Changed MIC in quality plan for new lot.....

Hi All,
I created quality plan for one material and did result recording.
Now again new lot is created for same material but this time I donu2019t want to check same MIC what I did last time.
I deleted the pervious MIC and added new MIC what I want to check. After doing that again I went to QA32 to do RR for new MIC but its showing pervious one.
So what I have to do.
Please suggest me.
Regards,
Siddharth shanker

Dear Siddharth,
I created quality plan for one material and did result recording.
No issue this is fine.
Now again new lot is created for same material but this time I donu2019t want to check same MIC what I did last time.
If you don't want to check same MIC's there are two options :
a) Go to insp plan delete / overwrite the MIC and save, please ensure that your lot is generated after this change is made. new plan will be applied.
b) Make a separate task list with other set of MIC's and while assigning the task list to inspection lot you can select the desired one.
I deleted the pervious MIC and added new MIC what I want to check. After doing that again I went to QA32 to do RR for new MIC but its showing pervious one.
Pl check when the lot has been generated, if it is generated before you have done the changes then lot will not show new MIC's. for that you have to go to QAC3 to reset the insp lot.
Best Regards,
Shekhar

Similar Messages

Change the default country code for new contacts in Outlook 2013 for countries not listed in Control Panel Region Format

Dear all,
I would like to change the default country code for new Outlook 2013 contacts. My country is Mozambique (+258) and is not listed under Control Panel> Region> Formats> Format:
Is there any place (registry maybe, anywhere) where I can manipulate the existing formats or manually add a new format to the List ??? - for example Portuguese (Mozambique).
I am using Windows 8.1
I have tried changing the country on the phone and modem options and nothing changes. Also changing the Home Location on Region> Location to Mozambique didn't change a thing. The only place where I change something and produces results is the
Format List.
Any ideias???? If not, is there a place where I can ask Microsoft to include Portuguese (Mozambique) on future windows updates???
Kind regards,
Osvaldo

Hi,
Windows uses the information set under
'Phone and Modem' in the Control Panel to determine the default area code.
You can change the country/region to
Mozambique
and set your area code here:
Regards,
Steve Fan
TechNet Community Support

Making change in original application file for new version

Hi
I am new to DMS.
I have a basic query about versioning of DIR.
I have created a DIR with status in Released.
I have attached a original application to the DIR. Now when I am creating a new version of DIR, original application file is also getting copied to the new version which is desired.
My problem is I want to make changes into original application file in new version of DIR and want to save. But I am unable to do so. It is not allowing me to change the original application file for new version which is desired for storing some ISO documents.
Is there any settings which I am missing?
Waiting for reply ASAP.
Thanks and Regards,
Niraj Sikligar

Hi
If you want to make changes in the "Release" Status, go to dc10, select Doc type and define status screen. Do not put "S" (Lock mode) for Status - Release
Also please check in new version , you are clicking on Edit symbol in Orginals tab, if u double click the file, it would open always in display mode , and it wont allow you to make any changes
Regards
Aby

Do I have to change to a Verizon Plan for a new smartphone? Issue not yet solved....

Hey everyone,
I am an old Alltel customer who is still using the same Alltel plan. I am on a family plan and I believe we pay around $233 which includes 5 phones will unlimited texting/picture messaging, and of those 5, 2 are smartphones.
I am wanting to upgrade my own "basic" non-smartphone to a smartphone this year, but have been told that I will have to change to a Verizon plan. I understand that I have to buy a $30.00/month plan for the smartphone, but I have to actually rechange my whole plan?
I have been told from the 1-800 number that nothing will change, besides adding the $30.00 fee, but I have been told at a local office that I will lose my unlimited texting, hence, going onto a Verizon contract and paying more money.
Please tell me that VZW is not that money driven, and if they are, what is the best possible plan that can get me the same features for around the price I am paying, with a 3rd smartphone?
I thought I'd post this because there haven't been any posts of this nature lately after VZW got sued for $25 million, thinking maybe VZW will allow Alltel customers to updgrade to a data phone.
Thanks in advance for the help!

Actually it was brought up this AM and I replied there. Here is the link.

My plan for new FCS install with questions

End-of-fiscal-year budgetary windfall enables a giant leap from a G4 running FCP 4.5 to a spankin' new 8-Core machine for FCS2. (Hello Motion!).
I'd like to identify any "gotchas" in a new FCS install before I jump into it. Your advice and comments from personal experience are appreciated.
Here's my plan, based on what I've read here, and a couple of questions:
1. Update to latest available OS from whatever version is on the machine.
2. Run installer from disks - repair permissions.
3. Update FCS and Quicktime, if any updates are available - repair permissions.
4. Connect to old machine via Firewire target mode - transfer project files, plug ins, and any universal applications that might be useful.
5. Copy media from my old, external scratch drive to the internal eSata drive I plan to use as the new scratch - seems like a good time to repair permissions once more.
6. Launch FCP, set up preferences and drives, open an old project and reconnect media.
I'm starting with existing DV media and timelines, but part of our studio upgrade includes new Sony EX-1 cameras, so we'll soon be working with XDCam files. I haven't decided which quality level yet.
Do the new mixed-format timelines work as advertised? Lots of legacy material to deal with.
Is there any advantage in capturing XDCam and DV footage to separate drives?
I'd like to repurpose my old external drive for automatic back-ups. Is the Time machine working well for everybody?
That's enough to wrap my brain around right now. Thanks in advance from a long-time lurker. Always great discussions here.
Rob A.

