Changed IP address of FC Server - Now a client app issue...

Okay, so of course I changed the IP address of our Final Cut server after the install. Now, the client machines freakout when you load the client. They sit there and give you some errors. I click on "OK" and hope to see the window where you could type in a new IP address, but instead it just quits out. If you try about a dozen times it sometimes comes up, but mostly doesn't.
Any ideas? I tried trashing preferences but no luck. Must be hiding something somewhere!
Ryan

Have you tried clearing out all your java and browser caches? Make sure the browser is pointing to the right URL for download... I have some users able to log into different instances of FCSvr. Each new FCSvr is saved in the dropdown of the Java client.

Similar Messages

Ora VM 3.2.1 - how to change IP address of VM server? (management interface)

Hi, I cannot find in doc how I can change IP address of VM server.
I have static IP address 10.3.37.29, and should be 10.3.37.27.
I have 8 virtual guests on this server, I cannot aford to lose it.
Can everybody tell mi any tip, how to manage it, please?
Thank you in advance
Vladislav

Hi ,
Please use the below link to change the Ip address of the server :
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.3/user/guide/diagnos.html#wp1165007
Thanks--
AfroZ
If this post answers your question, please click the "Correct Answer" button"

Changing ip address of one server to another in license server

Hi everyone,
I donu2019t know if my question belongs in here; forgive me because Iu2019m a newbie here and in using SAP as well. I was designated to investigate about a recurring issue of one of our client. The scenario goes like this..
Our client has 2 stores/branches (A& B); each store has sap server and license. We normally install remote desktop and sap business one client so that their workstation can connect to the server and do their task efficient with authorization. We always receive calls that they were offline the whole night. Why is this scenario happening? We found out that the license server ip address of store B (under license administration) was already changed to Store Au2019s ip address. They claiming that they never did anything. They donu2019t do it manually (adding store Au2019s ip add to sap b1 service mgr). Please give me any other advice/ suggestions or to dou2019s for me to be able to track if its our mistake or our clients mistake?
Iu2019m looking forward to your answers soon.
Thanks,
Pipay

Hi Sir Rahul,
I'm glad you replied, I actually did the same thing. The reason why they're saying that the server A ip add becomes sever B ip add is because the ip add were change, and this thing can be possible if there's someone (maybe the user itself or client) manually change the ip address in license server or add it in service manager. BUT when we ask them, they did not change it manually nor add it. they keep on insisting, Itu2019s just automatically change and if I'll conclude that there were the one who made a mistake, I still have to check first. What are the possible scenarios why these things happened; aside from manually add/encoding. Is it because of the sap b1 client?
My co-worker told me that she notice this store doing this scenario: from one of server Au2019s workstation (A.1) they will connect to server B which I think can cause server A to offline. Is it possible?? Iu2019m confuse but I need to resolved this issue
Thanks,
Pipay

Changed IP address, how do I update the clients

I've poked around but all I can find is info about how to change the IP address of a TC without additional information about what to do with existing clients.
I'm not using a TC in this case (NAS frontended by a Mini providing AFP accesss), but I figured this would be the best place to ask.
I set up TimeMachine on most of our Macs (all 10.7 and 10.8) a few weeks ago, but just had to reconfigure my network which neccesitated changing the IP address of the host that provides the TM remote disks.
How do I tell the clients to start using the new address of the server? Will just adding a new disk do the right thing (I haven't tried as I don't want it to clobber what already exists).
Thanks.

Yes, you have to change the setup in each computer to redirect it to the new location of the backup disk..
You can do a TM reset.. but that should not actually be necessary.
See A4 here. http://pondini.org/TM/Troubleshooting.html
But TM is smart enough that when it finds the disk.. it will then find its previous backups and continue the backup .. after suitable verification. You can change the computer name. Change the disk name. Change the backup sparsebundle name.. TM will still find it and continue to use it. And even if there are multiple sparsebundles or disks with the same name or even computers with the same name.. which would break network rules,, but TM still won't get confused.
Again read up a bit of how TM works its magic.
http://pondini.org/TM/Works.html
The UUID is picked up from source hard disk I guess.. and that is what is used. This ensures everything is kept separate from names or even IP address.

