Changed from dial up to high speed

The area I live in finally has high speed (wireless), so I have a new ISP and broadband connection. Also Internet Exlporer was acting up so I now am using Firefox.
If I put in a new cd to download to my ipod (5th gen.) I get...unable to connect to the CDDB server. Network connection timed out. I called my ISP and all is ok. also can't buy any tunes. In frustration I've downloaded itunes again with my new user name. This page had my old user name. I've flushed the DNS settings in widows. I've spent hours yesterday trying to get this, which must be a simple thing, to work and came within an eyelash of putting my fist through the monitor!
I tried calling the help line with it's push 1 for this and 3 for that and on and on, what a joke, got nowhere.
Does anyone know it this is firefox, or something not set correctly, and how to set it, or what the heck is the problem?

Is this the error?
Disk cannot be read from or written to error syncing iPod in iTunes.

Similar Messages

How do i change the http setting to high speed

how do i change the http setting to high speed ???

Are you experiencing problems with a slow connection in Firefox?
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Another possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, maybe after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Firewalls]] and http://kb.mozillazine.org/Firewalls

Can I convert an old IMAC computer with OS 9 operating system from being "dial up" to high speed?

Can anyone tell me how I can convert my old IMAC from "dial up" to go on the internet as high speed? I have an ISP provider for a more modern computer that I own, but I really would like to use my old IMAC on the internet as well? How can I make it compatible with high speed internet? If I try to go on line, the internal modem "dials up". How can I change that and cause it to communicate with my external high speed modem?

Any iMac can connect by ethernet to the router.
You'll need to disable the modem and set up the network config.
Too long since I used OS9 to guide you on that bit; ask in the correct forum;
https://discussions.apple.com/community/mac_os/classic_mac_os or;
https://discussions.apple.com/community/desktop_computers/imac_powerpc

How do I correct the arrow keys to change from lower case to higher case

The arrow , shift key, will not allow me to change from upper to lower case letters when in I Tunes. the arrow keys seem to work in every other application. I cannot properly enter a password to enter I Tunes. I reset the password from my note book and the password works. only the I pad and I tunes are giving me fits.
charliecache

the pop-up box comes up just as you said. i then type in the corrected artist's name. i click 'ok', expecting the updated info to appear on the main iTunes library list
As you have discovered, changing the info on the CD after you have RIP'd it will not change any of teh songs you RIP'd.
If you select the CD in iTunes and update the info before you RIP the songs, they will go into iTunes with this new info.
In addition, the CD will display this info if/when you reinsert it into this computer.
If you only change the RIP'd songs in iTunes, they will display the updated info but if you reinsert the CD, it will display the previous info.
Best way to do it is to rename the files on the CD before you RIP.

In a change from Dial-up to Broadband, can I upgrade Mozilla add ons on Foxfire 3.6.28 in 10.4.11 operating system so I can watch videos?

I have a Mac mentor who gave me an old iBook out of the kindness of her heart and I've enjoyed using it very much. I can't afford to buy a new laptop.
I just changed to Broadband so I can get faster reception and watch videos and listen to audios on the Net. I want to copy videos from Utube, but I don't get continuous reception, but only longer segments than before with a jerk in between. There is a notice in the upper right hand corner of the screen that asks me to upgrade plug ins, but I fear that my 10.4.11 operating system will not support the upgrade. Do I have to and can I upgrade my operating system on an old iBook that was conceived in the early stages of Mac laptops or can I just upgrade the plug ins that I have? I'm afraid to change what is there. Can someone help me do this myself without bothering my busy mentor with something that I ought to be able to do myself?

''Merla wrote:''
can I just upgrade the plug ins that I have?
You can update Flash Player to 10.1.102.64, which is the last version that works on your system. This should be sufficient for most sites.
* [http://forums.adobe.com/thread/857425 Flash Player for Mac PowerPC | Adobe Community]
You can use the Video DownloadHelper add-on to save videos from sites like YouTube.
* https://addons.mozilla.org/firefox/addon/video-downloadhelper/
''Merla wrote:''
Do I have to and can I upgrade my operating system on an old iBook
If that's the computer you used to ask the question, then no. It has a PowerPC processor. To run the latest version of Firefox, you need at least Mac OS X 10.6, which in turn requires an Intel processor ([http://support.apple.com/kb/SP575 see system requirements for Mac OS X 10.6]).
Note that your operating system, browser and plug-ins, all contain security vulnerabilities that put your computer at risk. You can switch your browser to TenFourFox, an up-to-date third-party build of Firefox that runs on Mac OS X 10.4 and 10.5 on PPC processors. However, it doesn't support plug-ins (like Flash Player).
* http://www.floodgap.com/software/tenfourfox/

How can I get the Firefox browser to work with my high speed internet?

