Changed FSB speed - PC won't start

Hello all,
I've got a K7N2 Delta with a AMD XP 2700+. I've had it for over a month and it's worked great but I started tinkering with the FSB speed and bumped it up from 133 to 200mhz and then set the other "advanced CMOS" settings on "high performance"
Now, when I start the PC I hear the power run through all devices but get no display and the D bracket shows the "processor damaged or not installed warning" - top 2 LED's are red.
I've unplugged/reset the processor but what else can I do to reset the BIOS? I cannot get to anything on the computer the display is blank from startup. I get no responce from CTRL+HOME either.
PLease please please advise! I'm at rek410 - at - hotmail too.

Great
Thnx

Similar Messages

I have to change my disk, computer won't start. How much should I expect to pay?

Hi!
My computer has a grey screen and won't start. I called Apple and I was told my disk was broken and needed to be repaired. Is it true? How much does it cost?

It could be true - but if I were you I would take the machine to an Apple Store or an AASP to get a free diagnosis and estimate for repair. No one here has any real idea of how much a hard drive replacement would actually cost, either.
Take your computer in and get a real diagnosis. Don't rely on a phone conversation - you really can't do diagnosis on the phone.
Good luck,
Clinton

MacBook Pro won't start after changing access rights

I did something very wrong. Unfortunately I changed the access rights of Macintosh HD for "everyone" to none.
Result, my MacBook Pro won't start anymore.
Already tried the installation disk, reset password for root and users. No result.
Help program "check acces rigths". Didn't work either.
How do I reset the access rights of Macintosh HD?

https://discussions.apple.com/docs/DOC-2240
The first solution is what you're looking for.

Concurrent Managers won't start after changing Apps password

11.5.10.2 E-Business suite on Windows Server 2003 SP2
Concurrent Managers were working fine after install.
I have changed the Apps password using FNDCPASS and have run AutoConfig successfully on both the database and applications tiers.
Copncurrent Managers won't start. ICM starts but not the others.
I tried setting the profile GSM Enabled to No but to no avail.
Any help greatly appreciated.
Thanks,
Bartoosh

hi
may be you can try this,this might be not the same case as yours ,but it worked for me,so may be you can give a try.
Concurrent manger-standard manager inactive

Computer won't start up after changing permissions.

I accidentally changed the permissions for all of the files on my hard drive. Now, Leopard won't start up. And to top it all off I conveniently can not find my Leopard disk. I did, however, locate my Tiger disk but the computer won't start from the CD drive either.
I also thought that I could install Tiger on an external Hard Drive using my sisters computer but Tiger would not install on the USB Hard Drive because it said Mac OS X could not start from the external hard drive.
It won't start up in "Safe Mode (holding the SHIFT key)".
Anybody have any suggestions?

You can, in addition to Barry's excellent suggestions, reset the SMU.

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My iMac G5 won't start up.

My iMac G5 won't start up, and I don't know why. Before I had this problem, my iMac was working fine, but slower than my expectations. So, I decided to reinstall Mac OS with the erase and install option, and the installation went ok. When I turn on my iMac, I usually see a brief glimpse of a light gray screen, which changes to the white screen, and then shows the Apple logo and the spinning indicator. Now however, whenever I press the power button of my iMac, it doesn't get past the light gray screen. I hear a chime, and it changes to the light gray screen, but it never gets to the white screen with the Apple logo and the spinning indicator. If I leave the computer on at the gray screen, after a while, the fans start to spin at full speed. I didn't know what to do, so I tried to turn it on while pressing option. It kept searching for my operating system, but it never found anything, the watch indicator kept spinning and spinning and never stopped. So next, I tried to reinstall my operating system with the archive and install method. It worked, but after my computer went to sleep, it got frozen when I woke it up and the colored disk kept spinning at the password request screen (requests password when I inturrupt the screensaver or sleep).
My questions are:
1. What is the problem, and what can I do to solve it?
2. Could my computer be affected with the problem at: http://www.apple.com/support/imac/repairextensionprogram/ (my serial number is in the range that Apple said that is effected)
3. I have not reset the SMU. Should I try that?
Thanks!

Here's what I did. (bold text represents what the computer did after what I did)
1) I opened the back cover.
2) I plugged in the power cord.
The first green light went ON
3) I pushed the top internal button (internal power button).
Lights 2 and 3 went ON.
4) Even though the lights went on, which means that everything is fine, I still pressed the bottom internal button (reset SMU)
The computer stopped everything. Fans stopped, the computer turned off, etc.
5) I don't know if I did it right, so I put the back cover back on my iMac, and pressed the external Power Button.
The computer still has the same problem.
What should I do? First call Apple Care and then take my Mac to the Apple Store to repair?
Thanks again!