Rob,
Congratulations on the new toy! You gotta love those year end surpluses.
FWIW, I think that you are on the right track. I would second the other response that said to only migrate project files. Everything else needs to be installed, especially since you are going from PowerPC to Intel.
internal eSata drive
This just made me laugh, it's kind of like having a "Hot" water heater. Anyway, the "e" in "eSATA" stands for "external" so having an internal external drive would just be strange.
Do the new mixed-format timelines work as advertised?
This is one of the most misunderstood features about FCS2. You have always been able to mix media on a timeline, and then render. The trick was that you had to choose what kind of timeline you were going to mix your media in. You remember on the old version you would open up a new project, bring in your media only to realize that you forgot to change the easy setup to the new media type. So now you have to delete "Sequence 1", change the easy setup, open a new sequence and everything was good. In the new version you open up a project, get your media, drop it on the timeline and FCP says, "hey, that media is different from your sequence settings, would you like me to change them for you?" Then you can go ahead an d mix media, and render.
Moral of this story, choose your sequence settings according to what the majority of your media in the sequence will be because you will have to render anything that doesn't match.
Is there any advantage in capturing XDCam and DV footage to separate drives?
No.
Hope this helps,
K

EREC: Activities are already marked as planned for new candidates

Hello All,
when I log on as recruiter and open assignments to a requisition, select a new candidate (that is totally new in the system) and go to "Activities" two activities are already two activities marked as planned for this candidate.
The activities are "Check Suitability" and "Check Documents for Completeness" only in process step "Inbox".
Process step "Pre-selection" also contains one of these activities, but here it's not marked.
Any idea what could be the reason for this and how I can change these settings?
E-Rec is on EhP5 and NWBC HTML is used as frontend.
Thanks for your help.

Hello Carla,
These activities are created automatically once a candidate applies. This is done by the workflow WS51900010. So if you don't want them to be created you can copy the workflow to a custom one and delete these steps.
Regards
Nicole

Changing the time iTunes checks for new podcast episodes

My broadband supplier allows me unlimited downloads from 00:00 to 08:00 and I want to use this time to download podcasts. I have set up iTunes to check for new episodes every day and download nay it finds but I can't set the start or end time.
I am running Windows XP, do I need to edit the registry ?
Thanks,
colin

Hi colin, welcome to discussions.
No need to edit the registry.
If you check the "Podcasts" tab in the Preferences, underneath the option "check for new episodes". There is written in tiny letters, when iTunes is going to check the next time. In your case, that would be the same hour you checked last time but on the next day.
So, I suggest you actualize the Podcast folder manually at 00:01, f.e. The next day, iTunes will do so on it's own. As long as it is running at midnight, iTunes doesn't change this setting, and, as you have broadband, the downloading shouldn't take 8 hours per day.

How do I change the start up page for new tabs?

I've tried looking through options but I can't seem to find anything related to it. Please help.

New tabs are blank by default, there's no setting for changing that in Firefox. If you have something other than a blank page now appearing, an add-on you have installed changed the default action.
You can use this add-on to specify which page you want to open in a new tab. <br />
https://addons.mozilla.org/en-US/firefox/addon/newtaburl/

Change dedicated meeting space options for new Lync Meetings

Is there a way to change the dedicated meeting space option to change "These people don't have to wait in the lobby" to Anyone? I know we can run set-csmeetingconfiguration on the global object, but this seems to change only new meeting
spaces not the dedicated meeting space?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Per my understanding, the purpose of dedicated meeting space keeps the same ID and permissions. Content, such as PowerPoint presentations or other files remain in the meeting until you delete them. It is option for informal meetings with
coworkers, which lets them sign in at any time with presenter permissions. There is no way to apply the option "These people don't have to wait in the lobby” for the dedicated meeting space. It’s by design.
Kent Huang
TechNet Community Support

How do I change the default save location for new files in Pages back from iCloud to my Documents folder?

I just upgraded OSX to Mountain Lion and Pages to 4.2, and because OSX is syncing with my iCloud account, when I go to save a new file in Pages it defaults to try to save to my iCloud account rather than giving me the folder structure on my hard-drive that I prefer. It requires two extra steps to save to the proper place in my Documents folder on my hard drive.
Is there a way to reset the default so that when I go to save a new file, the folder structure opens to the last saved folder (like it does in other non-iCloud applications) rather than defaulting to my iCloud, and to do it without just removing documents from my iCloud account entirely?
I checked the Preferences for both Pages and iCloud and found nothing about this.

