Changed FTP - "contribute cannot remove the administrative settings"

We developed a major site at a temporary subdomain on our server. Then, we changed that subdomain (to replace an old version of the site with this new version).
I created a new FTP account for this new location. (The files are at the same place on the server, but under a new http:// location) This FTP account works fine with other FTP client software.
When I try to create a new Contribute connection (using CS4), it notices the site has moved and asks whether I want to remove the administrative settings. I say "yes." When I do, the error message I keep getting is "contribute cannot remove the administrative settings."
I double checked file permissions for all the files within the /_mm subdirectory. They were set at 644 (for files), so I changed them to all to 664 to include access by the new username.
Any ideas as to why Contribute can't "clear the slate?" And is there some way to force this, even erasing files manually?
Best,
Greg

Hi,
     Can you change the ownership of the files and folders in the _MM folder and also that of _MM folder, to the new FTP user, and then try removing the administration settings?
     Also, I wanted to ask, does the new FTP user belongs to the same user group as that of the old user, if not, try adding the new FTP user to the same group and then try removing the administration.
     Hope this helps.

Similar Messages

  • Contribute needs to remove the administrative settings

    Starting today, I lost my administrative connection to my website. When I try to connect again, I get these messages:
    The administrative settings for ... are invalid. To continue connecting to the website, Contribute needs to remove the administrative settings, including users and roles. Are you sure you want to continue?
    I have never seen this message before. How can I reconnect to my website without having Contribute remove my adminstrative settings? Or is there a way to save my settings and restore later?

    This happens because you have moved to site to new host, the host name and the IP address will differ from the one saved in the cthubxxxxx.csi file inside _mm folder in the site. Or the IP address is not static and got changed.
    Solution 1: Click Yes (All the adminitrative settings will be removed). And Administer the site again, create new roles and configure the role settings accordingly.
    Solution 2: If you have access to the server, Open the cthubxxxxx.csi file inside _mm folder of your site and replace the old hostname and IP address with newer one. Then reconnect.
    Hope this solves your problem.

  • To continue connecting to your website, you must repair or remove its administrative settings

    Hello.
    When trying to connect to my website, I'm getting a prompt saying the files appear to have been recently moved.....yadayada. I realise it's like this since we have changed to a new host since I see our old one there correct? OK-so my question is what happens after I click that button that says to remove the administrative settings for your website and continue connecting?
    I've been told to update our website and I don't have a whole lot of knowledge about it. I do connect to it at work through ftp for uploading pix and access to cpanel but that's about it.
    The person that did the site no longer works with me, but I know that he used Contribute3 (Macromedia) for at least some of the site, so I'm assuming the new Contribute will work.
    I really don't want to screw things up clicking that button and somehow mess up our site.
    Thanks for the help!
    Jim

    Thanks very much Dominic:
    I was able to open that cthubxxxxx.csi file in text editor and I assume I just put in http://www.liquidweb.com (in place of our old host in at least 3 spots) since they are our new host? As far as the IP addres goes, where do I get that or find it? Is it the IP address for the host (liquidweb)? I assume I call them for this information?
    Just one other question:
    I noticed on the cthubxxxxx.csi file it says macromedia_dreamweaver_hub. I assume that means the site was made with dreamweaver? I assume I will be able to edit with Contribute?
    Thanks again for your help-
    Jim

  • I cannot remove the dialog box from my ipad. It says 'not enough storage' I click on settings and close, but still there. I need help. thx

    I cannot remove the dialog box from my ipad. it says 'not enough storage'. I click on settings and close but still there. How can i remove this message? Thnx

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Contribute cannot find the website files on the server

    Hi there.
    I'm having problems when trying to create a connection to a
    previously working website. Here is the error message I get while
    importing the connection key:
    Contribute
    Contribute cannot find the website files on the server.
    Please contact this website's administrator for assistance.
    OK
    Now, the only thing that has changed is a rebuild of our
    ISA2004 gateway / firewall, but I created a rule that allows my
    computer unrestricted outbound access to the internet, and it still
    does not work. I have tried a couple of different computers on this
    network, each having the same result.
    I've imported the connection key on my home adsl connection,
    and it works perfectly.
    Any ideas on where to start or what might be causing this?
    Thanks in advance

    Yes, I did manage to get this working.
    In the ISA Server management program, under configuration
    then add-ins, there is one called "FTP Access Filter".
    After disabling it, contribute started working correctly
    again.
    Cheers, hope this helps.

  • TS3212 I cannot reinstall I tunes, I keep getting amessage saying cannot remove the older version of I tunes even though the older version has been removed

    I have tried to uninstall i Tunes but although it is not in the programme files anymore it is still showing when I use the control panel to to try and uninstall it.When I click uninstall I get a message "The feature you are trying to use is on a network resource that is un available" I am now in a position where I cannot use or uninstall the existing version and I cannot install the updated version because I get amessage saying "cannot remove the old version.Can anyone help?

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • ITunes on my phone is no longer playing some songs, even those I have purchased with my phone.  They will play fine on my pc itunes.  I also cannot remove the audio books that are on my phone and add others and the audio books on my phone will not play.

    I am unable to play new songs purchased on my phone and some old songs on my ipod/iphone.  They all work fine in iTunes on my computer.  I also cannot remove the audiobooks from my phone when I sync even though I have unchecked said books, and I cannot play them either.

    C Mawle wrote:
    Thanks.  I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
    Yes it would, possibly even brick it.
    Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
    Can I use my ipod nano USB connector to check?
    It is not much help to you, since the device that you need still not recognized.
    Anyway looks like I may have to swallow the loss of data.  Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
    Good luck, but if you expect miracle from that call good luck again.