[SOLVED] Audacious won't start

audacious
WARNING: Audacious seems to be already running but is not responding.
(audacious:1810): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1810): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(audacious:1810): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1810): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(bootstrap.c:60) [mowgli_init]: mowgli_init() is a deprecated function, provided only for backwards compatibility with Mowgli-1. You should remove it if you no longer support using Mowgli-1.
[1] 1810 segmentation fault (core dumped) audacious
Audacious is not running, or it's not in the process list.
The GTK errors surely won't start it from running, as other GTK apps display that but they still work too. Seems something is going wrong with mowgli, which I have reinstalled.
Just rebooted and tried again, now it's an abort error not a segfault:
audacious
WARNING: Audacious seems to be already running but is not responding.
(audacious:786): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:786): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(audacious:786): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:786): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(bootstrap.c:60) [mowgli_init]: mowgli_init() is a deprecated function, provided only for backwards compatibility with Mowgli-1. You should remove it if you no longer support using Mowgli-1.
GLib-GObject:ERROR:gtype.c:1991:type_iface_vtable_base_init_Wm: assertion failed: (iface->data && entry && entry->vtable == NULL && iholder && iholder->info)
[1] 786 abort (core dumped) audacious
EDIT: Now this is getting weird. I have steam on my PC, and I went and played TF2 for a few minutes, took a screenshot, then exited the game. I'm now getting the audacious errors in STEAM's console output. WHAT.
SDL video target is 'x11'
SDL video target is 'x11'
SDL failed to create GL compatibility profile (whichProfile=0!
This system supports the OpenGL extension GL_EXT_framebuffer_object.
This system supports the OpenGL extension GL_EXT_framebuffer_blit.
This system supports the OpenGL extension GL_EXT_framebuffer_multisample.
This system DOES NOT support the OpenGL extension GL_APPLE_fence.
This system supports the OpenGL extension GL_NV_fence.
This system supports the OpenGL extension GL_ARB_sync.
This system supports the OpenGL extension GL_EXT_draw_buffers2.
This system supports the OpenGL extension GL_EXT_bindable_uniform.
This system DOES NOT support the OpenGL extension GL_APPLE_flush_buffer_range.
This system supports the OpenGL extension GL_ARB_map_buffer_range.
This system supports the OpenGL extension GL_ARB_vertex_buffer_object.
This system supports the OpenGL extension GL_ARB_occlusion_query.
This system DOES NOT support the OpenGL extension GL_APPLE_texture_range.
This system DOES NOT support the OpenGL extension GL_APPLE_client_storage.
This system DOES NOT support the OpenGL extension GL_ARB_uniform_buffer.
This system supports the OpenGL extension GL_ARB_vertex_array_bgra.
This system supports the OpenGL extension GL_EXT_vertex_array_bgra.
This system supports the OpenGL extension GL_ARB_framebuffer_object.
This system DOES NOT support the OpenGL extension GL_GREMEDY_string_marker.
This system supports the OpenGL extension GL_ARB_debug_output.
This system supports the OpenGL extension GL_EXT_direct_state_access.
This system DOES NOT support the OpenGL extension GL_NV_bindless_texture.
This system DOES NOT support the OpenGL extension GL_AMD_pinned_memory.
This system supports the OpenGL extension GL_EXT_framebuffer_multisample_blit_scaled.
This system supports the OpenGL extension GL_EXT_texture_sRGB_decode.
This system supports the OpenGL extension GL_NVX_gpu_memory_info.
This system DOES NOT support the OpenGL extension GL_ATI_meminfo.
This system supports the OpenGL extension GL_EXT_texture_compression_s3tc.
This system supports the OpenGL extension GLX_EXT_swap_control_tear.
GL_NV_bindless_texture: DISABLED
GL_AMD_pinned_memory: DISABLED
GL_EXT_texture_sRGB_decode: AVAILABLE
Installing breakpad exception handler for appid(gameoverlayui)/version(20121214145418_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
[1219/184327:WARNING:proxy_service.cc(646)] PAC support disabled because there is no system implementation
Using breakpad crash handler
Setting breakpad minidump AppID = 440
Forcing breakpad minidump interfaces to load
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Installing breakpad exception handler for appid(440)/version(5148_client)
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Steam_SetMinidumpSteamID: Caching Steam ID: 76561197989209372 [API loaded yes]
Steam_SetMinidumpSteamID: Setting Steam ID: 76561197989209372
ConVarRef m_rawinput doesn't point to an existing ConVar
GL_NVX_gpu_memory_info: AVAILABLE
GL_ATI_meminfo: UNAVAILABLE