What I meant is turn off Documents and Data in iCloud in OS X. Keep it on on your iOS devices. iCloud will sync documents between the iOS devices and make them available on the iCloud web site, but it won't mess up iWorks' open and save dialog boxes. It also won't assume that you want all your documents in iCloud, which I think is undesirable anyway.
Keep iOS and OS X separate, and use the web site to move files between the two as necessary.
iOS iWork is different from OS X iWork. There are fewer fonts on an iOS device. iOS iWork programs have slightly different feature sets than OS X iWork programs, and the file formats are different. iCloud automatically converts the file format when necessary, but if you make a habit of saving things directly to iCloud, you are limited to the lowest common denominator between the two versions of iWorks. So why would anyone want iWork on the Mac to open and save documents on iCloud by default?
If you want to store files in the cloud and sync them on your Macs, SugarSync is a much better solution. It lets you choose your sync folders, it doesn't make you reorganize your files, it lets you sync all file types, it doesn't convert files to a different format and back, and it stores everything in the cloud, too. Just the simle act of saving a file backs it up and syncs it. I wouldn't live without it. iCloud is best with iTunes purchases and synchronizing Mac settings and iOS files; I woudln't live without it. The two make an unbeatable combination.

Help with plan for new system

I was hoping to get a little expert advice on the system that I am planning on building. I was looking at picking up the "MSI Z68A-GD80 (B3)" motherboard, along with an Intel 510 SSD 120 gb drive. I am planning on partitioning the SSD into two drives, one for the max 64 gb ISRT cache, and the other with the rest of the space for the win7 prof 64 bit OS drive.
So my question is if the splitting of the SSD is possible like I mentioned?
and next, what should I pick for a data/app drive? I am not sure whether to go with my usual 2 drive raid-0 setup, or simply get one drive since I will be using ISRT. Any suggestions?
Another note, after I read about booting from USB devices, I plan on skipping the floppy drive
Thank you for any input.

Booting of USB device can be set as a priority in BIOS.
SSD is like any HDD, just do the partitioning during setup.
RAID wise, it is up to your preference. Speed or Mirroring or Balance?

Have OSX & OS 9. Can't change chooser in OS 9 for new printer.

Hi - Here I am hours later. Please help.
I have a new printer ip4200. I am running both OS X and OS 9. All is well with OS X and printer, but I can not get the ip4200 to show up on my OS 9 Chooser. It shows 4 items: AppleShare, FaxPrint, LaserWrier8 and SC777 (my last printer).
I am trying to print from Corel Print House which operates in OS 9 only and cannot.
Thanks much.
Desperate Diane
G4 Mac OS 9.2.x also running OS X 10.2

Hi, Diane. Ralph has the right idea. To print directly from a Classic application, you'd need to have installed an OS9-compatible driver for the ip4200, so you could select that driver in the Chooser. Unfortunately, there doesn't appear to be one.
http://software.canon-europe.com/Printers/BubbleJet_Printers/PIXMAiP420010232.asp
Indeed, the System Requirements for the printer include the following: "Macintosh computer with Mac OS X v10.2.1 or later..."
It appears that the printer probably requires some feature(s) not present in earlier versions of OS X (let alone OS 9) to function. If that's the case, there would be no point in Canon's writing an OS 9 driver for it.
If Corel Print House has the ability to save its documents in a file format that you can open with an OS X-native application (PDF format, for example), you could save them in that format, open them in such an application, and print them in OS X, using the printer's OS X driver. If CPH can't do that, you may have to find an OS X-native application to use instead of CPH. Or you may want to buy an older printer that does have an OS9 driver.

Apple Care Protection Plan for new laptop?

I just purchased a MacBook Pro 13", I was just wondering how long I have to purchase an Apple Care Protection Plan?

Up to one year from date of purchase - however, if you don't buy it withing 90-days of purchase, you'll only get the 90-day phone support. I usually buy AppleCare when I buy a new computer - 3 year warranty, 3 year phone support.
Clinton

HEY APPLE! What are upgrade policy plans for new systems shipping with 10.4

I just ordered a brand new Xserver, thinking that there would be some policy in place for brand new computers shipping with 10.4, to get the new version of OSX Leopard Server (without having to buy a retail copy) - however to my surprise, there is nothing currently in place.
Will there be an upgrade policy soon for users who have just ordered new computers, currently shipping with 10.4??? Or should we return recently ordered items, and stop ordering new systems until they start shipping with 10.5?

Assumptions such as this one are often a recipe for disappointment and/or for extra expenses; I've certainly learned to be cautious with these.
In this case, there is a policy that has been in place (AFAIK) since the Leopard announcement.
For details on and requirements of the Leopard upgrade policy, do read the [Mac OS X Up To Date|http://www.apple.com/macosx/uptodate> web site.
Those folks outside the Leopard upgrade window that are upgrading to Leopard (and that don't have a separately-purchased Right-to-Upgrade) will be purchasing and ordering the upgrade. You may end up purchasing an iLife upgrade, too — if you're using it, and not already at the current release — as Mac OS X and Mac OS X Server upgrades apparently do not include an iLife upgrade.

Plans for new database back end?

Are there any plans to allow the Calendar Server to use a different database other than the Berkeley DB?
Jason Whitener

Core Data is based on sqlite.

Changed MIC in quality plan for new lot.....

Similar Messages

Maybe you are looking for