After switching from dial-up to high speed internet, I can no longer open the Firefox browser (which I was using) even after downloading the latest version. It is set for my default, but I can only use IE to browse. What else do I need to do to make it work?

You didn't tell me it was a user name password issue.
Open Keychain Access. (Applications/Utilities)
Select Passwords on the left.
Delete the Delta keychain.
Now from your Safari menu bar click Safari / Preferences then select the Autofill tab. Make sure: User names and passwords is selected.
Navigate to the Delta site. Login with your user name and password. You should be prompted to save that info to a new keychain.

I changed from a dial up to a high speed network and can no longer get Firefox to work as my browser. What do I need to do?

I changed from a dial up to a high speed network and can no longer get Firefox to work as my browser. What can I do.
I did try to download Firefox again, but still will not work.

Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

Does anyone know of an excellerator that I can down load to speed up my entire internet connection. I have dial up from windstream,i live in middle of no-where,KY and dont have access to high-speed intewrnet here, PLEASE HELP.

My internet connection is very slow dial up thru windstream and they dont offer high speed where i live and neither does anyone except Hughes Net,but they are way to expensive. Not an option for me at this time. I used to have dial-up thru southeast telephone and they gave me an excellerator that sped up everything.

Thanks for taking the time to respond to my question. No windstream doesnt offer that,i asked and they have no intention to do that in the near future. They plan on offering highspeed to everyone in the future,but as of now they dont offer it in my area and have no plans of replacing the phone lines in my area anytime soon either. so until they replace the lines in my area,its not available . I am glad you told me that i cant add it ...Doug

I live in the country and there is no High speed available, How does Firefox for desk top work with Dial up ???

I live in the country and there is no High speed available, How does Firefox for desk top work with Dial up ??? I have a great dell computer, Dimention 8400. Before I install firefox I want to know for no waste of time for either party..

Unless you enabled Find My iPad on it before it was stolen then there isn't any way to locate it. If you did enable it then you could try locating it either via http://icloud.com on a computer or Find My iPhone on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it.
If it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.
If it was never registered to your account then it won't appear on your support profile : https://supportprofile.apple.com/
The only other ways to find it that I know of (apart from on the actual device) are via the packaging, the backup on a computer's iTunes : http://support.apple.com/kb/HT4061

I have one application that has requirement to do low and high speed acquisition. I want to change sample rate while running. BUT... I have E series Device

I am writing control software for a process that is usually dull and
requires only 10 Hz acquisition rate. At particular times during
the sequence, however, we are interested in looking at a couple of
channels at 1000 Hz. My approach so far is to configure my
Buffered DAQ to run at the higher rate at all times. When we are
in the 'high-speed DAQ' mode, the program logs every point to
disk. In the 'low-speed' mode, I am picking off every nth (in
this case, 10th) point to log to disk. At all times, I update my
GUI indicators on the front panel at a maximum of 4 times per second (I
find that anything faster results in an uncomfortable display), so I
fill up a FIFO with data in my acquisition / logging loop, and read the
FIFO in the display loop. The data in my GUI display can be up to
250 milliseconds off, but I find this acceptable . As a side note, I
need buffered Daq with hardware timing, as software timing results in
lost data at 1000 Hz.
This all works fine and dandy, but I am convinced that it is not the
most elegant solution in the world. Has anyone developed a
buffered DAQ loop where the scan rate can be adjusted during
operation? I would like to change the rate of the E-Series card
rather than relying on down-sampling as I am now doing.
The reason I have concern is that at the moment I am simulating my AI
using MAX and when running the down-sampling routine, I consistently
miss a particular event on the simulated data becuase the event in
question on the simulated data always occurs at the same 'time', and I
always miss it. Granted, while it is unlikely that my measured
signal and my acquisition are perfectly synchronized in the real world,
this particular situation points out the weakness in my approach.
More than anything, I am looking for ideas from the community to see
how other people have solved similar problems, and to have you guys
either tear apart my approach or tell me it is 'ok'. What do you
think?
Wes Ramm, Cyth UK
CLD, CPLI

Adding to Alan's answer:
One of the problems that comes with these tricks for variable-rate acquisition is being able to match up sample data with the time that it was sampled.
If you weren't using either of E-series board's counters, there is a nifty solution to this! You'll be using 1 of the counters to generate the variable-rate sampling clock. You can then use the 2nd counter to perform a buffered period measurement on the output of the 1st counter. This gives you a hw-timed measurement of every sampling interval. You would need to keep track of a cumulative sum of these periods to generate a hw-accurate timestamp value for each sample.
Note: the very first buffered period measurement is the time from starting the 2nd counter until the first active edge from the 1st. For your app, you should ignore it.
-Kevin P.