GL_NVX_gpu_memory_info: Total Dedicated: 1047872, Total Avail: 1048576, Current Avail: 838248
GL_MAX_SAMPLES_EXT: 32
(process:1091): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
[1219/184328:ERROR:resource_bundle.cc(411)] Failed to load /media/F/steam4linux/Steam/SteamApps/briandam8/Team Fortress 2/cef_gtk.pak
Some features may not be available.
[1219/184328:WARNING:proxy_service.cc(646)] PAC support disabled because there is no system implementation
CShaderDeviceMgrBase::GetRecommendedConfigurationInfo: CPU speed: 3701 MHz, Processor: GenuineIntel
GlobalMemoryStatus: 4294967295
CShaderDeviceMgrBase::GetRecommendedConfigurationInfo: CPU speed: 3701 MHz, Processor: GenuineIntel
GlobalMemoryStatus: 4294967295
IDirect3DDevice9::Create: BackBufWidth: 1920, BackBufHeight: 1080, D3DFMT: 3, BackBufCount: 1, MultisampleType: 0, MultisampleQuality: 0
Loaded program cache file "glbaseshaders.cfg", total keyvalues: 266, total successfully linked: 266
Loaded program cache file "glshaders.cfg", total keyvalues: 596, total successfully linked: 596
Precache: Took 4507 ms, Vertex 1000, Pixel 2124
Game.so loaded for "Team Fortress"
Installing breakpad exception handler for appid(hl2_linux)/version(1.0_client)
Installing breakpad exception handler for appid(hl2_linux)/version(1.0_client)
Game update: AppID 440 "Team Fortress 2", ProcID 1091, IP 196.38.180.26:27015
warning: Unknown nb_ctl request: 4
warning: Unknown nb_ctl request: 4
warning: Unknown nb_ctl request: 4
warning: Unknown nb_ctl request: 4
warning: Unknown nb_ctl request: 4
warning: Unknown nb_ctl request: 4
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Installing breakpad exception handler for appid(steam)/version(1355789024_client)
Installing breakpad exception handler for appid(steam)/version(1355789024_client)
Game removed: AppID 440 "Team Fortress 2", ProcID 1091
saving roaming config store to 'sharedconfig.vdf'
roaming config store 2 saved successfully
WARNING: Audacious seems to be already running but is not responding.
(audacious:1163): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1163): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(audacious:1163): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1163): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(bootstrap.c:60) [mowgli_init]: mowgli_init() is a deprecated function, provided only for backwards compatibility with Mowgli-1. You should remove it if you no longer support using Mowgli-1.
GLib-GObject:ERROR:gtype.c:1991:type_iface_vtable_base_init_Wm: assertion failed: (iface->data && entry && entry->vtable == NULL && iholder && iholder->info)
WARNING: Audacious seems to be already running but is not responding.
(audacious:1181): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1181): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(audacious:1181): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1181): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(bootstrap.c:60) [mowgli_init]: mowgli_init() is a deprecated function, provided only for backwards compatibility with Mowgli-1. You should remove it if you no longer support using Mowgli-1.
GLib-GObject:ERROR:gtype.c:1991:type_iface_vtable_base_init_Wm: assertion failed: (iface->data && entry && entry->vtable == NULL && iholder && iholder->info)
WARNING: Audacious seems to be already running but is not responding.
(audacious:1198): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1198): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(audacious:1198): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1198): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(bootstrap.c:60) [mowgli_init]: mowgli_init() is a deprecated function, provided only for backwards compatibility with Mowgli-1. You should remove it if you no longer support using Mowgli-1.
GLib-GObject:ERROR:gtype.c:1991:type_iface_vtable_base_init_Wm: assertion failed: (iface->data && entry && entry->vtable == NULL && iholder && iholder->info)
WARNING: Audacious seems to be already running but is not responding.
(audacious:1215): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1215): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(audacious:1215): Gtk-CRITICAL **: _gtk_css_section_to_string: assertion `section != NULL' failed
** (audacious:1215): WARNING **: Can't load fallback CSS resource: (null)Failed to import: The resource at '/org/gnome/adwaita/gtk-fallback.css' does not exist
(bootstrap.c:60) [mowgli_init]: mowgli_init() is a deprecated function, provided only for backwards compatibility with Mowgli-1. You should remove it if you no longer support using Mowgli-1.
GLib-GObject:ERROR:gtype.c:1991:type_iface_vtable_base_init_Wm: assertion failed: (iface->data && entry && entry->vtable == NULL && iholder && iholder->info)
It seems to display that error every time I click the "Show on disk" button on the screenshot manager.
Something is very broken.
Last edited by biltong (2012-12-19 18:39:49)