Changed email address in Apple id, can't update apps

Hello
I recently changed the email address associated with my Apple ID, so now I sign in to the iTunes store with the new email address. iTunes shows me in the Library that there are a bunch of app updates available. However, when I click on the arrow next to the '16 updates available' link, it takes me to the store view which informs me 'No updates are currently available. To check updates for another account, sign in with that account.' I don't have another account and I think this is happening because I changed the email address. Is there a way to clear this up, i.e. get the store to recognize the new email address with the old account info and apps?
Thanks very much!

Try changing your e-mail address back to see it iTunes is working properly. If that doesn't work, then at least you know you have a serious problem with the Apple Store.

Change network address of acs server

Put in a new backup ACS server and the senior guy put in temp host address. Now
need to change the temp host address to its permanent address but need a little clarification. Do you just change it in the Windows srvr 2003 tcp/ip stack or do you need to change it also inside the CSACS app?? Can't find it in the manuals easily.

Yes you'll need to change ACS config. Just locate the AAA Server entry for the server (in Network Config) and set the ip address to the new value.
Or you can always just enter the server name instead in case the address changes again.
tip: in network config you can enter DNS names instead of ip addresses for devices & aaa servers.

Change IP address of LDAP Server

Hi,
I am using Directory Server 5.1 SP 2 HF2, and have installed the server using a 10.x.x.x address but now need to change this to a production 172.x.x.x address. Is this an easy process and how do you go about doing this?
Are there any Sun docs on this?
Thanks
D

There is a script called admin_ip.pl provided with the directory that will handle the IP address change. It is located in the /shared/bin directory.

Changed IP address on Time Capsule now can't back up

I have a time capsule 2GB model. I was using the time capsule only for backup as I had a router. The router I was using has gone bad so I decided to use the time capsule as a router also.
I set up the router portion of the time capsule as 192.168.xxx.1. It was 192.168.xxx.111. It works fine as a router. Now my MacBook Pro can not backup to the time capsule.
I would guess that the change in IP address is confusing the MacBook Pro as to where the backups go.
Should I change the IP address for the time capsule back to 192.168.xxx.111?
Is there a way to tell the MccBook Pro about the new IP address?
Should I reset the time capsule back to factory and configure all over again?
Any other suggestions.
Thanks
Ralph Foss

Did you try resetting Time Machine?
Open System Preferences and open Time Machine
Click Select Disk
Click your Time Capsule to highlight it
Click Use for Backups

Change email address on my account, now can't purchase content from aTV?

I recently changed the email address associated with my Apple account, and now when I try to purchase something through my Apple TV, it shows my old email address and then when I enter my password it denies me cause it doesn't recognize the old email address.
How do I get my Apple TV to recognize the fact that my Apple ID and email address for my account has changed?

Try making a purchase from the iTunes on the host computer, maybe there is a new 'agree to terms' box you have to check or something because you changed your account information - that sometimes works.
Brian.

10.6 Server, 10.8 Clients (ML) issues with Contacts & Mail

I'm seeing issues with Mail in ML and contacts and our 10.6 server. All users are on a network home directories and using the Address Book service on the server. Mail and Contacts fail/work intermintently when both of them are running. Stopping and restarting either program may solve the problem.
Users of 10.7 clients see no issues. Only users of 10.8 ML have problems with Mail and Contacts. Its very obvious that Contacts and Mail are having issues with each other. I can remove the contents of the Address Book in the local user's library and and relaunch Contacts to run with out problems. As soon as you start Mail problems arise quickly.
While Mail is accessing the address database it will demonstrate long delays.
Any direction or help is much appreciated!

This is a known bug of ML. The operating system is not compatible with AFP home directories. You will notice that FaceTime won't work either. In addition, there are sandbox problems, preferences problems and performance issues.
In my experience, the only possible workaround is to convert all forks and Extended Attributes in the home directories to AppleDouble files and then switch from AFP to NFS. This can result in Spotlight issues, but otherwise, all applications will work fine and much faster.

Lion server/Mountain Lion client connection issue

I am trying to set up our work Lion Server to use open directory. The DNS settings are fine on the server side but the Mountain Lion clients cannot bind to the server. We are hoping to get a static IP soon so the directors can access the network remotely but I want to get this cracked before I take that step.
The server was set up normally as far as I'm aware (I didn't set it up).
I'm wondering if I upgrade the server to Mountain Lion if that will help, it seems as though open directory is easier to manage wit ML. Would I need to reinstall server and start from scratch?
Any help much appreciated, excuse my ignorance I am a bit of a novice but do have some experience.