  • HT1600 I want to update my Apple TV software but cannot find the recommended Settings General Update Software sequence?

    I want to update my Apple TV software but cannot find the recommended Settings>General>Update Software sequence?

    Start here

  • How do you have Google searches appear in new tab? This was previously not a problem, but it changed and I cannot return the setting. Any ideas?

    How do you have Google searches appear in new tab? This was previously not a problem, but it changed and I cannot return the setting. Any ideas?

    I recently purchased a second hand new macbook air, although it was second hand to me the previous owner had never actually turned it on.
    Something doesn't make sense here, though I'm not saying the previous owner is lying....
    Time to send your serial # to iTS and let them see what's happening here.
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • I have just downloaded itunes. I cannot install QT as an older version is in place. Cannot remove the older version using CP. Any ideas?

    I have just downloaded itunes. I cannot install QT as an older version is in place. Cannot remove the older version using CP. Any ideas?

    Many thanks.
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
    Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?
    Message was edited by: b noir

  • Cannot remove the access control entry object on the object because the ACE isn't present

    Hello,
    I am very new to using Powershell and Exchange Management Shell, and have no prior experience using either of these tools. However, the software I am installing requires me to use the EMS tool in order to set certain permissions for a user in Exchange, which
    will be like the admin account. 
    The command I am attempting to run follows as:
    Get-ExchangeServer | Remove-ADPermission -User $newusername -Deny -ExtendedRights Receive-As -Confirm:$False 
    This throws me an error saying:
    cannot remove the access control entry on the object because the ACE isn't present. I've done some research, and have found that this error is quite common, but the solutions do not apply to what I am specifically trying to accomplish. I am simply trying
    to remove the Receive-As permission for the admin user that I just created.
    Once again, I am very new to Exchange and Powershell, but if there is any advice anyone has, it would greatly appreciated.

    I ran this command, and a very long list was displayed, it looks like everything is there.
    The weird thing is that I was able to run a previous command which granted Receive-As access to the user I am creating: 
    Get-ExchangeServer | Add-ADPermission -User $newusername -accessrights GenericRead, GenericWrite -extendedrights Send-As, Receive-As, ms-Exch-Store-Admin -Confirm:$False 
    The description for the commands to run read to 'grant permissions and to revoke denies, if present'. I'm not sure what this means, but the second part of this pertains to the second command that I am having trouble with:
    Get-ExchangeServer | Remove-ADPermission -User $newusername -Deny -ExtendedRights Receive-As -Confirm:$False

  • HT2513 After accepting the new Apple upgrade to iOS 7.1 on my iPhone 4S, I cannot remove the half month calendar view to show only the daily view. Help!

    After accepting the new Apple upgrade to iOS 7.1 on my iPhone 4S, I cannot remove the half month calendar view to show only the daily view. Help!

    Before you panic, try resetting your iPhone by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.

  • I have tried everything and still cannot remove the lock on my ipad. I do not want it.  HELP

    I guess it is a. Ipad 2 with/fi. invoice says k93ipad wi-fi 16gb.  I am not sure what it is. I accidently set up a password lock and I do not want.  I have tried all the suggestions and cannot remove the lock

    See here: http://support.apple.com/kb/HT1212

  • I cannot remove the rotate screen sign on the upper right of my iphone5s, how can i remove it?

    My iphone is locked & can't be rotated, tgere us a sign but I cannot remove the rotate screen sign on the upper right of my iphone5s, how can i remove it And rotate the phone ?

    Locking Orientation
    (Note that I am affiliated with this site, it contains a donate button, and some pages contain ads).

  • I've tried updating iTunes for Windows but it won't work. I removed iTunes and downloaded the new version (10.6.1.7) but it won't load. It says it cannot removed the older version of iTunes.

    I've tried updating iTunes for Windows but it won't work. I removed iTunes and downloaded the new version (10.6.1.7) but it won't load. It says it cannot removed the older version of iTunes.

    It says it cannot removed the older version of iTunes.
    Doublechecking before proceeding ... what's the precise text of that message, please? (There's a couple of different ones I can think of that you might be getting.)

Maybe you are looking for

  • What do I have to do or to avoid to prevent CC from crashing immediately after opening?

    I installed both PS CC and BR CC for a second time and received and installed the first updates for CR 8.1 but still I cannot open PS CC without it closing on me immediately again. And when I try to open any photo in PS CC from Bridge CC I get asked

  • Can't do GoPro Hero 3 lens corrections in Photoshop CC

    I'm a creative cloud subscriber. I just watched a great video on Adobe TV showing me how Photoshop CC can do lens corrections for GoPro Hero 3 black edition cameras. However, when I imported my GoPro Hero 3 footage into Photoshop CC, GoPro did not ap

  • IPad Mini display shaking

    The last couple of days the content of the display on my iPad Mini goes crazy after a period of use. On any screen things just move about wildly. Switching off cures it, but it starts again after a few minutes of use. This is not the shaking one uses

  • MAX explorer 4.5 won't repair/uni​nstall

    I just had a new hard drive installed and the migration of my old drives caused problems. I attempted to perform an uninstall then reinstall of Labview v8.6.1. The MAX Explorer 4.5 won't install properly. I tried using MSIBlast to repair and got the

  • Invalid currency message 131-74

    hello I have this message when i want to create a document in B1 I use a demo database, where many add-on are installed, maybe it should be the reason? So how delete user table and user zone ? Thanks Sylvain Rouchon