Well changing back to my normal theme after starting audacious works. So that's a plus. I still don't get how it affected steam.
Or reinstalling it worked, because now Audacious is starting fine with my normal theme. This is really strange.
Okay I figured out why the errors were showing up in steam. For some reason, steam tries to open audacious as my file manager instead of nemo.
Last edited by biltong (2012-12-19 18:39:33)

How do you change the speed of a detached audio clip?

I have a piece of detached audio. Video Frame rate is 23.98. The piece of Video above it is Video Frame Rate 24.
How do I change the speed of this detached audio clip?

Nope, the Automatic Speed did not work. I exported the XML, and then ran it through X2Pro to try and get my AAF, and it still spits out conform warnings/errors on those same spots. Automatic Speed apparently did nothing helpful to my situation. (Can Anyone explain Automatic Speed?)
Will have to try going through Cinema Tools per the similar issues noted in this conversation: http://forums.creativecow.net/thread/344/28007
Curious to see what FCPX would do with this media, importing the 24p file to a 25 Project cause a noticeable shift in both time and pitch.
I imported the time coded audio separately, and played it against the obviously speed and pitched changed video with embedded audio. The files did not sync.
The audio remained in time and pitch, while the video didn't. So the audio tc doesn't seem to effect playback in FCPX, but video definitely does, and it seems rather buggy.
So, if your video is 24.0 and your audio is 23.98 and you are in a 23.98 timeline, FCPX might be changing the speed of the video without really reporting it. Resetting speed doesn't do anything, hitting "automatic speed" screws it up a bit more (it goes the wrong way). Changing the speed to something like 96% (FCPX reports 96% but I know it's really ((24000/1001)/25) which is just short of 96%. Turning off the "preserve pitch" checkbox actually pitched the audio back to normal.
I didn't create the 24.0 vs 23.9 media that you have, but perhaps you are having similar issues, or a different combination/permutation therein.
But to answer your question, the time coded audio was not changed, only embedded audio.
and
But here some notes which makes things hopefully clearer.
Resampling and changing playback speed are two totally different things.
Samplerate for audio is the same as fps for video (not dpi for video) so let's call it sps.
You can record audio at any sampling rate. But let's take 48 kHz and 32 kHz here.
Record 60 seconds. Once recorded both files as stand alone files will play 60 seconds.
But forced to play back in a NLE timeline with a fixed sps of 48 the first file will playback correctly. The second one will play at 2/3 of the time (32/48). The other way round the 48 sps file will play longer in a 32 sps timeline.
Now for those poor guys who have to work with NTSC:
A real world second is not a second in NTSC video world. Its 1001/1000 seconds.
So selecting a 48k sps audio preset in a timeline preset means that a real world audio of 60 seconds is only 1000/1001x60. That means that those 60 seconds are only 59.94 seconds long. Its too short.
One way - if you stay strictly in NTSC - is to record audio with 48048 Hz. This way a real world 1 second audio will match a 1 second NTSC video.
Next option with BWAVE files is to change the playback settings in the BEXT header of the file. This won't resample the file!!!
Now about the TC. BWAVE doesn't have a TC in a way you're used when handling video. It has a timestamp in the header. This timestamp contains the Samples after Midnight. Based on that the NLE will convert this to TC which can be displayed. So in NTSC world this might give a wrong interpretation.
For example if you have a "Start TC" of 00:10:00:00 (thats what you see on your audio recorder) it means that using 48kHz the timestamp is at 600x48,000 = 28,800,000 samples. Since the real sampling rate in the timeline though is 48048 Hz you have to divide the source stamp by this number. This results in 9.99000999000999 minutes. So for a 23.976 fps project this is a TC of 00:09:59:10.
So setting the Bext header and/or iXML chunk to the correct playback speed will keep everything intact. Again this is without resampling!
Using an AIFF there aren't these options.
So you can edit all the stuff without resampling when using BWAVE. But resampling will happen when you export a final movie.

Classic won't start, can't upgrade, and other problems...

There's something not quite right with my Mac, and I can't quite pinpoint it. Because of this, I'm not even certain I'm posting this in the right forum! Here's the situation:
I have a PowerMac G4, upgraded with a an extra hard drive, an ATI Radeon Pro graphics card, a Sonnet Duet G4 Dual 1.8GHz processor, and (as of today, prior to this 10.4.7) am running OSX 10.4.8.
When I got the machine, it came with OS 9.1 installed. I later upgraded to 9.2.2, and then eventually to OSX. My Classic system folder stayed at 9.2.2
About 10 days ago I installed the Sonnet processor upgrade. In order to do so, I had to rejig my system a bit, as the installer for the upgrade only works in 9.2 and not Classic (yeah, bad call on Sonnet's part).
I partitioned my Back-Up drive, and installed 9.2 on it, installed the software for the processor, and then the processor itself. After checking everything worked, I then unpartitioned my Back-Up drive and removed OS9.2.
Although the processor works fine, and has doubled the speed of most tasks, ever since it was installed, I have been prone to crashes. Most often when working with large files in various applications such as Photoshop.
Also, Classic won't start now. I hardly ever use Classic these days, only for one or two tiny programs I could live without, but the fact that it refuses to start is niggling me. I reinstalled OS9.1 from my original disk, and now I can't upgrade to 9.2: all that happens is I get a message saying that I have 9.1 and that it is recommended I upgrade to 9.2! But Classic won't open, so I can't upgrade to 9.2.
The next thing that's started happening is that my broadband connection keeps dropping. This never happened before. This is happening so frequently it's really annoying; the only thing that cures it is a restart, but restarting 10 times a day isn't funny. I'm using an Alcatel Speedtouch ADSL modem. This has worked fine for over a year.
Yesterday I tried setting up a wireless connection with a Belkin router, replacing my USB modem, so my wife can use her Windows laptop to surf from the same broadband connection (my Mac doesn't need to be wireless enabled itself). But this hasn't worked, even though we followed the instruction manual exactly. I suspect that the reason this hasn't worked was because of the underlying problem on my Mac, whatever it is. I've gone back to using the Speedtouch modem to connect to the internet for now.
I've just today done a complete system reinstall of OSX 10.4, and downloaded the upgrade to 10.4.8, in an effort to solve this. Unfortunately, my Mac still seems to be in the same state and it hasn't solved anything. Classic still won't open, the connection still keeps dropping, and I'm almost at the point of kicking the **** thing through a window! Please, has anyone got any bright ideas? I don't know where to start....
G4 Digital Audio Mac OS X (10.4.8)

Hi, thanks for responding.
I've made a couple of changes, double-checked everything, and I have to say that now 10.4.8 has been on my machine for a few days, it's a lot more stable. No crashes. Maybe it just needed to "settle in", ha ha. I also got a router and went wireless, something I needed to do so my wife could use her laptop to get online. This seems to have solved the connection dropping.
So the only thing left is not being able to open Classic. I think maybe you're right, and the new processor doesn't like Classic. But, to tell the truth, I hardly ever use Classic anymore, and I can live without it. So I think I'll leave everything as it is for now, unless something major happens. I spent nearly £500 on the processor upgrade, and it has doubled the speed of my Mac: I really don't want to have to take it out:-)

Lightroom Won't Start!!!