After force Quit the option Notes is not marked in the new configured Profile. I check it in a new VM and fresh clean install and have the same problem.
If is it not marked, the Sync not with the Server and save only localy.
Have you check it with an other Mac or Device too?

Message Server Unreachable (after changing IP address at host)

Hi guys,
I changed the IP address in my server. According to note 403708, I updated the new IP address in /etc/hosts. The note also suggests me to change in /etc/services but I see no IP address for me to update.
Later when I restart my sapinstance, I see the disp+work.exe is "Running, but Message Server Unreachable". I've also updated the IP address in SM59 but I see no change.
This is what I got from dev_rfc.trc:
ERROR file opened at 20071206 221839, SAP-REL 620,0,674 RFC-VER 3 549374 MT-SL
T:5048 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1400
T:5048 <* RfcDispatch [1] : returns 1:RFC_FAILURE
This is what I got from dev_disp:
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
Anyone has any idea?

Yes I'm on Windows, the path that i'm refering is:
winnt/system32/drivers/etc/services
winnt/system32/drivers/etc/hosts
Anyway my prob is fixed now. Probably the problem is due to I did not restart the server after changing the IP. Anyway everything looks pretty fine now
Thanks guys

DS 6.0 - Changing Ip address of 1 master server in MMR configuration

Hello,
I have 2 servers in MMR configuration - serverA and serverB.
I had to change the IP address of serverA in preparation to a
pending physical move. The hostname stays the same.
Now when I login to serverA's DSCC console, I am able to see all directory instances on A and B. When I log into serverB's DSCC console, the instances running on A come up as stopped/disabled, even though they are actually up. So I unregistered on of the server A's instances on B console. Now, when I try to re-register, I get an error that "Could not contact DSCC agent on server A...". I've verified that DSCC agent is running on serverA on port 11162.
Needless to say that my replication is also down.
What is the right procedure to follow in case one has to change the IP address of a server in a MMR setup.
Thanks for your feedback.

As long as you've been configuring Directory Server, Replication and DSCC with hostnames, there is nothing that is tied to the IP address of the machines and you can change the IP address of any Master or Consumer without any impact on the Directory Service itself.
But you probably need to restart the host itself...
Regards,
Ludovic.

How do I change an IP address of SQL Server which is locally hosted and is not on cluster?

Hi All,
How do I change an IP address of SQL Server which is locally hosted and is not on cluster?
I am asking about IP for SQL Server, is there a way we can assign a different IP to SQL Server other than the server's(host) IP address? like the same what we do in a clustered env.
aa

Full explanation can seen here:
SQL Server: Configure Listening IP, Port, and Named pipe
http://ariely.info/Blog/tabid/83/EntryId/151/SQL-Server-Configure-Listening-IP-Port-and-Named-pipe.aspx
[Personal Site] [Blog] [Facebook]

I changed my apple ID password and now facetime cannot verify my e-mail address. I have tried changing my password back but still recieve the same pop up window telling me that the email could not be verified and to check my network but have wifi working

Please help. I changed my apple id password and now cannot use facetime and my icloud continues to prompt me for my password and I continue to give it but, I repeatedly am prompted for the password unless I cancel the icloud. I have tried changing my password back to the password I had before and this did not work. I have tried to use another e-mail address for facetime and had verified that e-mail address and this did not work. I do not know how to fix this problem. I have thought about changing my apple id but am not sure how I would be able to carry over the same credit card number to the new apple ID. I loved my Mac book Pro because I could facetime my boyfriend while I am working away and now I cannot. I am starting to hate Mac.

The idea to jumpstart by change was not the smartest one, but gives you an opportunity to use that "temporary" account as permanent. You do not have a choice cause obviously despite you thinking that old account is no more -it does exist on Apple servers. And if you are unwilling to share your [email protected] with friend, just create one extra [email protected] for your friend. One suggestion - do not use gmail.

Changed IP address of FC Server - Now a client app issue...

Similar Messages

Maybe you are looking for