.

'Blank user name' error when trying to change email password

My password on our mail server changed, when I tried to change the password on my Storm 9500 I get 'Blank user name' error when trying to change, but I have typed in a user name!!!!
BLOODY frustrating because now I am not receiving any mails at all, so my business out of the office has come to a standstill!!!!
Vicky
Solved!
Go to Solution.

Try changing the email password on your PC, if you are having problems doing so from your device.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Lr 2.2 broken - an error occurred when trying to change modules

I get the message "an error occurred when trying to change modules when I try to go into library mode. quit and restart didn't help. Catalog verified as okay. Worked before update.

Deleting preferences did not help. I also tried creating a new lightroom catalog, and can navigate around it fine. However, if I do something like change to Library in the new catalog and then open my useful catalog, I immediately get the error changing modules message. I tried reimporting my useful catalog, which also did not work. My understanding is that this error is some kind of catch all which could indicate any number of different issues - is there a way for me to roll back to 2.1? Is there a reason that so many people are having an issue with this upgrade (there are posts in other forums and blogs about people having this same issue after upgrading).

My MacBook Pro is asking for a password, when trying to play DVD. Anybody experienced that before.

One of user's MacBook Pro is asking for a password, when trying to play DVD. Anybody experienced that before?
Maybe the DVD itself is password protected, the user is travelling abroad.
Thank you in advance

Hi m,
My guess is the DVD is from another region than the one the optical drive is set to. Region changes are limited to 5 total, so it asks for the admin password to make sure you want to do it/allow it. After #5, the drive is locked to that region forever.

"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!

"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!

lots of people seem to be havgin a problem sending email from iCloud webmail.
does your email address have uppercase characters in it?
if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that

Particular font for entire pdf document

Can i set a particular font for entire pdf document while designing pdf forms in LiveCycle Designer ES?
How can i do it?

Each object has its own settings for font. You can set the object to the font that you want and then drag it back onto the palette. It will ask you to overwrite the current one. As you drag the object back into the drawing area the new font will be used. This is true aof all properties of the object and not just font.
This is useful if you are creating a new form, but if one already exists then the easiest way is to open the XML source (right mouse click on the Design tab and choose XML source. Use the search facility to find all occurances of typeface and chnage each one to the font that you want. Save the XML and then all objects will have the same font.
Make sure that you make a backup of th eform before you play with the XML. There is no undo once the cahnges are committed.

Mass upload for info records when price gets changes

Dear All,
How to do Mass upload for info records when price gets change.
Regards,
Bhargav

Hi Bhargav,
Please upload the present price (Map) by LSMW . When you are doing the transactions then automatically by selecting option info update price will be updated the info record in Order Price history
Regards
M B Raju

Getting an error message that unable to check for software update when trying to download new iOS 8.0.2 update ?? Can someone help ???

Getting an error message of unable to
check for software update when trying to update to
ios 8.0.2. Can someone help ??

Howdy there otss1979,
It sounds like you are unable to download the iOS 8.0.2 update either, over the air, or using iTunes. If you are updating the software on your phone in Settings > General > software update I would recommend starting with this article:
Resolve issues with an over-the-air iOS update
If you are using iTunes, I would use this article instead:
Resolve iOS update and restore errors in iTunes
If you are getting a specific error number, the following article will help you get that resolved:
Resolve iOS update and restore errors
If this does not resolve the issue, could you please write the error message you are getting word for word for me?
Thank you for using Apple Support Communities.
All the best,
Sterling

Too many fields QE-3018 when trying to change manager password

Hello, we are seting up a new database, we have uploaded tables with data transfer and copy express, and when trying to change the manager password we are getting this message.
thank you.
Jose.

Hi,
Check the below note 1304754:
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1304754|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1304754]
Warmest Regards,
Chinho

Changed fonts for entire system when trying to change mplayer fonts

Similar Messages

Maybe you are looking for