I downloaded and installed lightroom 1.0 on my laptop. Works great. However, when installed on my desktop, it won't start at all. I've searched this forum and don't see anything so I'm looking for suggestion.
My system is a intel e6600 with 2gb ram. I'm running a raid 0 for my OS and wondering if this is the problem. I know cs2 had problems with holding activation setting in a raid 0 environment but I can't even get to a splash screen to enter my license number.
Thanks in advance for any help . . .

Look, I appreciate the help (sarcastic or not) but reading the compatibility issues, I don't read anything here that helps me to get Lightroom to start. When I double click on an icon or the application file, nothing happens.
Windows Vista Compatibility.
Windows Vista is a brand new operating system from Microsoft and has not been available in its final form long enough for Adobe to fully certify Lightroom for use on Vista. Adobe is working hard to finalize support or Vista as quickly as possible and will deliver appropriate software updates over the launch period.
Lightroom 1.0 will install and run on Windows Vista but Adobe cannot guarantee the quality of the software experience until final testing is completed.
Known issues for using Lightroom 1.0 on the Vista operating system are listed below:
1.
Lightroom CD and DVD burning tools will not currently function
2.
Importing files directly from a Camera or Card Reader may not function properly. Please copy files to a local hard drive via the operating system before importing the files into Lightroom.
Working with Lightroom 1.0 and Adobe Photoshop Camera Raw
Lightroom and Photoshop Camera Raw share the same image processing technology to ensure consistent and compatible results across applications that support raw processing. These applications include:
Photoshop CS2, Photoshop Elements 4.0, Photoshop Elements 5.0 and Premiere Elements 3.0.
Photoshop Camera Raw 3.7
Adobe applications must be updated with the Camera Raw 3.7 plug-in in order to ensure compatibility with Lightroom 1.0 develop module settings. Photoshop CS2 users can update the Camera Raw plug-in automatically using the Update tool listed under the Help menu. The Camera Raw 3.7 plug-in can also be downloaded and installed manually by visiting the Adobe web site: www.adobe.com/products/photoshop/cameraraw.html
Please follow the installation instructions carefully.
Sharing Lightroom Settings with Camera Raw 3.7
By default, Lightrooms develop module settings are stored in Lightrooms database. In order to ensure that Lightroom develop settings can be viewed by Camera Raw 3.7 the settings must be written to the XMP metadata block for that file. This metadata is stored in an XMP sidecar file (Imagename.xmp) in the current image directory of proprietary raw files or stored directly within DNG files. To update images with the latest develop settings, choose the library module and select the group of target images. Choose the Export XMP Metadata to File option in the Metadata:XMP file menu.
Note: This menu option is only available in the Lightroom Library.
Viewing Lightroom settings in Camera Raw 3.7
Before working in conjunction with Lightroom and Camera Raw please set the Camera Raw preference to: Save image settings in: Sidecar ".xmp" files. By default Camera Raw will display the image adjustments exactly as performed in Lightrooms develop module.
However, at this time Camera Raw 3.7 is unable to support further adjustments to the following settings or tools:
1.
Recovery
2.
Fill Light
3.
Vibrance
4.
HSL
5.
Grayscale
6.
Red Eye Reduction
7.
Clone/Heal
The controls currently available in Camera Raw 3.7 will continue to function normally and provide incremental edits beyond those performed in Lightroom.
The Lightroom adjustments that are not available in Camera Raw 3.7 can be cleared by choosing the Clear Imported Settings option in the Camera Raw settings menu.
Viewing Camera Raw settings in Lightroom
Raw files edited by previous versions of Camera Raw files will maintain their previous appearance when imported into Lightroom. Note: Those files must have been edited with the preference set to Save image settings in: Sidecar .xmp files in order for Lightroom to respect the previous edit. Files edited in Camera Raw after importation into Lightroom can be updated in Lightroom by choosing the Import XMP Metadata from File from the Metadata:XMP file menu.
Note: This menu option is only available in the Lightroom Library.
Additional Notes on Camera Raw and Lightroom:
1.
Camera Raw will only read the current settings for the primary image in the Lightroom Library.
2.
Virtual Copy adjustments and Snapshot adjustments will not be displayed or available in Camera Raw 3.7
3.
Camera Raw 3.7 continues to provide support for only raw file formats.
4.
Lightroom is able to perform non-destructive editing on JPEG, TIFF and PSD file formats.
Flash Card Downloading and Vista
If you are using Vista.
Right click on the " Lightroom Icon" find your way to the compatibility Tab and click on run as WinXP Service Pack 2.
This seems to allow you to import in any format i.e. Raw or DNG.
NAS units and Network drives
NAS units are a high priority with the Lightroom team further information will be provided at a later date.
At present Lightroom does not directly support network drives.
Unconfirmed at present - NVidia's NView Desktop Manager may cause problems with Lightroom.
Workaround - If you have this manager (and are having problems) please disable the NVidia's NView Desktop Manager on your computer.
The option to change NView should be found by going to control panel and opening the NVidia NView icon.
Lightroom does not recognize Photoshop CS2 - Windows
Perform this at your own risk.
Here's how to fix it:
1) Run regedit.exe from start menu->run
2) Look for this folder:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\App Paths\photoshop.exe
In that folder, there should be a key "Path" and its value should be the folder where Photoshop CS2 (or any other Photoshop version) is installed."
If your registry does not have that folder, created it and add a "Path" key with the value being the path to Photoshop CS2:
C:\Program Files\Adobe\Adobe Photoshop CS2\
You cannot create a library in a Windows Compressed Folder
And it certainly is a good thing. You don't want to suffer the decrease in speed if you install a database into a compressed folder.