Help! data manipulation for high speed streaming to disk from multiple boards and multiple channels

I am using Labview 7.1 and have been trying to capture data from 12 channels simutaneously sampled at 2MS/s each and streaming to disk for up to a minute or more. The hardware I am using is 2 x PXI 6133 S series boards with a MXI4 link to a Pentium D 2.8 Ghz machine with 2Gb ram. I have 2 sata drives set up in a raid 0 configuration which should give me hard disk write speed faster or equal to the MXI-4 transfer speed.
I have first started off by using the example code "multi device sync - analog input- cont acquisition" which has enabled me to sync the two boards and sample at the required speed.
To stream the data to disk, I have first merged the data from each board together to save it to one file. I have tried using the storage vi's but I end up with a Daqmx read error (trying to read data that is no longer available). I have played around with the read data size to the point that I either get a insufficient memory error, or I get the "trying to read data that is no longer available" error. I have also tried using the file IO blocks with some success and have found that I have been able to stream to disk only if I configure the daqmx read block to output the data in "raw 1D I16" format and plugging it into the file-write block. In doing this, I have noticed that using multiple channels on one daqmx read task, I will get all the channels in one 1D array rather than a 2D array organized by channels. This makes it messy to read at the end of this, and I also don't want to write another vi to separate the channels, due to the high chance of getting the data mixed or messed up if I happen to change the number of channels on a board
Is there a cleaner way of streaming this data to disk and keeping the channel data separated from each other?, and/or is there a better way to capture and handle the data I need?
I have attached the vi which I have got to consistantly work streaming to disk using the raw 1D I16 format.
Thanks in advance to anyone who can help.
Attachments:
multidevicesync_analoginput_streamtodisk.vi ‏197 KB

Hi,
i can suggest following
Refer to an example VI called as "High speed data logger.VI" in conjunction with "High Speed data logger reader.vi" in Labview examples. Alhrough the logger might be in Tradiditional Daq format, it can be quite easily converted to Daq Mx format to store data in Binary (I32 format) . I have used this for many of my applications and i have found that the data retrieved does not have any "messups".
Why not keep a seperate file for each card? This way, you do not have to load your application with extra process. You only have to acquire and save. After saving in Binbary format, you can retrive it offline, convert it to ascii format and merge the data files of various cards to get one consolidated ascii data file.
hope this helps
Regards
Dev

VERIZON CHANGED HIGH SPEED DSL AT CENTRAL OFFICE AFTER I HAD 7.840 MBPS FOR MORE THAN 10 MONTHS!!!

ALL OF THE SUDDEN VERIZON DECIDES IN LATE APRIL THAT I SHOULD HAVE 7.1 MBPS INSTEAD OF THE 7.840 MBPS I HAVE BEEN HAVING FOR MORE THAN 10 MONTHS. AS A MATTER OF FACT, AFTER A LOT OF DISCONNECTIONS SUFFERED IN MARCH/APRIL 2012 BECAUSE VERIZON WAS DOING SOMETHING IN THEIR CENTRAL OFFICE WITHOUT TELLING TO THEIR CUSTOMERS, AND HAVING TO REPLACE ALL OF THE DSL FILTERS, AND TWO MODEMS... I GOT THE D-LINK WORKING AT 7.840 MBPS. AS A MATTER OF FACT, VERIZON TECHNICIAN CAME TO MY HOME AND WE DID INSTALL THE NEW MODEM AT THAT VERY SPEED, WHICH WAS AGREED MORE THAN 1 YEAR AGO AFTER DOING A LOT OF TESTING TO ENSURE THE STABILITY IN THE CONNECTION. ALL OF THE SUDDEN, AFTER THE 20-DAY HONEYMOON WITH MY NEW MODEM, I NOTICED THAT MY SPEED WAS NOT THE SAME, AND FOUND OUT THAT THE IP WAS CHANGED AND THE SPEED SETTING DROPPED TO 7.1 MBPS. NOW VERIZON CLAIMS THAT MY CONTRACT WAS FOR A MAXIMUM OF 7.1 MBPS WHICH IS NOT TRUE BECAUSE I WAS IN THE 7-15 MBPS RANGE!!! AS A MATTER OF FACT I COULD GO EVEN OVER 8 MBPS BUT BECAUSE OF MY LOCATION, RELATIVELY FAR AWAY FROM THE CENTRAL OFFICE AND AFTER A LOT OF TESTING, 7.840 MBPS WAS THE MOST CONVENIENT SPEED. VERIZON CHANGES THEIR POLICIES NOT NOTIFYING THE CUSTOMERS, THEY DO WORK INTERRUPTING THE SERVICE WITHOUT NOTIFYING. I AM GOING TO WAIT AND SEE WHAT THEY DO IN THIS CASE. IF THIS IS NOT SOLVED PROPERLY... GOOD BYE VERIZON, AND HELLO TIME WARNER CABLE!!! SO, VERIZON BE PREPARED TO LOSE ANOTHER LOYAL CUSTOMER FOR MORE THAN 9 YEARS!!! THAT IS THE PROBLEM WITH VERIZON, THEY ARE SO DEDICATED TO GET NEW CUSTOMERS THAT FORGET ABOUT THEIR OLD LOYAL ONES... UNFORTUNATELY, THERE ARE CONSEQUENCES... AND THOSE ARE THAT YOU WILL LOSE THE OLD ONES SOON BECAUSE YOUR LACK OF CARE ABOUT THEM!!! ONCE YOU ARE HOOKED WITH VERIZON, THEY THINK THEY GOTCHA FOREVER... LET'S WAIT AND SEE...