MacBook Pro is slow, won't start up

2.4 GHz Intel Core 2 Duo
10.9 Mavericks
I bought this computer on eBay. It ran fine the first couple of weeks, then I started having problems: really slow starting up (or won't start up, gets hung up on Apple screen, but WILL start up when I hold the shift button down), MS Office 11 package won't start up, every command is sllllllooooowwwwww.
Safari takes a full 60 seconds to boot, web pages take forever to load, all apps are slow to boot, commands are slow.
Help?

If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostictest. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary in case your startup drive is failing.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as some other aspects of the configuration that may be related to the problem.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: In each of two steps, you copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is copy; paste; paste again. That's all there is to it. Details follow.
While investigating the problem, you may have started the computer in "safe" mode. If possible, these steps should be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. If you can only boot in safe mode, you can still use this procedure, but not all of it will work. Be sure to mention that in your reply, if you haven't already done so.
Below are instructions to enter UNIX shell commands. The commands are safe and do nothing but produce human-readable output, but they must be entered exactly as given in order to work. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. I am not asking you to trust me. If you can't satisfy yourself that these instructions are safe, don't follow them.
The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n\n' "$1" "$o"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; { o=$(( $(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256 )); [[ $o -gt 1024 ]] && printf "\nPageouts: %s MiB\n\n" $o; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; o=$(crontab -l); PR "User cron tasks"; o=$(cat /e*/lau*); PR "Global launchd configuration"; o=$(cat ~/.lau*); PR "Per-user launchd configuration"; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); [[ $o -eq 0 ]] || printf "\nRestricted user files: %s\n\n" $o; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist"); ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; for d in {,/}L*/{La,Priv,Sta}* L*/Fonts; do o=$(ls -A "$d"); PR "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message. No typing is involved in this step.
Step 2
Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n\n' "$1" "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l); PR "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'error|GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2> /dev/null | pbcopy; echo $'\nStep 2 done'
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
You can then quit Terminal.
To prevent confusion, I'll repeat: When you type your password in the Terminal window, you won't see what you're typing.
Note: If you don’t have a login password, set one before taking Step 2. If that’s not possible, skip the step.
Important: If any personal information, such as your name or email address, appears in the output of these commands, anonymize it before posting. Usually that won't be necessary.
Remember, Steps 1 and 2 are all copy-and-paste — type only your password. Also remember to post the output.

G5 won't start with casing closed

I've had Macs for 23 yrs now, but this is a new one on me ...
I have a G5 running OS X 10.3.9, it won't start unless I have the side panels (outer and inner) removed.
I thought at first that it may have been a HD problem, so tried to restart from CD, and it won't even try ... it just goes to boot from the HD.
So I tried to run applejack, it says there is an "invalid node structure" but didn't do anything for an hr or so, so I gave up on it.
Any suggestions would be appreciated.
Thanks,
Tom

Noisy fans as well? That changes EVERYTHING!
Fans can be noisy for two reasons:
1) they are getting full of dust, which makes them too heavy, they cannot spin fast enough, and this may allow overheating.
Solution:
Take the whole computer out to the garage or outside and blow out the dust with compressed air. The amount of dust inside is shockingly large, and if blown out inside the house, will result in your being sentenced to sleeping on the couch for weeks.
(Plastic vacuum cleaner tools are to be avoided, they are static generators, and can kill your electronics.)
2) the fan bearings are wearing out, which will cause too-slow speeds, overheating, and may cause unexplained shutdowns.
Solution:
Transcribe all the information off the fan's label. Look up the fan online and determine its air movement in Cubic Feet per Minute (cfm) and the noise it generates in deciBels (dB). \[In general, an exact replacement will only be available in the "handy" 10,000-pack.] Find a fan, of the same size (distance between adjacent mounting holes for square fans) with equal or higher air movement and equal or lower noise.
These fans are usually 12 Volt fans that are made variable-speed under computer control, by slightly reducing the voltage when top cooling performance is not needed.
Message was edited by: Grant Bennet-Alder

SAP won't start after recabeling sap system

Hi, 
 
I have recently recabled my sap system (from wireless to wired) and now my sap instance won't start anymore. The weird thing is that nothing major was changed. When i read the logs from the work directory it seems it cannot load dbsdbslib.dll. I have updated to the latest version of the kernel and maxdb (kernel=7.00 patch 221, maxdb=7.6.06.07) and i made very sure i got the right kernel (NT AMD64). I also checked the environment settings for the <sid>adm user. The weird part is that it seems SAP cannot connect to the database, but the databse starts just fine and r3trans -d also returns no errors. Does anyone have an idea what could be wrong? 
 
Kind regards, 
Bas 
 
 
trc file: "dev_disp", trc level: 2, release: "700" 
 
 
command line arg 0: D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE 
command line arg 1: pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap 
 
ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll") 
Error 126 = "The specified module could not be found." [dlnt.c 255] 
sysno 00 
sid IDE 
systemid 562 (PC with Windows NT) 
relno 7000 
patchlevel 0 
patchno 221 
intno 20050900 
make: multithreaded, Unicode, 64 bit, optimized 
pid 3252 
 
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC) 
length of sys_adm_ext is 576 bytes 
SWITCH TRC-HIDE on *** 
***LOG Q00=> DpSapEnvInit, DPStart (00 3252) [dpxxdisp.c 1287] 
ShmProtect( 5, 3 ) 
SigIInit: ok (whoami=1) 
Thread handle for mainthread created 
SigIRegisterRoutine: handler for signal 11 installed (SigISegv) 
Pipe created:
.\pipe\SAP3252 
SigIInit: Create Message Thread 
SigIRegisterExitRoutine: exithandler installed (DpHalt) 
SigIRegisterTerminateRoutine: terminatehandler installed (DpHalt) 
 shared lib "dw_xml.dll" version 221 successfully loaded 
 shared lib "dw_xtc.dll" version 221 successfully loaded 
 shared lib "dw_stl.dll" version 221 successfully loaded 
 shared lib "dw_gui.dll" version 221 successfully loaded 
 shared lib "dw_mdm.dll" version 221 successfully loaded 
dp_loc_queue_max_blk: 40000 
mshost: >sap< 
DpSetCancelStrat: set timeout 0 at level 0 
DpSetCancelStrat: set timeout 5 at level 1 
DpSetCancelStrat: set timeout -1 at level 2 
DpSetCancelStrat: set timeout -1 at level 3 
rdisp/softcancel_sequence : -> 0,5,-1 
softcancel_sequence: >0,5,-1< 
use internal message server connection to port 3900 
msserv: >3900< 
dp_bufreftime: 120 sec 
dp_btctime: 60 sec 
dp_autoabaptime: 300 sec 
dp_autothtime: 60 sec 
dp_autojavatime: 300 sec 
dp_vm_alarm_time: 100 msec 
dp_calldelayed_time: 60 sec 
dp_startup_time: 20 
dp_noptime: 0 sec 
dp_keepalive: 1200 sec 
dp_keepalive_timeout: 60 sec 
dp_ms_keepalive: 60 sec 
dp_ms_keepalive_timeout: 300 sec 
switch off dp-keep-alive for old temus 
dp_gui_auto_logout: 0 sec 
dp_spoolalrm: 60 sec 
dp_softcancel_timeout: 5 sec 
rdisp/wp_restart_interval : 300 sec 
DpISetTrcLog: trc logging active, max size = 20971520 bytes 
dp_rfc_check_active: 1 
dp_rfc_check_all_rfcs: 0 
dp_http_check: 1 
check_master_slave: 0 
NiHsLGetServNo: got service name 'sapdp00' from operating system 
NiIGetServNo: servicename 'sapdp00' = port 0C.80/3200 
NiHsLGetServNo: got service name 'sapgw00' from operating system 
NiIGetServNo: servicename 'sapgw00' = port 0C.E4/3300 
NiIMyHostName: hostname = 'sap' 
NiHsLGetNodeAddr: got hostname 'sap' from operating system 
NiIGetNodeAddr: hostname 'sap' = addr 192.168.2.250 
NiHsLGetHostName: found address 192.168.2.250 in cache 
NiIGetHostName: addr 192.168.2.250 = hostname 'sap' (fq) 
Mon Oct 26 16:14:29 2009 
NiHsLGetNodeAddr: hostname 'www.doesnotexist0190.qqq.nxst' not found by operating system 
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0190.qqq.nxst) took 12 seconds 
Mon Oct 26 16:14:45 2009 
NiHsLGetHostName: address 1.0.0.1 not found by operating system 
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds 
NiHsLGetServNo: got service name 'http' from operating system 
NiIGetServNo: servicename 'http' = port 00.50/0080 
NiHsLGetServName: port 1F.90/8080 not found by operating system 
NiHsLGetServName: port FC.2B/64555 not found by operating system 
NiHsLGetServNo: service name 'sapdp9988' not found by operating system 
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5521] 
SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff) 
SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff) 
SigIRegisterRoutine: alarm handler installed (DpSigAlrm) 
SigIRegisterRoutine: handler for signal 2 installed (DpSigInt) 
SigIRegisterRoutine: handler for signal 15 installed (DpSigInt) 
SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit) 
MtxInit: 30000 0 0 
DpInitMtx: MtxInit o.k. 
PPID environment not found 
Thread handle for mainthread created 
SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp) 
 
 
trc file: "dev_w0", trc level: 2, release: "700" 
 