Believe or not... That 20% does make a difference... In one of my games, I used to have 5.3 secs of response time, now it does not lower from 7.8. By the way, even my PC worked faster when I had that little higher speed... I know the changes were done without my knowledge because for a period of 2 weeks I got lot of unstability in my connection that I never got for years before... After 20 days with the first IP assigned to the new modem, the speed dropped like Verizon was running a program to levelize such an speed.
At the end, what really bothers me, is that the 7.840 Mbps was a speed agreed with Verizon, their technicians, their supervisors at the CO, and it was fully documented, and all of the sudden because an "internal change in their policies" that agreement was broken... I am currently making arrangements to have FIOS installed at home, subject to an scouting visit from Verizon to evaluate the feasibility of its installation according to my internal wiring limitations. I have to give them a try... No doubt that it would me cheaper and much faster than the high speed enhanced internet connection that I currently have. Let's wait and see...
Thank you for your interest in my case and observations made too.

Hourly disconnects from High Speed Internet Enhanced

Hello all, I have verizon high speed internet enhanced and have not had any problems at all with the internet since I had a verizon tech. install it. However, since 4 days ago my actiontec GT740 WGB router has been constantly disconnecting from the internet on an hourly basis. It happens up to 5 times an hour, with the disconnectiong lasting about 10-15 seconds. Now, this may not provide much of a problem, but I bought the internet basicly for my xbox 360. I cannot complete full games online versus other players because of these interuptions 'causes me to lose connection and ultimately lose the game.
Verizon HSI Enhanced download - 10.1mbps
Verizon HSI Enhanced upload - 0.8mbps
I have only had my verizon for a few weeks now, but up until now it has been working extremely well. I'm a bit disappointed now, because I have read and heard of this problem, and was hoping not to encounter it.

Hello,
When you notice the disconnect, are the router lights turned off? Outside of playing games on the XBOX does your computer lose a connection as well?
Please send me a private message if you still need assistance.
Shamika_Vz
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

How can I stop spam from someone called AT&T High Speed Internet? I do not know what the email address is.

I am receiving 100's of spam emails. They are all advertising different types of products but they all say they are from AT&T High Speed Internet. I have used the junk filter on them but it does not pick them up as junk. I have to do it manually each time. I have contacted my UVerse provider and they cannot assist because it is getting through Yahoo to Thunderbird. They say that it is a problem that I will have to have assistance from Thunderbird to resolve so that I can have this listed as junk and will not have to do this manually. I am at my wit's end. Please, please help me!

Yahoo has its own junk mail filter (Spamguard), which you should confirm is enabled:
* [https://help.yahoo.com/kb/mail/stop-spam-yahoo-mail-sln3227.html Mail Help | - SLN3227 - Stop spam in Yahoo Mail]
The significance of this is that marking messages as junk in Thunderbird probably isn't integrated with Yahoo's system, so Yahoo may not be getting trained to block them. You might need to go into Yahoo from time to time and mark accumulated junk as spam.
Separately, there are solutions for filtering spam on your computer as the mail is downloaded from Yahoo. Thunderbird has a built-in filter, as described here: [[Thunderbird and Junk / Spam Messages]]. However, if that isn't as effective you would like, there are third party products as well.

Mac OSX 10.6.8 Garage Band '11. This error happens occasionally : I am forced to power-off-on. Pop-up states that error info will be sent to apple. I never hear back from apple. Second prob: Fan sometimes comes on, runs high speed, then slowly stops.

Garage Band '11: pop-up error forces me to power off-on. Message states that info will be sent to Apple.
I never hear back from anyone about this.
Second prob: Fan sometimes comes on, runs high speed, then slowly runs down and stops running.

First thing to do is a SMC Reset, you can find instructions at:
http://support.apple.com/kb/HT3964
READ THE INSTRUCTIONS CAREFULLY!!!!
Then try Repairing Disk Permissions, do this at least 2x. You will find this in Disk Utility which is located in Applications - Utilities - Disk Utility.
Finally you may need to uninstall Garage Band and reinstall. You may have to use Pacifist to do this, you can find it at:
http://www.macupdate.com/app/mac/6812/pacifist

Changed from dial up to high speed

Similar Messages

Maybe you are looking for