* 
ACTIVE TRACE LEVEL 2
ACTIVE TRACE COMPONENTS all, MJ
M
M command line arg 0: D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE
M command line arg 1: pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap
M command line arg 2: wp_id=0
M
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll")
Error 126 = "The specified module could not be found." [dlnt.c 255]
B *** ERROR => Couldn't load library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll'
[dbcon.c 4905]
M sysno 00
M sid IDE
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 221
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 4000
M
M kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4000) [dpxxdisp.c 1349]
M Mon Oct 26 16:14:47 2009
M SigIInit: ok (whoami=2)
M Thread handle for mainthread created
M SigIRegisterRoutine: handler for signal 11 installed (SigISegv)
M Pipe created:
.\pipe\SAP4000
M SigIInit: Create Message Thread
M SigIRegisterExitRoutine: exithandler installed (wp_halt)
M SigIRegisterTerminateRoutine: terminatehandler installed (wp_halt)
M SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff)
M SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff)
M SigIRegisterRoutine: alarm handler installed (DpSigAlrm)
M SigIRegisterRoutine: handler for signal 2 installed (DpSigInt)
M SigIRegisterRoutine: handler for signal 15 installed (DpSigInt)
M SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit)
I MtxInit: 30000 0 0
M DpInitMtx: MtxInit o.k.
M WaitParent Thread 3252 start
M WaitParent Thread 3252 created
M Thread handle for mainthread created
M SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp)
 
 
trc file: "trans.log" 
 
 
4 ETW000 r3trans version 6.14 (release 700 - 12.06.09 - 15:20:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 21.10.2009 - 15:06:04
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 21 15:06:06 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbsdbslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] DlLoadLib success: LoadLibrary("dbsdbslib.dll"), hdl 0, addr 0000000188C00000
4 ETW000 7580 0.007580
4 ETW000 [dev trc ,00000] using "D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll" 16 0.007596
4 ETW000 [dev trc ,00000] Library 'dbsdbslib.dll' loaded 19 0.007615
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbsdbslib.dll 38 0.007653
4 ETW000 [dev trc ,00000] Version of 'dbsdbslib.dll' is "700.08", patchlevel (0.211) 307 0.007960
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbsdbslib.dll 26 0.007986
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbsdbslib.dll 24 0.008010
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 46 0.008056
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=0000000000000000) 21 0.008077
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 15 0.008092
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000003B4F920) 20 0.008112
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 15 0.008127
4 ETW000 [dev trc ,00000] New connection 0 created 17 0.008144
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 50 0.008194
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000001A01768) 31 0.008225
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.008242
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 13 0.008255
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 16 0.008271
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO

Edited by: B. v. d. Lienden on Oct 26, 2009 5:18 PM

<div class=Section1>
Natalia,
 
To answer your questions:
1. Did you create the SAP ticket, where this problem is
reported?
I didn't report it to SAP because it is just an IDES test
system. I can easily do a reinstall, but i would like to know the cause and
solution to this problem.
 
2. Do you have dbsdbslib.dll at this location? What version?
Yes, i have the dbsdbslib.dll at location
D:\usr\sap\IDE\DVEBMGS00\exe and also D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
Version is 7000.221.16.41497 (kernel 7.00 SP 221)
 
your requested output:
 
----

disp+work information
----

 
kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700
 
kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL
 
compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
MS VC++ 14.00
 
compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT
 
compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE
 
compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57
 
update level u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A00
 
patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221
 
source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221
 
 
----

supported environment
----

 
database (SAP, table SVERS)u00A0u00A0 700
u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\ideadm\Application Data
CLIENTNAME=BSF02
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=SAP
ComSpec=C:\WINDOWS\system32\cmd.exe
DBMS_TYPE=ada
DIR_LIBRARY=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
DIR_PROFILE=D:\usr\sap\IDE\SYS\profile
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\ideadm
JAVA_HOME=C:\j2sdk1.4.2_21-x64
LOGONSERVER=
SAP
NUMBER_OF_PROCESSORS=2
OS=Windows_NT
Path=D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\j2sdk1.4.2_21-x64\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program
Files\Intel\DMIX;D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=EM64T Family 6 Model 15 Stepping 13,
GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0d
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
SAPEXE=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
SAPLOCALHOST=sap
SAPSYSTEMNAME=IDE
SESSIONNAME=RDP-Tcp#47
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\WINDOWS\TEMP\2
TMP=C:\WINDOWS\TEMP\2
USERDOMAIN=SAP
USERNAME=ideadm
USERPROFILE=C:\Documents and Settings\ideadm
windir=C:\WINDOWS
 
----

disp+work information
----

 
kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700
 
kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL
 
compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
MS VC++ 14.00
 
compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT
 
compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE
 
compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57
 
update levelu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0
 
patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221
 
source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221
 
 
----

supported environment
----

 
database (SAP, table SVERS)u00A0u00A0 700
u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
 
 
</div>

Cannot modify FSB speed on my 850 Pro5(MS 6545)

I've been trying to modify the FSB speed of my 850 Pro5(MS 6545) but have been unable to. In the Bios, under "Frequency / Voltage Control / CPU Clock", I've tried to put in 133. However, after I save my changes, the POST still lists my FSB speed as 100. If I come back into the Bios, it lists my setting as 133 but it seems to have no bearing on the FSB speed that the board is running at. I've tried setting my memory speed at either Auto or 400 Mhz. Neither seems to help. I am using PC800 memory but was hoping to overclock it. My CPU is a P4 2.53 (533 Mhz FSB).
Fuzzy Logic 3 and 4 do not seem to do anything either. I am running Windows XP.
Please help!

bdelgado!,
You have to do it in incriments, with mine I have to go to 105 FSb, save and exit. then I can jump right to 115 FSB. Which calculated is 2070, from a 1.8A P4. I have gone as high as 120 FSB, but it get's alittle warm! hope this helps

Changed FSB speed - PC won't start

Similar Messages

Maybe you are looking for